Sharing LAN network to PC via Airport

This is wtah I do:
1. Then in the properties of the Airport I create a secure connection using a password
2. I go to Prefs>Sharing>Internet and enable sharing my Ethernet connection to other computers via Airport.
3. Then I turn on my Airport and try to connect a PC to the secure network.
Results:
If the network is secure Windows XP SP2 Home edition cannot connect to network shared from my MacBook.
2. If I create an open network, no password protection - I connect other PCs without problems.
3. Though I connect, the connection is quite low, whereas my LAN internet is quite fast.
So, here are my questions:
1. Is it possible that my Internet providers do something to restrict/limit the options to share the network?
2. Can they controll the speed if I share my networkvia Airport?
3. If this is a problem solely related to my MacBook and PC settings, please, advise how to solve it!
Thanks!!!

And there is no work around?
None that I am aware of.
Is it same with AirPort routers?
No. You should have no problem with an Apple base station.

Similar Messages

Sharing internet connection with Windows via Airport

Happy New Year, all!
I have an iMac Intel Core Duo connected to an ADSL modem via ethernet. I'd like to share my internet connection via Airport with a Windows laptop (which is running XP with SP2). I've read that this is possible and I've tried setting it up but the laptop isn't seeing the Airport network at all.
I've created a network with security off, from the Airport drop-down menu in the iMac menu bar, turned Internet Sharing on (Share from: ethernet - to computers using: Airport). I have Windows Sharing and Personal Web Sharing turned on, and my firewall is off. But the Airport network still doesn't show up on the laptop.
Can anyone tell me what I'm doing wrong, or at least point me in the right direction.
Many thanks in advance.

i am having the same problem. i have the mac connected but when i go to windows i can't get the page open that says to connect. when i run the mouse over the icons at the bottom of the page it shows the airport signal being excellent. but i just can't get to a page to enter the "key to connect". it is greyed out and shows that it is limited or not connectivity.
please someone help!
movie lady

Network camera access via airport extreme ie: i need to assign a port and a

please help me i have a cabin in the mountains that is off the grid... and i use solar power... i have my internet access via wifi and an antenna... it goes to a d-link router in my electric room then from there via a cat 5 cable to a apple airport extreme base station... and i would like to plug the camera into the base station via a cat 5 cable....
i am trying to set up a network camera to via a airport extreme base station.... the tech support on the camera end (airlink 101 skyIP cam500 model aicn500) said to enable port 80 and to assign a IP address (which i have)... apple support has been unable to help me after almost 1 hour with tech support.... here is what the camera tech support page suggests....
You will now need to forward the Second HTTP Port through your router to the IP address of the camera. If you have an AirLink101 router, we have instructions in our knowledge base for port forwarding. If you have a router from another company, you will need to contact them for instructions on port forwarding.
When accessing the camera from a remote location you will need to open a browser and type in the internet IP address of your network (not the ip address of the camera) and the port into a web browser. The address and port will need to be typed in like this:
http://x.x.x.x:port
x.x.x.x = Internet IP address
port = Second HTTP Port
Here is an example of what it would look like: http://123.123.123.123:81
can anyone please help me?

i can not thank you enough for taking the time time to help me!!! i really appreciate it.... i have done the set up with the d link router and am now trying to access the camera from the web.... but i am having trouble logging in and finding it? i am not sure what ip address to enter into my web browser? i think that i need to add the ip addresss folllowed by a forward slash and then the port # 80.... but what ip address should i add? in the device info part of the d link router i have found a number of ip address's... but none of them seem to work? what am i doing wrong? or not doing? my apple base station is set up in the bridge mode with a password to protect it...
thanks again...
josh

Finder freezes when attempting to access a "shared" external hard drive (wireless via Airport Extreme)

Finder freezes. As soon as I click onto my "shared" external hard drive (3TB WD - wireless via Airport Extreme), finder immediately freezes / eternally spinning beach ball (until I restart finder). Can still access wirelessly on another Mac (not on Yosemite).
Please help!

Ok - for a while there, the hard drive would not come up on the desktop - but now on a re-boot of the compter, or if I disconnect the hard drive and re-connect it, a message comes up with three buttons which say:
Initialize
Ignore
Eject
Sound like the hard drive has died?

Problem with sharing internet connecting with Wii via AirPort

I have an iMac running the latest updates of 10.0.4. My internet is DSL, so it comes into the modem via the phone, and then the modem connects to the iMac via an Ethernet cable. ie: I don't have a wireless network.
I just bought a Wii and want to connect it to the internet using the built in AirPort feature of the iMac. After I turn on Internet Sharing in Sharing, the Wii will find the iMac as an Access Point (that's the term in the Wii menu).
The problem I have is that the Wii will not connect to the internet unless I turn off the firewall in OS X. Obviously, this isn't a great solution to getting the Wii connected.
Does anyone have any idea of how to allow the Wii through the firewall without turning off the firewall.
Thanks.

Though this link talks about blocking them, you should be able to reverse it...
http://www.ist.uwaterloo.ca/security/howto/2007-07-31/
In the Firewalltab>Advanced, is UDP being blocked? You can also open specific ports.

Networking G5 Imac Over Airport

Hi,
I have two brand new Imac G5s in the house, can I network these computers via airport - they are both connected to the internet but it would be a great help if I could use the other pcs printer and access files.
Dave

Hello Cooperd
in your first post you said
I have two brand new Imac G5s in the house, can I network these computers via airport - they are both connected to the internet but it would be a great help if I could use the other pcs printer and access files.
So if both of these iMacs are connected to your wireless broadband connection then they are already networked you don't need to create a separate computer to computer network it is just case of turning on file sharing and printer sharing in the sharing preferences.
If your PC's are also connected to your Wireless Broadband connection then they would be on the same network of your iMacs.
ifelix has written some geat howto's so have a look at his pages about mac to pc printer sharing and file sharing.
http://www.ifelix.co.uk/tech/tiger.html

Weird lost access to iMac's desktop via Airport Extreme wireless LAN

This is weird and complicated. I'll try to keep it simple.
1. Two computers on a wireless LAN via Airport Extreme: G4 Powerbook and 20" G5 iMac. The LAN has worked flawlessly and seamlessly for several years, and except for this ONE anomaly, still does.
2. When logged-in to the iMac from the Powerbook, all its files and contents show up normally in it's networked-drive window in Finder,
3. EXCEPT the desktop. And I mean the real desktop which is under my ID under USERS.
4. Searching the Powerbook from the iMac, however, works just fine and shows all of the Powerbook's contents.
Repairs of Permissions on both computers have accomplished nothing.
There is one other peculiar symptom: there was a .wmv movie file sent me by a friend, and I had a copy of it on the desktops of both computers. It sat there, showed up and ran just fine, until one day something curious happened:
The file would show up in the column-view Finder window of the iMac's desktop when I opened it from the Finder Window, but would, after about a second, disappear!
If I try to import, on the Powerbook, some random file into the iMac's Desktop folder, it appears for a brief second and then the folder once again displays as empty.
I have trashed that wmv file, and yet sometimes its name blinks up on the iMac's desktop list (that is, again, the column view display in the Finder window).
This is profoundly weird.
Oh, and there's nothing changed or weird about the SHARING settings. Personal File Sharing is enabled on both computers, as is Printer Sharing, and itunes music sharing is also enabled. All of these continue to work just fine. Firewall is enabled, but always has been.
Owen

Well, when in doubt try all the obvious things FIRST!
I rank Disk Utility from the install disk, did a disk repair, and, well, Bob's your uncle, and all is fine again. Apparently that ghost file screwed up the count of files (I'm not sure what that means, but it seems consistent with a file that would materialize and then disappear, and screw up display of a folder's contents - the folder it was lurking-in invisibly.
Very peculiar, none the less.
Owen
I'll leave this open for another day, if only to see if someone has an explanation for what may have happened, since that might be useful to others, besides satisfying my own curiosity.

Sharing airport network connection to an airport base station over ethernet

Hi there,
I've got a network connection to the internet via Airport, on my iBook G4 with OS X 10.4.9.
This iBook is connected to the LAN port on an Airport Express base station (for physical wiring reasons, it cannot be connected to the WAN port).
This Airport Express has a dozen other computers attached to it.
Does anyone know how I might be able to share my internet connection, via the LAN side of the Airport Express, to all these other computers?
Incidentally, when I turn on both the Ethernet LAN connection and the Airport internet connection, I stop being able to communicate over the internet connection. When I disable the LAN, the internet connection returns.
Thanks,
Brian

It turns out that in
System Preferences->Network->Show: Network Port Configurations
You can change the order of the networking by dragging the Port Configurations.
Network sharing wasn't working for me because Ethernet was above Airport, therefore Airport wasn't being used as the internet connection. Having dragged Airport above Ethernet, it is now being used for the internet, and the sharing across the Ethernet works quite soundly.

MBP no longer connects to network via Airport

today my MBP will not connect to my network via airport. Several other apple devices connect to the network no problem. MBP connects to the network OK via ethernet cable.
When I try to connect it just keep prompting for network password & user password, generates spinning wheel but then returns invalid password dialogue box. Tried several times and no success - occasionally there is an additional dialogue box " Apple80211agent......."
Pass word is fine as 5 other devices connect without any issue. What is going on?
Incidentally, just thought to create another Airport connection and hey presto it connects.
Still confused.

Your local LAN runs through your router.
All your ethernet ports, and your modem and router, should be behind and filtered from excess current. That means a UPS generally. And run input line thru UPS (coax) first, then run RJ45 back through UPS again (there can still be excess surge or current on the line).
Modems and routers can be compromised by surge outage or storm. So can ethernet ports.
You have two ethernet ports and you tried with both also.
What you did not do that I would have added is SMC Reset / Reset NVRAM/PRAM.
This is what I have had for the last year, very nice and stronger signals thruout the house.
http://www.amazon.com/NETGEAR-Wireless-Router-Gigabit-R6200/dp/B008HO9DIG/

Trying to get my Viera TX-P42S30B hooked up to me home network via Airport express with no luck.

Trying to get my Viera TX-P42S30B hooked up to my home network via Airport express with no luck.
Have tried both wired (network cable) and wireless to no avail, can't find much info online, any help appreciated !
Airport utility 5.5.3
Airport Extreme 802.11n
Airport Express 802.11g

The problem is that the AirPort Express (AX) is creating a subnet.
To prevent that, configure the AX to act as a bridge (so that it is NOT sharing a single IP address).

Can't do Internet Sharing via Airport, laptop PC to iMac

Help! I'm trying to connect a Windows laptop to my Mac via AirPort to do Internet Sharing. I have Internet Sharing turned on and AirPort is on.
The laptop PC can see the Mac, but it has a red X and the following message:
"The settings saved on this computer for the network do not match the requirements of the network."

I'm finding, after working at it for a while, that "Frank's Computer" shows up as an ad hoc network on the laptop PC and the wireless connection is solid, but Internet Sharing still isn't working. Is there a distinction between ad hoc networks and Internet Sharing? Could it not be working because an ad hoc setting has been made and Airport can't do two things at once?

Trouble printing to Epson Workforce 435 via airport express network

We have an Epson Workforce 435 printer that connects wirelessly to our home network via Airport Express. After we switched to AT&T, we could no longer print from our Windows 7 PC connected to the network via Airport as well. Our Macbook air works just fine. The printer's network status sheet says it is connected, but it's like our computer can't find it on the network. Can't ping the printer's IP address either.

Okay, I have checked the settings on the AX - it is set up to be 802.11b/g compatible, so that doesn't appear to be the problem.
I had a friend come over with her macbook - she was able to detect the wireless network, but wasn't able to connect to it, even when I gave her the password. Does this help diagnose the problem?
Here is additional information about how the AX is currently configured:
In the Airport tab in AirPort Utility:
Wireless Mode: Create a wireless network
Radio Mode: 802.11b (802.11b/g compatible)
Channel: 1
Wireless security: WEP
MAC Address Access Control: Not Enabled
In the Internet tab in Airport Utility:
Connect using: Ethernet
Configure IPv4: Using DHCP
Ethernet WAN port: Automatic
Connection sharing: Off (Bridge mode)
I have tried turning wireless security off, but that didn't help the problem. I have also tried turning MAC Address Access Control to Timed Access, inputted the MAC address of the printer, and gave it permission to access the network all day, everyday, but this didn't work either. I have looked at changing the connection sharing settings, but I don't really understand what I'm doing here, so I am reluctant to mess with things much. This seems like the most promising potential solution?
Thanks!

Sharing a 3G usb modem on the iMac via Airport Express

Hi,
I would like to be able to share my 3G/HSDPA USB Modem that is currently connected to my iMac over the Airport Express wireless network at home. The objective is to let every computer (PC and Mac) connected to the wireless network (Airport Express) to be able to access the internet via the iMac 3G/HSDPA connection.
I could have shared the 3G connection directly via the Internet Sharing, but this would require the computers to switch wireless network.
Can anybody describe on how to achieve this?
Regards,
Hindra

Finally, after several tries with the guidance of Duane's posts on how to set it up, I got this to work.
Objective: To be able to share a 3G wireless connection connected to an iMac using 3G USB Modem with the rest of the network connected via wireless Airport Express.
{Internet} <---> 3G USB Modem <---> iMac <---> Airport Express <---> Other computers (PC and Mac)
1. Set the Airport Express to Join a Wirelss Network, and name the network to be the same name as the name of the network set in the Internet Sharing (on the iMac)
2. Set the Internet Sharing on the iMac, and share the 3G USB Modem network name to the Airport network and name the Airport network to be the same as No. 1
3. That's it....
Big Thanks to Duane for your help.
Regards,
Hindra

Apple TV2 with iMac via AirPort but without W-Lan?

Hello Apple TV insiders
I have my iMac connected to the internet with cable-LAN. iTunes is ready and the iMac has AirPort. I have no Wireless LAN. Will I be able to connect Apple TV 2 to my iMac via AirPort without W-LAN? (They couldn't tell me at my local Apple dealer...)
Thanks for information or links!
Morgy

If your network doesn't have wifi, connect your devices by Ethernet, wifi is not a necessity and indeed Ethernet is always the best way to connect things on a network.
An ad hoc network created with your iMac cannot be used with the Apple TV.

Internet sharing via airport woes

Hi,
apparantly an thunderstorm fried my ethernet-card in my MBP this morning. Now I am struggling to get internet-access via my iBook G3 which has DSL-boradband via ethernet (pPOE) (either via firewire or airport) but don't succeed:
1) file-sharing eithert via airport or ip over firewire works
2) I have set up my iBook to share internet via airport, enabled web sharing as HELP recommends.
Internet sharing nevertheless doesn't work for me: error message (in network-status) says (translated from German):
…Airport has self-assigned IP-Address and is maybe not able to connect to the internet.
I have used the built in settings, changed nithing manually. Any ideas?
Greetings,
Rolf
(rather desperate)
MBP C2D 2.33 GH, 160GB HD, 2GB Ram Mac OS X (10.4.9)
MBP C2D 2.33 GH, 160GB HD, 2GB Ram Mac OS X (10.4.9)

OK. To your information. Today I tried the following: I switched off and on internet sharing twice after boot and voila, wifi seems to work fine. Yeah, that´s what I call a sophisticated computer system. Really crappy stuff!

Sharing LAN network to PC via Airport

Similar Messages

Maybe you are looking for