Sharing multiple user accounts to AppleTV on one Mac

I can't remember if I did this before with software 1.0/1.1, but I'm sure the possibility of having two concurrently active iTunes libraries on a single machine has been discussed as one way of separating out content.
To do some more testing on software 2.00 + libraries I have just created a new user account with a new iTunes library, and registered it as a shared AppleTV library on AppleTV 2 running 2.01 (I've not updated to 2.02 yet for a reason).
So imagine this setup:
Single iMac.
User Account A - called iMac - the main sync/share library.
User Account B - called Test - the sharing library.
Both Users iTunes apps open (switching between users obviously without logging out).
AppleTV listed under devices in both iTunes instances.
Both iMac and Test libraries solid white in 'Computers' setting on AppleTV.
Can play iMac content logged into User account A having switched from B.
I select My Shared Music - long wait - says it's not connected to shared Test library, and checking Computers 'Test' is now greyed out.
Switching to user B the AppleTv is still listed under Devices. I still cannot connect to My Shared Music and 'Test' Library remains greyed out. I can still while logged into B play the sync/share content of User A - I had expected I would be able to do the converse.
Both iTunes libraries show the other library under shared libraries in iTunes.
This is baffling me.
Rebooted etc etc etc.
iTunes can see the shared library of the other user account but AppleTV can't.
AC

Winston Churchill wrote:
Just to be clear, are you saying you can't connect to the test library regardless of which user account you have active.
That's right.
The main sync/stream library content is available on AppleTV regardless of which account I'm logged into on the iMac. I have nothing at all synced so know that I'm seeing the "main" iMac library streaming.
Both libraries show up as shared libraries in the other's iTunes shares, and I can load the 'test' library under the other account iTunes instance and play music back which proves to me that the other account isn't dormant.
I've just updated iTunes as I hadn't done the last update but no difference.
Am now updating AppleTv to 2.02, I just hope that that doesn't disable simultaneous audio via optical and HDMI.
AC

Similar Messages

Can multiple iphones with multiple itunes accounts be synced to one mac keeping apps seperate over the air?

We have about 20 iPhone's in our environment and syncing and updating them has become a real chore lately. Everyone has their own iTunes account and apps that they use. Is there a way that they can be synced, backed up and updated over the air (not iCloud) to the same MAC? Because we are in the financial sector we will not be able to use iCloud. Should we look into some sort of private cloud and if so; any suggestions on how to accomplish it would be greatly appreciated.
Thank you in advance,
J

We have several macs, several ipods, a couple of iphones, several itunes store accounts. So far no problem. You might have to share passwords if you want to share content. I think iStore accounts can only be used on up to 5 computers. We have 7, so have to be a little careful about that. I don't think there is a limit on how many iDevices can be used with one account. I also don't think there is a limit on how many accounts can be used on a single computer (might be wrong about that). You have to be logged into the iStore to download content, and your computer has to be registered with the account to use the content, but once it is on, and registered, syncing to an iPod is not a problem (you do not have to login in again for each account the content was purchased from). I'm just glad I only have two kids, and one wife - things could get trickier in a big family with . . .

File sharing across multiple user accounts on the same machine

Hello,
I try to figure out how multiple users (my wife and I) on the same mac can have equal access to files on the local drive without granting that access to all users on that machine or even the rest of the world.
My research sofar hasn't come up with a satisfying solution. Here are the solutions that I am looking at:
1. Enable a permission system that ensures access to both users in all cases (file/directory creation, copy and move).
I only found a suitable solution for creating and copying files/directories but not for moving them.
See the following articles for reference:
https://discussions.apple.com/message/20787617#20787617 Setting up a shared structure that works e.g. for iPhoto Library but not for moving files to and from
https://discussions.apple.com/message/4005647#4005647 Helpful information on POSIX Permissions, ACL's an Permission inheritance
This would be my first choice if I can get around the problem of moving files...
2. Disk Image
Create a disk image which ignores persmissions and set permissions for the file that contains the image instead.
Read this article to get further details: http://support.apple.com/kb/HT1198
This solution will work but has a few disadvatages:
There's no mutual access from multiple user accounts since an image may only be mounted by one user at a time.
One has to create a startup script that mounts the image upon login which would create a first come first serve for access to the image content.
3. Using a file sharing protocol (e.g. afp or smb) locally.
The idea behind it is to have a server providing the files mutually to multiple users one the same machine. At them moment this seems to be the most promising approach to me.
Unfortunately I can get acces from another machine but not from the same machine. Has anyone ever tried to access the file sharing (afp or smb) from the same machine on which the server is located?
Has anyone got some helpful hints for me?
Thanks in advance.

Sorry, but you didn't specify details, and it was worth checking whether or not you had overlooked this approach.
The problem you're having (as I suppose you already know) is that any new disk item inherits the permissions of the folder it is originally created in in. These permissions (sensibly enough) need owner or administrator permission to change once they've been established; that will happen when you copy a file to a new location (because that's essentially creating a new file) but not when you move it. any of the following would work:
changing the permissions on newly created files for both users so that they all explicitly give r/w access to a particular group.
writing a droplet that would change the permissions of files dropped on it and move them programmatically to the shared folder
set up a folder action or launchd job that would watch the shared folder and automatically convert permissions on files placed in it.
The last would be the approach I would take, but... which appeals to you?

Sharing an iTunes Library across multiple user account and a network.

Sharing an iTunes Music Library across multiple user accounts.
Hello Everybody!
Firstly, this was designed to be run in Mac OS X 10.4 Tiger. It will not work with earlier versions of Mac OS X! Sorry.
Here's a handy tip for keeping your hard drive neat and tidy, it also saves space, what in effect will be done is an iTunes music library will be shared amongst multiple users on the same machine. There are advantages and disadvantages to using this method.
• Firstly I think it might be worthwhile to state the advantages and disadvantages to using this approach.
The advantages include:
- Space will be saved, as no duplicate files will occur.
- The administrator will be able to have complete control over the content of the iTunes library, this may be useful for restricting the content of the Library; particularly for example if computer is being used at and education institution, business or any other sort of institution where things such as explicit content would be less favorable.
- The machine will not be slowed by the fact that every user has lots of files.
The disadvantages to this system include.
- The fact that the account storing the music will have to be logged in, and iTunes will have to be active in that account.
- If the account housing the music is not active then nobody can use the iTunes library.
- There is a certain degree of risk present when an administrator account must be continually active.
- Fast User Switching must be enabled.
Overview:
A central account controls all music on the machine/network, this is achieved by storing iTunes files in a public location as opposed to in the user's directory. In effect the system will give all users across the machine/network access to the same music/files without the possibility of files 'doubling up' because two different users like the same types of music. This approach saves valuable disk space in this regard and may therefore prove to be useful in some situations.
This is a hearty process to undertake, so only follow this tutorial if you're willing to go all the way to the end of it.
Process:
Step 1:
Firstly, we need to organize the host library, I tidied mine up, removing excess playlists, random files, things like that. this will make thing a bit easier in the later stages of this process.
Once the library is tidied up, move the entire "iTunes" folder from your Home directory to the "//localhost" directory (The Macintosh HD) and ensure that files are on the same level as the "Applications", "Users", "Library" and "System" directories; this will ensure that the files in the library are available to all users on the machine (this also works for networks)
Optionally you can set the ownership of the folder to the 'administrator' account (the user who will be hosting the library.), you may also like to set the permissions of 'you can' to "Read & Write" (assuming that you are doing this through the user who will host the library); secondly you should set the "Owner" to the administrator who will be hosting the library and set their "access" to "Read & Write" (this will ensure that the administrator has full access to the folder). The final part of this step involves setting access for the "Others" tab to "Read Only" this will ensure that the other users can view but not modify the contents on the folder.
Overview:
So far we have done the following steps:
1. Organized the host library.
2. Placed the iTunes directory into a 'public' directory so that other users may use it. (this step is essential if you plan on sharing the library across multiple accounts on the same machine. NOTE: this step is only necessary if you are wanting to share you library across multiple accounts on the same machine, if you simply want to share the music across a network, use the iTunes sharing facility.
3. set ownership and permissions for the iTunes music folder.
Step 2:
Currently the administrator is the only user who can use this library, however we will address this soon. In this step we will enable iTunes music sharing in the administrator's account, this will enable other users to access the files in the library.
If you are not logged in as the administrator, do so; secondly, open iTunes and select "Preferences" from the "iTunes" menu, now click the "Sharing" tab, if "share my library on my local network" is not checked, the radio buttons below this will now become active, you may choose to share the entire libraries contents, or share only selected content.
Sharing only selected content may be useful if their is explicit content in the library and minors use the network or machine that the library is connected to.
If you have selected "share entire library" go to Step 3, if you have selected share "share selected playlists" read on.
After clicking "share selected playlists" you must then select the playlists that you intend to share across your accounts and network. Once you have finished selecting the playlists, click "OK" to save the settings.
Overview:
In this step we:
1. Enabled iTunes sharing in the administrator's account, now, users on the local network may access the iTunes library, however, users on the same machine may not.
Step 3:
Now we will enable users on the same machine to access the library on the machine. This is achieved by logging in as each user, opening iTunes, opening iTunes preferences, and clicking "look for shared music". now all users on the machine may also access the library that the administrator controls.
This in effect will mean that the user will not need to use their user library, it will be provided to them via a pseudo network connection.
As a secondary measure, I have chosen to write a generic login script that will move any content from the user's "Music/iTunes/iTunes Music" directory to the trash and then empties the user's trash.
This is done through the use of an Automator Application: this application does the following actions.
1. Uses the "Finder" action "Get Specified Finder Items"
1a. The user's "~/Music/iTunes/iTunes Music" folder
2. Uses the "Finder" action "Get Folder Contents"
3. Uses the "Finder" action "Move to Trash"
4. Uses the "Automator" action "Run AppleScript"
4a. with the following:
on run {input, parameters}
tell application "Finder"
empty trash
end tell
return input
end run
IMPORTANT: Once the script is adapted to the user account it must be set as a login item. in order to keep the script out of the way i have placed it in the user's "Library" directory, in "Application Support" under "iTunes".
Overview:
Here we:
1. Enabled iTunes sharing in the user accounts on the host machine, in effect allowing all users of the machine to view a single iTunes library.
2. (Optional) I have created a login application that will remove any content that has been added to user iTunes libraries, this in effect stops other users of the machine from adding music and files to iTunes.
Step 4:
If it is not already enabled, open system preferences and enable Fast User Switching in Accounts Options.
Summary:
We have shared a single iTunes library across multiple user account, while still allowing for network sharing. This method is designed to save space on machines, particularly those with smaller hard drives.
I hope that this hint proves to be helpful and I hope everybody will give me feedback on my process.
regards,
Pete.
iBook G4; 60GB Hard Drive, 512MB RAM, Airport Extreme Mac OS X (10.4.6) iWork & iLife '06, Adobe CS2, Final Cut Pro. Anything and Everything!!!

how to share music between different accounts on a single computer

Can you set up multiple user accounts on one laptop?

can you set up multiple user accounts on one laptop?

Of course.
And instructions can depend on which OS X is installed.
For v10.7 Lion > OS X Lion: Create a new user account
For v10.8 Mountain Lion > OS X Mountain Lion: Create a new user account
When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu 

Multiple user accounts on one ipad possible

Is it possible to have multiple user accounts on one single ipad. Like one admit account, one for the Kids and one for mom and dad?
Thanks!
Josef

iOS: Understanding Restrictions (parental controls)

Multiple websites on multiple user accounts. Want all websites in one user

I have multiple websites in multiple user accounts. At the time I started this way iWeb 08' didn't allow more then one website per user.
I now have three limited user accounts with three iweb sites. One in each account. I'd like to move two of them to the main user account and have all three available to me in the user account I call mine. Is this possible with iWeb 09'? i can, by hand, recreate them in the main account, but I'd like an easier solution.
I am hoping it is possible to combine the files from each "Domain.sites" and make one magical come together with each site in place.
Thanks Everyone

Move all of the Domain.sites2 files to one user account and rename them to represent the site inside, i.e. Myfirstsite.sites2, Mysecondsite.sites2, etc. Put them all in your User/Library/Application Support/iWeb folder.
Using the application suggested by Wyodor merge the sites into a new domain file. You can only merge 2 sites at a time so you'll have to do 2, then select that new one and merge with a 3rd file, etc.
Click to view full size
New domain files are created by the merge process so your original domain files will be untouched.
OR, you can leave the domain files as they are, named individually, and use iWebSites to choose and open the site you want to work on and publish. I manage multiple sites with iWebSites:
This way the domain files loads more quickly and if there's a problem only one site is affected.
OT
Click to view full size

Login with Multiple User Accounts From One Machine

We have users with multiple accounts (Admin and Standard) in our organization and we want them to be able to launch RemoteApps from RDWeb using both accounts at the same time (from a single workstation). For example we would want their standard account
to launch the RemoteApp HEAT and their admin account to launch the RemoteApp Exchange Management Console. Is this possible?

Thanks for the suggestion, but I'm not talking about concurrent sessions for a single user - I'm talking about multiple user accounts being used from an individual machine at the same time. The situation would be as follows:
I log on to the computer with my normal user account (lets call it NZiehnert)
I launch an application from the RemoteApp and Desktop Connections shortcut in my start menu, which launches the application as NZiehnert
I launch the RDWeb access portal and log on using a different account (lets call it NZiehnert.admin)
I attempt to launch the same application from step 2 (or another application that runs from the same server) and instead of launching as NZiehnert.admin the application runs as NZiehnert
Basically, we have administrative tools that we wish to put into our remote environment, but we also have tools that are used by the same users normal accounts. So we need a way for those users to be able to access the applications as a different user
- at one point I was able to generate this dialog, but I'm not sure how to recreate it:

1 Apple TV 2nd Gen, Windows 7 Computer with multiple user accounts

The issue that I am having is I have 1 Apple TV 2nd Gen and Windows 7 Computer with multiple user accounts.
When I log onto my Windows user account, open up Itunes and turn on home sharing my Apple TV work perfect but if another family member switches to their Windows user account without logging me out, the home share shows up on Apple TV but it just says "Loading ... Library" and never loads.
If we switch back to my user account, restart iTunes, everything is fine. Is there a way to keep my home share active in ATV2 across multiple user accounts? All of my video is under my account.

You can home-share multiple libraries but only use one account at a time.

Migrate itunes from pc to mac with multiple user accounts

I've read the numerous articles on transferring one's itunes library from a windows machine to a mac and I *think* I've got the details sorted (have itunes copy everything and then organize my library, then copy whole folder to external drive). I only have one itunes account but it my full library and itunes account is used across different windows user accounts.
My mac is setup with multiple user accounts and I'd like to have a single library and single itunes account (same apps, etc.,). I'm not quite sure how to migrate the library from windows and then set it up on the mac such that all mac user accounts are sharing the same library and itunes account. Any guidance?
Forgot to mention, have 2 iphones and 1 ipad as well, all attached to the same apple id.

See these support documents:
How to share iTunes between multiple accounts on a single computer: http://support.apple.com/kb/HT1203
How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495

Having trouble with multiple user accounts

I am still getting used to Aperture and am having trouble with multiple user accounts on my Mac.
My wife and I have separate accounts on our Mac, and both have Administrator rights. We keep our Aperture library in the "Shared" folder, and I have made sure that both she and I have read/write capabilities on the Aperture library.
However, she has difficulty creating new projects, saving data, and viewing thumbnails in Aperture. Whenever she creates a project, it does not save into Aperture, and cannot be viewed by any user. In addition, changes she makes to photos do not save. She also cannot view thumbnails of any photos (although she can see the photos in the viewer).
Are there any changes I need to make to the user accounts so she can have all these capabilities?
Many Thanks.

Rather than having the Aperture library reside in the shared folder, keep it within a folder residing at the top level of your mac, eg.
I actually keep mine on one of my RAID disks.
Tony

Problem with iTunes and multiple user accounts in Windows

I am running iTunes on a PC (Windows XP) and have multiple user accounts. When I switch between user accounts and try to open iTunes, I get a message that tells me I can't open the program because another user is using it. Is it really true that I can only have iTunes open in one user account at a time on a PC with multiple user accounts ?!? If not, what am I doing wrong?

You are right, can only have one open. You have to log out of a user before logging in to another user to use iTunes. Do not use the fast user switching ability of Windows.

New Mac User: iTunes Auth with multiple user accounts

With a Mac with multiple user accounts, does EACH user account need to have iTunes authorized, or is iTunes authorized for an entire mac machine?

So then I assume that iTunes will know then if each of the computer's user accounts has a different iTunes account?
When you authorize an iTunes account on your computer, the authorization info is stored in \Users\Shared\. When you run iTunes, it looks there to see if it can play purchases. The purchase account info is embedded into each purchased file.

Is there any information about using iCloud on a Mac with multiple user accounts (Mountain Lion)

When upgrading to Mountain Lion, you are asked to sign in using your iCloud ID. I don't understand how to set up the proper synching of "stuff" if your Mac has multiple user accounts, and they each have their own iCloud ID.
The whole issue of supporting multiple users on a Mac and making everything easy to understand with regard to iTunes and iCloud is, in my opinion, currently in a state of disaster. Apple needs to address this. They have conveniently made it a non-issue on iPads by not allowing multiple users. I can tell you that as one of the resident iOS and Apple experts in my office, most of the questions I get from others (not work-related) are on this topic. It needs to be easier to understand and accomplish.
Thanks in advance for any information you have on this subject.

CS7981 wrote:
is "Is there any benefit to using my Airport Express with my wireless router
no.

How can i set up multiple user accounts for my new ipad mini?

How can i set up multiple user accounts for my new ipad mini?

The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

Sharing multiple user accounts to AppleTV on one Mac

Similar Messages

Maybe you are looking for