Sharing Limited to 5 views a day?

I am in a college residence and we are hooked up to a network so we can see each others songs and listen to them but when people click me it usually says that I limit it to 5 users a day. Is there a way to change this so it is unlimited? Thanks.

Unfortunately no, but you can put a password on your library so that you can control who is looking at it.
Click Edit > Preferences
Click the Sharing tab
You can also completely exit and restart iTunes to reset that count, so other people can access your library.
CG

Similar Messages

  • Using family sharing, how does one view and download songs from a family member's collection in itunes?

    Using family sharing, how does one view and download songs from a family member's collection in itunes?

    When you click on your device you are presented with the pages
    Summary
    Info
    Apps
    Tones
    Music
    Movies
    TV shows
    Books
    Photos
    To remove Audiobooks depending on the type of Audiobook ie a series of mp3 files you will find under music and probably have to deselect the album name to remove it. I don't have any of these as I download from Audible or I use Audiobook Builder to stictch together mp3 files into m4b files. To find these Click on Books you will immediately see a section for books (in reality ebooks). Scroll down past that and you will see Audiobooks where you can select and deselect. Deselect the required Audiobooks and Click Sync

  • View Modes - Day-Week-Month

    Does anyone know of any way to add a quarterly view mode? (in otehr words being able to see 90 days at a time as an added view option - Day/Week/Month/Quarter)
    If not, are there any third party workarounds that can modify and provide a 90 day view mode in iCal?
    At the very least is there any EFFECTIVE way to communicate and get this easy enhancement added to the upcoming version of iCal.
    It is incredibly inconvenient to have to move calendar items to the following month with the restrictive view of only one month. IN other words, if I wanted to move an appointment from February 24 to say March 20 I am forced to manually open the item and type in new dates.
    A great system program known as DateBook Pro 4.0 had such a view option and I absolutely miss it EVERY day!

    I am experiencing the same symptoms - Day, Week, Month and the Today button are all grayed out. It particularly seems to happen if I've left iCal running overnight. The only way I've found to fix it is to re-start iCal. When this is happening, the only way to navigate to a different week (or month) is to use the menu "Go to date" function. I think the onset of this problem relates to an Apple software upgrade , but I can't be sure which one.

  • IOS 7 Calendar on iPad I cannot go from month view to day view. When I tap on the day of the month nothing happens.

    I use to be able to look at my month in the month view and when I wanted to make an appointment for a specific day I just tapped that day and it would open up the day and I could add my appointment to the time slot I wanted. Now when I am in month view and I tap on the day I want to make an appointment it does nothing. If I hold my finger on the day it creates an All Day event which is not what I want to do and even if I add a start time to the event, I don't know what times I have available on that day because the Day view hasn't opened. This is extremely frustrating. On my iphone it works properly...I can go from month view to day view by tapping on the day I want to view. Why can't I do this on my iPad?? If I could go back to ios 6 I would, calendar is not impressive at all!!
    Please help with any suggestions or PLEASE APPLE.....FIX THIS!!!

    I just tested, and this unfortunately still seems to be a bug in the latest iOS 7.1 release of the Calendar on the iPad, which is too bad since the release notes suggest that this iOS update included both bug fixes and enhancements to the Calendar.
    To my knowledge the bug has never been an issue on the iPhone version of the Calendar which behaves exactly as you would expect it should.
    It seems inconcievable given the obvious broken-ness of the current behavior coupled with what I would expect is a massive number of people who use the Calendar on the iPad, but is it possible that this bug isn't on Apple's radar?
    I'm happy to submit a bug report; does anyone know offhand the process for how the public can report bugs?
    This has been persistent in the product for nearly six months; it's well overdue that this bug be squashed.

  • How to View Multi-Day Events on iPad Calendar?

    I am using the iPad, 3rd generation and new MacBook Pro Retina with Mountain Lion.  My "Home" calendar is synchnoized between the two with iCloud.  I have two options when entering multi-day events: enter them as an all-day event or enter them with specific start and stop times over multiple days.  I prefer to enter specific times because all-day events only appear as headers in calendar view on my Mac.  I prefer to see the times highlighted by the color of the calendar legend.  I often miss the headers when scanning days. 
    Here is my problem.  On the Mac, in Month view, multi-day events appears as a higlighted stroke over multiple days.  On the iPad, only the starting day of the event is highlighted.  All-day events do appear over multiple days, but I need the start times.  Is it possible to have multi-day events with times to appear as highlighted strokes over multiple days?
    Thank you,

    You are correct; as fair as i am aware apple should be giving us an option in the next couple of updates to keep longer history of iCal events;
    There is another way however it will more then likely cause double ups and errors: If you want the steps for that let me know.

  • Calendar from month view to day view

    Hi,
    why isn't it possible (like on my iPhone) if I'm in the month view to tip on a specific day and see this day in the day view?
    I adressed this already at the Apple Feedback page but it seems to be thaat even in iOS 7.1 it has not made into the finals - or am I doing it just wrong?
    Cheers
    Joerg

    I share your frustration Joerg - when I switch from MONTH view to DAY view, I seem to end up on a random day rather than the day I'm trying to choose.
    My 'workaround' is to double-click on the chosen day to create a New Event, then click across to Day view, then hit erase o get rid of the unwanted new event.  Surely there must be a better way?
    Cheers
    David

  • What are the limitations of the free 30-day InDesign trial?

    What are the limitations of the free 30-day InDesign trial?

    There are no limitations for 30 days, it will work exactly as if you have a subscription. But if you don't get a subscription, after 30 days, you will no longer be able to launch the program.

  • ICal, Touch, List view and Day view limitations

    It seems a recent software update now imposes a limit of six items on my iPod Touch Calendar when using the Day view. I distinctly remember this not being the case very recently. In order to see more than six all-day listings I have to use List view, which I don't like as much. Can anybody verify this change and suggest a work-around? I've tried a reset but no luck. thanks...

    pinkbeats wrote:
    +1 to it's return.
    Seems strange that it's been removed when, with the increased convergence of OS X and iOS, it's a view that available in the Calendar app in iOS.
    Like others here, this was the most useful view for me and I'm disappointed it's not there, hope it comes back with the Yosemite .1 release.
    Unfortunately it hasn't .

  • Can I see how many times a shared album has been viewed?

    I primarily use Revel to share photos of events since the files get too big to email more than 2 at a time.  Usually, there is a very limited group of people that would be interested but the link to one album was shared on Facebook and I'm curious to see if many people viewed that album.  Is there a way to see how many times the album has been viewed?

    Use your account credentials to log on to iTunes Connect. Or use those same credentials with one of the 3rd party app reports management tools such as AppViz, AppAnnie, etc.
    iTunes Connect
    https://itunesconnect.apple.com/ 

  • How to see Shared Members in Smart View on Ad-hoc Analysis mode

    Hi All,
    We are using Hyperion Planning v 11.1.1.3.
    For the alternate hierarchy we have created shared members. But in Smart View we are unable to see Shared members hierarchy in Ad-hoc analysis mode.
    Is this limitation in Hyperion Planning?
    Or
    Is there any way to see shared members Hierarchy in Smart View in Ad-hoc analysis mode?
    It is urgent requirement Please let me know as early as possible
    Thanks in Advance!!!

    When you say open data form in Ad-hoc mode, can you do that? I think when you select Ad-hoc mode, you are basically connecting to Essbase and therefore need to manually select the members. (of course, I've got a 11.1.2 env right now so not too sure of 11.1.1.3)
    I'm able to just go to Member Selection and select whatever hierarchy i want, Shared or Stored, when I'm connected to Essbase. When connecting to Planning, I dont have any option of opening the form as Ad-hoc mode.
    Can you see the hierarchy if selecting the members using Essbase connection and not planning?
    Cheers,
    Abhishek

  • Sharing Limitations?

    Hi:
    Have searched the many "sharing a library" threads, but this covers slightly different ground:
    I'm not looking to let other users have any kind of Add To or Edit type access to a Shared library, but...
    I would like them to be able to search that library they're viewing using keywords, etc., AND to be able to drag copies of those images from that shared library into their own iWeb projects, for example.
    Am I correct (albeit surprised and disappointed) that you can't do that? That you can import images from a shared iPhoto Library into your own library, but you CAN'T simply drop those images into an iWeb project. That you can see all the images in the shared library, but you can't SEARCH through those images using the keywords which have already been assigned to them by the main user?
    None of these acts involves changing anything about the master library or its database -- does it? -- so how come both seem to be forbidden? Am I missing some preference setting vis-a-vis shared libraries?
    (And for that matter, why is a shared library -- which shows up just fine in the left hand pane of iPhoto -- not also visible under the photo tab in iWeb's Media Browser?)
    Again -- I'm not wanting the "other users" to be able to change or edit anything in the actual library, just to be able to fully SEE everything (including the keywords), and if they so desire, to make copies of those images by dragging them into the windows or image placeholders of other Apple/iLife apps -- and to be able to do that without first having to import those images into their own separate iPhoto Libraries.
    It just seems like the way things should work in a world of tightly-integrated consumer-friendly apps on a multi-user machine.
    So -- is there perhaps some Permission thing I need to set or re-check, or is it just time for another feature request to the iPhoto Feedback site?
    John Bertram
    Toronto

    According to the iTunes Store Terms and Conditions I read the limitations are based on what is termed 'Associated Devices.' The limits are based on 10 Associated Devices, provided no more than 5 are iTunes-authorized computers. Also, Apple TV is not considered an 'Associated Device.'
    By my count you have a total of 8 or 9 Associated Devices:
    1 Mac Pro and possible another computer
    3 iPads
    2 iPhones
    2 iPod Touchs
    1 Apple TV (does not count against your limit.)
    Regardless the limitations are believed to be based on licencing restrictions imposed my the media companies. It's possible that if it were up to Apple there would be more liberal restrictions.

  • Overwritten shared events in "Today View"

    My wife and I share our calendars through gmail.  I have both calendars visible in my calendar.  Sometimes she invites me to events so that they pop up on my personal calendar as well, if I need to be there.  It works fine in the calendar app, but in the "Today View", any shared events appear to be overwritten by the next event in my calendar.  It's clearly an iOS bug.  I've tried adding/removing the calendars, but it still appears wrong.  Screenshot here http://imgur.com/qkK6TwD.(photo upload not working)   I use an  updated iPhone 4s.  My wifes iphone 5 doesn't appear to have the issue.

    In the settings app under notification Center make sure that you have the calendar day view  selected.
    If that doesn't work
    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Limitation on file VIEW

    I've encountered what appears to be a file size limitation when using the VIEW link and am wondering if anyone knows if there is some configuration change that can overcome the problem. I have a Powerpoint .ppt file that is almost 30MB. The file uploads to Teaming fine, and can be edited and saved back fine. However, when using "VIEW", a browser window opens and after some delay, the following shows up: "HTML Conversion Error" and "Error: Html conversion failed for file.ppt: (2050) The export process timed out." If I cut the file down in size, it works fine. Is there any configuration to adjust the timeout period?

    By default, the Stellent converters are given 30 seconds for any single
    conversion. The conversion of your document is taking longer than that.
    You can bump this limit using a setting in your ssf*.properties files.
    In the ssf.properties file, find the line:
    conversion.timeout.ms=30000
    Copy that to your ssf-ext.properties file and bump that 30000 to
    something larger. That will give the converters more time to perform
    these conversions.
    MacWiz.
    On 11/30/10 7:36 AM, dangross wrote:
    >
    > I've encountered what appears to be a file size limitation when using
    > the VIEW link and am wondering if anyone knows if there is some
    > configuration change that can overcome the problem. I have a Powerpoint
    > .ppt file that is almost 30MB. The file uploads to Teaming fine, and
    > can be edited and saved back fine. However, when using "VIEW", a
    > browser window opens and after some delay, the following shows up: "HTML
    > Conversion Error" and "Error: Html conversion failed for file.ppt:
    > (2050) The export process timed out." If I cut the file down in size,
    > it works fine. Is there any configuration to adjust the timeout period?
    >
    >

  • Firefox will not open for other users on a shared computer with individual accounts one day after installing Firefox

    On a computer that is shared with multiple users(3),two of the users cannot open Firefox,only one user can. It shows the blue circle (Windows 7) but it disappears and does not open. Task Manager shows its running,but after closing,it won't open. Are there settings to adjust in Windows,or on Internet Options?
    I am running Windows 7 Ultimate with SP1 installed.

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!

  • Sharing information between tiled view and view bean

    I have come across one more problem. I have a search result
    page. This search result page has a static text field and a repeated group
    (I simplified the page description, for explanation purpose). In the NetD
    implementation they are maintaining a page level attribute (say boolean
    haveSenisitiveCustomers) and setting this attribute in the
    afterDataObjectExecute event. (This data object is associated with the
    repeated). In end display event of static text field, they are displaying
    message say " due to Registration type, not all customers meeting the
    criteria are listed") if the haveSensitiveCustomers flag is set.
    After Migration, the boolean flag and static Text Field movedto
    SearchResultViewBean and afterDataObjectExecuteEvent has moved to
    TiledViewBean. Actual processing done is more complicated than this
    explanation. However, it boils down to sharing information between
    tiledViewBean and its parent bean. How do we achieve this in the Migrated
    Application?
    One way is to add getter methods in the child tiled view bean( to
    access in parent view bean, call getRepeated1 and cast to the actual type
    and invoke the get methods)Probably the typical solution (I say typical because I don't yet know) will
    be to do what you suggest: provide methods between views that can be used to
    determine the state needed for processing like this.
    However, let me alert you to something that's different than ND, and which
    may cause you some trouble. In ND, all retrieving DataObjects associated
    with a page executed at one time, and the afterDataObjectExcecuteEvent fired
    before any display processing began. However, in JATO, tiled views are
    independent objects, and any models associated with them only execute when
    the tiled view is first displayed.
    Therefore, if the static test field you refer to appears in the page before
    the tiled view, then the tiled view will not have executed its associated
    model before the static text field is rendered. You will never see the
    static text field display the text you want because you won't have the
    information at display time. (If the text field appears after the repeated,
    then it's not problem, as the display of the tiled view will have executed
    the associate model before the field displays.)
    The solution is to manually reference the tiled view and its associate model
    before they would normally execute. You would execute the model and set the
    tiled view's setAutoRetrieveEnabled() to false to prevent it from executing
    the model a second time. Perhaps the easiest thing to do would be this:
    beforeStaticTextDisplay(...)
    // Force the tiled view to execute the associated model
    Repeated1TiledView tiledView=
    (Repeated1TiledView)getChild("Repeated1");
    tiledView.beginDisplay();
    tiledView.setAutoRetrieveEnabled(false);
    Although the beginDisplay() method will be executed twice in this case (once
    deliberately, above, and later during actual display), there should be no
    overhead. The beginDisplay() method doesn't do anything anyway except
    execute associated auto-retrieving models and fire the
    afterAllModelsExecute() event.
    Mike, do you concur or have any comments?
    This explanation rests on the understanding of a number of other subjects,
    some of which you may not be fully familiar with. Feel free to ask further
    questions about this explanation.
    Todd
    Todd Fast
    Senior Engineer
    Sun/Netscape Alliance
    todd.fast@e...

    I have come across one more problem. I have a search result
    page. This search result page has a static text field and a repeated group
    (I simplified the page description, for explanation purpose). In the NetD
    implementation they are maintaining a page level attribute (say boolean
    haveSenisitiveCustomers) and setting this attribute in the
    afterDataObjectExecute event. (This data object is associated with the
    repeated). In end display event of static text field, they are displaying
    message say " due to Registration type, not all customers meeting the
    criteria are listed") if the haveSensitiveCustomers flag is set.
    After Migration, the boolean flag and static Text Field movedto
    SearchResultViewBean and afterDataObjectExecuteEvent has moved to
    TiledViewBean. Actual processing done is more complicated than this
    explanation. However, it boils down to sharing information between
    tiledViewBean and its parent bean. How do we achieve this in the Migrated
    Application?
    One way is to add getter methods in the child tiled view bean( to
    access in parent view bean, call getRepeated1 and cast to the actual type
    and invoke the get methods)Probably the typical solution (I say typical because I don't yet know) will
    be to do what you suggest: provide methods between views that can be used to
    determine the state needed for processing like this.
    However, let me alert you to something that's different than ND, and which
    may cause you some trouble. In ND, all retrieving DataObjects associated
    with a page executed at one time, and the afterDataObjectExcecuteEvent fired
    before any display processing began. However, in JATO, tiled views are
    independent objects, and any models associated with them only execute when
    the tiled view is first displayed.
    Therefore, if the static test field you refer to appears in the page before
    the tiled view, then the tiled view will not have executed its associated
    model before the static text field is rendered. You will never see the
    static text field display the text you want because you won't have the
    information at display time. (If the text field appears after the repeated,
    then it's not problem, as the display of the tiled view will have executed
    the associate model before the field displays.)
    The solution is to manually reference the tiled view and its associate model
    before they would normally execute. You would execute the model and set the
    tiled view's setAutoRetrieveEnabled() to false to prevent it from executing
    the model a second time. Perhaps the easiest thing to do would be this:
    beforeStaticTextDisplay(...)
    // Force the tiled view to execute the associated model
    Repeated1TiledView tiledView=
    (Repeated1TiledView)getChild("Repeated1");
    tiledView.beginDisplay();
    tiledView.setAutoRetrieveEnabled(false);
    Although the beginDisplay() method will be executed twice in this case (once
    deliberately, above, and later during actual display), there should be no
    overhead. The beginDisplay() method doesn't do anything anyway except
    execute associated auto-retrieving models and fire the
    afterAllModelsExecute() event.
    Mike, do you concur or have any comments?
    This explanation rests on the understanding of a number of other subjects,
    some of which you may not be fully familiar with. Feel free to ask further
    questions about this explanation.
    Todd
    Todd Fast
    Senior Engineer
    Sun/Netscape Alliance
    todd.fast@e...

Maybe you are looking for