Sharing my library between Mac and PC.

Problem: iTunes (Mac) will not find shared music on iTunes (PC).
I have recently allowed my iTunes library on my PC to share my music over the local network. My PC is connected to the network by Ethernet cable attached to a wireless router.
My mac, however, is connected to the wireless network also coming from the router, but it has not found any shared music at all.
After I enabled the sharing on my PC, I almost immediately logged out of it, but it was still on and connected to the network.
I have not created any advanced settings on my PC (maybe I should have?), but it remains connected to the network (and the internet) through the Ethernet cable.
Any ideas?

check out these links:
Troubleshooting security software issues
Troubleshooting Home Sharing
and, last but not least, see this discussion concerning bonjour being the culprit.

Similar Messages

Sharing iTunes Library between Mac and PC

Hello
I have a Windows PC at home and had a Dell laptop. I have my itunes library on an external hard drive. This worked perfectly since which ever machine I was on I had access to the same library. Recently my work upgraded my laptop to a Mac Book Pro with Snow Leopard. Is there a way to share this same library on my Mac? I am new to the Mac world and am a bit lost. Thanks in advance

I have a similar setup. You need to move your itunes library to your network storage device. You need to do this within itunes (you will have to google moving your itunes library because I don't remember all the steps). After you moved the itunes library to a network share, you need to go into advanced preferences on each computer that will access the library and set the location of the itune library to point to the network share folder where the file itunes library.itl is located - the exit from Itunes. Restart Itunes on each computer (pressing shift on the Windows computers and option on the Macs). You will then have to choose the Itunes library. Browse to the network share and click on the itunes library.itl folder.
Three notes. Only one computer at a time can access the library. Second, each time you switch back and forth between mac and pc, the library folder needs to be updated. Third, for some reason, with iTunes 9.0.2, the updating process has slowed down. It is especially slow taking 15 minutes or so for a 13GB library. Hope apple fixes this.

My home sharing continually fails between mac and apple tv 2.

my home sharing continually fails between mac and apple tv 2, even during watching a movie. I go to the mac to re-turn on home sharing but it is still on. Any tips? I also have to turn off and back on at the mac every time i switch on my apple tv.

Sharing Stopped working again over night.
I went to Apple Support Artical TS2972
As soon as I did this Home Sharing started working
http://support.apple.com/kb/TS2972
Firewall Section
5. Check Firewall Settings
If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
Block all incoming connections
Allow only essential services
If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
It made sense to me, but its still puzzling me after restarting a router would (in my first attempt) resolve the issue for a day. This this time I applied the port forwarding TCP and UDP ports and saved the settings in the DLink DIR-655 and both my iPad2 and iPhone 3GS were now again finding the share. My ATV2 is also now accepting the Share.
Tommorrow will be the true test.

Sharing linked files between mac and pc

Dear Community and AI Support,
My team is trying to share AI files between Macs and PCs. That works fine until we have Linked assets. Once we have linked assets, AI either forgets to, or is unable to, let us relink more than one of the linked files. We can't edit the links or even delete them. The linked files are just ignored, leaving the file half empty.
We've tried hacking the paths directly in the .AI file, hoping to eventually write a perl script to help us switch back and forth. but no luck. We assume there is a checksum or crc code or hash, etc..., as AI won't even try to open the file after that.
But to clarify the issue. here is an example of the Mac and PC links we need to switch between using an excerpt from the AI file. These are valid, working directories on both platforms.
Mac flavor:
               <rdf:li rdf:parseType="Resource">
                  <stMfs:linkForm>EmbedByReference</stMfs:linkForm>
                  <stMfs:reference rdf:parseType="Resource">
                     <stRef:filePath>/T/source/stories/00002/characters/puppy.ai</stRef:filePath>
                     <stRef:documentID>xmp.did:5bbaeed4-f8e3-f54b-b302-0b9d14f5a0eb</stRef:documentID>
                     <stRef:instanceID>uuid:1f66816c-99cb-4d62-ab88-aa6f9c92adad</stRef:instanceID>
                  </stMfs:reference>
               </rdf:li>
Win flavor:
               <rdf:li rdf:parseType="Resource">
                  <stMfs:linkForm>EmbedByReference</stMfs:linkForm>
                  <stMfs:reference rdf:parseType="Resource">
                     <stRef:filePath>T:\source\stories\00002\characters\puppy.ai</stRef:filePath>
                     <stRef:documentID>xmp.did:5bbaeed4-f8e3-f54b-b302-0b9d14f5a0eb</stRef:documentID>
                     <stRef:instanceID>uuid:1f66816c-99cb-4d62-ab88-aa6f9c92adad</stRef:instanceID>
                  </stMfs:reference>
               </rdf:li>
Thanks! :]
Chris

ooohhhhh very interesting. I did a find and replace on all the strings, but no dice. I didn't think to look at those types of data. But now that you have mentioned it, perhaps I'll do a diff on the same file saved on both platforms to see what has been changed. Should have already thought of it, but your note has made me check my assumptions.

Itunes Shared Library between Mac and Windows isn't sharing videos properly

Hi, I'm a bit new to the mac world, but I'm the proud owner of a new macmini. I also own a Windows 7 machine.
My problem is with the Itunes Shared library. Itunes 10 on my mac is set up to share everything, including podcasts. I can see these from Itunes 10 on Windows, and I can play music (and audio podcasts), but video is hit or miss.
Videos downloaded from Itunes U tend to work, lectures and stuff.
Video podcasts (also downloaded from Itunes Store) and other videos don't work at all. Itunes just doesn't play the video, and doesn't even launch the "black screen". The timer remains at 0.00.
On the other hand, sharing videos from the PC to Mac works well, i.e. my mac can see the contents of the itunes shared library on Windows and play videos. It just doesn't work the other way around.
Thanks for reading and I hope this problem can be fixed.

Woops!
Here you go:
http://discussions.info.apple.com/message.jspa?messageID=10923818

Sharing .itl file between Mac and Windows

How do I share an .itl file located on a NAS between a Windows machine and a Mac? I can do it with two Windows machines, but one I add a Mac, every time I switch platforms the library rebuilds. Onle one machine is accessing the itl file at a time, all the content is on the NAS, and I have 11.0.2.25 on the Mac and 11.0.2.26 on the Windows machine (can't get 11.0.2.25 on the Windows machine.

Right now, I have Verizon DSL that uses a Westell router. It has 4 ethernet ports on the back in addition to the DSL connections. I have a HP Pavilion with Windows XP in the basement, an iMac G3 in my room, and an intel iMac in our living room all connected to the router by ethernet cables. Each computer is able to access the other computer's files. On the intel iMac I have Microsoft Remote Desktop installed so that I can log into the HP in the basement and control it from the iMac. I haven't tried operating this network wirelessly, but I would imagine that it would be possible. One thing that you might want to check is the router's configuration. My router has settings that either allow or block wireless signals. To access my router's settings I type in 192.168.1.1 in Safari or Internet Explorer. Having all 3 computers on the internet at the same time does not slow the speed of the DSL very much.
I hope this information will help.
20" iMac Intel Core 2 Duo 2.16 GHz Mac OS X (10.4.8) 250GB HD, 128 MB X1600 Graphics, 1 GB DDR2, DVD+-RW

Home sharing not working between mac and pc, but it is fine between mac and mac. Help!!!

Good Evening Dear Gurus,
Hi, I am writing this to ask for help regarding home sharing. Yes I do know they are several threads out there that already explains or rather given solution on how to tackle this problem. BUT the my problem is rather different. I am no computer expert myself, so here is the problem, apparently MY MAC can home share with another MAC, but both of this MAC cannot home share with the PC.
Does anyone encounter this kind of problem before? Can anyone help a poor guy out? Thanks in advance. love to hear from the community soon!
Thanks!

Sharing Stopped working again over night.
I went to Apple Support Artical TS2972
As soon as I did this Home Sharing started working
http://support.apple.com/kb/TS2972
Firewall Section
5. Check Firewall Settings
If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
Block all incoming connections
Allow only essential services
If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
It made sense to me, but its still puzzling me after restarting a router would (in my first attempt) resolve the issue for a day. This this time I applied the port forwarding TCP and UDP ports and saved the settings in the DLink DIR-655 and both my iPad2 and iPhone 3GS were now again finding the share. My ATV2 is also now accepting the Share.
Tommorrow will be the true test.

Sharing a printer between mac and pc

I an trying to help my sister share her printer with both her new iMac running Snow Leopard and her old PC running XP. The PC is connected directly to an Airport Extreme Base Station (AEBS) because it has no wifi and her iMac is connected using the wifi. The printer is connected directly to the iMac with a USB cable. I have printer sharing turned on under system preferences on the Mac but I don't know how to find it once I get on the PC.
Can anyone help?
Thanks in advance

Make sure that the Mac and the PC are both members of the same Workgroup or they won't see each other.

Is it possible to share iTunes Library between Mac and PC?

My wife has a HUGE collection of audio and videos, mainly recordings of workshops she's involved with. Total size is many hundreds of MB, too much for her laptop.
If we create a new library on a large external HD (formatted for PC), should she be able to access the same library with either her Mac or her office PC? Or are they different file structures?
Thanks,
Mark

wrong info removed.
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Sharing Internet Connection between Mac and Windows

Hi there!
I have a Windows Desktop and a Macbook 13". Am I able to share the Internet between them?
My Mac has Airport to connect wirelessly. So does my PC, except this Wireless connection always fails. I have re-installed the software and so on, but it still is failing.
What I would like to do is to have my PC connect to my Mac (preferably wirelessly, but I will use an Ethernet cable if I have to!) and then use the Wireless Internet connection. Is this possible, or am I just dreaming?
Help with this would be greatly appreciated!
James
Macbook 13" Intel Core 2 Duo Mac OS X (10.4.8) 2.0 Ghz and a Superdrive!

Right now, I have Verizon DSL that uses a Westell router. It has 4 ethernet ports on the back in addition to the DSL connections. I have a HP Pavilion with Windows XP in the basement, an iMac G3 in my room, and an intel iMac in our living room all connected to the router by ethernet cables. Each computer is able to access the other computer's files. On the intel iMac I have Microsoft Remote Desktop installed so that I can log into the HP in the basement and control it from the iMac. I haven't tried operating this network wirelessly, but I would imagine that it would be possible. One thing that you might want to check is the router's configuration. My router has settings that either allow or block wireless signals. To access my router's settings I type in 192.168.1.1 in Safari or Internet Explorer. Having all 3 computers on the internet at the same time does not slow the speed of the DSL very much.
I hope this information will help.
20" iMac Intel Core 2 Duo 2.16 GHz Mac OS X (10.4.8) 250GB HD, 128 MB X1600 Graphics, 1 GB DDR2, DVD+-RW

Any best practices sharing iPhoto library between iMac and MacBook Pro

I have my iPhoto library on my iMac, but I would also like to view and edit keywords, etc on my MacBook Pro.
Any suggestions on how to do this?

Larry
There are two ways to share, depending on what you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running. On the other machine enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Remember iPhoto must be running on both machies for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. then:
Quit iPhoto ion both machines.
Move the iPhoto Library Folder to an external HD set to ignore permissions
On each machine in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both machines will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
Regards
TD

Common URL format for sharing file paths between Mac and Windows?

Hi -
I have to integrate several Macs into a Windows environment. We need to be able to copy and paste file paths to share between all machines. Is there a common URL format that can be used between the platforms?
On Windows, I have:
\\server\share\file
On the Mac:
smb://server/share/file
Thank you for your help,
Steve

On Windows you have what is known as a "UNC".
On the Mac, you have a "URL". It starts with the protocol to use "smb" then gives the path to the item using standard conventions.
UNC is Microsoft mainly.
The only way I know for Windows to use a URL is with an application like a web browser or ftp client.
On the Mac, you can use UNCs but they must be modified as follows.
In Terminal:
smbclient \\\\servername\\sharename\\filename -U username
And enter a password if prompted.
Notice that you must double up the slashes. This is due to how UNIX shells treat the backslash.
You will connect to the share, but it will only be in Terminal.

Sharing calendar editing between Mac and PC

I would like to share creating and editing of calendar events between my iphone, macbook and my secretary's PC. Is ICal and ICloud the way to go? and how do I do it? Mac NewB

ooohhhhh very interesting. I did a find and replace on all the strings, but no dice. I didn't think to look at those types of data. But now that you have mentioned it, perhaps I'll do a diff on the same file saved on both platforms to see what has been changed. Should have already thought of it, but your note has made me check my assumptions.

ITunes 7 - syncing between Mac and PC using network

I thought there was an announcement today that Apple had made it easier to copy your iTunes library between Mac and PC with or without using an iPod.
I have not been able to find such an option in the iTunes 7 menus on my mac or pc. I could copy the library using standard network file copy, but then I would lose the playlists and settings.
Anybody know the new way to copy/sync a mac and pc itunes library while keeping playlists and settings?
Intel iMac 20" stock mem & drive Mac OS X (10.4.6) OS & apps are excellent; hardware could use some QA

Welcome to Apple Discussions, saucyandbossy
If your family uses Windows® and has or will add the latest version of AIM® to their PC, launch iChat on your Mac, add their buddy name(s) (AIM Screen Name) to your iChat Buddy List, and contact them like you would any other iChat contact. If you need help adding buddy names, search your Mac's iChat > Help for "Adding people to the buddy list" (without the quotation marks).
If your family has problems setting up or using AIM®, or if they choose not to use it, both you and your family can download and install your respective versions of Skype and use Skype as your cross-platform video chat application. Skype offers comprehensive help at their website, including a dedicated Skype Forum. For those who have trouble connecting iChat and AM® (some do), Skype currently seems to offer the easiest to use, free, cross-platform video chat connections.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

ITunes sharing between Mac and PC is not working

iTunes sharing between Mac and PC is not working. No shared music appears.
PC = Win XP SP3; 192.168.1.101
iTunes for Windows 6.0.4.2
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on PC
Windows firewall has exceptions set to allow traffic on TCP 3689, UDP 5353
MAC = OS X 10.4.6; 192.168.1.100
iTunes for OS X 6.0.4(3)
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on Mac
System Preferences | Sharing | Services
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
System Preferences | Sharing | Firewall
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
iTunes Music Sharing - ON (i.e., TCP 3689 open)
iPhoto Bonjour Sharing - ON
Network Time - ON
ROUTER = Linksys BEFSR41v4; Firmware 1.04.01; 192.168.1.1
Functioning as DHCP server
File sharing between Mac & PC works OK
BUT iTUNES MUSIC SHARING DOES NOT WORK IN EITHER DIRECTION
Shared music is not visible
Tried turning both firewalls OFF -- still nothing
Tried installing Bonjour for Windows -- still nothing
ANY suggestions? Please help. Thanks.
1.8 GHz PowerPC G5 Mac OS X (10.4.6)

Hi cbafiero,
It seems that the problem lies in your router. I'm not sure exactly what the issue is (I've just now discovered it myself), but after switching from a Linksys WRT54GX2 to a thrift store Netgear, my shared libraries appeared instantly. My gut is telling me that the Linksys routers are blocking the multicast traffic, which is stupid on Linksys's part, to filter traffic internally. I'll look more into the Netgear and see what it has that the Linksys doesn't (or vice versa).

Sharing my library between Mac and PC.

Similar Messages

Maybe you are looking for