Sharing files between mac and windows

Hello, I have recently purchased a new mac computer and I would like to transfer files from my old windows computer onto this new one and vice versa. I have tried using an external hard drive to do this, but I found that it can only be formatted to one OS at one time. Does anybody have any ideas of how I can accomplish this? Thank you so much for your help everyone!

I'm not clear as to the current format of the drive. Since you say it is working with MacDrive I am assuming it is currently NTFS. You also say this is for a "new computer" so is this really a Leopard OS computer, making this a Leopard OS question? There's differences in the capabilities of the different systems.
As for MacDrive, if it works and it's the only program then you'll have to pay for it. I'd say if you're just using it this once for this one application you could probably buy a used drive for $50 to allow you to clear some files off the one you want to use and reformat it. Drives formatted to FAT32 can hold files up to 4GB in size and work with both Mac and Windows. Unless this is for video I don't see a severe restriction to reformatting to FAT32 and using that.

Similar Messages

  • Sharing Files between Mac and Windows XP PC

    I have an small office with three computers. There is a new Mac that basically acts as the server. There is a shared folder on the computer. The other 2 computers are PCs. All permissions have been set on the Mac. The other 2 users are set as Administrators on the Mac and have the ability to Read and Write. The other 2 users can access the files, but they are not able to make any changes. The shared folder has may sub folders. Any ideas?

    huh, i used migration assistant to create a user with all my old data. now i have 2 users. anyway, i was putting the old data i wanted (i plan to wipe out the old user) into the shared folder...and it was working fine. all of a sudden, i put files into the shared folder, and when i log in as the new user, i can't use the file. won't give me access.
    i've enabled file sharing, the files and folders are marked as shared, and well...it seems like file sharing is broken.
    ...ideas?

  • Share files between Mac and Windows in same iMac with boot camp

    Hello,
    I am new in using Mac and recently I buy a IMac 24" model.
    I used to use PC a long time with a lot of old document.
    I want to install Windows XP with boot camp.
    But I also want to share my documents, music, video files between Mac and Windows in same iMac.
    How can I do this?
    Thanks in advance,
    Eric

    Hi Eric and welcome to Discussions and the Apple world.
    Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
    However with FAT32 you are limited to a partition size of 32GB.
    Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
    Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
    Regards
    Stefan

  • How to create shared folder between mac and windows

    how to create shared folder between mac and windows

    Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

  • Share files between Mac and Windows sessions.

    Hello,
    I've a business(sales) software(Ciel) which is working on Mac. This software is generating a file which can be exported to another (Ciel) software(accounting) but which only works on Windows. I've made 2 sessions for both operating systems, split hard disk in 2 partitions and installed the both software separately.
    How can I let the windows partition being accessible to writing mode from mac session in order to export the file from mac to windows?
    Thank's in advance.

    You may want to investigate Parallels for Mac. It will allow you to share everything in your Mac with Windows.
    http://www.parallelsstore.com/parallels-desktop-for-mac.html

  • Sharing .itl file between Mac and Windows

    How do I share an .itl file located on a NAS between a Windows machine and a Mac? I can do it with two Windows machines, but one I add a Mac, every time I switch platforms the library rebuilds. Onle one machine is accessing the itl file at a time, all the content is on the NAS, and I have 11.0.2.25 on the Mac and 11.0.2.26 on the Windows machine (can't get 11.0.2.25 on the Windows machine.

    Right now, I have Verizon DSL that uses a Westell router. It has 4 ethernet ports on the back in addition to the DSL connections. I have a HP Pavilion with Windows XP in the basement, an iMac G3 in my room, and an intel iMac in our living room all connected to the router by ethernet cables. Each computer is able to access the other computer's files. On the intel iMac I have Microsoft Remote Desktop installed so that I can log into the HP in the basement and control it from the iMac. I haven't tried operating this network wirelessly, but I would imagine that it would be possible. One thing that you might want to check is the router's configuration. My router has settings that either allow or block wireless signals. To access my router's settings I type in 192.168.1.1 in Safari or Internet Explorer. Having all 3 computers on the internet at the same time does not slow the speed of the DSL very much.
    I hope this information will help.
    20" iMac Intel Core 2 Duo 2.16 GHz   Mac OS X (10.4.8)   250GB HD, 128 MB X1600 Graphics, 1 GB DDR2, DVD+-RW

  • Problem with sharing files between mac and pc

    hi i have been having an issue with file sharing between my mac and pc. my pc running windows 7 can connect to my two macs running mavericks (mbp and mini) but i cannot connect to the pc from my macs. i have file sharing using smb setup on my macs as well as the workgroup setup. i can see the pc in my finder shared tab but when i enter the username and password it loads like its trying to connect and then says cannot connect or sometimes makes you re enter the password and still nothing. i also tired connecting through finder go tab and connect to server but when i type in my ip it asks to input the user and password but wont accept it it just shakes and deletes the text in the user and pass fields. on my pc i have file sharing enabled and like i said i can access my macs no problem. i will give a quick guide of how i try to connect
    Pc name is RAID-PC
    my admin account name is RAID
    pass is: dapice (not actual)
    ip address 192.168.2.20
    when I click on the raid pc under the shared tab in finder i put as the user RAID and pass dapice ....doesn't work
    under the finder go tab connect to server i put smb://192.168.2.20 then push the + and then connect enter RAID as user and dapice as pass... unsuccessful
    i have tired reinstalling windows 7 didn't help i tired installing windows vista and also didn't work
    i have reinstalled mavericks and that also didnt work
    i have spend HOURS looking for the answer and trying all different this with no success any help will be appreciated

    when i go to enter the username and pass it just shakes and makes me re enter
    here is some screen shots from what happends
    that is for trying to connect through shared tab and thi is through connect to server
    after i push connect it shakes and stays the same

  • Sharing files between mac and PC's

    I have an iMac running 10.4.8 and 2 PC's running XP home edition. I am trying to share files between them. They are networked through a router. The mac can see and connect to both of the PC's and I can open files on the PC's from the mac. The PC's can connect to each other and open files. The problem I'm having is connecting to the mac from either of the PC's. They all have the same workgroup name. I have windows file sharing on. Is there something else that needs to be done so the PC's can see and connect to the mac?

    Hi Pat-999,
    To set up a link between Windows XP and the Mac do the following:
    1) Open "My Network Places" on the Windows computer.
    2) Double click on "Add a network place".
    3) A setup wizard will appear. Click next and choose the option to specify a network site, etc. Click Next.
    4) Open the System Preferences on your Mac. Choose Sharing. Under the Services tab, turn on the check box for "Windows Sharing". Click on the Accounts button and activate your account. If sharing hasn't started by itself, click the Start button. Write down the address where it says "Windows users can access your computer at...". It would be something like \\192.168.0.122\username
    5) Enter that address in the wizard at the Windows computer and click Next.
    6) It will take a few minutes for the connection to show up. When it does, give the connection a name and save it.
    In the future, you then just need to have Windows sharing on at your Mac and double click the connection you saved to connect. When you do, a dialogue box will appear asking for the Mac users' name and password to connect. Put in your long name (the same one that appears any time the Mac asks for your password) and the password. A folder will open on the Windows desktop.
    Initially, it will only let you set the connection up for your entire Mac account. So you will see all of the folders within that account. If you want to confine the connection to the drop box, then run the connection wizard again. This time, on the page where you enter the Mac address, you'll have a drop down menu of all of the folders in your account. Choose username\Public\Drop Box and save that connection. Delete the previous one. Now when you connect (using the same long name and password), the folder on the Windows desktop will be confined to the Drop Box folder of your account.

  • Sharing Files between Mac and PC over a Network

    Greetings,
    I have recently made the switch to the Mac, and I have been so pleased with it ever since! I am getting married soon and my wife-to-be has a Windows XP desktop machine. I have been reading up on the different options on sharing files, and I want to ask if someone with experience can confirm what I think I have discovered.
    1. A person on Windows can read and/or write to a Mac OS X formatted drive only if they run Macdrive.
    2. A person running Windows XP can read files stored on a shared folder on the Mac through network sharing without additional software. But can they write to the shared volume on the Mac??
    Now, I know all about the Mac side of things. It can read NTFS, read/write to FAT/FAT32, connect to Windows computers...etc. I have actually done all these things already, and know how to use them. I just want to make sure that I have the right idea before I go into working in the other direction, from Windows to Mac.
    Thank you for any help that you might offer.

    1. A person on Windows can read and/or write to a Mac OS X formatted drive only if they run Macdrive.
    You don't need Macdrive for sharing files over the network, macdrive is only needed for a PC to read a Mac formatted Hard drive that is directly connected to a PC i.e Firewire Drive.
    2. A person running Windows XP can read files stored on a shared folder on the Mac through network sharing without additional software. But can they write to the shared volume on the Mac??
    Yes you can write to a windows sharepoint on a mac this would be limited to their home folder unless you setup other permissions.
    To setup windows sharepoints your best using a shareware utility called sharepoints
    Now, I know all about the Mac side of things. It can read NTFS, read/write to FAT/FAT32, connect to Windows computers...etc. I have actually done all these things already, and know how to use them. I just want to make sure that I have the right idea before I go into working in the other direction, from Windows to Mac.
    It does not matter what format hte pc drives are if your sharing over a network you only need to know about formatted drives if they are directly connected to the computer i.e firewire, or usb drives.

  • Sharing files between Mac to Windows

    Hi,
    I have an ibook G3 with Mac OSX, originally 10.1.5 but recently I upgraded it to Tiger 10.4. The hard drive is about to die (clicking in left corner, applications running slow even though I have enough memory). I'm sorry to say but I bought a Microsoft PC. I've just had so much trouble with my Mac.
    I would like to transfer my files from grad school from my Mac to my Windows PC using an ethernet cable if that is possible. I really don't know much about computers. How does one do this, set up a direct connection between the two computers which are not on any kind of network.
    I really don't want to lose my files and I have already tried some other options. The CD burner on the Mac never worked so I was unable to burn copies of my files directly. I tried using an external CD burner but not all of the files burned, not sure why. I tried transferring the files to a zip disk but when I connected the zip drive to the Windows PC the computer told me it couldn't read the files and would have to reformat the disk erasing all of the information. If anyone has any ideas I would greatly appreciate them.
    Thank you,
    Melissa

    Hi Melissa!
    You have the right idea about using an Ethernet cable. It's the simplest way to transfer files without resorting to sneakernet.
    Do you know whether or not either of your computers has a Gigabit Ethernet port? If so, any Ethernet cable (straight-through or cross-over) will work. Otherwise, get a cross-over Ethernet cable from your local computer store.
    You can plug the cable directly between the two computers and they will automatically assign themselves IP addresses in the same range 169.254.xxx.xxx.
    If your Windows PC is running Windows XP, then it has file sharing enabled by default. If you'd like, create a folder on your Windows destkop, right-click and select Sharing.
    From your Mac, you should be able to go to the Go menu in the Finder and select Connect To Server... Browse to find and connect to your Windows machine. You can drag and drop files to copy them.
    Hope this helps! bill
    1 GHz Powerbook G4   Mac OS X (10.4.4)  

  • Shared files between Vista and Windows 8.1

     I have a laptop with windows 8.1 on it and a desktop with Vista.  The desktop can access the files on the laptop, but the laptop cannot access the desktop files.  The network shows the desktop, but says it is cannot access it.  Is
    there a setting in windows 8.1 that I am missing?  

    Hi,
    Please make sure that you have permission to access Windows Vista computer, and the share from Windows Vista is for public.
    Then, please check following settings:
    Whether these two computers are in the same workgroup.
    Try to turn off the firewall of Windows Vista to check the results.
    Check whether the network discovery of both computers is turned on.
    Check following ports are allowed in Firewall: UDP 3702, TCP 5357, TCP 5358
    If the key restrictanonymoussam under HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Lsa was set to 1 or 2, please change it to 0.
    For other detailed settings, please refer to this link:
    File and Printer Sharing in Windows Vista
    http://technet.microsoft.com/en-us/library/bb727037.aspx
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • Itunes Shared Library between Mac and Windows isn't sharing videos properly

    Hi, I'm a bit new to the mac world, but I'm the proud owner of a new macmini. I also own a Windows 7 machine.
    My problem is with the Itunes Shared library. Itunes 10 on my mac is set up to share everything, including podcasts. I can see these from Itunes 10 on Windows, and I can play music (and audio podcasts), but video is hit or miss.
    Videos downloaded from Itunes U tend to work, lectures and stuff.
    Video podcasts (also downloaded from Itunes Store) and other videos don't work at all. Itunes just doesn't play the video, and doesn't even launch the "black screen". The timer remains at 0.00.
    On the other hand, sharing videos from the PC to Mac works well, i.e. my mac can see the contents of the itunes shared library on Windows and play videos. It just doesn't work the other way around.
    Thanks for reading and I hope this problem can be fixed.

    Woops!
    Here you go:
    http://discussions.info.apple.com/message.jspa?messageID=10923818

  • Useing file between mac and windows

    I am new to Flash. My question is this, if I make
    presentation in Flash on a Mac, can I save the file and then use
    the same file on a Windows laptop for a presentation? I have Flash
    on my laptop (Windows) but my boss is having me make the
    presentations on the company Mac.
    Thank you

    Thank you. I did not know that there was soooo much to learn,
    even though "they" say it is simple to use.

  • Moving photo files between Mac and Windows

    When I upload photos from my camera to my MacBook Pro, and then try to copy some to a Windows PC, I can't access them on the PC.
    Is there a solution to this please?
    Thanks!

    Hi Eric and welcome to Discussions and the Apple world.
    Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
    However with FAT32 you are limited to a partition size of 32GB.
    Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
    Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
    Regards
    Stefan

  • Hidden files between Mac and Windows

    I am evaluating Oracle Content Services to replace a traditional (OS X Server with AFP and SMB) file server. I'm doing some tests and I see that when I upload or change files by WebDAV, files starting with '.' appears. Let say I uploaded a file called 'test.doc', after the upload is complete, a file called '.test.doc' is also created. I guess that they are files created by the Finder on OS X to contains the resource fork, but the problem is that I see those files when I mount the same folder on a XP station.
    Is there a setting somewhere to not display files that start with dots ?

    I haven't seen a filter setting on the WinXP side, but I have seen a setting on the MacOSX side that prevents the OS from creating the "." files on network volumes. If you try to browse an area with read-only permissions, MacOSX will give out lots of warnings on creating those . files.
    and here's a link to a website that talks about the setting http://www.macosxhints.com/article.php?story=2005070300463515.
    I've tried this out and it does work.
    Out of curiosity, have you gotten this to work with Intel based Macs?

Maybe you are looking for

  • NULL2

    when i attended to my viva in project 2 weeks ago.External examiner asked me about NULL2 and also difference between NULL and NULL2? firstly i want to know whether NULL2 is in sql or not?If yes plz answer to my post thanking you sir,

  • Help! MASSIVE MacbookPro ISSUES with all mac softwares - diagnostic report incl.

    Hello all, I have posted something almost 1 year ago but never got a reply.. The issues became so bad lately that even checking emails becomes a performance (for my nerves..) My computer is a Macbookpro from mid-2012 OSX 10.8.5 bought in 2013, in fra

  • Data acquisition from a 250N Load cell

    Hi , I am very new at using the Labview.I am using Labview 6i(PCI 6052E).The load cell(250N) is connected to a pump.The pump has 2 bags.One of them is filled with water and the other is empty.I want to load the bag which is empty from the bag filled

  • FTP connection

    Hi all, I need to connect SAP to PDM server. my issue is to transfer internal table data or csv file from SAP to PDM server. how should i do it. i am trying to use FM FTP_CONNECT and FTP_COMMAND. If it is currect way, please provide me what are the i

  • Whenever firefox opens a new window a bar comes across the screen at the top with the word "allow" or an "X" on the right side. When I use allow, it closes.

    This happens when I have only one tab, or window, open. Example, I am on a site like my banking site, and each time I click for a new operation, the black bar comes on just under my tool bar and asks if I want to allow the move to a new page, but it