Sharing printer while running WinXP

I have a small LAN with a powerBook (OS X 10.5.4) and a Mac Pro (OS X 10.5.5 and Windows XP/Bootcamp). The Mac Pro wirelessly hosts a printer for both computers.
Is it possible to print from the laptop while the Mac Pro is up on Windows XP?
Windows on the Mac Pro prints OK, and I have printer sharing checked in the windows control panel, but the printer (Epson C82) does not appear in the printer list on the powerBook unless I restart the Mac Pro into OS X.

this made it even better. Thanks pahu
https://discussions.apple.com/thread/4154521?start=0&tstart=0
So you need to get your setup using the latest versions available for both. The first step is to remove the Canon ADV C50xx printers from your Print & Scan pane. Then you need to open Finder and navigate to HD > Library > Printers > Canon and trash the UFR2 folder. Then navigate to HD > Library > LaunchAgents and trash the file "jp.co.canon.UFR2.BG.plist".
With that completed, you need to stop the UFR2 Backgrounder service and you do this via Activity Monitor. With the monitor open, scroll through UFR II Backgrounder and then press the Quit Process button and then press Force Quit when the next window appears and exit Activity Monitor.
With this service stopped it would be ideal if you can empty the Trash before installing the v2.40 driver again.
Now install the v2.40 driver and add your printer and then check the System Information screen again. It should show 2.40 in both sections where mine shows 2.41. If it does, then try to print and see if this stops the message from appearing.

Similar Messages

No printing date is printed while running the dunning activity?

Hi SAP Experts,
The dunning proposal is created successfully but when I run the dunning activity the dunning level is updated with issue date but the printing date is not printed. Can any one let me know the root cause of this issue.
Thanks

Hi Moin,
You are right in saying, that the print date field in the dunning history gets updated after the dunning activity is executed successfully.
This is a standard SAP functionality and if the dunning level is getting incremented, then the print date field should also get updated in the Dunning History.
Is this happening for all accounts or some of them?
As a starting point, I would recommend you to start seeing the application logs for the Dunning Activity, once it gets completed.
Hope it helps...
Thanks,
Amlan

Report is giving wrong output while running in Background ?

Hi,
We have a report program which gives the correct output while running it in forground(or manually) but when we run it in backgroud it gives the wrong output. (The printout goes to the wrong printer.)
I've read in a SAP doc that:
NEW-PAGE PRINT ON even gives unpredictable
results when the print parameters are incomplete; and it suggested to use FM 'GET_PRINT_PARAMETERS to validate the print parameters before NEW-PAGE PRINT ON event . I tried the same but still our report is sending the printout to the wrong printer while running it in background.
Other events used in the program are AT NEW and AT LAST .
Can anyone confirm me NEW-PAGE PRINT ON, AT NEW and AT LAST events work correctly in background mode also.
Thanks,
Bhavana

hi
good
NEW-PAGE PRINT ON should be work in the background also,check your syntax with the below syntax,if still it is going to the different printer in the background than check with the configuration setting of printer for the particular report that you r printing,sometime it happens that even in the foreground the correct printer ideanfies but in the background that same printer didnt identify.
NEW-PAGE PRINT ON
    NEW-SECTION
    PARAMETERS pripar
    ARCHIVE PARAMETERS arcpar
    NO DIALOG.
DO 440 TIMES.
    WRITE (3) sy-index.
ENDDO.
NEW-PAGE PRINT OFF.
ENDFORM.
thanks
mrutyun^

Anyone know how to print from Win2K or WinXP to shared printer on iMac?

Help! Anyone know how to print from Win2K or WinXP to shared printer on iMac? I have a new IMac hosting a Canon iP4300, a pc running W2K & a pc running WXPsp2. All computers recognize each other and the iP4300 on the network and can share files. All Mac "Windows Sharing" & "Printer Sharing" preferences sre set correctly. Apple says the printer must be configured on the Windows computers as an SMB/CIFS network printer using a Postscript driver. I can find lots of pages on the net telling me I what needs to be done, but nothing stating how to do it. All the info I've found is either overly simplistic and or relates to the 10th dang of enterprise server administration. Would VERy much appreciate any help at all.
Victor

Please search the discussions before posting. This question has been asked many times before and you could save yourself time.
http://www.ifelix.co.uk/tech/3012.html

"Error while printing" when sharing printer under 10.6

This just started yesterday. When attempting to print from either of two other computers (both 10.4.11) to a printer (HP LJ 1160) connected via USB to a MacBook Pro (10.6.2), the print fails with the cryptic error message: "Error while printing."
I have searched these help forums and have tried repairing permissions on all computers. I have also verified that the /tmp symbolic link is in place on all computers.
I have also tried resetting the print systems on all computers. I am able to add the shared printer on the client computers, but when attempting to print to the selected shared printer I still get the error.
The Console on the client computer generates the following items in the log:
2010-01-18 08:59:49.452 TextEdit[423] PMSessionValidatePrintSettings failed (error code = -50)
2010-01-18 08:59:50.812 TextEdit[423] Invalid PMPrintSettings in print info
Any ideas?

on the wife's g4 powerbook, added a network-shared printer, attempts to print to it result in:
PMSessionValidatePrintSettings failed (error code = -50)
Invalid PMPrintSettings in print info
this same n-s-p works fine on my g4 powerbook, also 10.4.11...
and i haven't been able to print to this printer from my core duo minimac running 10.6.2:
3/1/10 6:55:37 PM AddPrinter[21005] Error loading /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: dlopen(/Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm, 262): no suitable image found. Did find: /Library/Printers/hp/aio/PMs/hpaio_print_pm.plugin/Contents/MacOS/hp_aio_printpm: mach-o, but wrong architecture
3/1/10 6:55:37 PM AddPrinter[21005] Cannot find function pointer HPPMPluginFactory for factory 00425E6D-6656-11D7-966D-0003934BEDFE in CFBundle/CFPlugIn 0x1444f750 </Library/Printers/hp/aio/PMs/hpaio_printpm.plugin> (bundle, not loaded)

Hi All, I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain" I run a test print and its se

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Regarding Printer Tray Selection while running BI Publisher Report.

Hi All,
Below is my requirement.
When ever user tries to run the report, based on the customer code the printer tray has to be passed to printer so that the report gets printed by selecting the paper from the same tray. Each printer tray will have different paper color.
Let me know how can I achieve this? Its very urgent..
Thanks
Babu

hi,
Just now i identified that its not deleting the report but its reverting back the report to its previous version. Let me explain it you in details:
suppose i created a report with following query source as Oracle Database:
select territory_code from fnd_territories_tl
where LANGUAGE = USERENV ('Lang')
now if i modify the query in the same report to following query:
<dataTemplate name="dunningLetter" description="Dunning Letter Report" dataSourceRef="IPOVIS" defaultPackage="xx_shpckt_init" Version="1.0">
<parameters>
<parameter name="p_order_number" dataType="character"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[select order_number from oe_order_headers where order_number = :p_order_number
]]>
</sqlStatement>
</dataQuery>
<dataTrigger name="beforeReport" source="xx_shpckt_init.beforeReportTrigger"/>
</dataTemplate>
and then if i run the report again, the report will still show the result of previous query!! and then if i go back to data model then it will show the previous query there!! not sure why is it doing this way?? Also sometimes, when i create a new report and then view the result then it will revert its previous stage i.e report without Data model, LOVs and parameters!! That is the reason i thought its deleting the report while running report.
Please suggest why is it acting this way? Appreciate your help and time.
Thanks,
Regards,
AS

Failed tp open .prp file while running HAL ...it says Sharing voilation ..

Failed tp open .prp file while running HAL ...it says Sharing voilation ..
I am running a HAL job.
While opening .prp file it says error Sharing voilation cannot open file.
Please help to resolve issue.

Are you sure there are not multiple instances of the prp open, say 2 remote connections both with the file open.
If there is a lock on the file and you are able to reboot the machine I would give that a go.
Cheers
John
http://john-goodwin.blogspot.com/

Pages 2.0.2 won't print to shared printer

help! i'm at the end of my rope here.
pages used to print to my shared printer no problem. but since a hard drive failure in my powerbook g4 1.33 it's been no dice.
since getting the hd, everything has been reinstalled: 10.4.8, epson printer drivers, iworks; EVERYTHING. other apps print to the shared printer fine. (the shared printer is on a home network, connected to a mac pro. access via a wireless router (dlink))
i tried resetting the powerbook's PMU/PRAM. still, a popup window says: "error while printing."
when the PB is directly connected to the printer 'pages' prints fine, only to the shared printer. nothing on the network has changed at all. (except one of my attempts to fix this was to reset the printer system on the mac pro)
i've tried all the suggestions in the forum (searching for 'pages print error'), this includes turning off duplicate fonts with fontbook, resetting the printer system on the PB in various ways as suggested, deleting pref files and the like.
steps to print involve these:
1. open pages.
2. open file
3. select print, select shared printer.
4. click print.
5. a slight pause for about 1sec then the error message comes up: Error when printing.
any subsequent try at printing the same file or another file the message pops up immediately with no delay.
what am i missing? is there something on the network side?
i can't think of anything else to check. i've looked at apple support articles till the wee hours of the morning.
can someone offer any suggestions? you would have my undying gratitude!!
cheers and happy holidays,
sean
2.66 Mac Pro, PB G4 1.33Ghz Mac OS X (10.4.8) Wacom tablet (Intuos2 & Grapphire2)

hey folks,
i've used app zapper to delete pages and then re-installed it. same thing happens. no luck.
are there any other setting that pages might access? does PMSessionValidatePrintSettings refer to Print Manager?
could it be permissions on the print manager's plist file? i'm just guessing as there was a slight name change on her user name when her settings, etc. were imported thru the migration assistant after the hd failure. it's a guess as i've run into this problem when switching from my PPC to the Intel. my user name went from seanw to sean and some of my apps were still labeled with the old "seanw" as the owner. (this was because i dragged and dropped some stuff instead of using the MA as i didn't know it existed.)
if no solution presents itself how would i go about transferring my wife's user profile to another, new profile with out too much headache?
would i create the new user and use MA to transfer her stuff from her backup?
thanks for the suggestions, you have no idea how much this is appreciated.
cheers,
sean

Application hangs while running a report from Forms

Hi all,
I am getting a problem regarding running reports from Oracle forms application for printing in a shared printer at client system. There is no problem when I set the DESTYPE to HTMLCSS or FILE. But when I set it to PRINTER then the application hangs and report server gets busy. Once this problem occurs other reports from other client systems are not generating even if this is a HTMLCSS or FILE type.
The thing is the application has ran successfully for two months. Suddenly from last few days the problem is arising.
Few things that I have noticed:
1) When the application hangs I cheked the Task manager, where the process rwlpr.exe is running. If I manually ends the process there the application comes back with a message 'unable to run report'.
2) I have checked few log files, where I have found few log files whose names end with a job number. The file generates from a succesfully running report shows few steps tht end s with closing the printer. But the file that is generated from an unsuccessfull job stops at the step 'Opening Printer //<machine name>/<printer share name>'.
3) Then finally I have changed the DESTYPE to file and using the HOST command printing the text file to shared printer in dos mode. Its working fine. But often the first problem arises again.
What are the possible resons that may cause this problem.
Looking for your positive response.
Thanks and regards
Sandy

From dos prompt I have used the type commad.
From server machine in dos prompt I have used,
type d:\rep.txt > \\<client machine name>\<printer shared name that is connected to client printer>
from Server machine I have opened a Notepad doc, File >Print >Selected the printer that is in client machine.
This works fine.
Now my code to print a report directly to printer,
V_PRINTERNAME := '\\mmondal\mmondalprn'; -- shared Printer name at Client machine
repid := find_report_object('REP_BANK_MST');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,V_PRINTERNAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'kt30');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no P_ISPOSTED='||:CHK_ISPOSTED);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=kt30','_blank');
ELSE
message('Error when running report');
END IF;
exception when others then
     message(to_char(sqlcode));
This hngs the application. And other requests enqued in job queue does not process. If I cancel the stucked job then other reports complete sucessfully.
Log - rwserver.trc shows the following:
[2011/6/14 4:48:28:437] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 1051
[2011/6/14 4:48:28:484] Debug 50103 (RWCacheItem:addFile): add file 'mmondalprn65558177.txt' for job 1051
[2011/6/14 4:48:28:484] Debug 50103 (RWCache:updateCurrentCapacity): Current cache capacity is 32948731
[2011/6/14 4:48:30:671] Exception 50157 (): Error while sending file to printer \\mmondal\mmondalprn. Exit with error code 1848
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.utility.Utility.newRWException(Utility.java:756)
     at oracle.reports.utility.SOSD.sendPrinter(SOSD.java:128)
     at oracle.reports.server.DesPrint.sendFile(DesPrint.java:102)
     at oracle.reports.server.Destination.send(Destination.java:484)
     at oracle.reports.server.JobObject.distribute(JobObject.java:1582)
     at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2231)
     at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:134)
     at oracle.reports.server._EngineCommImplBase._invoke(_EngineCommImplBase.java:94)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:671] State 56016 (JobManager:updateJobStatus): Job 1051 status is: Executed successfully but there were some errors when distribute the output
REP-50159: Executed successfully but there were some errors when distribute the output
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:notifyWaitingJobs): Master job 1051 notify its duplicated jobs.
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 1051
[2011/6/14 4:48:30:671] Debug 50103 (EngineManager:updateEngineState): Engine rwEng-0 status is 1
[2011/6/14 4:48:30:671] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Ready
[2011/6/14 4:48:30:671] Exception 50159 (): Executed successfully but there were some errors when distribute the output
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1009)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1779)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:1045)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1280)
     at oracle.reports.server._ConnectionImplBase._invoke(_ConnectionImplBase.java:401)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:671] Debug 50103 (JobManager:runJobInEngine): Encounted exception in job 1051
[2011/6/14 4:48:30:671] Debug 50103 (ConnectionImpl:runJob): jobid = 1051 Failed with exceptionoracle.reports.RWException: IDL:oracle/reports/RWException:1.0
[2011/6/14 4:48:30:671] Exception 50159 (): Executed successfully but there were some errors when distribute the output
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1009)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1779)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:1045)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1280)
     at oracle.reports.server._ConnectionImplBase._invoke(_ConnectionImplBase.java:401)
     at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
     at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
     at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
     at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
[2011/6/14 4:48:30:703] Info 56013 (ConnectionManager:release): Connection 196 is released
[2011/6/14 4:48:30:703] Info 56013 (ConnectionManager:release): Connection 197 is released
[2011/6/14 4:48:31:31] Debug 50103 (JobManager:removeJob): will remove job 51
[2011/6/14 4:48:31:31] Debug 50103 (RWCache:deleteItem): delete item for job 51
[2011/6/14 4:48:31:31] Debug 50103 (RWCacheItem:clear): job 51 become invalid
[2011/6/14 4:48:31:31] Debug 50103 (RWCache:updateCurrentCapacity): Current cache capacity is 32942484
[2011/6/14 4:48:31:46] Debug 50103 (JobManager:removeJob): removed job 51
[2011/6/14 4:48:47:906] Info 56013 (ConnectionManager:release): Connection 198 is released
[2011/6/14 4:48:51:890] Info 56013 (ConnectionManager:release): Connection 199 is released
[2011/6/14 4:50:48:437] Info 56013 (ConnectionManager:release): Connection 200 is released
Most of the time when all the instances are restarted then for the first time it runs successfully.
The above code worked fine for Last two months.

Macbook Pro w/ Lion 10.7.2 & Windows 7 Shared Printer (Lexmark X5650)

I just recently purchased a MacBook Pro with Lion OS 10.7.2 for my wife and have been trying to connect her Macbook to my Lexmark X5650 Printer that is connected to my Windows 7 Professional PC. Tried everything with no success. Any ideas? I have always been a PC user and this is my first MAC and really know nothing about them. Wife had to have it for Dental School and I am getting very frustrated
List of things I've tried thus far:
-Installing printer using CUPS
     smb://server/Lexmark
     smb://workgroup/server/Lexmark
     smb://username:password@server/Lexmark
     smb://username:password@workgroup/server/Lexmark
     where the server is I have tried using both the IP Address and Computer Name of the shared Printer
-Installing printer using "Advanced" options under "Print & Scan" to which I used the address settings as above
-Tried the LPD setting as well as just setting it straight up by selecting "Windows" under "Print & Scan", selected workgroup, computer name, and printer and everything appeared to install correctly until attempting to print test page
-Printer is shared on Windows PC
-Even tried creating an Administrative User and Password specifically for Printing
-Made sure I had the latest MAC Driver for the Printer
I have pretty much tried every setting and suggestion that can be found on google and always get the "Authentication Required" error or nothing at all printing just pauses.   When I click resume and enter in the username and password for my windows pc, it says that its sending the job, but then nothing happens and also whenever I try to print another test page after that, I have to constantly click resume and enter the username and password manually regardless of how I set it up.
Is this a printer compatibility issue, is this an issue with Mac OS 10.7.2 (Lion) w/ Windows 7 or what? Every thread that I have read does not appear to have any responses from Apple with a workaround or any kind of explanation. All that I have come across is that most people had no problems printing through shared Windows 7 printers until they upgrade to Mac Lion OS.

The "Authentication Required" error can be related to the print driver. Many vendors create their OS X drivers for direct communication from the Mac to the printer. As soon as you stick a Windows computer or 3rd party print server in between the Mac and the printer, then you can get this error.
The thing to note is that when you added the printer via the Add Printer > Windows pane, vs CUPS or the Advanced SMB, you would have been prompted for your Windows credentials to see the printer share after selecting the Win7 computer name. If entering these details then showed you the shared printer, this rules out the problem being related to authentication information.
Working on the premise that the error is being caused by the driver then there are other driver options for OS X, such as Gutenprint. However, looking through the supported driver list for Gutenprint v5.2.7, there is not that many Lexmark printers and certainly not the X5650. And looking at other driver packages available for OS X, I cannot see this model so you may need to look at other options.
One option is LPD which you have tried already. But I think this would have failed due to the service not running by default on Windows 7. While it is certainly present on Win7 for you to connect to a network printer using LPD, the service so that other computers can print via Win7 using LPD has to be enabled. This is done via Control Panel > Programs & Features > Turn Windows Features ON/OFF > Print & Document Services > LPD Print Service. With this enabled and running (you can check via Services) then the queue should be created in OS X using a syntax of lpd://ip_address/printer_share_name. Note that no authentication is required and if the driver will support this type of connection then it could be a quick win. But again the driver could be the issue, although I believe you will see a different error if it has an issue with this type of network connection.
So another workaround is detailed in this blog. This allows you to use the vendors driver on the Mac but I have to say that I have not tried this with Lion and Win7. My last test with this setup was with Win XP and Snow Leopard.
What may prove to be the easiest win is to purchase a Airport Express. With the printer connected to the USB port of this wireless device, the Mac can use the Lexmark driver and Win7 should have no problems printing to it either, although it would be handy to install the free Bonjour for Windows utility to help with locating the printer.
Hope this helps and please respond if you need any further information/assistance.

Getting error while running Perl adcfgclone.pl appsTier

hi ,
i m getting error while running Perl adcfgclone.pl appsTier
error:ksh: Perl: not found
i check for per and ksh
which perl
/usr/bin/perl
which ksh
/usr/bin/ksh
(my os out put for perl ,my os is SunOS testserver 5.10 Generic_137137-09 sun4u sparc SUNW,Ultra-250)
perl -V
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/5.00503
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/site_perl/5.005
/appl2/applmgr2/prodappl/au/11.5.0/perl
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
which i need to set in path
PATH=$PATH:/usr/local/bin:/usr/ccs/bin:/usr/sfw/bin (like this )
export PATH
please help me out

hi ,
here is the out put
# pwd
/appl2/applmgr2/prodora/iAS/Apache/perl
# perl -V
Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
Platform:
osname=solaris, osvers=2.10, archname=sun4-solaris-64int
uname='sunos localhost 5.10 sun4u sparc SUNW,Ultra-2'
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO',
optimize='-xO3 -xspace -xildoff',
cppflags=''
ccversion='Sun WorkShop', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =''
libpth=/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lc
perllibs=-lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-R /usr/perl5/5.8.4/lib/sun4-solaris-64int/CORE'
cccdlflags='-KPIC', lddlflags='-G'
Characteristics of this binary (from libperl):
Compile-time options: USE_64_BIT_INT USE_LARGE_FILES
Locally applied patches:
22667 The optree builder was looping when constructing the ops ...
22715 Upgrade to FileCache 1.04
22733 Missing copyright in the README.
22746 fix a coredump caused by rv2gv not fully converting a PV ...
22755 Fix 29149 - another UTF8 cache bug hit by substr.
22774 [perl #28938] split could leave an array without ...
22775 [perl #29127] scalar delete of empty slice returned garbage
22776 [perl #28986] perl -e "open m" crashes Perl
22777 add test for change #22776 ("open m" crashes Perl)
22778 add test for change #22746 ([perl #29102] Crash on assign ...
22781 [perl #29340] Bizarre copy of ARRAY make sure a pad op's ...
22796 [perl #29346] Double warning for int(undef) and abs(undef) ...
22818 BOM-marked and (BOMless) UTF-16 scripts not working
22823 [perl #29581] glob() misses a lot of matches
22827 Smoke [5.9.2] 22818 FAIL(F) MSWin32 WinXP/.Net SP1 (x86/1 cpu)
22830 [perl #29637] Thread creation time is hypersensitive
22831 improve hashing algorithm for ptr tables in perl_clone: ...
22839 [perl #29790] Optimization busted: '@a = "b", sort @a' ...
22850 [PATCH] 'perl -v' fails if local_patches contains code snippets
22852 TEST needs to ignore SCM files
22886 Pod::Find should ignore SCM files and dirs
22888 Remove redundant %SIG assignments from FileCache
23006 [perl #30509] use encoding and "eq" cause memory leak
23074 Segfault using HTML::Entities
23106 Numeric comparison operators mustn't compare addresses of ...
23320 [perl #30066] Memory leak in nested shared data structures ...
23321 [perl #31459] Bug in read()
27722 perlio.c breaks on Solaris/gcc when > 256 FDs are available
SPRINTF0 - fixes for sprintf formatting issues - CVE-2005-3962
6663288 Upgrade to CGI.pm 3.33
REGEXP0 - fix for UTF-8 recoding in regexps - CVE-2007-5116
Built under solaris
Compiled at Jul 31 2008 12:07:52
@INC:
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
Thanks &Regard

Tiger machines can't print to Leopared shared printer

I have an HP Laserjet 1320 connected to my Mac Mini (Leopard) and this works as expected with that machine. I have tried sharing this, and other machines on my network (all running Tiger) can connect to port 631 on the Mini and print test pages. However, they can't actually print anything from any application. Instead, a dialog box saying simply "Error while printing" pops up.
All the Mini's cups logs look fine, but the other machines say such things as:
I [13/Nov/2007:20:09:26 +0000] Added remote printer "HPLaserJet_1320series@utovogh"...
E [13/Nov/2007:20:09:35 +0000] getprinterattrs: resource name '/printers/ ' no good!
Configuring the printer as an IPP printer rather than relying on bonjour gives different effects. The job starts to print but then the printer is stopped. The printing machines' logs say:
I [13/Nov/2007:21:01:22 +0000] [Job 3] Connected to utovogh.local...
D [13/Nov/2007:21:01:22 +0000] [Job 3] Getting supported attributes...
E [13/Nov/2007:21:01:22 +0000] PID 412 stopped with status 1!
E [13/Nov/2007:21:01:22 +0000] [Job 3] Destination printer does not exist!
Has anyone any suggestions?

Eventually I discovered the following.
When setting up the client machines to print to the shared printer, the machine hosting the printer identified itself with bonjour as $HOSTNAME.local. Upon looking at http://localhost:631 on the client machines I noticed that the printer was identified as $PRINTER_NAME@$HOSTNAME, the ".local" part having disappeared. So, the solution was to add an entry to /etc/hosts on the clients.
Next, to find out why printing is so slow from the clients...

Unable to connect to USB shared printer

I hope someone will be able to help with this. I recently had to change my home network setup, and now I can't wirelessly connect to the USB printer shared through my PowerMac G4. Previously, I had AT&T DSL coming in through a Westell modem, with the line out going to the WAN port of the Airport Extreme base station. I then connected the LAN port on the base station to the uplink port on a Linksys switch, to which were connected the iMac G5 and the PowerMac G4. I had a Samsung laser printer connected to the USB port on the base station and an old Epson Stylus Color 740i connected to the G4 with USB printer sharing turned on in System Prefs. Everything worked fine - I could print to either printer from any computer, including wirelessly through my MacBook.
Unfortunately, I have been experiencing slow speeds with my DSL, so one of the steps an AT&T tech took was to replace my Westell modem with a new AT&T 2Wire, which also serves as a router (or switch, I'm not sure which one). Now I don't have the Linksys switch, as it's not needed. The iMac G5 and the G4 are connected directly to the modem through ethernet, and another ethernet port is connected to the WAN port on the Airport base station. There is no connection to the LAN port on the base station. The two printers are connected in the manner I described above. I can print to either printer from the iMac and the G4, but from my MacBook I can only connect to the Samsung that is plugged into the base station. Although printer sharing is still turned on in the G4, I don't see the Epson printer listed anywhere when I try to add a printer on the MacBook. Also, I used to be able to browse the local network to connect to my other computers from the MacBook, but now they don't show up in the browse window. I can connect to them if I put in the computer's IP address, which is now in a different format (192.xxx.x.xx) rather than 10.0.x.x like it used to be. I only mention these last two points because they might be related to why I can't connect to the printer.
Sorry this is so long and complicated, but if anyone has more networking experience than I do, please help. Thanks!

linbobmiller wrote:
Just bought an HP c310a printer with wireless capability. When I install it on the wireless network it say I need to input a MAC address. I don't think that is necessary, but I can't bypass it. Any suggestions?
Your printer is requesting a mac address?
Is that before or after the printer showed you the available ssid's while running the wireless setup.
Did you run the wireless network test on the printer? and if so did it report any errors?
Which wireless setup are you running?
This may help
http://h20563.www2.hp.com/p/_wireless/printer-setup-help.html#preparing

Printing from JBOSS (on a windows server as system account) on a mapped (shared) printer (installed as administrator)

Hi,
I have JBOSS running on a Windows Server. Our applications on JBOSS use network printers which are installed on the server for printing purposes. This works fine so far, except for one case for which I ask you for support:
If I map a printer, which is (only) conneted via USB with a PC and shared in the network, the printer is available on the server with JBOSS and can be mapped, BUT JBOSS is not able to see this particular printer and print on it, while the other installed
network printers are available and functional via JBOSS.
My researchs have led to the conclusion, that JBOSS doesn't see this printer, as JBOSS is running unter the SYSTEM account, while the printer was installed with an administrator account. Strangely network printers don't cause this issue.
If I start JBOSS with an administrator account, it can see and use the shared printer. But unfortunately this is not an option, as it causes other issues with our applications.
So the question is: Is there a way to make the printer visible for the SYSTEM account? Or any other suggestions?
Many thanks in advance and best regards,
Amir

simple solution is to install your printers locally rather than connecting to a network resource, locally installed printers have the advantage of being
visible to every user on your system including system accounts. To install a printer locally rather than connecting to a network printer start the "Add Printer Wizard" and select "Local printer attached to this computer"
Best,
Howtodo

Sharing printer while running WinXP

Similar Messages

Maybe you are looking for