Sharing Internet with xbox 360

Hi, I have my Powerbook sharing internet with my Xbox 360. The connection works well and I am able to play games, but the NAT is listed as Moderate, with a Moderate NAT I am not able to do private voice chats with people. Does anyone know how I can get my NAT to Open? Also, I would like to share my media with my Xbox that is stored on a Windows XP computer. I followed all the steps given at www.xbox.com/pcsetup, but the Xbox still does not see the computer.
Any help would be appreciated, Thnx

If you are using Internet Sharing on your PowerBook you can forget trying to modify NAT settings or make nearly any other adjustments. There are very, very, very few options.
If you want to make adjustments like that you need to get a real base station.

Similar Messages

  • Sharing Internet with Xbox 360 *DNS* -- Previous Posts Didn't Help!

    I am running OSX 10.5.1
    I want to share my laptop's wireless connection with my xbox via the ethernet port.
    My router's IP address is: 192.168.1.1
    My PowerBook's airport IP address is: 192.168.1.3
    Under Sharing, I have set it to share my Airport with Ethernet.
    *In the ethernet network panel of my PowerBook, my settings are:*
    Configure: Manual
    IP Address: 192.168.2.1
    Subnet Masks: 255.255.255.0
    Router: 192.168.1.1 (if this is left blank, the xbox can't correctly obtain an IP address, don't ask me why, and occasionally, it stops my laptop from getting internet... weird)
    DNS Server: BLANK
    Search Domain: BLANK
    *On my xbox, I have set it to:*
    IP Settings: Manual
    IP Address: 192.168.2.2
    Subnet Mask: 255.255.255.0
    Gateway: 192.168.2.1
    DNS Settings: Manual
    Primary DNS Server: 192.168.2.1
    Secondary DNS Server: 192.168.2.1
    it gets as far as obtaining an IP address, but it fails the DNS check!!!
    I am at my wit's end!!!
    What can I do!?!?!?! I have tried everything.

    I'm not sure I can help troubleshoot your issue specifically, but I just went through the same process it sounds like you're trying to do and I found the following link to be very helpful:
    http://www.xbox360forum.com/forum/showthread.php?t=20812&highlight=share+wireles s
    2.0 GHz Macbook, 80 GB HD, 2 GB RAM   Mac OS X (10.4.8)  

  • Share macbook internet with xbox 360

    hi i got a xbox 360 recently and i do not want to buy the expensive network adapter. i use to use a toshiba laptop to connect the xbox to internet but now i have a macbook and i need to know how to configure it. if you know how to configure your xbox 360 to share your macbooks internet connection to connect to xbox live please help me thanks.

    Have a look at this YouTube Video.

  • Sharing Connection with XBOX 360.

    Here's what I want to do: Get xbox live working without buying a wireless adapter.
    Here's how I'm connected: My laptop is connected wirelessly through Airport. I have my xBox plugged into my laptop. After I plugged in the cable to my laptop, here's what I did:
    Went to system pref. > sharing. Share my connection from: Airport to computer using Built in Ethernet. Then I 'started' this sharing. When I went to check my xbox network settings, the IP address failed.
    What am I doing wrong, here? I searched the forums for the answer, and I figured that was all I had to do, but apparently not? What else should I do to get my xbox to receive internet / an IP address?
    Macbook   Mac OS X (10.4.8)  

    Hi
    It requires manual setup, for some reason OS X can't provide the XBOX an IP automatically.
    Setup Mac OS X Ethernet to a manual address i.e. 10.0.0.1. Set the Subnet Mask to 255.255.255.0. Leave the Gateway / Router, DNS, ... empty
    Setup the XBOX manually. Go to the Dashboard and move the the System tab-->Network Settings-->Edit Settings. Make the IP manual i.e. 10.0.0.2, Subnet 255.255.255.0, and the Gateway / Router 10.0.0.1. For DNS settings, most use the router's IP address, i.e. 192.168.2.1, but you can also use your ISP's DNS if you can find out what it is.
    Now, make sure Internet Sharing is started and setup to share your Airport connection to Ethernet.
    NOTE: You can find your router's IP by going to the TCP/IP tab of the Airport network settings.

  • No ip with wrt54gl with Xbox 360

    I'm stumpped. Brand new, version 1.1 wrt54gl.. replaced my old dlink one which worked fine for my 360 wrt54gl will not give my 360 a ip address. everything else on the router works fine. this is all wired. tried statically assigning one.. no go dmz.. -- no go. checked wires.. tried different ones... everything else gets an ip. tried turning firewall off.. UPNP off and on.. plug back my dlink.. works fine.. can connect to xbox live and play. i hate to return this, but any ideas? is this just not compatible with xbox 360? please help!. -Bmac6996

    Try this link to configure the X-BOX .....

  • Connecting with Xbox 360

    is there a reason iPhones won't connect with Xbox 360's like iPods did?

    Because even though it plays mp3 and has ipod capabilites...it's a phone! Were you able to connect your previous cell phone to your Xbox?
    Message was edited by: iphonechik

  • Is the Plantronics - GameCom 377 Headset compatabile with Xbox 360?

    is this head set compatabile with xbox 360, the specs on best buy.com do not say!
    Plantronics - GameCom 377 Over-the-Head Stereo Headset
    Model: GameCom 377| SKU: 8978403
    Customer Reviews:  4.0 Read reviews (83)
    <script type="text/javascript"></script> <script type="text/javascript" src="http://images.bestbuy.com:80/BestBuy_US/store/js/jQuery/plugins/jquery.cj-object-scaler.min.js"></script> <script type="text/javascript" src="http://images.bestbuy.com:80/BestBuy_US/store/js/jQuery/plugins/ku4j-min.js"></script>
    <script type="text/javascript"></script>
    Shipping: Usually leaves our warehouse in 1 business day
    Estimate Arrival Time ›
    Store Pickup: Check Stores ›

    Hey kole71,
    That particular model of Plantronics is compatible for PC gaming but not Xbox 360. Plantronics does have some headsets that work with 360, and I've attached a PDF of the chart found on their website. Hope that helps!
    Mariel|Community Connector | Best Buy® Corporate
     Private Message
    Attachments:
    gaming_portfolio_data_sheet_us.pdf ‏1235 KB

  • Linksys WRT54G compatible with XBOX 360's Wireless Network Adapter?

    Is the Linksys Wireless G Broadband Router (WRT54G) compatible with XBOX 360's Wireless Network Adapter?

    Use the LAN port and cable. That way you'll get no interference and great data transfer. Or this maybe helps. http://www.xbox.com/en-US/support/connecttolive/xbox360/homenetworking/equipment.htm
    Message Edited by iknownothink on 06-21-2007 03:44 AM

  • Satellite A300-1OM - Media sharing with XBox 360

    I'm having some real problems sharing my media with my Xbox 360 using my wireless home network.
    I used to connect my 360 to the internet via internet sharing with my laptop connected via Ethernet. I am now borrowing a wireless adaptor for the 360 which still allows me to connect to the internet on the 360, but I can no longer access my laptops music library or find a Windows Media Centre PC when searching the network on my 360.
    My laptop is running Windows 7 64bit. When I view "network" my own laptop appears, my second laptop connected to the network is also shown and the 360 is also shown under media devices. Under "Media Streaming Options" my 360 is also listed and given full access to my laptop media.
    When my laptop is connected directly to my 360 via Ethernet the music library and video library works fine, as does Windows Media Centre.
    Does anybody know of any solutions to this issue? I'm assuming this is just going to be an issue with some settings on my laptop as opposed to an issue with my Xbox. Any advice much appreciated!

    OK, agreed this may not be in the correct forum, but it may be a notebook problem so I thought I'd ask here where people with the most Toshiba knowledge would read it. Let's not lower this forum to the standards of discussing the choices of games consoles though :)
    I risked all and turned off my firewall and all my protection software, still no progress though. It really doesn't make sense that my notebook even displays that there is a 360 on my network whilst it's connected to the network yet the 360 can't detect the computer when I ask it to search the network for one.

  • Time Capsule with Xbox 360 Live

    Hi,
    I just bought a Time Capsule and it works perfectly except that my NAT type on Xbox Live is now set to strict instead of open. It takes forever to join a online game so it's really annoying me.
    This is my setup:
    ---> Modem ---> Wire from Modem to Time Capsule (in WAN port) ---> 1 wire from TC to PC and 1 wire from TC to Xbox 360
    My PC is running on Windows 7 and I'm using AirPort 5.5.3.
    I've tried pretty much all the tutorials I could find online, but unfortunately none of them seem to work. I've set connection sharing to 'share one public IP-address', enables NAT port mapping protocol, added the Xbox Live ports in the Port Mapping Assistant, and my Xbox is using the IP which I set in the mapping assistant.
    Has anybody got an idea what I should change to get my NAT type to open? Thank you in advance.

    Does your ISP allow pppoe connections?
    If so you can setup the 546 in bridge mode.. just use the internal setup wizard, choose bridge, and finish the wizard. Then in TC choose internet tab and for connection type use pppoe and put in your ISP username and password.
    This is perhaps the best method. But it depends on the ISP using pppoe which is common in some places and rare in others. For instance in Australia where I am, all our ISP provide pppoe, and most do pppoa as well. In UK and many places in Europe, they use pppoa, which cannot be bridged to a router. So you must bridge somewhere else or use a different technique of handling the problem.
    The problem with the 546 in router mode, is that it uses cone nat. This starts to get complicated but some games depend on port forwarding of UDP protocol packets. You can indeed setup port forwarding or upnp in the speedtouch to handle this, but it still fails. There are special commands required to allow port forwarding through NAT.
    See this thread.
    http://forums.whirlpool.net.au/forum-replies.cfm?t=1739702
    Although it relates to a different model on a PS3 the basic issue is identical across all the thomson modem products.. and I am very pleased to finally be able to offer a solution. I worked hard with people who actually owned the box to track down the problem and find a solution.

  • Connecting iBook's internet to Xbox 360?

    I know this may be a long shot, but is there any way for me to use my iBook's wireless internet connection to set up live on xbox 360? thanks

    Actually yes. That's what I do when I go to my friend's house and his router isn't anywhere near his TV. I understand not wanting to drop $100 bucks on a wireless adapter.
    First you need to enable internet connection sharing for the ethernet card. Go into System Preferences then Sharing. Go to Internet tab and select to share your Airport connection. Make sure you have Built-In Ethernet selected below and click Start.
    Then you need to setup the ethernet card that you will use to plug your xbox 360 into and i always opt for manual setup rather than DHCP for internet connection sharing. Go into System Preferences and then "Network." Click on the "Built-In Ethernet." Click "Configure" at the bottom. Where it says "Configure IPv4" select "Manually."
    Set the network cards ip address to 192.168.2.1 and subnet mask 255.255.255.0
    Set your xbox 360 to the following
    Go into your System Settings blade and select Network Settings. Edit, then make sure you select manual. After you enter the IP, Subnet, and Gateway. Just test it to make sure those clear. Your DNS won't pass right away. Then go back to the settings and select to edit your Primary DNS to the address below.
    IP address 192.168.2.2, Subnet mask 255.255.255.0, Default gateway 192.168.2.1, DNS 192.168.2.1
    I usually don't get as fast a connection as I do any other way but it works. If it works, hit me up on Live with FR at SG Big Pun.

  • WRT54G version 8.2.03 WITH XBOX 360

    HI I Have a problem with my xbox 360 when we play the xbox 360 we lose all access to are wireless computers, when we turn the xbox off all wireless connections are back is there a setting that has to fixed somewhere thanks.

    You need to upgrade your router's firmware...
    Download Firmware 1.67 MB...
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    xbox settings : 
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
    Leave username blank & in password use admin in lower case...
    Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
    1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    2) On the second line in Application box type in PQR, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    3) On the third line in Application box type in XYZ, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...
    4) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
    5) Click on set-up and change the MTU Size to 1452 and click Save Settings...
    6) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
    IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
    7) Also assign the DNS Addresses on the Xbox
    Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
    8) Turn off your modem, router, and Xbox...Wait for a minute...
    9) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

  • Connect Imac wirelessly with Xbox 360

    I've got the Wireless Networking Adaptor for the Xbox 360 but I need my Network Settings to connect to my Imac.
    The instruction books says I need the following:
    Workgroup Name
    802.11g/b Network
    Wireless Network Name(SSID)
    802.11a/b Network
    Wireless Network Name(SSID)
    Wireless Security Setting
    Where on earth do I find these?
    Thanks in advance

    Duane:"In the AirPort discussion area it has became clear that this does not work. OS X's Internet Sharing does not properly support the Xbox's attempt to connect to an on-line gaming network."
    Sorry,that is complete rubbish.I eventually worked out all i needed was my WEP key found on router and within 5 minutes I was connected to XBox Live an working like a dream.Also added Connect 360 so I can view my movies.photos and my music transferred wirellessly from my IMAC to my TV via my Xbox.
    FANTASTIC!

  • E3000 Setup Issue with Xbox 360

    I just got my new router and went to setup it up. I put my laptop next to the router and followed the directions on the disc, once the install was done i could not access cisco program on the laptop. I decided to access the web base setup panal to get the 5ghz channel set up for my Xbox and leave the 2.4 channel alone.
    My xbox shows that it is connected to the router but it won't get past the internet portion of the test.... I have found no posts about this issue, and plenty of port forwarding posts. Anyone think that port forwarding would help this matter?? I have 1 xbox 360 that i want on the 5 ghz channel and the rest of my stuff i had setup on the 2.4 ( ps3, ipad, ipod, laptop ) . At one point i couldn't even access the internet from those items. I did a full reset on the router and tried installing the program again with no joy...
    I reconnected my old router for the time being and it all worked fine ( WRT110 model )....  I am out of ideas

    Its always worth a shot, but i ran into sorta the same problem with the WRT110, when i tried to run it on N only for the Xbox.... Thats why i got this one so i could run my xbox on N 5ghz and the rest on B/G 2.4.... Thanks for the feedback, i will give it a shot and see if there was somthing i missed.

  • Sharing Internet with AirPort

    Hello
    Okay to start my iMac here is connected directly to a DSL modem with no router through Ethernet. I saw that you can share Ethernet connections and use AirPort to create a Computer-to-Computer network and enable internet connection sharing. Would this work properly with a Windows XP computer with a wireless card in? I want to be able to get that computer on the net.

    Okay to start my iMac here is connected directly to a
    DSL modem with no router through Ethernet. I saw that
    you can share Ethernet connections and use AirPort to
    create a Computer-to-Computer network and enable
    internet connection sharing.
    System Preferences > Sharing > Internet
    Share built-in-ethernet connection via Airport.
    Would this work properly
    with a Windows XP computer with a wireless card in?
    Yes, but you won't be able to use a password with an XP PC therefore is not recommended.
    I would recommend getting a wireless router.
    iFelix

Maybe you are looking for

  • Training and Event Management

    Can anyone guide me as how to create Training Events in bulk through SAP? I am getting stuck in all ways.. I am not sure where exactly FIRMLY BOOKED flag is stored coz of which we are not able to develop any programs.. Please guide me if ther is any

  • Using null to replace values

    I'm a newbie! Can you tell me how can replace existing values in a variable. My plot in the program is to have the price of products in my right hand then transfer that to the cart and then to cashier lady. I have to make sure and know that when I tr

  • How to disable the sub-quote in a web

    in the latest firefox 33.0,sub-quote often automaticlly display to disturb normal surfing.how to disable this option? thank guys.

  • Agent Install without SSH

    Hi all, I need to install agent but this machine don´t have ssh. Just telnet! I always use the Agent Installation by web(Grid Control). How can i install this without having ssh configured?? Tks, Paulo.

  • Unable to view Citadel data, even though it is there.

    I cannot view the traces with any method other that exporting them.  Historical and Real-time trends give an error:  Error 1.  Invalid Data Type to Trend.  The traces don't graph in MAX, but I don't get an error.  I recently upgraded to version 8.2.1