Sharing grayed out; admin overview shows not available

My Xserve has suddenly stopped allowing "sharing" in Workgroup Manager, and in Admin, the overview shows "Not Available" in all areas including System Start Time.
All volumes are available over the network but one of them is not showing up even in the finder, and will not show an icon on a user machine.
Any ideas?

Try restarting the AFP service in Server Admin

Similar Messages

  • GWIA in the Admin overview shows not available

    However, the GWIA is available and working correctly. It also shows the correct build dates in the GWIA console.
    Build Dates
    GroupWise Agent Build Version 14.0.0 -115243
    Any ideas?
    Thanks,
    Duggan Roberts

    Kingduggan1,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://www.novell.com/support and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • Wireless Synchroniz​ation in Desktop contact list properties is by default showing "Not Available"​, Not able to change also

    In my Blackberry 8520 - Curve model, Wireless Synchronization in Desktop contact list properties (Go to Contacts, select options, select Desktop) is by default showing "Not Available" and not allowing to change also. My other colleagues are having the options.
    My basic issue is that Outlook contact details are not getting syncronized with Blackberry. I believe this is the root cause for the same. Please guide to resolve the issue.
    with best regards,

    Hey pratiktnm,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Are you setup on a BlackBerry Enterprise Server?  With the Desktop service book appearing it seems you were on one.  If you are still on a BlackBerry Enterprise Server, I would suggest creating a full backup with BlackBerry Desktop Software: www.blackberry.com/btsc/KB33505
    Then proceed with a security wipe by going to Options>Security>Security Wipe and then contact your network service provider to generate a new Enterprise Activation password.  Then proceed with the enterprise activation by going to Options>Advanced Options>Enterprise Activation.
    Once the activation is completed, test out the wireless synchronization of the contacts.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Mozilla quits when I login to Yahoo Mail. I read on a forum that I need to delete npYstate.dll from Yahoo/Shared directory. This .dll is not available in that folder on my system. Strange???

    I read in one of the forums that I need to delete the npYstate.dll file from the Yahoo/Shared directory but this file is not available in this directory on my system. Mozilla still continues to quit when I log in to Yahoo mail.......
    == URL of affected sites ==
    http://www.mail.yahoo.com

    Yup, it just copies all the information on that page to your Windows clipboard, for you to paste anywhere (email, text file, etc.).
    http://en.wikipedia.org/wiki/Clipboard_%28software%29

  • HT1533 my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in

    my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?

    OS X Mountain Lion: If you can’t hear sound from your speakers
    Read the "If you’re trying to listen through external speakers" section.

  • My Safari screen is grayed out.  It does not respond to touch.  How to bring it back to life?

    My Safari screen is grayed out.  It does not respond to touch. How can I restore it back to life?

    Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad by holding down on the sleep button until the red slider appears and slide to shut down. then hold the sleep button until the Apple logo appears to start up.
    You can also reset the iPad by holding down on the sleep button and home button at the same time until the Apple logo appears (takes about 10 seconds) - ignore the red slider.
    Message was edited by: Demo

  • Can someone please help? my address bar is missing. All i have in its place is a grayed out tab that will not allow me enter a URL.

    can someone please help? my address bar is missing. All i have in its place is a grayed out tab that will not allow me enter a URL.

    What browser?
    Is this a Mac Pro?

  • In my contacts, I want to edit information. Some of this information is 'grayed out' and I am not able to delete it - any suggestions are greatly appreciated. Thanks

    In my contacts, I want to edit information. Some of this information is 'grayed out' and I am not able to delete it - any suggestions are greatly appreciated. Thanks

    For example:  SusanX has quit her job and I still have her employment email address and phone number.  All her other information is the same but I want to delete the information no long viable. When I go into edit mode the information is grayed out and is not deletable. I went to my iCloud and tried to delete it there, no luck.
    I am thinking I might just have to delete the entire contact card and just start from scratch with only her current information.  Seems like there should be a way to delete only parts of the information rather that resort to start a new contact card.
    Thanks for your help. I appreciate you taking the time to advise me on this.
    Mona

  • Bluetooth on my MacBookPro shows "not available"

    Hi Guys
    bluetooth on my MacBookPro shows "not available"

    Hello:
    Try resetting the PRAM and SMC.
    Barry

  • Why is my "hide toolbar" in the View grayed out.  I am not able to show the toolbar.

    I cannot keep the Safari toolbar showing.  The "Hide Toolbar" in the View tab is grayed out.  Also, I cannot get the dock to not hide.

    Press the escape (esc) key to exit full-screen mode.

  • Connected wirelessly to Canon printer MX340. Duplex printing option is grayed out for me but not on my daughter's non-Mac laptop or husband's PC which is connected to the printer. Mine has two-sided option available at the Apple store. Any ideas?

    We use a Canon MX340 series printer/fax/scanner. My husband has his PC hooked to it and my daughter prints wirelessly from it with no problem with her non-Mac laptop. I have trouble printing. Often it does not print and I have to delete the job from the queue. Other times it will print OK but two-sided printing is always grayed out in my printing options. When I took it to the Apple store and printed on their network (selecting their printer) the two-sided option was available. Makes me think the printer is set up wrong, but I am not certain. A fw times at home when trying to print I got an error message about incompatible fonts, but it printed anyway after deleting the job and starting over. Does anyone have any ideas? Thanks

    OK, just an update.
    Two years into this, I still find I can only do full duplex printing by using Windows XP running inside of VMWare. I've had occasional, ephemeral luck with duplex printing, but nothing long lasting.
    I've tried this in Tiger and Leopard (now at 10.5.6), and I've had this issue with Canon printers MP780 iP4300 and MP610, direct connected to my Core2Duo 17" MBP. I also have this issue when printing over a network, but that's a much harder problem to solve.
    Currently, this is my #1 most pressing issue for my Mac, because not being able to print from a computer when you print a lot is a really big drag, and using VMWare all the time is also a really big drag. Other people posting seem to be able to print in Duplex using the very same printers. What could be wrong with my MBP? I see the duplex box option, but most of the time it's grayed out as if my printer doesn't support duplex.
    I've tried direct selecting printer drivers from the system preferences, but nothing seems to have an effect. And this is off of a clean Leopard install.
    My wife now has similar problems with her new MBP - the Canon print drivers (CUSP & non CUSP) aren't allowing the Duplex box to be checked.
    I am willing to pay good money to anyone who thinks they can fix this problem.
    Thank you,
    - Jeff

  • Items grayed out when they should not be

    I have some apps where files that should be available for opening are instead grayed out when they shouldn't be. They never used to be grayed out until recently, and they are a correct file type. (Open is set to "All files" not just the file extension, so it's not an oversight).
    Which part of the OS is responsible for choosing what items will be available in a file list (i.e. not grayed out)? I'd like to rebuild it since it seems to be corrupted. Also my LaunchServices seems to be messed up as well because some apps are not available for certain file types "Open With" when they ought to be. Terminal command? Disk Warrior? TinkerTool? Thanks.

    Hi,
    If you aren't confident in using Terminal check out this site for help with Launch Services.
    http://www.thexlab.com/faqs/resetlaunchservices.html
    Carolyn

  • Open in Camera raw grayed out for some tifs not others, bridge

    I searched but could not find a solution. CSR. PC. Windows xp. In CS4 Bridge the option to open with Camera raw is grayed out in the file menu for some tifs and not others - It shows up grayed out on the file menu, but doesn't show at all when right clicking,  even with the files where open with camera raw is not grayed out in the file menu. I have purged the cache, deleted all temp files, closed both bridge and photoshop and still I cannot open the tif in camera raw. It is grayed out. If I go to the pic I touched up yesterday the option is not grayed out. Does anyone know how I can fix this?

    RJ Dougall wrote:
    My intent is to batch process in Camera Raw -- my preferences have always been set to use camera raw for TIF and JPG files, and I have never had a problem accessing Camera Raw either directly in PhotoShop itself, or Bridge.
    Please e-mail me a copy of your response to [email protected]
    Uh, this is a forum...not an email tech support organization...
    As for your issue, it's simply not clear what you are doing or what issue you have. Can you not open the scanned images via Camera Raw from within Bridge? If you can then you will need to go through each image and adjust the ACR settings before you would be able to process them. Depending on how you set up your actions, Photoshop's Batch may or may not catch settings...that part is pretty complicated.
    Also, I would question your use of JPEGs vs TIFFs. I would suggest scanning as 16 bit TIFF and running those through Camera Raw...you will be loosing a lot to scan into 8 bit JPEG and then re-running through Camera Raw. You really want to be sending ACR 16 bit images...

  • Leopard iChat Screen Sharing Grayed out

    Hi there-
    I'm experiencing an issue with the new "Share my screen" feature of Leopard OS X 10.5. I've been able to successfully establish a connection with two other people in both directions (letting them control my screen, and controlling their screen), however have had issues connecting to my father (whom, of course, would be the most useful to have the feature with for support/troubleshooting).
    Basically, in iChat the option to request control of his screen is grayed out when I attempt to connect to him. On his end, his option to share his screen is grayed out. Interestingly, my option to share my screen with him is available and he can request control of my screen, but it never actually connects.
    Are there any firewall ports that need to be open on our routers? Has anyone else seen this problem?
    I have an intel based 24" iMac (the white model), and he has the brand new 20" iMac.
    I wasn't sure whether to post here or in the Leopard Forum, so I'll post in both.
    Thanks for your help!
    Joel

    I've done that, to both iMacs (Intel based) though i still have them grayed out. Before, when the other computer's screen sharing was turned off, and mine was on, i was able to offer him to share my screen, but once he activated his Screen sharing from the System Pref. we both are having the Screen sharing button grayed out in Bonjour and AIM Buddy List.
    Any hints? much appreciated
    Thanks in advance

  • TS1629 ichat screen sharing grayed out

    what do I do to share my screen in ichat? the option is grayed out on my computer. the connection doctor says something about my router not being set right. where can I find a list of steps to guide me from here?

    Hi Tony
    Thanks for the reply. I had him do that, as well as enable "Screen Sharing" in System Prefs>Sharing. For a moment, i had the option to attempt to control his computer, however it didn't connect and now the option is grayed out again. any other ideas?
    Thanks again!
    Joel

Maybe you are looking for

  • Spry Accordion doesn't work properly

    I uploaded the site the other night and it worked out just fine. I made a change in some spacing between two words and added a letter to a word. Then all of the sudden it did not work on my next upload. The link to the page is http://www.tc.umn.edu/~

  • I opened a website and it somehow zoomed in. Now it is in the zoom mode. I do not know how to change it back to the normal mode

    I opened a website and a four arrow cursor opened and it zoomed in. I cannot zoom back out to normal view. please advise.

  • Playing SWF and corresponding FLV on standalone computer

    I have nice results encoding AVI's with Flash CS3 Video Encoder, and making SWF with embedded chapters, in Action Script 3 with Flash CS3 Professional. I put these SWF's and FLV's on DVD; they are nicely played on my computer, in the Adobe Flash Play

  • Error while compiling mx:Module

    Hi, I tried to compile the following <mx:Module> mxml file using the command mxmlc SimpleModule.mxml But the following error is reported Loading configuration file C:\Program Files\Adobe\Flex Builder 2\Flex SDK 2\fram eworks\flex-config.xml D:\Counte

  • Photoshop CS5 Help doesn't work

    I just installed Master Collection CS5 today. I discovered that the keyboard shortcuts for changing Brush Hardness (Ctrl-Option-Cmd) now activates something else. First thing I did was goto Photoshop Help, just to find out that the fancy new Air Help