Sharing Printer from iMac

I have an HP PhotoSmart C4280 connect via USB to my iMac running OS 10.5.4.
I have shared this printer in the Sharing Panel of the iMac.
My PowerBook sees the printer & can select it, but when I go to print a document it says it is unable to connect to iMac port 621.. then times out.
I have updated all software & restarted.
Any other ideas?

i have this same problem. i have a "shared" printer (HP aio 5610) that worked before under OS x 10.5.4 and earlier. my host is a mac mini with USB to the HP 5610. i print from the mini or one of my two laptops that connect to the mini via Airport.
now i am using 10.5.5 and suddenly my other laptops (i have a mac book air and ibook) both cannot connect to the HP 5610. they can "see it" for sure but printing times out just like DanofSled says on port 630 with eventual timeout.
these laptops "share" the HP all-in-one via wireless airport extreme network. all worked fine before 10.5.5. only good for printing, no all-in-one functions though (known issue).
i have repaired permissions, reset printers on all macs, reinstalled HP software, installed HP driver pac, reinstalled 10.5.5 via download combo update, switched on and off the printer, used different USB, reset CUPS (a tip i came across but didnt work). i strongly suspect 10.5.5 broke the shared printing.
Satellites can see the HP 5610 everytime i reset the printers.
under system pref/ printers/default i CAN see the HP5610 and the correct location. BUT now it says "Print using: Generic PostScript Printer" as the actual HP driver is not on that laptop.... it can take a long long time (4 min) to allow you to add this printer, but once it does, the Printer shows up in "Print and Fax" under "System Preferences" just fine. as normal i "Add" the printer to the sattelite and theoretically it is now shared. But its not!
the host mac mini still works fine for printing and scanning.
however, now, under 10.5.5 the satellite laptops (airport) wont print. their own (satellite) print queue will accept the job, but it will eventually time out. the host mac-mini will never show the job on its own host print queue. clearly there is no connection.
NOTE: Under the satellites' print queue(s), you can select Printer/Network Diagnostics... and this shows an error at "server", the last light. the message says....
" Network Diagnostics was able to connect to the Internet, but not the server "HP Officejet 5600 series at XXX Mac mini.ipp.tcp.local". This could be caused by problems with the server or an Internet problem between the computer and server."
my printer is hooked as it always was. directly USB to the host Mac-mini, and "shared" via Airport to my two laptops.
anyone know what is up? reverting back to 10.5.X will be difficult

Similar Messages

Anyone know how to print from Win2K or WinXP to shared printer on iMac?

Help! Anyone know how to print from Win2K or WinXP to shared printer on iMac? I have a new IMac hosting a Canon iP4300, a pc running W2K & a pc running WXPsp2. All computers recognize each other and the iP4300 on the network and can share files. All Mac "Windows Sharing" & "Printer Sharing" preferences sre set correctly. Apple says the printer must be configured on the Windows computers as an SMB/CIFS network printer using a Postscript driver. I can find lots of pages on the net telling me I what needs to be done, but nothing stating how to do it. All the info I've found is either overly simplistic and or relates to the 10th dang of enterprise server administration. Would VERy much appreciate any help at all.
Victor

Please search the discussions before posting. This question has been asked many times before and you could save yourself time.
http://www.ifelix.co.uk/tech/3012.html

Shared printer from a pc does not show up on my printer list.

I have a macbook air and the shared printer from a pc does not show up on my printer list. I know it's available on the network as I have a another pc that has access to it. The Mac did find it at one time but it has since disappeared. Appreciate help.
Rich

Can you see the CD ripped songs in iTunes itself? Can you then right-click and select "Show in Windows Explorer"?

Can't print to Windows 7 shared printer from Mac OS Lion

Dear all,
I would like to share my experience battling to figure out how to print to Windows 7 shared printer from Mac OS Lion. Myself had this problem and looking throughly in internet without success. But finally I figured out the solution by myself, hope this can help other Mac user with similar problem.
OK, when I try to setup my new MacBook Pro with OS Lion to connect with my Canon MX308 printer attached to desktop with Windows 7 Ultimate,
1. I simply select System Preferences>Print & Scan.
2. Then looks for the + sign just below the box to add a new printer.
3. From the option toolbar above, I select Windows. I have connect this MacBook with my Windows Network, so the workgroup will appear to the left column.
4. After I select this group, the computer list will appear in the middle column
5. Then after I select the computer which my printer connected to, my printer sharename will appear in the right column
6. Last step is to select the printer I want to use.
7. After that it will automatically put your printer sharename to the "Name". And then I select my printer driver at "Print Using" and find my printer manufacturer which is Canon MX300 series from driver lists. Finish!
My printer appear in the Printers List. But the problem is everytime I try to print there will be error message saying "ON HOLD Authentication Required".
This problem start to kill me, I search all around for similar problem, but the solution was never worked for me!
Until just now I figured out accidentally for the solution.
THE PROBLEM LIES ON MY PRINTER DRIVER!!!! Although I have downloaded the most update driver from Apple site and Apple Software update said there is no more update for my system!
The solution for my problem is Gutenprint Printer Driver! You can download this driver at http://gimp-print.sourceforge.net/MacOSX.php, then select for the latest driver gutenprint-5.2.7.dmg. Install this driver!
Then back to Print & Scan in System Preferences, then right click on Printers List box, then choose "Reset Printing System..." to clear the previous failed printers.
After that, repeat the above step 2 - 7. Only for the last step I need to select the Printer Driver for my Canon MX308 for the driver name : "Canon PIXMA MX300 - CUPS+Gutenprint v5.2.7"
Now I can sleep as a baby knowing that my printer make a friend with my new Macbook Pro! Hope this will help others!

I have the same setup but with a Canon MX850. This did not fix my problem.

Hi All, I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain" I run a test print and its se

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

When I print pictures from my IMAC to my Hp C8180 they are grainy, even when I select the Best Quality- Why can't I get good quality printing from Imac ?

When I print pictures from my IMAC to my Hp C8180 they are grainy, even when I select the Best Quality- Why can't I get good quality printing from Imac ? Use the same printer with a PC and printed the same picture files- they are printed with high quality- Why can't the IMAC do the same?

Does this involve iPhoto for the Mac?
How exactly are you printing these photos?
LN

Finding shared printer from pc

form pc i'm trying to find printer on mac which is on a network. i have another imac which is connected to the network printer, so i know it's on the network.
when i go to add printer on pc and go to select a shared printer by name i type in \\owensmac\\HP_Laserjet_M1319f_MFP
when i click browse, it takes me into the computers on my network. not sure where to go from here? i'm not 100% sure i'm typing in the name of the printer correctly in the address field
as the name of the printer has spaces in it.
any suggestions or links to go to. i've been on the internet for an hour or two searching for answers with no luck.
thanks
owen

i tried running the cups admin page http://127.0.0.1:631 but get this message.
Web Interface is Disabled
The web interface is currently disabled. Run "cupsctl WebInterface=yes" to enable it.
i'm not to savy on coding so i don't want to screw this up.
when i copy and pasted Run "cupsctl WebInterface=yes"
Run: command not found came up.
I did another search for the WEB INTERFACE IS DISABLED error and this code came up
sudo cupsctl WebInterface=yes
not sure wether quotes are included or not and or the word Run
when i typed this code i received a warning about making sure the code was correct and that incorrect code could mess my computer files up.
cups seems to be the way to go with getting the info i need.
thanks
owen

Print to Windows Shared Printer from Mac on wireless network

My set up is: HP Deskjet 1050 410 USB to a WIndows 7 PC. The PC has 4 users, each password protected for login and public (not protected) folders. The Macbook is running OS X 10/6/8. I have downloaded the latest HP drivers.
I found the printer on the workgroup network and installed it as the only printer on the Macbook. When I send a job to print, I am prompted to either login as a guest or as a user with a password. Either way, I get an eror message "On Hold (Authentication required)" Under Job Info is the following message "NT_STATUS_INVALID_PARAMETER"
THis is an improvement over what was happening before when I could not find the printer in the list and had to manually use the IP address. Even then, I could not print, I would get a communication error.
The first time I installed the printer driver (an earlier driver and earlier release of OS X 10.6) I had no problems printing from the Macbook. It found the printer and printed without any password authentication. Nothing has changed on the PC, the printer is shared with all users on the network, but I can't seem to print.
I noticed many postings with similar issues but I did not see any resolution. Help! (Thanks!)

hey just want to say thanks to you guys... I just this week switched to Mac after 14 years of heavy PC use. Mac's been awesome except for that I couldn't print to my PC based printer... now I can... and I couldn't of done it with out this apple discussion thread about HPIJS.

Printing to a Mac shared printer from windows 8

How can I print to a Mac shared printer (OS: 10.8.2) from my Windows 8 PC which is using the same Apple network?
Matthias

I have tried using Bonjour on for Windows on Win8 however while it finds the printer and can add it no problem whenever a job is sent to the printer a blank page is printed. The Win8 machine can print to the printer fine if directly connected and the same driver is used when printing via Bonjour so one can only assume it's a "communications" issue between the Win8 machine and my Mac Pro which is sharing the printer.

Can't print from iMac USB; works from AEBS

I have an Epson CX6600 printer. Normally it's connected to my AEBS so that I can access it from all my computers (2 Mac, 1 Windows) and the printer works fine. However, when it's connected to the AEBS I can't scan directly to the computer, use the Epson Smart Panel, etc - so to do that I hook the printer up directly to the iMac's USB port. Works fine for scanning, but I can't print from the USB port on the iMac. Is there something I need to do to enable printing from a built in USB port on the iMac? I'm stumped! I'm using Panther.

Got lucky and figured it out myself! I had to install the printer as a USB printer; it had been only installed via the AEBS as a Rendezvous printer.

Trouble sharing printer from OS 10.3.9 to Windows XP

I have a G4 running OS 10.3.9, and there is an HP 6MP printer attached. It is on a network with a mess of Windows XP machines, and I want to be able to share the printer with them.
I did all of the standard steps (enable Printer Sharing, etc), and set up a password protected guest account.
// Start of Microsoft jargon
When I set up a Windows machine to have access to the printer, I go to the "Show Workgroup Computers" window, and open a connection to the G4. To do this, I select the guest account on the G4, and enter the related password. I then drag the icon for the printer to the "Printers and Faxes" window, and select the driver for the printer.
// End of Microsoft jargon
This is the rub: if the guest account has Admin privleges on the G4, there is no problem and I can print just fine. However, if the guest account is a standard account, then after I setup the printer on the Windows machine, it's status is "Access denied, unable to connect".
Does anybody know a way around this problem? The obvious approach is to give the guest account Admin privileges, but that defeats the entire point of having a Guest account.
Dual 500 MHz G4 Mac OS X (10.3.9)

Hi David
How about you don't use Guest account at all, just tell the XP where to find the printer connected to your Mac, by specifying an address, as described in the following link, where there is much discussion of printing from a PC to a printer connected to a Mac:
http://www.macosxhints.com/article.php?story=20040208122655345
Afterthought: By activating File sharing are you invoking Guest log on? Perhaps try just having Printer sharing only.
regards roam
Message was edited by: roam

Printing on a shared printer from our new iPad on our home network

How can I send a print job to a shared printer on our home network? The iPad uses this network's WiFi capability.

It depends on the printer. iOS devices can only print directly to AirPrint printers. All AirPrint printers are wireless but not all wireless printers are capable of using AirPrint.
To print directly from an iPad / iPhone you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or handyPrint (donation - supported). The Mac must be "on" but may be asleep for them to work. Equivalent PC options may exist but you're on your own finding them.
You can also buy this standalone print server:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html
These options enable you to use any printer available to your network, even older ones that may predate AirPrint by decades.
Otherwise you will need to buy an AirPrint printer or multifunction device.

Riddle: Printing from iMAC to printer on networked print server

Here is a Doozy:
I am having trouble printing from my new Intel iMac over a wireless network, through an attached print server.
Here is the layout & issue:
Configuration:
I have a Windows XP PC & iMac in my office.
I have a wireless network connecting the 2.
On this network & have attached the SimpleShare 250GB network HDD, with print server
I have a Canon Pixma 800 attached via USB to the SimpleShare print server.
Issue:
The iMAC cannot print out of the printer.
The iMAC searches, finds & installs the printer (name: MP800, puts it in WORKGROUP, with queue of MP800)
It sends the job & says the job is done (looking good!).
I hear the HDD fire up (a couple clicks). But nothing prints out & the printer does not recognize a job was sent to it. (ARGHH!)
I have:
upgraded to the latest firmware on SimpleShare.
The windows PC prints fine to the printer, through this same configuration.
The iMAC prints fine to the printer when connected directly.
The iMAC reads/writes fine to the HDD itself through the network.
The internet connection works fine through this configuration.
The ONLY issue is getting a print job from the iMAC to the printer.
ANY & ALL help is appreciated, its driving me crazy...

I suspect it may be a driver issue.
It may work with the PrintFab Drivers (but these cost).
iFelix

Windows 7 PC cannot recognize shared printer on iMac

My son's Windows 7 PC cannot recognize the Samsung shared printer on my iMac. Does anyone know how to rectify this? Printer sharing is turned on and my wife's iMac can connect and print on it just fine. This printer is not a networkable printer (I think) but it seems to share through my iMac fine with other Apple computers.

Might try Bonjour for Windows...
http://support.apple.com/kb/DL999

HT2275 Sharing Printer from one MacBook to another

I am trying to share a printer from one MacBook to another. One machine is running OS 10.9.1, the other is running 10.7.5. In the "Add Printers" dialog box of System Preferences, no shared printers on my home network are appearing on the 10.9 machine. What do I do to get them to appear?

In System Preferences / Sharing, make sure you have checked Printer Sharing on both computers.

Sharing Printer from iMac

Similar Messages

Maybe you are looking for