Sharing .itl file between Mac and Windows

How do I share an .itl file located on a NAS between a Windows machine and a Mac? I can do it with two Windows machines, but one I add a Mac, every time I switch platforms the library rebuilds. Onle one machine is accessing the itl file at a time, all the content is on the NAS, and I have 11.0.2.25 on the Mac and 11.0.2.26 on the Windows machine (can't get 11.0.2.25 on the Windows machine.

Right now, I have Verizon DSL that uses a Westell router. It has 4 ethernet ports on the back in addition to the DSL connections. I have a HP Pavilion with Windows XP in the basement, an iMac G3 in my room, and an intel iMac in our living room all connected to the router by ethernet cables. Each computer is able to access the other computer's files. On the intel iMac I have Microsoft Remote Desktop installed so that I can log into the HP in the basement and control it from the iMac. I haven't tried operating this network wirelessly, but I would imagine that it would be possible. One thing that you might want to check is the router's configuration. My router has settings that either allow or block wireless signals. To access my router's settings I type in 192.168.1.1 in Safari or Internet Explorer. Having all 3 computers on the internet at the same time does not slow the speed of the DSL very much.
I hope this information will help.
20" iMac Intel Core 2 Duo 2.16 GHz Mac OS X (10.4.8) 250GB HD, 128 MB X1600 Graphics, 1 GB DDR2, DVD+-RW

Similar Messages

Share files between Mac and Windows in same iMac with boot camp

Hello,
I am new in using Mac and recently I buy a IMac 24" model.
I used to use PC a long time with a lot of old document.
I want to install Windows XP with boot camp.
But I also want to share my documents, music, video files between Mac and Windows in same iMac.
How can I do this?
Thanks in advance,
Eric

Hi Eric and welcome to Discussions and the Apple world.
Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
However with FAT32 you are limited to a partition size of 32GB.
Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
Regards
Stefan

Sharing linked files between mac and pc

Dear Community and AI Support,
My team is trying to share AI files between Macs and PCs. That works fine until we have Linked assets. Once we have linked assets, AI either forgets to, or is unable to, let us relink more than one of the linked files. We can't edit the links or even delete them. The linked files are just ignored, leaving the file half empty.
We've tried hacking the paths directly in the .AI file, hoping to eventually write a perl script to help us switch back and forth. but no luck. We assume there is a checksum or crc code or hash, etc..., as AI won't even try to open the file after that.
But to clarify the issue. here is an example of the Mac and PC links we need to switch between using an excerpt from the AI file. These are valid, working directories on both platforms.
Mac flavor:
               <rdf:li rdf:parseType="Resource">
                  <stMfs:linkForm>EmbedByReference</stMfs:linkForm>
                  <stMfs:reference rdf:parseType="Resource">
                     <stRef:filePath>/T/source/stories/00002/characters/puppy.ai</stRef:filePath>
                     <stRef:documentID>xmp.did:5bbaeed4-f8e3-f54b-b302-0b9d14f5a0eb</stRef:documentID>
                     <stRef:instanceID>uuid:1f66816c-99cb-4d62-ab88-aa6f9c92adad</stRef:instanceID>
                  </stMfs:reference>
               </rdf:li>
Win flavor:
               <rdf:li rdf:parseType="Resource">
                  <stMfs:linkForm>EmbedByReference</stMfs:linkForm>
                  <stMfs:reference rdf:parseType="Resource">
                     <stRef:filePath>T:\source\stories\00002\characters\puppy.ai</stRef:filePath>
                     <stRef:documentID>xmp.did:5bbaeed4-f8e3-f54b-b302-0b9d14f5a0eb</stRef:documentID>
                     <stRef:instanceID>uuid:1f66816c-99cb-4d62-ab88-aa6f9c92adad</stRef:instanceID>
                  </stMfs:reference>
               </rdf:li>
Thanks! :]
Chris

ooohhhhh very interesting. I did a find and replace on all the strings, but no dice. I didn't think to look at those types of data. But now that you have mentioned it, perhaps I'll do a diff on the same file saved on both platforms to see what has been changed. Should have already thought of it, but your note has made me check my assumptions.

Sharing files between mac and windows

Hello, I have recently purchased a new mac computer and I would like to transfer files from my old windows computer onto this new one and vice versa. I have tried using an external hard drive to do this, but I found that it can only be formatted to one OS at one time. Does anybody have any ideas of how I can accomplish this? Thank you so much for your help everyone!

I'm not clear as to the current format of the drive. Since you say it is working with MacDrive I am assuming it is currently NTFS. You also say this is for a "new computer" so is this really a Leopard OS computer, making this a Leopard OS question? There's differences in the capabilities of the different systems.
As for MacDrive, if it works and it's the only program then you'll have to pay for it. I'd say if you're just using it this once for this one application you could probably buy a used drive for $50 to allow you to clear some files off the one you want to use and reformat it. Drives formatted to FAT32 can hold files up to 4GB in size and work with both Mac and Windows. Unless this is for video I don't see a severe restriction to reformatting to FAT32 and using that.

Share files between Mac and Windows sessions.

Hello,
I've a business(sales) software(Ciel) which is working on Mac. This software is generating a file which can be exported to another (Ciel) software(accounting) but which only works on Windows. I've made 2 sessions for both operating systems, split hard disk in 2 partitions and installed the both software separately.
How can I let the windows partition being accessible to writing mode from mac session in order to export the file from mac to windows?
Thank's in advance.

You may want to investigate Parallels for Mac. It will allow you to share everything in your Mac with Windows.
http://www.parallelsstore.com/parallels-desktop-for-mac.html

Sharing Files between Mac and Windows XP PC

I have an small office with three computers. There is a new Mac that basically acts as the server. There is a shared folder on the computer. The other 2 computers are PCs. All permissions have been set on the Mac. The other 2 users are set as Administrators on the Mac and have the ability to Read and Write. The other 2 users can access the files, but they are not able to make any changes. The shared folder has may sub folders. Any ideas?

huh, i used migration assistant to create a user with all my old data. now i have 2 users. anyway, i was putting the old data i wanted (i plan to wipe out the old user) into the shared folder...and it was working fine. all of a sudden, i put files into the shared folder, and when i log in as the new user, i can't use the file. won't give me access.
i've enabled file sharing, the files and folders are marked as shared, and well...it seems like file sharing is broken.
...ideas?

Sharing Internet Connection between Mac and Windows

Hi there!
I have a Windows Desktop and a Macbook 13". Am I able to share the Internet between them?
My Mac has Airport to connect wirelessly. So does my PC, except this Wireless connection always fails. I have re-installed the software and so on, but it still is failing.
What I would like to do is to have my PC connect to my Mac (preferably wirelessly, but I will use an Ethernet cable if I have to!) and then use the Wireless Internet connection. Is this possible, or am I just dreaming?
Help with this would be greatly appreciated!
James
Macbook 13" Intel Core 2 Duo Mac OS X (10.4.8) 2.0 Ghz and a Superdrive!

Right now, I have Verizon DSL that uses a Westell router. It has 4 ethernet ports on the back in addition to the DSL connections. I have a HP Pavilion with Windows XP in the basement, an iMac G3 in my room, and an intel iMac in our living room all connected to the router by ethernet cables. Each computer is able to access the other computer's files. On the intel iMac I have Microsoft Remote Desktop installed so that I can log into the HP in the basement and control it from the iMac. I haven't tried operating this network wirelessly, but I would imagine that it would be possible. One thing that you might want to check is the router's configuration. My router has settings that either allow or block wireless signals. To access my router's settings I type in 192.168.1.1 in Safari or Internet Explorer. Having all 3 computers on the internet at the same time does not slow the speed of the DSL very much.
I hope this information will help.
20" iMac Intel Core 2 Duo 2.16 GHz Mac OS X (10.4.8) 250GB HD, 128 MB X1600 Graphics, 1 GB DDR2, DVD+-RW

Useing file between mac and windows

I am new to Flash. My question is this, if I make
presentation in Flash on a Mac, can I save the file and then use
the same file on a Windows laptop for a presentation? I have Flash
on my laptop (Windows) but my boss is having me make the
presentations on the company Mac.
Thank you

Thank you. I did not know that there was soooo much to learn,
even though "they" say it is simple to use.

Moving photo files between Mac and Windows

When I upload photos from my camera to my MacBook Pro, and then try to copy some to a Windows PC, I can't access them on the PC.
Is there a solution to this please?
Thanks!

Hi Eric and welcome to Discussions and the Apple world.
Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
However with FAT32 you are limited to a partition size of 32GB.
Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
Regards
Stefan

Hidden files between Mac and Windows

I am evaluating Oracle Content Services to replace a traditional (OS X Server with AFP and SMB) file server. I'm doing some tests and I see that when I upload or change files by WebDAV, files starting with '.' appears. Let say I uploaded a file called 'test.doc', after the upload is complete, a file called '.test.doc' is also created. I guess that they are files created by the Finder on OS X to contains the resource fork, but the problem is that I see those files when I mount the same folder on a XP station.
Is there a setting somewhere to not display files that start with dots ?

I haven't seen a filter setting on the WinXP side, but I have seen a setting on the MacOSX side that prevents the OS from creating the "." files on network volumes. If you try to browse an area with read-only permissions, MacOSX will give out lots of warnings on creating those . files.
and here's a link to a website that talks about the setting http://www.macosxhints.com/article.php?story=2005070300463515.
I've tried this out and it does work.
Out of curiosity, have you gotten this to work with Intel based Macs?

File transfer between Mac and Windows

I am running Windows on my Mac and I transfer files between mac and Windows alot using my external hard drive. I was wondering if there was an easier way to do this than having to use my external hard drive like a networking solution or something. Thanks...

i also run windows on my mac (for work). The issue i had was that when booted in osx, i could see the windows partition, and copy files FROM it to the mac side, but i could not copy files TO the windows partition.
As i understand it, this is because the apple NTFS driver (to read the windows partition) only allows read access (not read and write access). It was easily solved with MacFuse (which is an open source way to add different disk file systems to your mac, kind of like teaching it a new language), and NTFS-3G for mac osx.
http://macntfs-3g.blogspot.com/
scroll down a bit for the download link. The installer will put in MacFuse and NTFS-3G, so it's the only one you need.
After a reboot, i can read/write to the windows partition while booted into macosx (and it's free).
i hope that helps.
p.s. the efi boot manager download is NOT required.

Syncing between mac and windows

I have an issue where I have created files in Adobe Draw (and previously in Ideas) which I have then saved to the Creative Cloud. I open these files in Illustrator on my Mac, save them back to the cloud then open them on a Windows PC. When I save these files on the PC, I get the Unable to Sync Files error message. I have gone through these solutions Error: "Unable to sync files" but no solution applies. If I create a file on my PC, it syncs fine. Is there a known issue when sharing files between Mac and Windows? I can save the files to Dropbox or email them and I don't have this issue. Thanks

Hello,
Would you be able to send me your log files so I can better see what might be causing this issue issue. I will need Logs from both your Mac and Windows machines please.
You can find your log files at...
Mac:
/Users/<username>/Library/Application Support/Adobe/CoreSync
Windows:
C:\Users\<username>\AppData\Roaming\Adobe\CoreSync
'Library' on Mac and 'AppData' on Windows are both hidden folders. Please read these pages for help on showing these folders:
http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-extensions.html (Win)
https://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html (Mac)
please upload them to Creative Cloud and send me a link to the logs at [email protected]
Thanks
Warner

Help: symbol shifting between mac and windows, flash cs3

I'm doing work reviewing flash files created by other users
on mac and windows. I'm using os x 10.5.6. When I open a file
created in windows / flash cs3 some symbols on the stage will have
shifted upwards on the y axis. If I correct the shift and then send
it back to the windows user they see the symbols incorrectly
aligned, as if I had moved symbols around on a correctly aligned
file.
The strange thing is not everything on the stage is shifted.
Only particular symbols will move, and it's usually symbols only
(not text frames, drawing objects, etc).
I believe there's a general history of bad behavior when
saving flash files and trading them back and forth between mac and
windows, but does anyone know what may be causing this? Or a
remedy?
Thank you in advance.
Peter

also, I tried opening the same files in vista using a mac
mini with vista installed on a bootcamp partition. When opening
other windows authored flash files there I had shifting issues as
well, so I'm not convinced it's strictly a mac vs. windows issue.
Unless it's a flash cs3 on windows xp doesn't like mac flash cs3
and vista flash cs3...

Transferring keyboard shortcuts between Mac and Windows

I need to migrate users from Mac (CS 5.5) to Windows 7 (CS 6). I have tried to transfer a user's custom keyboard shortcut set by copying the .indk file to the appropriate folder on the PC, and although it shows up in the list, when I try to select the set I get an error saying it is in the wrong format or the file could be damaged. Is there a way of transferring keyboard shortcuts between Mac and Windows?

Shortcut sets seem to be human-readable text files, so you could try making a copy and doing some editing, changing cmd to ctrl and opt to alt, and change the platform value in the first line to "win" though I can't make any promise it will work.
There are also some known problems trying to migrate legacy sets into newer versions of ID since CS5, I think.

My home sharing continually fails between mac and apple tv 2.

my home sharing continually fails between mac and apple tv 2, even during watching a movie. I go to the mac to re-turn on home sharing but it is still on. Any tips? I also have to turn off and back on at the mac every time i switch on my apple tv.

Sharing Stopped working again over night.
I went to Apple Support Artical TS2972
As soon as I did this Home Sharing started working
http://support.apple.com/kb/TS2972
Firewall Section
5. Check Firewall Settings
If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
Block all incoming connections
Allow only essential services
If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
It made sense to me, but its still puzzling me after restarting a router would (in my first attempt) resolve the issue for a day. This this time I applied the port forwarding TCP and UDP ports and saved the settings in the DLink DIR-655 and both my iPad2 and iPhone 3GS were now again finding the share. My ATV2 is also now accepting the Share.
Tommorrow will be the true test.

Sharing .itl file between Mac and Windows

Similar Messages

Maybe you are looking for