Sharing iTunes between wired and wireless Macs

Hi,
I have a Mac laptop connected wirelessly to an Airport Express -- which is wired to a desktop Mac Mini. I'm trying to share music but cannot. I've done all the proper settings in the iTunes preferences and the same in System Preferences -- I think -- on both computers, but on neither computer is anything showing in the Sources window. It says that there are no users online.
Is there something in the System Preferences box that I'm missing? Should I turn the firewall off (I shouldn't need to, since I've checked the iTunes Sharing box)? Is the main problem here that you can't share music between a wired and wireless computer? (This would be a bit strange to me, but you never know.)
One other thing. I was trying out the network and I can only get access to the wired Mini's Public folder as a Guest, not as a Registered User. Is there something very badly wrong here?
Any suggestions welcome. Thanks.

Thanks for the rapid response. All of those preferences, however, are already set properly (i.e., as you said) on both computers. When I try to go to the Network, I can access the wired desktop Mini's hard drive, but when I try to do it on the mini to get into the laptop's it can't find the afp. It just keeps searching but then says it doesn't exist. Not sure if this network-connectivity problem is relevant or not for this particular issue of iTunes sharing. Grateful for any advice.

Similar Messages

  • NetworkManager - switching between wired and wireless

    Hello!
    I’ve set up a new laptop with Arch and now have a question concerning NetworkManager. Is it possible in NM to switch between wired and wireless connections like it is with Connman (https://wiki.archlinux.org/index.php/Co … d_wireless)?
    So far it appears that NM only disables the wired connection when wireless is used but keeps the wireless alive when switching to wired.
    I have already looked for a corresponding configuration but couldn’t find anything that helps.
    Thanks in advance.

    Easy Mode:
    You can install the tlp-rdw package and edit the /etc/default/tlp configuration file which has an option that does that.
    Hard Mode:
    If you don't want to install a package and its dependencies, you can write your own script and put it in /etc/NetworkManager/dispatcher.d and have the NetworkManager dispatcher hook run the script (which is actually what tlp-rdw does but you don't have to install the tlp package as a dependency)
    Note: tlp is a power manager and if you have any other power managers installed it might conflict with them so be wary of that.
    Here is the wiki page on tlp https://wiki.archlinux.org/index.php/Tlp
    Last edited by fungle (2014-08-05 23:05:00)

  • Can i use home sharing while mixing wired and wireless connections?

    I have an HP Pavilion desktop connected to my wireless router with an Ethernet cable.  My AppleTV is connected wirelessly to the 5GHz band on my simultaneous dual-band wireless-N router.  How do I share photos and music from the HP desktop to the AppleTV using Home Sharing?

    mikefilmguy wrote:
    I have a similar problem.
    I have 2 computers (and other ethernet addressable devices (printer etc) upstairs connected into a gigabit switch (d-link DG-2205) - computer A is an old 2002 G4 without wifi, computer B is a 2010 Mac mini wired into the switch. Downstairs, I have Computer C - a 2012 Mac mini connected to the fios router via wifi and there is a 1080p Apple TV connected via wifi.
    Computer A (Wired switch Connection) can only see computer B's (Wired switch Connection) music library.
    Computer B (Wired switch Connection) can see both computer A's and computer C's (Wireless router connection) Music library.
    Computer C (Wireless router connection)) can see computer B's (Wired switch Connection) music library.
    Apple TV can see computer B and C.
    The problem is that computer A Is the music computer That I want to stream throughout.
    If computer A and B can see each other, and computer C and AppleTV can see computer B, then why can't everyone see computer A ?
    Any response appreciated.
    What version of iTunes is the Computer A running - it may not support Home Sharing.

  • DPC3825 Blocks communication between wired and wireless

    I currently have six devices connected to this cable modem/router over wireless and two devices connected through wired ethernet connections. I can ping the wireless devices from the wired device without issue, but services such as Apple's file sharing, AirPlay, etc. are blocked - the AppleTV can't see the Mac Mini unless they're both wired or both wireless.
    I have no MAC filtering enabled. I use WPA security with a pre-shared key. CTS protection mode is disabled. WMM is enabled, "No ACK" is disabled.
    SPI Firewall protection is disabled. Block anonymous internet requests is checked. There is no IP filtering, no parental controls, no time of day rules, etc. I have no port filtering, forwarding, or triggering. DMZ is disabled. UPnP is disabled.
    I'm using firmware version
    DPC3825-v302r12901-100914a
    I'm hoping there's something simple that I'm missing here. Any thoughts?

    Hi Mikael
    Thank you for your question.  However, this community is for Cisco Small  Business Products which the DPC3825 is not.
    We  did some research for you and  found out that this is an internet  service provider (ISP) supported  product.  In otherwords you need to  contact your ISP or technology  reseller that you purchased this from to  help you with your question.
    Regards,
    Cindy  Toy
    Cisco Small Business  Community Manager
    for Cisco Small  Business Products
    www.cisco.com/go/smallbizsupport

  • Autoselection for a switch between wired and wireless network

    Hello,
    We currently have a VTC codec installed on a mobile cart that can connect via wireless or wired network.  The cart has the Linksys WET610N Dual-Band Wireless-N gaming and video adapter bridge.  If you want to go wireless you will have to unplug the CAT5 that goes into the walljack and plug in the cable from the bridge into the codec. 
    We need a 3-5 port switch. Port 1 will connect to the wireless bridge.  Port 2 would be available to connect to a wall jack.  Port 3 will connect to the codec.
    We need the ability for the switch to autoselect port 1 and 2.  If Port 2 is not connected (no link light), then Port 1 will be active.  If Port 2 is active, Port 1 will be inactive. 
    I need to know how to configure the bridge and a network switch if this is scenerio is possible.  Any help is appreciated.
    Thanks,
    Aaron

    Well, I thought i had tried this before, but I followed another board's suggestion of turning of IGMP proxy and it is now working. I can see my iTunes server which is wired on my wireless devices.

  • Bridge between wired and wireless

    This is what I am hoping to accomplish
    router *****wireless connection 802.11******wlan0 - laptop - eth0 --------Wired ethernet---------------- another host(s)
    routers IP is 192.168.1.1
    The "other host(s)" need to be able to pull information via dhcp from the router.
    What I've tried so far
    I've installed bridge-utils and enabled ip forwarding in /proc
    brctl addbr br0
    brctl addif br0 wlan0
    brctl addif br0 eth0
    This is where I get lost. I think I need to manually configure wlan0 and eth0. In Ubuntu I think I remember setting br0 to bridge_ports in /etc/network.d/interfaces but I am not sure how to do this in Arch.
    Any suggestions?
    Thanks
    band-aid
    Ok I think I have been going about this all wrong, is it possible to do what I need to do using iptables masquerading?
    Last edited by band-aid (2008-07-21 07:20:33)

    You can use bridging OR ip masquerading - you don't need both. If you use bridging, wlan0 and eth0 join the bridge, which then gets its own virtual interface br0. This is the interface that gets an IP address, so that the laptop can continue to function normally. In this scenario, everything is on  single subnet, and no ip forwarding or routing manipulation is required.
    If you use IP masquerading, you're basically setting up NAT (Network Address Translation). The router and wlan0 are on one subnet, eth0 and the other hosts(s) are on another, and the laptop functions as the router between the two - as well as doing its normal laptop-y things, of course.
    There are probably various pros and cons either way - one that occurs to me now is that the IP masquerade option will probably leave you with a double-NAT setup, because your existing router is most likely doing NAT already. This may or may not be a problem for you - depends really on the kind of network apps you will be running. Personally, I prefer bridging in this kind of situation, just because I find it simpler.

  • Sharing printer with wired and wireless computers

    I am sure there's a topic about this somewhere, but I can't seem to find a clear answer. I have a PowerMac G4 that does not have wireless capabilites. I have a PowerBook G4 that does, and an Airport Express that makes everything possible. Last night I went to hook my laser printer up to the Airport Express. Everything went smoothly, but now I cannot print from my PowerMac. Is there a way that I can set this all up so both computers can use the printer without having to buy an Airport card for the PowerMac?
    Right now the printer is connected to the Airport Express which is connected to my router. The PowerMac is also connected to the router.
    Sorry that I am so clueless about this. Networking baffles me.

    Go to Airport Admin and uncheck "Distribute IP Addresses." With both a router and an Airport Express, you have created two separate networks - turning off part of that brings it back to one. (You may need to restart the Macs)

  • WRT54G2 v1 - Substantial Speed Difference Between Wired and Wireless Connection

    Hi everyone,
    I have a WRT54G2 v.1 router connected to an RCN Cable Modem. My download transfer rate direct from the cable modem is 18 Mbps. Thankfully, I can get the same download rate when I plug my laptop into a wired ethernet connection from the router. However, the wireless connection only gets a download rate of 0.8Mbps. Also, my wireless card is pretty new (Intel 4965AGN) and has the latest driver (I can get far higher download rates at mobile hotspots, for instance). Here is what I've tried with the router:
     - I've upgraded the router firmware to the latest build (Version 1.0.04, 07/08/2009).
     - I've tried multiple channels on the network (1, 6, 11).
     - I use WPA Security.
     - Upon advice from the Linksys live chat support, I've changed the MTU settings to manual and set them to 1300.
     - They also recommended that I change the following settings: “RTS Threshold” – 2304 “Fragmentation Threshold” – 2304 “Beacon Interval” – 50
     -   And of course: I've got my own SSID. The router is 5 feet off the ground. There are no other wireless devices that would cause interference. The router is not near large metal objects, fish tanks, or any other physical obstruction.
    Is there anything else I can do? Thank you so much in advance for reading. I really appreciate it.

    Also, is there anything to the fact that only the download rate seems to change?
    Wired:
    Wireless:

  • Itunes not connecting via airplay on wired and wireless network

    I have some computers on the wired part of my network, and others on wireless. My appletv2 shows in itunes on ALL (both wired and wireless) computers that there exists an AppleTv airplay speaker, but only the computers on the same "side" of the network (wired, or wireless) can actually connect and use the appletv as an airplay device. I have Bell Fibe25 and they provide 2 devices to achieve wireless connectivity, the main VDSL unit that has 4 lan ports on the back, and a basic Cisco WAP610N that connects into one of the lan ports on the VDSL unit for the wireless part.
    My firewall is turned off as well.
    Can anyone shed some light on why this is happening? My MacPro does not have wireless, and it would not be practical to connect my AppleTV2 to Ethernet cable.
    Thanks in advance,
    S

    I have Windows 7 and the same resolution fixed my problem but you do it in a slightly different way:
    Open Control Panel.
    Network and Internet
    Network and Sharing Center
    On the left menu bar select "Change adapter Settings"
    Right Click on Network Adapter (Might be Wireless or Wired or change Both) select Properties
    Under "The connection uses the following items:" UNCHECK - Internet Protocol Version 6 (TCP/IPv6)
    Click OK
    Restart Itunes and refresh Connection!
    Thanks for your help Shane

  • Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

    Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

    Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly   Thanks anyway!

  • Sharing files between users and macs

    My husband and I share an iMac. I have a MBA for traveling and my husband a PC laptop (though he rarely uses for private stuff). We both have iPhones.
    We are looking for a way to:
    - Share our photos (we don't use iPhoto) and some files. We would like to have this in one shared folder, that we can access from both accounts in the iMac, the MBA and ideally (though not a must) the PC and iPhones. We would both need to have admin rights to edit documents, etc.
    - Have access to all the information in my account on the iMac from the MBA. Ideally, same thing for his and the PC.
    - Have access to all the data remotely when traveling.
    - Have all the data backed up locally (we already have a cloud backup, but we'd like to have a local backup too as it's easier and quicker to access)
    We have read a lot about configuration, NAS, time capsule... but we get more and more confused, as we are obviously no tech experts.
    Dropbox is not our preferred choice. We already have a cloud backup system. We'd rather have the files stored and accessed locally for everyday use.
    Using a NAS to store shared folders and backup the rest sounds good, but they either seem very complicated to set up, or they have mixed reviews in terms of stability, especially to access files remotely.
    Timecapsule seems easier and more straightforward, but I'm not sure it would solve the "sharing files between users and macs with admin rights"? It seems to be more focused on backing up the main drive and then providing access to the backed up files. (Though I might be completely mistaken!)
    We just can't manage to have one shared folder between both accounts in the iMac. We need to grant admin rights document by document. We don't manage to make it work automatically so we both have one folder to access with full rights for all the contents inside it. And this seems to me like something that should easily be done...?
    Any help, advice, proposals... would be greatly appreciated!!!

    Move any file you want to the other user to access to the Shared Folder. Anything you put in that folder is available to all users.
    The shared folder is here:
    Macintosh HD > Users > Shared

  • Can I have wired and wireless simultaneously - and connect via another Mac?

    Here's my problem: My eMac (Feb 2005 running Leopard 10.5.8) is great except that it drops the ethernet cable internet every 15 minutes or so. "Sleep and wake" and I'm back on the internet for another 10-20 minutes, but this is not a long-term solution.
    OK so I say that I will get a D-Link wireless USB adapter for the eMac (it has bluetooth, but not WiFi). Fine, except then the D-Link DIR-635 router that sends the WiFi signal is too far away and too weak. But I have another computer to which I can plug-in the Ethernet CABLE. Can I then connect the eMac via a wireless (airport) sharing? NOTE: At this time the ISP Modem goes to a DIR-635 router (a wired and wireless router) and the cable goes up 2 flights of stairs to the eMac. I'd plan to then plug-in the PBG4-12" to the cable instead of the eMac; and then connect the eMac via wireless sharing if that is possible. (The PBG4 does NOT drop the signal via wired ethernet - it is a problem with the eMac not the cable or router).
    BUT then how to print? My MP640 printer is set-up for wired printing only right now. And for a number of reasons, I really want to keep it on wired (not wireless)-- I use this with another computer etc. etc. and wired gives me more selections for printing...
    Any comments on this possibility and then I'll reply with comments and/or ideas-- THANKS!
    Best regards,
    Steve Schulte
    Thursday 3 February 2011

    If you use two routers then you should have the main one (connected to modem) as the official router. The second one should be configured to extend the existing network (you will need to consult its manual to find out how that's done.) If you try using two routers independently, then they will tend to interfere with each other because both are trying to deliver IP numbers on the network. So if the printer ends up on the secondary router then a machine connected to the main router may not be able to connect to the printer.

  • WRT54G2 keeps dropping connection, wired and wireless

    I have a Scientific Atlanta modem with WRT54G2 wireless router. Both are around 2 years old. In the past few months, I keep getting periodic connection drop, couple times a day, day on day off. I have 2 wired connections and 3 wireless connections to the router. I check with my internet provider, Cox, they say my connection is fine. So I guess it's the router or modem problem.
    The funny thing is when connection drop, I cannot access any web sites via wired and wireless. However, my downloads in iTune are still running fine at full speed. I have to unplug and replug both router and modem for it to work again.
    Is there a way to fix this? or do i need to buy a new router or modem?
    Solved!
    Go to Solution.

    It's possible that Cox only recognizes the router's MAC address, probably the reason why you can't connect directly.
    Anyway, try to lower the MTU settings on the router.

  • I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

    I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

    Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
    To perform the Factory Default Reset on the Time Capsule....
    Pull the power cord from the back of the device
    Wait a few moments
    Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
    Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
    On your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Continue
    Follow the guided setup and choose the "join" option when it appears duriing the setup
    You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

  • Wired and Wireless sometimes work (mostly not) after update.

    So I have an issue with my network connection.  It sometimes works, sometimes doesn't (mostly doesn't).  This is for both wired and wireless.  This started to happen a couple of days ago after an update.  I had not updated for about a month prior.  Prior to the update I used WICD and it worked just fine with no problems.  I have no exotic hardware (ipw2200 using its firmware, dell xps gen2 notebook) and I set up everything about 6 months ago based on all the wikis.  I have a dlink dir-825 router.  Both wired and wireless connections work in windows every boot so it's not hardware.
    I've included as much info as possible... sorry for the length.
    Things I've tried:
    Removing the ! from the INTERFACES=(!eth0 !eth1) in rc.conf
    Removing netfs from the daemons
    all the hostnames match in hosts and rc.conf
    Here is my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="local"
    USEDIRECTISA="no"
    TIMEZONE="America/New_York"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(acpi-cpufreq cpufreq_ondemand cpufreq_powersave cpufreq_conservative cpufreq_userspace fuse ipw2200)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="yes"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="stupendiousman"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    #   - prefix an entry in INTERFACES with a ! to disable it
    #   - no hyphens in your interface names - Bash doesn't like it
    # DHCP:     Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(!eth0 !eth1)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    #   - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up.  These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    #   - set to 'menu' to present a menu during boot-up (dialog package required)
    #   - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    #   - prefix a daemon with a ! to disable it
    #   - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng hal cpufreq wicd alsa crond fam bluetooth)
    Here is my hosts
    # /etc/hosts: static lookup table for host names
    #<ip-address>   <hostname.domain.org>   <hostname>
    127.0.0.1               localhost.localdomain   localhost stupendiousman
    # End of file
    Here is my mkinitcpio.conf
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run.  Advanced users may wish to specify all system modules
    # in this array.  For instance:
    #     MODULES="piix ide_disk reiserfs"
    MODULES=""
    CRYPTO_MODULES="aes_generic aes_i586 dm_crypt xts"
    # BINARIES
    # This setting includes, into the CPIO image, and additional
    # binaries a given user may wish.  This is run first, so may
    # be used to override the actual binaries used in a given hook.
    # (Existing files are NOT overwritten is already added)
    # BINARIES are dependancy parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in anyway.  This is useful for config files.
    # Some users may wish to include modprobe.conf for custom module options,
    # like so:
    #    FILES="/etc/modprobe.conf"
    FILES=""
    # HOOKS
    # This is the most important setting in this file.  The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'modload' may be used in place of 'udev', but is not recommended
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    #    This setup specifies all modules in the MODULES setting above.
    #    No raid, lvm2, or encrypted root is needed.
    #    HOOKS="base"
    #    This setup will autodetect all modules for your system and should
    #    work as a sane default
    #    HOOKS="base udev autodetect pata scsi sata filesystems"
    #    This is identical to the above, except the old ide subsystem is
    #    used for IDE devices instead of the new pata subsystem.
    #    HOOKS="base udev autodetect ide scsi sata filesystems"
    #    This setup will generate a 'full' image which supports most systems.
    #    No autodetection is done.
    #    HOOKS="base udev pata scsi sata usb filesystems"
    #    This setup assembles an pata raid array with an encrypted root FS.
    #    Note: See 'mkinitcpio -H raid' for more information on raid devices.
    #    HOOKS="base udev pata raid encrypt filesystems"
    #    This setup loads an lvm2 volume group on a usb device.
    #    HOOKS="base udev usb lvm2 filesystems"
    HOOKS="base udev autodetect pata scsi sata encrypt lvm2 resume filesystems firmware"
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
    00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation NV41.9 [GeForce Go 6800 Ultra] (rev a2)
    03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet (rev 03)
    03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
    03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
    03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
    03:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
    ifconfig returns:
    [rick@stupendiousman ~]$ ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:12:F0:3E:CA:66 
              inet6 addr: fe80::212:f0ff:fe3e:ca66/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:4454 (4.3 Kb)
              Interrupt:17 Base address:0x6000 Memory:dcfef000-dcfeffff
    eth1      Link encap:Ethernet  HWaddr 00:11:43:72:B5:96 
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
              Interrupt:18
    lo        Link encap:Local Loopback 
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:4 errors:0 dropped:0 overruns:0 frame:0
              TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:280 (280.0 b)  TX bytes:280 (280.0 b)
    If I do a iwlist scan I get:
    [rick@stupendiousman ~]$ iwlist scan
    lo        Interface doesn't support scanning.
    eth0      No scan results
    eth1      Interface doesn't support scanning.
    pan0      Interface doesn't support scanning.
    Here is a portion of my /var/log/wicd/wicd.log
    2009/08/15 09:19:29 :: ---------------------------
    2009/08/15 09:19:29 :: wicd initializing...
    2009/08/15 09:19:29 :: ---------------------------
    2009/08/15 09:19:29 :: wicd is version 1.6.2 436
    2009/08/15 09:19:29 :: setting backend to external
    2009/08/15 09:19:29 :: trying to load backend external
    2009/08/15 09:19:30 :: successfully loaded backend external
    2009/08/15 09:19:30 :: trying to load backend external
    2009/08/15 09:19:30 :: successfully loaded backend external
    2009/08/15 09:19:30 :: Automatically detected wireless interface eth0
    2009/08/15 09:19:30 :: setting wireless interface eth1
    2009/08/15 09:19:30 :: automatically detected wired interface eth1
    2009/08/15 09:19:30 :: setting wired interface eth0
    2009/08/15 09:19:30 :: setting wpa driver wext
    2009/08/15 09:19:30 :: setting use global dns to False
    2009/08/15 09:19:30 :: setting global dns
    2009/08/15 09:19:30 :: global dns servers are None None None
    2009/08/15 09:19:30 :: domain is None
    2009/08/15 09:19:30 :: search domain is None
    2009/08/15 09:19:30 :: setting automatically reconnect when connection drops True
    2009/08/15 09:19:30 :: Setting dhcp client to 0
    2009/08/15 09:19:30 :: Wireless configuration file found...
    2009/08/15 09:19:30 :: Wired configuration file found...
    2009/08/15 09:19:30 :: chmoding configuration files 0600...
    2009/08/15 09:19:30 :: chowning configuration files root:root...
    2009/08/15 09:19:30 :: Using wireless interface...eth1
    2009/08/15 09:19:30 :: Using wired interface...eth0
    2009/08/15 09:19:36 :: Autoconnecting...
    2009/08/15 09:19:39 :: Attempting to autoconnect with wired interface...
    2009/08/15 09:19:39 :: Putting interface down
    2009/08/15 09:19:39 :: Releasing DHCP leases...
    2009/08/15 09:19:39 :: Setting false IP...
    2009/08/15 09:19:39 :: Flushing the routing table...
    2009/08/15 09:19:39 :: Putting interface up...
    2009/08/15 09:19:39 :: Running DHCP
    2009/08/15 09:19:39 :: dhcpcd: version 5.0.6 starting
    2009/08/15 09:19:39 ::
    2009/08/15 09:19:39 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 09:19:39 ::
    2009/08/15 09:20:09 :: dhcpcd: timed out
    2009/08/15 09:20:09 ::
    2009/08/15 09:20:09 :: DHCP connection failed
    2009/08/15 09:20:09 :: exiting connection thread
    2009/08/15 09:20:11 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 09:20:11 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 09:20:11 :: Sending connection attempt result dhcp_failed
    2009/08/15 09:21:03 :: trying to load backend ioctl
    2009/08/15 09:21:03 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
    2009/08/15 09:21:03 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
    2009/08/15 09:21:03 :: trying to load backend external
    2009/08/15 09:21:10 :: Putting interface down
    2009/08/15 09:21:10 :: Releasing DHCP leases...
    2009/08/15 09:21:10 :: Setting false IP...
    2009/08/15 09:21:10 :: Flushing the routing table...
    2009/08/15 09:21:10 :: Putting interface up...
    2009/08/15 09:21:10 :: Running DHCP
    2009/08/15 09:21:10 :: dhcpcd: version 5.0.6 starting
    2009/08/15 09:21:10 ::
    2009/08/15 09:21:10 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 09:21:10 ::
    2009/08/15 09:21:40 :: dhcpcd: timed out
    2009/08/15 09:21:40 ::
    2009/08/15 09:21:40 :: DHCP connection failed
    2009/08/15 09:21:40 :: exiting connection thread
    2009/08/15 09:21:40 :: Sending connection attempt result dhcp_failed
    2009/08/15 09:22:28 :: Putting interface down
    2009/08/15 09:22:28 :: Releasing DHCP leases...
    2009/08/15 09:22:28 :: Setting false IP...
    2009/08/15 09:22:28 :: Flushing the routing table...
    2009/08/15 09:22:28 :: Putting interface up...
    2009/08/15 09:22:28 :: Running DHCP
    2009/08/15 09:22:28 :: dhcpcd: version 5.0.6 starting
    2009/08/15 09:22:28 ::
    2009/08/15 09:22:28 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 09:22:28 ::
    2009/08/15 09:22:58 :: dhcpcd: timed out
    2009/08/15 09:22:58 ::
    2009/08/15 09:22:58 :: DHCP connection failed
    2009/08/15 09:22:58 :: exiting connection thread
    2009/08/15 09:22:58 :: Sending connection attempt result dhcp_failed
    2009/08/15 09:23:17 :: Daemon going down, killing wicd-monitor...
    2009/08/15 09:23:17 :: Removing PID file...
    2009/08/15 09:23:17 :: Shutting down...
    2009/08/15 13:16:59 :: ---------------------------
    2009/08/15 13:16:59 :: wicd initializing...
    2009/08/15 13:16:59 :: ---------------------------
    2009/08/15 13:16:59 :: wicd is version 1.6.2 436
    2009/08/15 13:16:59 :: setting backend to external
    2009/08/15 13:16:59 :: trying to load backend external
    2009/08/15 13:17:00 :: successfully loaded backend external
    2009/08/15 13:17:00 :: trying to load backend external
    2009/08/15 13:17:00 :: successfully loaded backend external
    2009/08/15 13:17:00 :: Automatically detected wireless interface eth0
    2009/08/15 13:17:00 :: setting wireless interface eth1
    2009/08/15 13:17:00 :: automatically detected wired interface eth1
    2009/08/15 13:17:00 :: setting wired interface eth0
    2009/08/15 13:17:00 :: setting wpa driver wext
    2009/08/15 13:17:00 :: setting use global dns to False
    2009/08/15 13:17:00 :: setting global dns
    2009/08/15 13:17:00 :: global dns servers are None None None
    2009/08/15 13:17:00 :: domain is None
    2009/08/15 13:17:00 :: search domain is None
    2009/08/15 13:17:00 :: setting automatically reconnect when connection drops True
    2009/08/15 13:17:00 :: Setting dhcp client to 0
    2009/08/15 13:17:00 :: Wireless configuration file found...
    2009/08/15 13:17:00 :: Wired configuration file found...
    2009/08/15 13:17:00 :: chmoding configuration files 0600...
    2009/08/15 13:17:00 :: chowning configuration files root:root...
    2009/08/15 13:17:00 :: Using wireless interface...eth1
    2009/08/15 13:17:00 :: Using wired interface...eth0
    2009/08/15 13:17:06 :: Autoconnecting...
    2009/08/15 13:17:09 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:17:09 :: Putting interface down
    2009/08/15 13:17:09 :: Releasing DHCP leases...
    2009/08/15 13:17:09 :: Setting false IP...
    2009/08/15 13:17:09 :: Flushing the routing table...
    2009/08/15 13:17:09 :: Putting interface up...
    2009/08/15 13:17:09 :: Running DHCP
    2009/08/15 13:17:09 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:17:09 ::
    2009/08/15 13:17:09 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:17:09 ::
    2009/08/15 13:17:39 :: dhcpcd: timed out
    2009/08/15 13:17:39 ::
    2009/08/15 13:17:39 :: DHCP connection failed
    2009/08/15 13:17:39 :: exiting connection thread
    2009/08/15 13:17:41 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:17:41 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:17:41 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:18:10 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:18:10 :: Removing PID file...
    2009/08/15 13:18:10 :: Shutting down...
    2009/08/15 13:19:01 :: ---------------------------
    2009/08/15 13:19:01 :: wicd initializing...
    2009/08/15 13:19:01 :: ---------------------------
    2009/08/15 13:19:01 :: wicd is version 1.6.2 436
    2009/08/15 13:19:01 :: setting backend to external
    2009/08/15 13:19:01 :: trying to load backend external
    2009/08/15 13:19:02 :: successfully loaded backend external
    2009/08/15 13:19:02 :: trying to load backend external
    2009/08/15 13:19:02 :: successfully loaded backend external
    2009/08/15 13:19:02 :: Automatically detected wireless interface eth0
    2009/08/15 13:19:02 :: setting wireless interface eth1
    2009/08/15 13:19:02 :: automatically detected wired interface eth1
    2009/08/15 13:19:02 :: setting wired interface eth0
    2009/08/15 13:19:02 :: setting wpa driver wext
    2009/08/15 13:19:02 :: setting use global dns to False
    2009/08/15 13:19:02 :: setting global dns
    2009/08/15 13:19:02 :: global dns servers are None None None
    2009/08/15 13:19:02 :: domain is None
    2009/08/15 13:19:02 :: search domain is None
    2009/08/15 13:19:02 :: setting automatically reconnect when connection drops True
    2009/08/15 13:19:02 :: Setting dhcp client to 0
    2009/08/15 13:19:02 :: Wireless configuration file found...
    2009/08/15 13:19:02 :: Wired configuration file found...
    2009/08/15 13:19:02 :: chmoding configuration files 0600...
    2009/08/15 13:19:02 :: chowning configuration files root:root...
    2009/08/15 13:19:02 :: Using wireless interface...eth1
    2009/08/15 13:19:02 :: Using wired interface...eth0
    2009/08/15 13:19:08 :: Autoconnecting...
    2009/08/15 13:19:11 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:19:11 :: Putting interface down
    2009/08/15 13:19:11 :: Releasing DHCP leases...
    2009/08/15 13:19:11 :: Setting false IP...
    2009/08/15 13:19:11 :: Flushing the routing table...
    2009/08/15 13:19:11 :: Putting interface up...
    2009/08/15 13:19:11 :: Running DHCP
    2009/08/15 13:19:11 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:19:11 ::
    2009/08/15 13:19:11 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:19:11 ::
    2009/08/15 13:19:41 :: dhcpcd: timed out
    2009/08/15 13:19:41 ::
    2009/08/15 13:19:41 :: DHCP connection failed
    2009/08/15 13:19:41 :: exiting connection thread
    2009/08/15 13:19:43 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:19:43 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:19:43 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:30:36 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:30:36 :: Removing PID file...
    2009/08/15 13:30:36 :: Shutting down...
    2009/08/15 13:31:29 :: ---------------------------
    2009/08/15 13:31:29 :: wicd initializing...
    2009/08/15 13:31:29 :: ---------------------------
    2009/08/15 13:31:29 :: wicd is version 1.6.2 436
    2009/08/15 13:31:29 :: setting backend to external
    2009/08/15 13:31:29 :: trying to load backend external
    2009/08/15 13:31:30 :: successfully loaded backend external
    2009/08/15 13:31:30 :: trying to load backend external
    2009/08/15 13:31:30 :: successfully loaded backend external
    2009/08/15 13:31:30 :: Automatically detected wireless interface eth0
    2009/08/15 13:31:30 :: setting wireless interface eth1
    2009/08/15 13:31:30 :: automatically detected wired interface eth1
    2009/08/15 13:31:30 :: setting wired interface eth0
    2009/08/15 13:31:30 :: setting wpa driver wext
    2009/08/15 13:31:30 :: setting use global dns to False
    2009/08/15 13:31:30 :: setting global dns
    2009/08/15 13:31:30 :: global dns servers are None None None
    2009/08/15 13:31:30 :: domain is None
    2009/08/15 13:31:30 :: search domain is None
    2009/08/15 13:31:30 :: setting automatically reconnect when connection drops True
    2009/08/15 13:31:30 :: Setting dhcp client to 0
    2009/08/15 13:31:30 :: Wireless configuration file found...
    2009/08/15 13:31:30 :: Wired configuration file found...
    2009/08/15 13:31:30 :: chmoding configuration files 0600...
    2009/08/15 13:31:30 :: chowning configuration files root:root...
    2009/08/15 13:31:30 :: Using wireless interface...eth1
    2009/08/15 13:31:30 :: Using wired interface...eth0
    2009/08/15 13:31:37 :: Autoconnecting...
    2009/08/15 13:31:39 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:31:39 :: Putting interface down
    2009/08/15 13:31:39 :: Releasing DHCP leases...
    2009/08/15 13:31:39 :: Setting false IP...
    2009/08/15 13:31:39 :: Flushing the routing table...
    2009/08/15 13:31:39 :: Putting interface up...
    2009/08/15 13:31:39 :: Running DHCP
    2009/08/15 13:31:39 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:31:39 ::
    2009/08/15 13:31:40 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:31:40 ::
    2009/08/15 13:32:09 :: dhcpcd: timed out
    2009/08/15 13:32:09 ::
    2009/08/15 13:32:09 :: DHCP connection failed
    2009/08/15 13:32:09 :: exiting connection thread
    2009/08/15 13:32:12 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:32:12 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:32:12 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:38:00 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:38:00 :: Removing PID file...
    2009/08/15 13:38:00 :: Shutting down...
    2009/08/15 13:39:19 :: ---------------------------
    2009/08/15 13:39:19 :: wicd initializing...
    2009/08/15 13:39:19 :: ---------------------------
    2009/08/15 13:39:19 :: wicd is version 1.6.2 436
    2009/08/15 13:39:19 :: setting backend to external
    2009/08/15 13:39:19 :: trying to load backend external
    2009/08/15 13:39:20 :: successfully loaded backend external
    2009/08/15 13:39:20 :: trying to load backend external
    2009/08/15 13:39:20 :: successfully loaded backend external
    2009/08/15 13:39:20 :: Automatically detected wireless interface eth0
    2009/08/15 13:39:20 :: setting wireless interface eth1
    2009/08/15 13:39:20 :: automatically detected wired interface eth1
    2009/08/15 13:39:20 :: setting wired interface eth0
    2009/08/15 13:39:20 :: setting wpa driver wext
    2009/08/15 13:39:20 :: setting use global dns to False
    2009/08/15 13:39:20 :: setting global dns
    2009/08/15 13:39:20 :: global dns servers are None None None
    2009/08/15 13:39:20 :: domain is None
    2009/08/15 13:39:20 :: search domain is None
    2009/08/15 13:39:20 :: setting automatically reconnect when connection drops True
    2009/08/15 13:39:20 :: Setting dhcp client to 0
    2009/08/15 13:39:20 :: Wireless configuration file found...
    2009/08/15 13:39:20 :: Wired configuration file found...
    2009/08/15 13:39:20 :: chmoding configuration files 0600...
    2009/08/15 13:39:20 :: chowning configuration files root:root...
    2009/08/15 13:39:20 :: Using wireless interface...eth1
    2009/08/15 13:39:20 :: Using wired interface...eth0
    2009/08/15 13:39:27 :: Autoconnecting...
    2009/08/15 13:39:29 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:39:29 :: Putting interface down
    2009/08/15 13:39:29 :: Releasing DHCP leases...
    2009/08/15 13:39:29 :: Setting false IP...
    2009/08/15 13:39:29 :: Flushing the routing table...
    2009/08/15 13:39:29 :: Putting interface up...
    2009/08/15 13:39:29 :: Running DHCP
    2009/08/15 13:39:29 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:39:29 ::
    2009/08/15 13:39:30 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:39:30 ::
    2009/08/15 13:39:59 :: dhcpcd: timed out
    2009/08/15 13:39:59 ::
    2009/08/15 13:39:59 :: DHCP connection failed
    2009/08/15 13:39:59 :: exiting connection thread
    2009/08/15 13:40:02 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:40:02 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:40:02 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:45:10 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:45:10 :: Removing PID file...
    2009/08/15 13:45:10 :: Shutting down...
    2009/08/15 13:46:13 :: ---------------------------
    2009/08/15 13:46:13 :: wicd initializing...
    2009/08/15 13:46:13 :: ---------------------------
    2009/08/15 13:46:13 :: wicd is version 1.6.2 436
    2009/08/15 13:46:13 :: setting backend to external
    2009/08/15 13:46:13 :: trying to load backend external
    2009/08/15 13:46:14 :: successfully loaded backend external
    2009/08/15 13:46:14 :: trying to load backend external
    2009/08/15 13:46:14 :: successfully loaded backend external
    2009/08/15 13:46:14 :: Automatically detected wireless interface eth1
    2009/08/15 13:46:14 :: setting wireless interface eth1
    2009/08/15 13:46:14 :: automatically detected wired interface eth0
    2009/08/15 13:46:14 :: setting wired interface eth0
    2009/08/15 13:46:14 :: setting wpa driver wext
    2009/08/15 13:46:14 :: setting use global dns to False
    2009/08/15 13:46:14 :: setting global dns
    2009/08/15 13:46:14 :: global dns servers are None None None
    2009/08/15 13:46:14 :: domain is None
    2009/08/15 13:46:14 :: search domain is None
    2009/08/15 13:46:14 :: setting automatically reconnect when connection drops True
    2009/08/15 13:46:14 :: Setting dhcp client to 0
    2009/08/15 13:46:14 :: Wireless configuration file found...
    2009/08/15 13:46:14 :: Wired configuration file found...
    2009/08/15 13:46:14 :: chmoding configuration files 0600...
    2009/08/15 13:46:14 :: chowning configuration files root:root...
    2009/08/15 13:46:14 :: Using wireless interface...eth1
    2009/08/15 13:46:14 :: Using wired interface...eth0
    2009/08/15 13:46:20 :: Autoconnecting...
    2009/08/15 13:46:22 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:46:22 :: trying to automatically connect to...101
    2009/08/15 13:46:22 :: Connecting to wireless network 101
    2009/08/15 13:46:23 :: Putting interface down
    2009/08/15 13:46:23 :: Releasing DHCP leases...
    2009/08/15 13:46:23 :: Setting false IP...
    2009/08/15 13:46:23 :: Stopping wpa_supplicant
    2009/08/15 13:46:23 :: Flushing the routing table...
    2009/08/15 13:46:23 :: Putting interface up...
    2009/08/15 13:46:23 :: Generating psk...
    2009/08/15 13:46:23 :: Attempting to authenticate...
    2009/08/15 13:46:34 :: Running DHCP
    2009/08/15 13:46:34 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:46:34 ::
    2009/08/15 13:46:34 :: dhcpcd: eth1: broadcasting for a lease
    2009/08/15 13:46:34 ::
    2009/08/15 13:46:35 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:35 ::
    2009/08/15 13:46:35 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:35 ::
    2009/08/15 13:46:35 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:46:35 ::
    2009/08/15 13:46:38 :: dhcpcd: eth1: carrier lost
    2009/08/15 13:46:38 ::
    2009/08/15 13:46:40 :: dhcpcd: eth1: carrier acquired
    2009/08/15 13:46:40 ::
    2009/08/15 13:46:40 :: dhcpcd: eth1: broadcasting for a lease
    2009/08/15 13:46:40 ::
    2009/08/15 13:46:45 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:45 ::
    2009/08/15 13:46:45 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:45 ::
    2009/08/15 13:46:45 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:46:45 ::
    2009/08/15 13:46:51 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 13:46:51 ::
    2009/08/15 13:46:51 :: dhcpcd: forking to background
    2009/08/15 13:46:51 ::
    2009/08/15 13:46:51 ::
    2009/08/15 13:46:51 :: DHCP connection successful
    2009/08/15 13:46:51 :: Connecting thread exiting.
    2009/08/15 13:46:55 :: Sending connection attempt result Success
    2009/08/15 13:48:50 :: Putting interface down
    2009/08/15 13:48:50 :: Releasing DHCP leases...
    2009/08/15 13:48:50 :: Setting false IP...
    2009/08/15 13:48:51 :: Flushing the routing table...
    2009/08/15 13:48:51 :: Putting interface up...
    2009/08/15 13:48:51 :: Running DHCP
    2009/08/15 13:48:51 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:48:51 ::
    2009/08/15 13:48:51 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:48:51 ::
    2009/08/15 13:48:51 :: dhcpcd: eth0: carrier lost
    2009/08/15 13:48:51 ::
    2009/08/15 13:48:53 :: dhcpcd: eth0: carrier acquired
    2009/08/15 13:48:53 ::
    2009/08/15 13:48:53 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:48:53 ::
    2009/08/15 13:48:54 :: dhcpcd: eth0: offered 192.168.0.193 from 192.168.0.1
    2009/08/15 13:48:54 ::
    2009/08/15 13:48:54 :: dhcpcd: eth0: acknowledged 192.168.0.193 from 192.168.0.1
    2009/08/15 13:48:54 ::
    2009/08/15 13:48:54 :: dhcpcd: eth0: checking for 192.168.0.193
    2009/08/15 13:48:54 ::
    2009/08/15 13:49:00 :: dhcpcd: eth0: leased 192.168.0.193 for 86400 seconds
    2009/08/15 13:49:00 ::
    2009/08/15 13:49:00 :: dhcpcd: forking to background
    2009/08/15 13:49:00 ::
    2009/08/15 13:49:00 ::
    2009/08/15 13:49:00 :: DHCP connection successful
    2009/08/15 13:49:00 :: Connecting thread exiting.
    2009/08/15 13:49:00 :: Sending connection attempt result Success
    2009/08/15 13:53:46 :: Connecting to wireless network 102
    2009/08/15 13:53:47 :: Putting interface down
    2009/08/15 13:53:47 :: Releasing DHCP leases...
    2009/08/15 13:53:47 :: Setting false IP...
    2009/08/15 13:53:47 :: Stopping wpa_supplicant
    2009/08/15 13:53:47 :: Flushing the routing table...
    2009/08/15 13:53:47 :: Putting interface up...
    2009/08/15 13:53:47 :: Generating psk...
    2009/08/15 13:53:47 :: Attempting to authenticate...
    2009/08/15 13:54:03 :: Running DHCP
    2009/08/15 13:54:03 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:03 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:03 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:03 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:05 :: dhcpcd: eth1: carrier lost
    2009/08/15 13:54:05 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: carrier acquired
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:11 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 13:54:11 ::
    2009/08/15 13:54:11 :: dhcpcd: forking to background
    2009/08/15 13:54:11 ::
    2009/08/15 13:54:11 ::
    2009/08/15 13:54:11 :: DHCP connection successful
    2009/08/15 13:54:11 :: Connecting thread exiting.
    2009/08/15 13:54:11 :: Sending connection attempt result Success
    2009/08/15 13:55:03 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:55:03 :: Removing PID file...
    2009/08/15 13:55:03 :: Shutting down...
    2009/08/15 13:55:52 :: ---------------------------
    2009/08/15 13:55:52 :: wicd initializing...
    2009/08/15 13:55:52 :: ---------------------------
    2009/08/15 13:55:52 :: wicd is version 1.6.2 436
    2009/08/15 13:55:52 :: setting backend to external
    2009/08/15 13:55:52 :: trying to load backend external
    2009/08/15 13:55:53 :: successfully loaded backend external
    2009/08/15 13:55:53 :: trying to load backend external
    2009/08/15 13:55:53 :: successfully loaded backend external
    2009/08/15 13:55:53 :: Automatically detected wireless interface eth0
    2009/08/15 13:55:53 :: setting wireless interface eth1
    2009/08/15 13:55:53 :: automatically detected wired interface eth1
    2009/08/15 13:55:53 :: setting wired interface eth0
    2009/08/15 13:55:53 :: setting wpa driver wext
    2009/08/15 13:55:53 :: setting use global dns to False
    2009/08/15 13:55:53 :: setting global dns
    2009/08/15 13:55:53 :: global dns servers are None None None
    2009/08/15 13:55:53 :: domain is None
    2009/08/15 13:55:53 :: search domain is None
    2009/08/15 13:55:53 :: setting automatically reconnect when connection drops True
    2009/08/15 13:55:53 :: Setting dhcp client to 0
    2009/08/15 13:55:53 :: Wireless configuration file found...
    2009/08/15 13:55:53 :: Wired configuration file found...
    2009/08/15 13:55:53 :: chmoding configuration files 0600...
    2009/08/15 13:55:53 :: chowning configuration files root:root...
    2009/08/15 13:55:53 :: Using wireless interface...eth1
    2009/08/15 13:55:53 :: Using wired interface...eth0
    2009/08/15 13:55:59 :: Autoconnecting...
    2009/08/15 13:56:02 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:56:02 :: Putting interface down
    2009/08/15 13:56:02 :: Releasing DHCP leases...
    2009/08/15 13:56:02 :: Setting false IP...
    2009/08/15 13:56:02 :: Flushing the routing table...
    2009/08/15 13:56:02 :: Putting interface up...
    2009/08/15 13:56:02 :: Running DHCP
    2009/08/15 13:56:02 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:56:02 ::
    2009/08/15 13:56:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 13:56:02 ::
    2009/08/15 13:56:12 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:56:12 ::
    2009/08/15 13:56:32 :: dhcpcd: timed out
    2009/08/15 13:56:32 ::
    2009/08/15 13:56:32 :: DHCP connection failed
    2009/08/15 13:56:32 :: exiting connection thread
    2009/08/15 13:56:34 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:56:34 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:56:34 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:57:31 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:57:31 :: Removing PID file...
    2009/08/15 13:57:31 :: Shutting down...
    2009/08/15 13:57:32 :: ---------------------------
    2009/08/15 13:57:32 :: wicd initializing...
    2009/08/15 13:57:32 :: ---------------------------
    2009/08/15 13:57:32 :: wicd is version 1.6.2 436
    2009/08/15 13:57:32 :: setting backend to external
    2009/08/15 13:57:32 :: trying to load backend external
    2009/08/15 13:57:32 :: successfully loaded backend external
    2009/08/15 13:57:32 :: trying to load backend external
    2009/08/15 13:57:32 :: successfully loaded backend external
    2009/08/15 13:57:32 :: Automatically detected wireless interface eth0
    2009/08/15 13:57:32 :: setting wireless interface eth1
    2009/08/15 13:57:32 :: automatically detected wired interface eth1
    2009/08/15 13:57:32 :: setting wired interface eth0
    2009/08/15 13:57:32 :: setting wpa driver wext
    2009/08/15 13:57:32 :: setting use global dns to False
    2009/08/15 13:57:32 :: setting global dns
    2009/08/15 13:57:32 :: global dns servers are None None None
    2009/08/15 13:57:32 :: domain is None
    2009/08/15 13:57:32 :: search domain is None
    2009/08/15 13:57:32 :: setting automatically reconnect when connection drops True
    2009/08/15 13:57:32 :: Setting dhcp client to 0
    2009/08/15 13:57:32 :: Wireless configuration file found...
    2009/08/15 13:57:32 :: Wired configuration file found...
    2009/08/15 13:57:32 :: chmoding configuration files 0600...
    2009/08/15 13:57:32 :: chowning configuration files root:root...
    2009/08/15 13:57:32 :: Using wireless interface...eth1
    2009/08/15 13:57:32 :: Using wired interface...eth0
    2009/08/15 13:57:38 :: Autoconnecting...
    2009/08/15 13:57:38 :: Putting interface down
    2009/08/15 13:57:38 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:57:38 :: Releasing DHCP leases...
    2009/08/15 13:57:38 :: Setting false IP...
    2009/08/15 13:57:38 :: Flushing the routing table...
    2009/08/15 13:57:38 :: Putting interface up...
    2009/08/15 13:57:38 :: Running DHCP
    2009/08/15 13:57:38 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:57:38 ::
    2009/08/15 13:57:38 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 13:57:38 ::
    2009/08/15 13:57:48 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:57:48 ::
    2009/08/15 13:58:08 :: dhcpcd: timed out
    2009/08/15 13:58:08 ::
    2009/08/15 13:58:08 :: DHCP connection failed
    2009/08/15 13:58:08 :: exiting connection thread
    2009/08/15 13:58:08 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:58:10 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:58:10 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:58:46 :: Putting interface down
    2009/08/15 13:58:46 :: Releasing DHCP leases...
    2009/08/15 13:58:46 :: Setting false IP...
    2009/08/15 13:58:46 :: Flushing the routing table...
    2009/08/15 13:58:46 :: Putting interface up...
    2009/08/15 13:58:46 :: Running DHCP
    2009/08/15 13:58:46 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:58:46 ::
    2009/08/15 13:58:46 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 13:58:46 ::
    2009/08/15 13:58:56 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:58:56 ::
    2009/08/15 13:59:16 :: dhcpcd: timed out
    2009/08/15 13:59:16 ::
    2009/08/15 13:59:16 :: DHCP connection failed
    2009/08/15 13:59:16 :: exiting connection thread
    2009/08/15 13:59:16 :: Sending connection attempt result dhcp_failed
    2009/08/15 14:10:08 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:10:08 :: Removing PID file...
    2009/08/15 14:10:08 :: Shutting down...
    2009/08/15 14:10:59 :: ---------------------------
    2009/08/15 14:10:59 :: wicd initializing...
    2009/08/15 14:10:59 :: ---------------------------
    2009/08/15 14:10:59 :: wicd is version 1.6.2 436
    2009/08/15 14:10:59 :: setting backend to external
    2009/08/15 14:10:59 :: trying to load backend external
    2009/08/15 14:10:59 :: successfully loaded backend external
    2009/08/15 14:10:59 :: trying to load backend external
    2009/08/15 14:10:59 :: successfully loaded backend external
    2009/08/15 14:10:59 :: Automatically detected wireless interface eth0
    2009/08/15 14:10:59 :: setting wireless interface eth1
    2009/08/15 14:10:59 :: automatically detected wired interface eth1
    2009/08/15 14:10:59 :: setting wired interface eth0
    2009/08/15 14:10:59 :: setting wpa driver wext
    2009/08/15 14:10:59 :: setting use global dns to False
    2009/08/15 14:10:59 :: setting global dns
    2009/08/15 14:10:59 :: global dns servers are None None None
    2009/08/15 14:10:59 :: domain is None
    2009/08/15 14:10:59 :: search domain is None
    2009/08/15 14:10:59 :: setting automatically reconnect when connection drops True
    2009/08/15 14:10:59 :: Setting dhcp client to 0
    2009/08/15 14:10:59 :: Wireless configuration file found...
    2009/08/15 14:10:59 :: Wired configuration file found...
    2009/08/15 14:10:59 :: chmoding configuration files 0600...
    2009/08/15 14:10:59 :: chowning configuration files root:root...
    2009/08/15 14:10:59 :: Using wireless interface...eth1
    2009/08/15 14:10:59 :: Using wired interface...eth0
    2009/08/15 14:11:06 :: Autoconnecting...
    2009/08/15 14:11:09 :: Attempting to autoconnect with wired interface...
    2009/08/15 14:11:09 :: Putting interface down
    2009/08/15 14:11:09 :: Releasing DHCP leases...
    2009/08/15 14:11:09 :: Setting false IP...
    2009/08/15 14:11:09 :: Flushing the routing table...
    2009/08/15 14:11:09 :: Putting interface up...
    2009/08/15 14:11:09 :: Running DHCP
    2009/08/15 14:11:09 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:11:09 ::
    2009/08/15 14:11:09 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 14:11:09 ::
    2009/08/15 14:11:19 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 14:11:19 ::
    2009/08/15 14:11:39 :: dhcpcd: timed out
    2009/08/15 14:11:39 ::
    2009/08/15 14:11:39 :: DHCP connection failed
    2009/08/15 14:11:39 :: exiting connection thread
    2009/08/15 14:11:41 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:11:41 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 14:11:41 :: Sending connection attempt result dhcp_failed
    2009/08/15 14:13:00 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:13:00 :: Removing PID file...
    2009/08/15 14:13:00 :: Shutting down...
    2009/08/15 14:13:50 :: ---------------------------
    2009/08/15 14:13:50 :: wicd initializing...
    2009/08/15 14:13:50 :: ---------------------------
    2009/08/15 14:13:50 :: wicd is version 1.6.2 436
    2009/08/15 14:13:50 :: setting backend to external
    2009/08/15 14:13:50 :: trying to load backend external
    2009/08/15 14:13:50 :: successfully loaded backend external
    2009/08/15 14:13:50 :: trying to load backend external
    2009/08/15 14:13:50 :: successfully loaded backend external
    2009/08/15 14:13:51 :: Automatically detected wireless interface eth1
    2009/08/15 14:13:51 :: setting wireless interface eth1
    2009/08/15 14:13:51 :: automatically detected wired interface eth0
    2009/08/15 14:13:51 :: setting wired interface eth0
    2009/08/15 14:13:51 :: setting wpa driver wext
    2009/08/15 14:13:51 :: setting use global dns to False
    2009/08/15 14:13:51 :: setting global dns
    2009/08/15 14:13:51 :: global dns servers are None None None
    2009/08/15 14:13:51 :: domain is None
    2009/08/15 14:13:51 :: search domain is None
    2009/08/15 14:13:51 :: setting automatically reconnect when connection drops True
    2009/08/15 14:13:51 :: Setting dhcp client to 0
    2009/08/15 14:13:51 :: Wireless configuration file found...
    2009/08/15 14:13:51 :: Wired configuration file found...
    2009/08/15 14:13:51 :: chmoding configuration files 0600...
    2009/08/15 14:13:51 :: chowning configuration files root:root...
    2009/08/15 14:13:51 :: Using wireless interface...eth1
    2009/08/15 14:13:51 :: Using wired interface...eth0
    2009/08/15 14:13:57 :: Autoconnecting...
    2009/08/15 14:13:59 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:14:00 :: trying to automatically connect to...101
    2009/08/15 14:14:00 :: Connecting to wireless network 101
    2009/08/15 14:14:00 :: Putting interface down
    2009/08/15 14:14:00 :: Releasing DHCP leases...
    2009/08/15 14:14:00 :: Setting false IP...
    2009/08/15 14:14:00 :: Stopping wpa_supplicant
    2009/08/15 14:14:00 :: Flushing the routing table...
    2009/08/15 14:14:00 :: Putting interface up...
    2009/08/15 14:14:00 :: Generating psk...
    2009/08/15 14:14:01 :: Attempting to authenticate...
    2009/08/15 14:14:11 :: Running DHCP
    2009/08/15 14:14:11 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:11 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:11 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:11 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:15 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 14:14:15 ::
    2009/08/15 14:14:15 :: dhcpcd: forking to background
    2009/08/15 14:14:15 ::
    2009/08/15 14:14:15 ::
    2009/08/15 14:14:15 :: DHCP connection successful
    2009/08/15 14:14:15 :: Connecting thread exiting.
    2009/08/15 14:14:17 :: Sending connection attempt result Success
    2009/08/15 14:14:17 :: Autoconnecting...
    2009/08/15 14:14:17 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:14:17 :: trying to automatically connect to...102
    2009/08/15 14:14:17 :: Connecting to wireless network 102
    2009/08/15 14:14:17 :: Putting interface down
    2009/08/15 14:14:17 :: Releasing DHCP leases...
    2009/08/15 14:14:18 :: Setting false IP...
    2009/08/15 14:14:18 :: Stopping wpa_supplicant
    2009/08/15 14:14:18 :: Flushing the routing table...
    2009/08/15 14:14:18 :: Putting interface up...
    2009/08/15 14:14:18 :: Generating psk...
    2009/08/15 14:14:18 :: Attempting to authenticate...
    2009/08/15 14:14:19 :: Running DHCP
    2009/08/15 14:14:19 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:19 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:19 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:19 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:24 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 14:14:24 ::
    2009/08/15 14:14:24 :: dhcpcd: forking to background
    2009/08/15 14:14:24 ::
    2009/08/15 14:14:24 ::
    2009/08/15 14:14:24 :: DHCP connection successful
    2009/08/15 14:14:24 :: Connecting thread exiting.
    2009/08/15 14:14:29 :: Sending connection attempt result Success
    2009/08/15 14:15:02 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:15:02 :: Removing PID file...
    2009/08/15 14:15:02 :: Shutting down...
    2009/08/15 14:15:52 :: ---------------------------
    2009/08/15 14:15:52 :: wicd initializing...
    2009/08/15 14:15:52 :: ---------------------------
    2009/08/15 14:15:52 :: wicd is version 1.6.2 436
    2009/08/15 14:15:52 :: setting backend to external
    2009/08/15 14:15:52 :: trying to load backend external
    2009/08/15 14:15:52 :: successfully loaded backend external
    2009/08/15 14:15:52 :: trying to load backend external
    2009/08/15 14:15:52 :: successfully loaded backend external
    2009/08/15 14:15:52 :: Automatically detected wireless interface eth0
    2009/08/15 14:15:52 :: setting wireless interface eth1
    2009/08/15 14:15:52 :: automatically detected wired interface eth1
    2009/08/15 14:15:52 :: setting wired interface eth0
    2009/08/15 14:15:52 :: setting wpa driver wext
    2009/08/15 14:15:52 :: setting use global dns to False
    2009/08/15 14:15:52 :: setting global dns
    2009/08/15 14:15:52 :: global dns servers are None None None
    2009/08/15 14:15:52 :: domain is None
    2009/08/15 14:15:52 :: search domain is None
    2009/08/15 14:15:52 :: setting automatically reconnect when connection drops True
    2009/08/15 14:15:52 :: Setting dhcp client to 0
    2009/08/15 14:15:52 :: Wireless configuration file found...
    2009/08/15 14:15:52 :: Wired configuration file found...
    2009/08/15 14:15:52 :: chmoding configuration files 0600...
    2009/08/15 14:15:52 :: chowning configuration files root:root...
    2009/08/15 14:15:52 :: Using wireless interface...eth1
    2009/08/15 14:15:52 :: Using wired interface...eth0
    2009/08/15 14:15:59 :: Autoconnecting...
    2009/08/15 14:16:02 :: Attempting to autoconnect with wired interface...
    2009/08/15 14:16:02 :: Putting interface down
    2009/08/15 14:16:02 :: Releasing DHCP leases...
    2009/08/15 14:16:02 :: Setting false IP...
    2009/08/15 14:16:02 :: Flushing the routing table...
    2009/08/15 14:16:02 :: Putting interface up...
    2009/08/15 14:16:02 :: Running DHCP
    2009/08/15 14:16:02 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:16:02 ::
    2009/08/15 14:16:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 14:16:02 ::
    2009/08/15 14:16:12 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 14:16:12 ::
    2009/08/15 14:16:32 :: dhcpcd: timed out
    2009/08/15 14:16:32 ::
    2009/08/15 14:16:32 :: DHCP connection failed
    2009/08/15 14:16:32 :: exiting connection thread
    2009/08/15 14:16:34 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:16:34 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 14:16:34 :: Sending connection attempt result dhcp_failed
    2009/08/15 14:17:02 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:17:02 :: Removing PID file...
    2009/08/15 14:17:02 :: Shutting down...
    2009/08/15 15:39:03 :: ---------------------------
    2009/08/15 15:39:03 :: wicd initializing...
    2009/08/15 15:39:03 :: ---------------------------
    2009/08/15 15:39:03 :: wicd is version 1.6.2 436
    2009/08/15 15:39:03 :: setting backend to external
    2009/08/15 15:39:03 :: trying to load backend external
    2009/08/15 15:39:03 :: successfully loaded backend external
    2009/08/15 15:39:03 :: trying to load backend external
    2009/08/15 15:39:03 :: successfully loaded backend external
    2009/08/15 15:39:03 :: Automatically detected wireless interface eth0
    2009/08/15 15:39:03 :: setting wireless interface eth1
    2009/08/15 15:39:03 :: automatically detected wired interface eth1
    2009/08/15 15:39:03 :: setting wired interface eth0
    2009/08/15 15:39:03 :: setting wpa driver wext
    2009/08/15 15:39:03 :: setting use global dns to False
    2009/08/15 15:39:03 :: setting global dns
    2009/08/15 15:39:03 :: global dns servers are None None None
    2009/08/15 15:39:03 :: domain is None
    2009/08/15 15:39:03 :: search domain is None
    2009/08/15 15:39:03 :: setting automatically reconnect when connection drops True
    2009/08/15 15:39:03 :: Setting dhcp client to 0
    2009/08/15 15:39:03 :: Wireless configuration file found...
    2009/08/15 15:39:03 :: Wired configuration file found...
    2009/08/15 15:39:03 :: chmoding configuration files 0600...
    2009/08/15 15:39:03 :: chowning configuration files root:root...
    2009/08/15 15:39:03 :: Using wireless interface...eth1
    2009/08/15 15:39:03 :: Using wired interface...eth0
    2009/08/15 15:39:10 :: Autoconnecting...
    2009/08/15 15:39:13 :: Attempting to autoconnect with wired interface...
    2009/08/15 15:39:13 :: Putting interface down
    2009/08/15 15:39:13 :: Releasing DHCP leases...
    2009/08/15 15:39:13 :: Setting false IP...
    2009/08/15 15:39:13 :: Flushing the routing table...
    2009/08/15 15:39:13 :: Putting interface up...
    2009/08/15 15:39:13 :: Running DHCP
    2009/08/15 15:39:13 :: dhcpcd: version 5.0.6 starting
    2009/08/15 15:39:13 ::
    2009/08/15 15:39:13 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 15:39:13 ::
    2009/08/15 15:39:23 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 15:39:23 ::
    2009/08/15 15:39:43 :: dhcpcd: timed out
    2009/08/15 15:39:43 ::
    2009/08/15 15:39:43 :: DHCP connection failed
    2009/08/15 15:39:43 :: exiting connection thread
    2009/08/15 15:39:45 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 15:39:45 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 15:39:45 :: Sending connection attempt result dhcp_failed
    2009/08/15 15:41:46 :: Daemon going down, killing wicd-monitor...
    2009/08/15 15:41:46 :: Removing PID file...
    2009/08/15 15:41:46 :: Shutting down...
    2009/08/15 15:42:33 :: ---------------------------
    2009/08/15 15:42:33 :: wicd initializing...
    2009/08/15 15:42:33 :: ---------------------------
    2009/08/15 15:42:33 :: wicd is version 1.6.2 436
    2009/08/15 15:42:33 :: setting backend to external
    2009/08/15 15:42:33 :: trying to load backend external
    2009/08/15 15:42:33 :: successfully loaded backend external
    2009/08/15 15:42:33 :: trying to load backend external
    2009/08/15 15:42:33 :: successfully loaded backend external
    2009/08/15 15:42:33 :: Automatically detected wireless interface eth0
    2009/08/15 15:42:33 :: setting wireless interface eth1
    2009/08/15 15:42:33 :: automatically detected wired interface eth1
    2009/08/15 15:42:33 :: setting wired interface eth0
    2009/08/15 15:42:33 :: setting wpa driver wext
    2009/08/15 15:42:33 :: setting use global dns to False
    2009/08/15 15:42:33 :: setting global dns
    2009/08/15 15:42:33 :: global dns servers are None None None
    2009/08/15 15:42:33 :: domain is None
    2009/08/15 15:42:33 :: search domain is None
    2009/08/15 15:42:33 :: setting automatically reconnect when connection drops True
    2009/08/15 15:42:33 :: Setting dhcp client to 0
    2009/08/15 15:42:33 :: Wireless configuration file found...
    2009/08/15 15:42:33 :: Wired configuration file found...
    2009/08/15 15:42:33 :: chmoding configuration files 0600...
    2009/08/15 15:42:33 :: chowning configuration files root:root...
    2009/08/15 15:42:33 :: Using wireless interface...eth1
    2009/08/15 15:42:33 :: Using wired interface...eth0
    2009/08/15 15:42:39 :: Autoconnecting...
    2009/08/15 15:42:42 :: Attempting to autoconnect with wired interface...
    2009/08/15 15:42:42 :: Putting interface down
    2009/08/15 15:42:42 :: Releasing DHCP leases...
    2009/08/15 15:42:42 :: Setting false IP...
    2009/08/15 15:42:42 :: Flushing the routing table...
    2009/08/15 15:42:42 :: Putting interface up...
    2009/08/15 15:42:42 :: Running DHCP
    2009/08/15 15:42:42 :: dhcpcd: version 5.0.6 starting
    2009/08/15 15:42:42 ::
    2009/08/15 15:42:42 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 15:42:42 ::
    2009/08/15 15:42:52 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 15:42:52 ::
    2009/08/15 15:43:12 :: dhcpcd: timed out
    2009/08/15 15:43:12 ::
    2009/08/15 15:43:12 :: DHCP connection failed
    2009/08/15 15:43:12 :: exiting connection thread
    2009/08/15 15:43:14 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 15:43:14 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 15:43:14 :: Sending connection attempt result dhcp_failed
    2009/08/15 15:44:27 :: Daemon going down, killing wicd-monitor...
    2009/08/15 15:44:27 :: Removing PID file...
    2009/08/15 15:44:27 :: Shutting down...
    2009/08/15 15:44:48 :: ---------------------------
    2009/08/15 15:44:48 :: wicd initializing...
    2009/08/15 15:44:48 :: ---------------------------
    2009/08/15 15:44:48 :: wicd is version 1.6.2 436
    2009/08/15 15:44:48 :: setting backend to external
    2009/08/15 15:44:48 :: trying to load backend external
    2009/08/15 15:44:48 :: successfully loaded backend external
    2009/08/15 15:44:48 :: trying to load backend external
    2009/08/15 15:44:48 :: successfully loaded backend external
    2009/08/15 15:44:48 :: Automatically detected wireless interface eth0
    2009/08/15 15:44:48 :: setting wireless interface eth1
    2009/08/15 15:44:48 :: automatically detected wired interface eth1
    2009/08/15 15:44:48 :: setting wired interface eth0
    2009/08/15 15:44:48 :: setting wpa driver wext
    2009/08/15 15:44:48 :: setting use global dns to False
    2009/08/15 15:44:48 :: setting global dns
    2009/08/15 15:44:48 :: global dns servers are None None None
    2009/08/15 15:44:48 :: domain is None
    2009/08/15 15:44:48 :: search domain is None
    2009/08/15 15:44:48 :: setting automatically reconnect when connection drops True
    2009/08/15 15:44:48 :: Setting dhcp client to 0
    2009/08/15 15:44:48 :: Wireless configuration file found...
    2009/08/15 15:44:48 :: Wired configuration file found...
    2009/08/15 15:44:48 :: chmoding configuration files 0600...
    2009/08/15 15:44:48 :: chowning configuration files root:root...
    2009/08/15 15:44:48 :: Using wireless interface...eth1
    2009/08/15 15:44:48 :: Using wired interface...eth0
    2009/08/15 15:44:58 :: trying to load backend ioctl
    2009/08/15 15:44:58 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
    2009/08/15 15:44:58 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
    2009/08/15 15:44:58 :: trying to load backend external
    2009/08/15 15:45:57 :: Autoconnecting...
    2009/08/15 15:45:57 :: Putting interface down
    2009/08/15 15:45:57 :: Attempting to autoconnect with wired interface...
    2009/08/15 15:45:57 :: Releasing DHCP leases...
    2009/08/15 15:45:57 :: Setting false IP...
    2009/08/15 15:45:57 :: Flushing the routing table...
    2009/08/15 15:45:57 :: Putting interface up...
    2009/08/15 15:45:57 :: Running DHCP
    2009/08/15 15:45:57 :: dhcpcd: version 5.0.6 starting
    2009/08/15 15:45:57 ::
    2009/08/15 15:45:57 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 15:45:57 ::
    2009/08/15 15:46:07 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 15:46:07 ::
    2009/08/15 15:46:27 :: dhcpcd: timed out
    2009/08/15 15:46:27 ::
    2009/08/15 15:46:27 :: DHCP connection failed
    2009/08/15 15:46:27 :: exiting connection thread
    2009/08/15 15:46:29 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 15:46:29 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 15:46:29 :: Sending connection attempt result dhcp_failed

    Was able to boot this weekend and did an update which updated the kernel.  Rebooted and there was no network.  Rebooted again and no network... rebooted again and... had network!?  I tried changing wicd to use dhclient only and did the triple reboot test again and it didn't change anything... randomly working network... same with dhcpcd.
    So it appears to be a dhcp timeout issue however it makes no sense because before the update a couple weeks ago it was working every time with no hiccup.  Am I not providing enough information that will aid in anyone helping me figure this out?

Maybe you are looking for

  • URGENT:SC creation: "Enter exactly one partner of type Sold-to Party" ERROR

    Hi all, we have a very urgent problem. We are migrating to Production environment and in contract and SC creation we get the error: "Enter exactly one partner of type Sold-to Party". In Test environment this error never appear. We are trying to debug

  • Smart Folder stopped working

    When I first installed Tiger, I created a Smart Folder to display all the Presentations on my Powerbook. A simple "Kind: Presentations" Smart Folder did the job perfectly, displaying all Keynote and PowerPoint presentations. Recently, this Smart Fold

  • ANIMATION SOFTWARE  simple and easy to use

    Didn't know where to post this, so... Does anyone know of a SIMPLE and EASY animation program that I teach my kids to use? I have a budding artist and would like to move those creative juices from pen and paper to the computer. Thanx

  • Cannot open layered pdf file larger than 40mb inside PS CS5

    Hi! I cannot seem to open a layered pdf file 64mb inside the photoshop "out of memory" error, I am trying to get the layers as the source psd file is gone for good and this is the only way I have to get the files for editing. I already increased the

  • MIDP3 info

    Hi All, Where can one get more information regarding the upcoming MIDP3 spec? I am looking to write an application for Pocket PC using Java CDC Personal Profile. However, it would desirable if the app could later be used on other devices such as Palm