SHARING INTERNET CONNECTION

I'm trying to share my internet connection. I access the internet over my airport express, I want to share the internet connection via my ethernet port. Can anyone tell what are the procedures.

I'm trying to share my internet connection. I access
the internet over my airport express, I want to share
the internet connection via my ethernet port. Can
anyone tell what are the procedures.
1 open System Preferences
2 select Sharing. You may have a closed padlock on the page. Click it and unlock with your system administrator name and password.
3 select Internet
4 go to the 'Share your internet connection from' pull-down menu and select 'AirPort'
5 go to the 'To computers using' box and select 'Built-In Ethernet'
6 quit System Preferences. If you're asked to save changes, do so.
Warning: be careful how you set this up. There's a reason why Apple posts this warning:
"If your computer is connected to a network, turning on Internet sharing may affect the network settings of other computers and disrupt the network. Contact your system administrator before turning on Internet sharing."
when you try to turn sharing on. Your Mac will be set up as a DHCP server. If there are other DHCP servers on the network, (such as a router) you may create conflicts.
If your network is connected to the internet in the right (very, very, VERY wrong!) way, you can set your Mac up as a DHCP server over the internet. This would tend to make your ISP very, very, VERY angry in a very, very, VERY short time. Can you say 'Termination Of Service'? Knew you could.
Fortunately most home/small office routers, including AirPorts, use DHCP and NAT to prevent this kind of thing, so you have to go out of your way to do it... unless you mess with the settings and do it by accident. You haven't messed with the settings, have you?

Similar Messages

  • Connecting to shared internet connection through Mac osx 10.7 wifi

    I can't get my new HP touch pad to connect to my wireless network. I connect my iMac through ethernet but have a wifi network setup from my iMac so my other devices can use my iMacs shared internet connection. The touchpad will not connect, it finds the network, I put in the WEP key and it states "unable to connect, try again". I am at the setup stage on the touch pad and can't get any further!!. I have tried everything I can think of including creating a new wireless network, disabling and changing the sharing password and re-enabling. all my other devices still log on fine and can connect to the internet through the iMacs connection. anyone got any ideas? 
    Post relates to: HP TouchPad (WiFi)

    alopix wrote:
    I just remembered why I ignored your first post when reading this topic:
    Ad-hoc-sharing can't be the problem, because when I use the exact same method without any WEP encryption, so create an open network, it works perfectly - so it has to be an error in the webOS' handling of WEP or similar...
     I'm curious that the Mac offers only ASCII (key length of 5 characters) or 128 bit encryption, but not 64bit (which has a key length of 10 hexadecimal characters and works perfectly with my touchpad).  <Wiki definition of WEP.>
    This sounds like an old problem we used to have when Palm came out with WiFi-enabled devices. Users would create an ASCII text password in their router, and it would generate a 10 character hexadecimal string that was the true password.  Entering the 5-digit ASCII code would fail since it was a seed, and not the "real" code.. Entering the 10-digit key worked every time.
    By any chance is this what is occurring on the Mac? Do you see a 10 digit code generated anywhere in the setup routine?
    Was the link I provided to you of any help?
    WyreNut 
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Sharing internet connection - HOW?

    I'm sharing internet connection with a PC via netgear. Now we want to add another ibook to the connection. How do I open the network so that it can share the connection? It keeps saying that the network password is incorrect, when it's not... Any ideas?
    Thanks!

    Are you using WEP?
    One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
    In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
    The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
    One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
    Though sometimes not even that works and the HEX key must be used regardless.
    I have found this to be the case with all the Netgear routers I have used.
    AirPort: Joining an encrypted wireless network
    http://docs.info.apple.com/article.html?artnum=106424
    Choosing a password for networks that use Wired Equivalent Privacy (WEP)
    http://docs.info.apple.com/article.html?artnum=108058

  • How do I use Mail on a shared internet connection

    Hello All;
    I've tried searching the forums, and either I'm using the wrong search terms, or this question is so basic no one else is having problems....
    My wife and will sometimes be in a hotel that has an ethernet cable for internet access. We both travel with our laptops (sad life, I know...) and use the internet. We usually plug the cable into her MBP and then I set up internet sharing to my iBook. Which works fine, except that Mail can't make a connection and I have to check my email accounts by going to the browser interface for each. I have several, which is why I set Mail up to work with them. Not a big problem, but annoying. Finally, sitting here in Ottawa I decided to do something about it since I'm waiting for it to warm up a bit - its something like -20C this morning.
    Is it as simple as turning off the MBP's firewall? Or adjusting it? I don't like playing with the security settings, if I don't have to, for her MBP because it is vital for her work.
    We are both using 10.4.11, and as stated above - she has a Mac Book Pro and I'm using a G4 iBook.
    Thanks in advance....
    Brrrrr - its cold out there.....

    Hello Seth.
    I believe you must go to System Preferences > Sharing > Firewall on the computer that shares its Internet connection and enable the ports that Mail needs, i.e. click on the New button, choose Other from the Port Name popup menu to name that setting however you wish, and specify the port number(s) there.
    Also, go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list on each computer.
    You may also find the following articles useful:
    TCP/IP: Ports And Firewalls Explained
    "Well Known" TCP and UDP Ports Used By Apple Software Products

  • Why does my iPhone not show up in iTunes on a mac that has a shared internet connection from another mac?

    I have what I would consider a difficult question. I called Apple Care and after she spoke to a senior advisor,the representative ended up saying it wasn't possible.
    Having said that, I'm sure this is not a difficult question for people with networking expertise.
    Setup
    So...I have a MacBook receiving a WiFi signal via AirPort.
    In System Preferences, I have turned on Internet sharing (share airport over Ethernet).
    I connected the Ethernet port on my MacBook to the Ethernet port on my MDD PowerMac G4.
    At this point, I can successfully browse the web, perform software updates, and view other computers and iTunes libraries on my network from my G4.
    Goal
    However, in iTunes on my G4 I would like to use iTunes DJ.
    Tried
    So...I click on iTunes DJ.
    I set the settings (button in bottom right) to allow guest remotes, etc.
    I turned on iTunes Home Sharing (logged into the same account as by iPhone).
    Problem
    However, from the Remote app on my iPhone, I am unable to see the library on my G4.
    Also, if I want to pair my iPhone Remote app with iTunes on my G4, I click add Library in the Remote app, but iTunes on the G4 never displays my iPhone in the left column (although I am able to see all other iTunes libraries being shared on the network).
    Thus, I cannot connect to iTunes as a guest Remote, nor can I connect as paired remote.
    I have successfully done both of these things with computers connected directly to my modem, as well as with computers connected via WiFi.
    The problem is connecting devices to computers that get their internet connection though another computer via internet sharing.
    Question
    So my question is about Internet sharing itself. Is it not a fully featured ad-hoc network? Does it only provide browsing capabilities and the ability to browse networked computers, but NOT devices such as an iPhone? I don't see the difference; my iPhone is on the same network as the computers, so why is there no communication between it and computers that gain their Internet connection through another computer?
    I really hope someone out there who is an expert in networking can help me out with this. Or if it truly is impossible, if someone could explain to me why that is the case, I would also appreciate it.
    ps. I usually have my MacBook sharing its Internet connection through an old router that I am using as a switch because I share the connection with three other computers. And if it isn't obvious, the modem is downstairs, and the MacBook, old router being used as a switch, and other computers are upstairs where there is no Ethernet wired.
    Thank you in advance for any help.

    Phone not recognised in itunes
    iPhone not recognised by iTunes on PC
    iPhone not recognised by iTunes on Mac

  • Sharing internet connection from MacBook Pro to iMac G3

    My goal here is to connect my iMac G3 (that I just got) to my cable internet connection. However, there are some hurdles in doing so. On the other side of my house lies my modem. It's connected to a D-Link wireless router to give my PC, Xbox 360, Wii and MacBook Pro internet all at the same time. It's too far to drag an ethernet cable, and the iMac G3 doesn't have an AirPort card (and $99 for a used wireless b adapter is ridiculous).
    From what I've gathered online, OS X can share it's internet connection with another Mac via FireWire, ethernet or AirPort. AirPort is out of the question since that's how my MacBook Pro connects to the net, and since the iMac G3 doesn't have an AirPort card. I don't have anything that uses FireWire, so othe port on both machines is free, but I also don't have a cable to connect the two. I do, however, have a few spare ethernet cables, so I'd like to get this setup using them.
    Thing is, I can't get it to work. Simply enabling internet sharing in System Preferences does diddly squat, and no connection is found with Network Utility on the iMac. What I'd really like here is for someone to either instruct me on how to get this to work, or point me in the direction of such an article. I haven't been able to find anything with Google so far...
    Now, my MacBook Pro obvioously runs 10.4.9 with all the updates. The iMac G3, however, is running 10.3.5 at the moment. While I will be upgrading it to tiger in the near future, I kinda wanted to play around with Internet Expplorer before doing so. Being new to the Mac and all (the MBP is my first Mac), I've never used Internet Exporer on the Mac -- or 10.3 at all really, for that matter. So if it can be done, I'd like to do this with 10.3 still on the iMac, though I could upgrade it to tiger if I HAD to.
    Should it matter, the iMac G3 is a 400MHz indigo unit with 256MB RAM and a 10GB HDD. It's the summer '00 model. The MacBook Pro is a revision A system with a 1.83GHz Core Duo inside. More detailed specs can be found within my profile on here, I believe.
    Sorry for such a long winded post...
    1.83GHz MacBook Pro 15"; 400MHz iMac G3 Indigo   Mac OS X (10.4.9)  

    I don't have anything that uses FireWire, so othe port on both machines is free, but I also don't have a cable to connect the two. I do, however, have a few spare ethernet cables, so I'd like to get this setup using them.
    Lost me there... is it Ethernet cables you're using even though it's too far? Or What?
    Should be no problem Sharing the Internet connection from 101.4.9 to 10.3.x.
    Just waiting for more info or clarity.

  • Airport network and sharing Internet connection

    Hello all,
    I have hit this problem with sharing an internet connection on an airport network. Maybe its a simple fix, maybe it a "can not be done", answer.
    My set up may be a little hard to describe. To explain, completely wireless set up in my network, 1 x imac and 1 x powerbook, all on airport and using an airport express. This includes my new printer. All connected through airport express network, call it network A.
    Up till now i had a modem with an ether net cable plugged into the airport express. All was fine.
    I am in jakarta, the cable internet providers here are hopeless, slow connection speed.
    Last month a new wireless internet service was released. Called 3.5 G. Its lightning fast and reliable. Basically you get a wireless USB modem attach it to your computer and you are always connected to the internet wirelessly. You can travel anywhere with it. The 3.5G is primarily for mobile phones but i use it just for internet. This modem is connected to my powerbook and works great.
    Now, the useless cable internet connected to my airport express is still connected for my Imac to use.
    My problem is that i would like to share my high speed internet connection from my laptop to my imac. Problem is that when i allow sharing from my laptop, the intenet works fine on both machines but on the powerbook, which is doing the sharing you get an arrow symbol through the airport icon at the top.
    The laptop can NOT access the local airport express network A. Hence i cannot use the printer or see the imac. That is my problem, i cannot print from the powerbook unless i stop sharing. When you share an internet connection the sharing computer seems to create another computer to computer network and does not join the existing arirport network.
    This is probably a little confusing. Hopefully, someone may have some ideas. My alternative is to buy a new fixed position modem/router for the 3.5G system. Its about $600. Ouch.
    Any ideas
    thanks for the interest.
    joe

    Selamat Phil Smith,
    Actually do we know each other, cause i know a phil smith.
    Actually an ether net cable is OK for the short term. But if i get another computer it may get complex. Spent a lot removing cables too.... Looks like i will have to buy the special modem router... Painful $600.
    This share internet thing over airport looks like a great idea till you realise it disables access to the ariport network for the computer doing the sharing.
    Cheers and thanks for the idea
    joe

  • Using a shared internet connection?

    my workplace doesn't have a wireless network, but i can plug in my macbook and was hoping to use it as a wireless network for my ipod touch. i enabled a shared ethernet connection via the airport on my mac, but my ipod touch doesn't find it as a wireless network.
    am i doing something wrong?

    Airplay from what?  iTunes or iPad?
    I assume iPad - in this setup the iPad and AppleTv will be unlikely to be able to see each other on the hotel network even if both are connected wirelessly.  If they can and you don't have a user/room  specific login I'd be concerned about other users seeing my devices too.   These things are generally designed for single user access not to create your own local network.  I suspect in the T&Cs for the wi-fi service it may preclude sharing the internet connection with another device, but if it works....

  • Sharing internet connection with powerbook and nintendo wii through airport

    i have been trying to share my internet connection from my imac to my powerbook and nintendo wii. i've been unable to accomplish neither. i've opened the sharing preferences, chosen "share your connection from built in ethernet" which is how my imac is connected to the internet, and then chosen "to computers using airport". if i then set my airport options to automatic channel, encryption using 40 bit wep and set a 5 character password as it says if you "plan to share your internet connection with non-apple computers", (and then turn internet sharing on) shouldn't i be able to connect either/both my powerbook and my nintendo wii? or is it necessary to have some other piece of hardware or go through some other steps?
    thanks in advance for any help.

    I got a macbook for college and I had the same problem with connecting my Wii to the macbook's connection. But lo and behold, the internet's a wonderful place! I tried this out (http://www.macosxhints.com/article.php?story=20070514152251515) and it worked! I'm not sure about the powerbook bit though, sorry. Hope it works for you too.

  • Problems with sharing internet connection via usb

    I have been sharing the internet connection on my iPhone 5 via usb to a PC for a few years. When updating to iOS 8.3 and iTunes to 12.1 (from iOS 6 if I remember correctly) the internet sharing through usb stopped working. Sharing through wifi works and settings are the same as when usb internet share did work. Any idea on how to solve this except downgrading?
    For my troubleshooting, has anyone been able to share internet via usb to PC (or Mac) with iOS 8 / iTunes 12.
    PS I have unliited cellular data and iPhone is my only internet connection at home,

    Mark,
    There is a excellent book that teaches you how to do this (and other things) called Mac OS X Tiger: The Missing Manual (others of course)
    If I remember correctly (book is on loan)
    1: System Preferences>Network>Show>network port configurations (click unlock)
    2: Click>Built in Firewire and drag to the top of the list (why I forget why)
    3: System Preferences>Sharing>Internet>Share your connection from: Built in Ethernet (or what your using for your connection in) >To computers using: Built in Firewire>Start
    4: Mac #2>Hook up Firewire 400 cable>System Preferences>Network>Location>New Location
    5: Show>Network Port Configurations>Drag Built in Firewire to top of list and enable.
    6: I also think you have to enable Personal Web Sharing on the Mac hosting the internet.
    anyway play with it, you'll figure it out. if someone doesn't get to you.

  • Having problems sharing internet Connection from Macbook to Vonage Adapter

    Hello,
    I just got my Vonage adaptor and I am trying to share the Internet connection from my Macbook Pro (10.7.3) to the Adaptor to use the Vonage service bc my router is downstairs.
    I turned off my Firewall, hooked my Vonage adapter to the Macbook with the ethernet cable and then went to Sys Preferences > Sharing > Selected Internet Sharing > Share Connection from Wifi to computers using Ethernet, and it looks like everything is ok but when i try to use the phone which is connected to to Vonage Adapter, it says "Your Vonage device cannot connect to the internet, check to see if your high speed internet is down".
    I went and looked at my Network preferences and it shows Ethernet connected which is the Vonage Adapter and gives the following:
    IP Address: 169.254.163.167
    Subnet Mask: 255.255.0.0
    Is there something Im doing wrong? Ive seen on several forums that its possible to do but having bad luck. Any help is appreciated.

    All I know is that I got Ubuntu to share internet and offer IPs through DHCP by using Firestarter. I am very new to Solaris, however, and am looking forward to learning about it. I've just made it my regular desktop environment. Long as you can get Solaris to configure its network interface with DHCP after your Ubuntu is configured, you should be able to share to as many clients as you'd like. Fedora also works well for that, and in my opinion, it's a better Linux than Ubuntu, though Solaris remains a better Linux than Linux, right? Har.

  • Problems sharing internet connection - works only one way...

    hey all,
    i'm having a problem sharing my internet connection between our "new" iBook G4 and "old" iMac G5. (both machines are running 10.4.10.) i've seen several posts here that seem related, but no answers that have worked in my case.
    here's the gist:
    ideally, i'd like share the internet connection from the iMac (from our cable modem) to the iBook over the airport. so, i've set up the iMac to do this under "sharing" in system preferences. i then set up the iBook to connect to this new wireless network. under "network status", it says the iBook is connected to the iMac's network, but that the iBook doesn't have its own IP address, so it can't connect to the internet.
    oddly, when i reverse the process - i.e. plug the modem into the iBook and share the connection over the airport to the iMac - it works fine. the iMac gets its own IP address and can see the internet.
    a friend suggests that somehow the iBook is set up to distribute IP addresses as a router, but the iMac isn't. fine. but, i don't know how to make changes to that function.
    any thoughts?

    well, it's taken all day - many, many attempts. but i've finally found something that worked. the answer was burried in the middle of this guy's blog page:
    http://www.tuaw.com/2007/03/26/how-to-using-your-mac-as-a-nat-router/
    he says:
    "I've turned off DHCP and set the address to: 192.168.0.1 and the subnet to 255.255.255.192 In making these choices I was following a hint that appeared at macOSXhints back in 2002. Once this is done I went back to the Internet tab of Sharing Preference Pane, select en4 and start it.
    "Now on my other device (in this case a Xbox 360) I set it up as follows:
    "IP address: 192.168.0.2 subnet: 255.255.255.192 (this is the same subnet of the en4 USB interface, above) gateway/router: 192.168.0.1 (this is the address of the en4 interface) DNS: 192.168.2.1
    "(here's where the voodoo comes in, I have no idea why this DNS setting works. You would think it should be 192.168.0.1, or even the DNS server of my ISP, but those simply do not work. I suspect that it has something to do with sharing over Airport as well).
    "I've also found that this will only work properly if Internet Sharing is active for my Airport interface. If I turn off the Airport interface (en1), the wired interface (en4) also dies. With these settings in place, everything seems to work properly. Keep in mind you may also need to enable certain services (which will vary with your application) in the Services tab of the Sharing Pane:"
    i wasn't trying to solve quite the same problem he was, but by manually inputting the IP addresses, etc, that he did, as well as randomly enabling other "sharing" options (FTP access, etc) which seemed unrelated to internet sharing, it finally worked.
    can anyone explain what this is about? it all seems pretty cryptic to me. i'm not sure what i even did...
    no complaints, but it would be interesting to know.
    thanks!

  • Problems sharing internet connection over airport

    Hi everyone-
    I've researched the heck out of the forums and still cant figure out what's happening with my system. I've got a MacBook Pro with OS 10.5.2. In previous OS versions (10.4) when I was successfully sharing my ethernet internet connection, the airport icon in the status bar showed a vertical "up" arrow, indicating that my connection was being shared.
    I'm trying to do the same thing in OS 10.5.2 but not succeeding in getting the same notification. I'm finding that when I access the "Sharing" folder under "System Preferences" and select "Share your internet connection from: ethernet" and "To computers using: Airport" that both settings grey out, the "Internet Sharing" button turns green and the status says "On", but no sharing occurs. I've checked using other wireless laptops and a wifi finder, but no signal from my MacBook is ever found.
    I've deleted my preferences folder to start fresh, no help. I've tried sharing from different ethernet sources, no help. It just feels like the problem is in the OS somewhere, not with the internet connection.
    Any insight or help would be greatly appreciated! Thanks!

    seems like i got the same issue as u and i just posted it:
    http://discussions.apple.com/thread.jspa?threadID=1425809

  • Problems sharing internet connection through Airport with a PS3

    Does anybody know how to share an internet connection wirelessly with a PS3? I've tried everything including following directions from the tech support people from both Sony and my ISP (Verizon) and nothing works. Last time I've talked to Verizon I've obtained a IP number from them as Sony recommended and that did not work either. Is anybody out there with a PS3 sharing the internet connection through Airport successfully? I'd really appreciate any help. Thanks.!!
    Message was edited by: pbranda

    Let's double-check your Mac's Internet Sharing settings ...
    To setup for Internet Sharing (Wired to Wireless):
    Setup the Network
    Cable Modem > (Ethernet cable) > \[Ethernet port] Mac > (wireless) > PS3
    Enable Software Firewall
    System Preferences > Security > Firewall
    o Block all incoming connections (enabled)
    Enable Internet Sharing
    System Preferences > Sharing
    o Select "Internet Sharing" from the options in the left column
    o Share your connection from: Built-in Ethernet
    o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
    AirPort Options...
    o Network Name: <anything you want>
    o Channel: Automatic
    o Enable encryption (using WEP) (optional)
    o Password: (optional)
    o Confirm Password: (optional)
    o WEP Key Length: (optional)
    o Click OK
    o Select "Internet Sharing" again
    o Click "Start" to start Internet Sharing
    o Click Start

  • Sharing internet connection over bluetooth

    i have 2 computers less than 10 metres apart, one of which is connected to the internet broadband. the solution for sharing the connection wirelessly with this particular setup is rather expensive.
    i was wondering if it would be possible to share the internet connection on the computer that has it over bluetooth with the other computer.
    i read an archived response suggesting that it was. can someone confirm?
    just to be clear:
    i hoping to have 2 computers bluetooth connected the second of which will be able to connect to the internet via the 1st computers connection.

    While it is not explicitly supported by OS X, both machines can be configured to do this. For lots of reasons, I don't think that this is a good idea. Your Bluetooth link is so slow compared to either a wireless—or even much faster terrestrial—ethernet link, that it's not worth the effort to enable this service.
    Save yourself a great deal of grief and disappointment, and get ahold of a relatively inexpensive ethernet gateway [wired or wireless] and set up a small local area network. You will be far more secure, and enjoy a far better level of performance than you would see if you attempted to create a Bluetooth LAN.
    That said, here is a set of instructions for enabling internet sharing using Terminal commands. It's paraphrased from…
    http://www.macgeekery.com/hacks/pppoverbluetooth
    In the Bluetooth preference pane's sharing tab, make a new Serial Port Service and name it bt-ppp and make it an RS-232 device. If it's on, disable internet sharing in the Sharing prefpane. Then create the following script [shown below.]
    The script starts pppd on the new Bluetooth serial device you've created, then sets up IP forwarding, NAT, and the like. The en0 can be replaced with en1 if your primary net connection is AirPort. You can change the IP listed to something appropriate for your network, as well. If you put it in the range of IPs you're already using for your home network, natd is smart enough to work as a router instead of a gateway. Run as root, but—for the love of all that is holy and just—use sudo instead of su.
    This is the script you must run in terminal:
    /usr/sbin/pppd /dev/tty.bt-ppp 115200 noauth local passive proxyarp asyncmap 0 silent persist :10.1.1.25 &
    /usr/sbin/sysctl -w net.inet.ip.forwarding=1
    /usr/sbin/natd -same_ports -use_sockets -log -deny_incoming -interface en0
    /sbin/ipfw add divert natd ip from any to any via en0
    If you are unfamiliar with issuing commands from the Terminal or are not familiar with what these unix commands mean, I would suggest that you proceed very cautiously, and do more research before attempting this.

  • Sharing internet connection using 4200 speedstream with airport express

    I have xp windows sp2 loaded on a desktop with ethernet connection to a modem and have a macbook pro laptop using airport express. I have to reset the modem to full bridge mode to access the internet when using airport express wireless connection,this disables the connection to the internet on my desktop ( the error displayed is low conductivity through the modem). To get my desk top to work on the internet I have to reset the modem and set it to optus bridge. This allows access to the internet but disables my airport express connecton.
    Is there a way to allow sharing my connection to the internet without reseting the modem.

    G'day mate,
    The SpeedStream 4200 supplied to Telstra BigPond customers is a single user device, connect it to a 'Switch' or 'Router' to share the Internet Service or, replace the whole thing with an ADSL2+ Wireless Modem Router and get coverage all over your house.

Maybe you are looking for