Sharing multiple photos on IPad. I don't see a"share" button on the camera roll or on after I touch the send/share button on the upper right. What am I doing wrong?

I'm trying to attach multiple photos to email.  Sounds simple....except I don't see a "share" button on the lower left side In photo roll or when I touch the send/share button.  Yes, that would be in photos.  What am I doing wrong?

Tap the square with arrow on top right
http://i1224.photobucket.com/albums/ee374/Diavonex/edb18be9.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/c33705eb.jpg
Note: Maximum five photos

Similar Messages

  • HT1766 My IPAD software update is avail for the iOS 7.0.3   I keep trying to install it.  I have my IPAD hooked up to my MAC and the Wi FI,  I have internet open  It keeps telling me now connected to internet.  What am I doing wrong.

    My IPAD software update is avail for the iOS 7.0.3   I keep trying to install it.  I have my IPAD hooked up to my MAC and the Wi FI,  I have internet open  It keeps telling me not connected to internet.  What am I doing wrong.

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.

  • Need to backup and remove photo library form my iphone.  This library was previously backup on a hard drive that crashed.  So these photos are only in the photo library and not in the camera roll.  If I do a full backup, it only takes the camera roll.

    Need to backup and remove photo library from my iphone.  This library was previously backup on a hard drive that crashed.  So these photos are only in the photo library and not in the camera roll.  If I do a full backup, it only takes the camera roll.
    So this is a 2 part question:
    1) how to I backup the Photo Library to my new hard drive (as the last one was unrecoverable but previously backed up)
    2) how do I remove the Photo Library form my phone (preferably after backup in item 1)
    Thanks, Janis

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

  • I transferred photos from my camera to my computer and created a burn folder.  I recorded the burn folder on a DVD but it will not play on my DVD player.  What am I doing wrong?

    I transferred photos from my camera to  burn folder on my macbook Pro.  Made a DVD from the burn folder but it will not play on my DVD player.  What am I doing wrong?

    How did you do this burn? Did you use a program like iDVD?  A DVD player requires that the data on the DVD is recorded in the proper format: MPEG-2.  A program like iDVD will do this.  There are other programs available that can do the proper coding (Roxio 'Toast' for example), but iDVD has the most features and is easy to use.  It is no longer available from Apple, but if you search on Amazon, you can find 'iLife 11', a suite of programs including iDVD.  It will function properly on Apple's current operating system, but it cannot make a High-Definition (Blue-Ray) presentation.  It is Standard Definition only, as are all regular DVD's. One good way to present photos on a TV is to make a slidesow in iPhoto, then export that slideshow to iDVD, where it will be properly formatted for a DVD player.  Or, iDVD can make its own slideshow of up to 99 photos.  HTH.
    Frank

  • HT201272 I downloaded (2) Albums, can see them in i-tunes Media file, I click and drag them to i-tunes library folder and nothing happens.  What am I doing wrong????

    I downloaded (2) albums and they wound up in my i-tunes Media file.  I try to drag them to the i-tunes music library and nothing happens.  What am I doing wrong???//

    Hello! I am not sure what you mean by the first part of your question, but you can't drag the music to the ITunes library. What I would do is make a folder on your computer and drag the music you want there. Then you go to ITunes, click on "File" on the top-left corner of the screen. Go down to "Add folder to library". Select the one that has your music and it will download to your ITunes library. Hope that helped!

  • Does any1 hav issues with not being able to send pic from the camera roll. I've already had issues with over exposure that the new update fixed but it left me with this issue.

    Since getting my iPhone 5 I've had camera issues. To start with it was over exposure, the camera was flashing too early and leaving me with dark pictures. After a failed reset I visited the apple store, where they told me it was a known problem and apple were working on a update to fix the issue and it was just a
    waiting game. Once the update was available I did it immediately and the problem seemed to be fixed. I've now noticed that from the camera roll I carnt send a picture to mms. It gives me the option but the screen completely freezes after I've chosen it. The only way to access my camera roll again is to completely close the camera roll down and reopen it. The strange thing it it will let me send it as an email and upload taught to Facebook etc just not as an mms. The other strange thing is if I go to msgs and add a photo I'm successful but if I try to edit the photo I want to send 1st then I get the same issue as the camera roll. I also have issues with the shutter taking ages to open. Is anyone else havin these issue before I go back to the apple shop. A complete reset hasn't worked

    Photo Stream only handles images and your videos are not uploaded or shared with other devices.
    Use iPhoto to import from your device. It can bring in the videos and image files.

  • I can't find the result of my scan...no matter how/where i save it...what am i doing wrong?

    i've followed the instructions i found on my mac and in the forum however, every time i scan a doc (i see evidence of it in the scanner menu) it never shows up how/where i believe i've saved it.  i have scanned a document with the standard settings to my desktop in PDF format but it never shows up on my desktop or in any search function in my documents.  thanks for any helpful advice you may provide.
    iMac (21.5-inch Mid 2010), OS X Mavericks (10.9.5), hp deskjet f4180

    Hi,
    What application are you scanning from?
    Try installing the HP Easy Scan app, scan and save the scan to any required location.
    May you see any difference then?
    You may install the HP Easy Scan from the following link, it will be added to your Applications folder:
    https://itunes.apple.com/us/app/hp-easy-scan/id967004861?mt=12
    Please let me know if that may help,
    Shlomi

  • HT1414 I have Windows and I am trying to download stuff like pictures and music from my laptop, but it's not letting me. What am I doing wrong?

    I am currently try to download music from Rhapsody to my daughter Ipod Touch 4th Generation. I have made the Apple ID: and went through the whole thing, but once the Ipod is plugged into my computer it doesn't show up in my media. What am I doing wrong?

    You have to import the music into your iTunes library and then sync it to your iPod
    iTunes 11 for Windows: Syncing overview
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    iOS and iPod: Syncing photos using iTunes

  • I can't get Firefox to even attempt to download. What am I doing wrong?

    When I try to download Firefox, nothing happens. Even when I click the "click here if screen doesn't pop up" and even after I "click here" nothing happens. I am not sure what I am doing wrong or/and why it doesn't work.

    Follow step 1 to 6 closely to recover your iPad.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times

  • B size) to mail or thumb drive the file is exported to about 560 KB not the original 5.6 MB, what am I doing wrong? thanks

    Currently using Aperture ver 3.1.1, when exporting files (5.6 MB size) to email or to thumb drive the file received by email recipent is about 560KB and worthless in size to them.  What am I doing wrong?  thanks
    Hutch

    I think, what Kirby meant, is this:
    When you are exporting your images with "File > Share < Email", you should see a pop up menu in the upper right corner of the window that lets you chose the file size:
    What are your settings there? You should pick "Actual size", if the Mail server will let you send 5 MB files. Quite often the limit is 2 or 3 MB.
    Is "Mail.app" the Mils client you are usimng, or are using a different mailer?

  • I received an itunes store gift certificate. When I try to redeem it, the screen says Session Timeout.  I have entered and reentered the certificate code, but Session Timeout comes up each time.  What am I doing wrong?

    I received an iTunes gift certificate for Christmas.  When I try to redeem it, a window comes up saying "Session Timeout."  I have signed out, signed back in, tried again, and when I enter the code and press Redeem, the "Session Timeout--Your session has timed out.  Try again." message pops up.  What am I doing wrong?

    Clic here:  iTunes: Advanced iTunes Store troubleshooting
    Then click:  Expand All Sections
    Then scroll down to error 5002.

  • Cannot get migration assistant working from PowerBook to MacBook Air - what am I doing wrong?

    Hello out there,
    I am proud possessor of a new MacBook Air with Mac OS X 10.7. Up to now, I used a PowerBook with Mac OX X 10.4.11. Although the two macs - old and new one - are connected via the same WLAN network, I cannot get the migration assistant going. The two cannot find each other, although they are only 5 centimetres apart....what am I doing wrong? Do I need an update for the PowerBook? And if yes, which one? Or should I give up?
    Thank you so much for your help, greetings from sunny Munich, Evelyn

    Have a read here http://support.apple.com/kb/HT4818.
    Maybe you need this update for 10.4.11 http://support.apple.com/kb/HT3174
    You should also read this Basic Guide https://discussions.apple.com/docs/DOC-2295 from one of local Gurus.
    Stefan

  • Can I move photos from Google to the Camera Roll on my iPad?

    Just bought my first iPad, I would like to import photos from Google+ and put them into albums and the camera roll...is this possible?

    If you are using the Google+ App, you just need to tap on the settings "cog" icon at the top left corner of the opened pciture, and then tap on download.
    This will put the image in your camera roll.

  • What am I doing wrong? Please I need your HELP!

    Hi.  I am currently writing a program to measure temperature by converting voltages into Kelvins, and here is my set up:
    I have my thermocouple wires (type K) connected to the Omega cold junction compensator which is connected directly to the Data Acquisition card (ai-2 and ai-ground).  In my DAQ Assist. (Analog input as voltage), I have my min set at -10 volts and my max set at 10 volts, collecting about 100 sample at 1000 (Hz).  The output of this is then connected to the converting thermocouple reading.vi with settings as below:
    Temperature unit: Kelvin and Type: K.  The results that I got was about 273 Kelvins (this was measure at room temperature).  What am I doing wrong?
    I also tried another method. I have my thermocouple wires (type K) connected to the Omega cold junction compensator which is connected directly to the Data Acquisition card (ai-2 and ai-ground).  In my DAQ Assist. (Analog input as Temperature: Thermocouple).  I set the temperature range from -270 degree Cels. to 1372 degree Cels., type K, and I also tried setting the CJC constant at 0, 23, and 25 but everytime the temperature turns out to be about 3372 degree Cel. What am I doing wrong here?

    A typical cold junction compensator just adds a cold junction reference. Your voltages are still thermoelectric voltages of a few millivolts. +- 10V is probably way too insensitive.
    LabVIEW Champion . Do more with less code and in less time .

  • TS3899 I am trying to pull up an old email that I received and placed in the trash.  When I press "load more messages," the older messages do not pop up.  What am I doing wrong?

    I am trying to pull up an old email that I received and placed in the trash.  When I press "load more messages," no additional trash eMails pop up.  What am I doing wrong?

    You're not looking in your trash can.  And if you've emptied your trash can, the message is gone.
    To open your trash, you have inboxes on the top, and accounts below.  Tap the mail from the accounts.  That's where your trash can is.  Tap it.  If the mail is not permanently deleted it will be in the trash.

Maybe you are looking for

  • When to call DocumentInstance.refresh()

    I have a jsp page that takes URL encoded prompt name/value pairs, opens reports, fills in the prompts from the name/value pairs, refreshes the reports, and returns the results as a PDF file.  It needs to be able to handle Web Intelligence reports and

  • Error in MIRO posting for credit memo in return PO

    Dear Sir,          I have made a return PO for Vendor rejection.Then made a good return for the same with 161.Then post the excise return through JV J1IS. But when I am posting the Credit Memo for vendor system showing the Error - RG23D Part 2 has no

  • How to batch create SSO accounts from Windows or a PL/SQL script

    We have just converted our 6i Forms and Reports to 10g (10.1.2.0.2), and run them against a 9i database. In order to be able to securely run reports we set up and configured SSO for a few accounts via the Oracle Identity Management Provisioning Conso

  • Best approrach for authorization clean up in GRC implemetation project

    we are implementing GRC AC 5.3, our basis people have created initial connections. we have 2system GRC landscape connecting to 3system ECC landscape where GRC Dev is connecting to ECC DEV, QA & GRC Prod is connecting to ECC prod. Now my question is w

  • Massive Price Update in Schedulig Agreements

    Hi all, I need a method/transaction to make a massive update of prices in scheduling agreemmets ( as I do for ex. in T. VA32 with the button "Update"). Have you any suggestion? Thanks in advance, Flavio