Sharing report between two business areas?
Hi,
We have two business areas : Sales and Sales with Gross Profits.
Sales with Gross Profits has some columns that Sales business area doesn't have.
Is it possible to share a report between those two business areas if the columns used in the report are the same, without any possible issue?
Thanks
Hi,
Is it possible to share a report between those two business areas if the columns used in the report are the same, without any possible issue?No, a workbook using items from one or more folders. The folders used by the workbook cannot be easily changed. You could of course have the folders used by the workbook in both business areas, but then you would have 2 versions of the folder in the business area, one with the extra columns and one without.
Rod West
Similar Messages
-
How can i get report between two dates?
Hi
how can i get report between two dates?
for example i want get reports between 20/4/2002 & 27/4/2002.
my table has date column and i can get first date( exam : .... where date:=a and/or ....i don't know this part)
thanks alot.
Regards
The Oracle Reports Team
http://otn.oracle.com/where exam_date between :from_date and :to_date
from_date and to_date are user_parameter -
Difference between Segment & Business Area
Hi All,
Could any one please help me in explaining what the difference between Segment & Business Area? And what does it mean by We can create financial statements at any time for the Segment dimension. For this, you need to set up a zero balance setting for the Segment characteristic can any one could please help me on this.
And also please explaining what this Document Splitting is? How is it helpful? Please give an example in real time senior. I have already gone through Help document, please dont suggest me that.
Thanks in Advance to all.
Regards,
GiridharDear Giridhar
Earlier in SAP we used to have very limited reporting hierarchies, in which business area is one like Company Code. But obviously in FI or CO either user/ partner/ management always interested in viewing the business on different entities in different forms of reports.
So, with the newGL SAP has given a provenance to users to create their own reporting entities. So, with the newGL customers can generate balance sheets by almost any dimension by defining a SEGMENT, meaning: cost center, plant, etc even you can define business area as a segment.
For this purpose was create the SEGMENT entity. So that it helps customer in segment level reporting.
We Can create financial statements means we can generate balance sheet or profit and loss statement on segment.
For lay mans terms I can tell Business Area is on example of Segment. Hope it clarifies..
In order to understand document split you should be familiar with New GL / Ledger accounting...
Regarding Document Splitting: Consider following realtime example
Invoice ( Example: Split on profit center)
Entry View
Vendor Invoice
PK Account Pr.Ctr Cost.Ctr Amount
40 Expense PC01 CC01 400
40 Expense PC02 CC02 600
31 Vendor 1000 -
Say Document number 156123
General Ledger view above document becomes as follows..
PK Account Pr.Ctr Cost.Ctr Amount
40 Expense PC01 CC01 400
40 Expense PC02 CC02 600
31 Vendor PC01 400 -
31 Vendor PC02 600 -
Suppose you got discount while paying above invoice then
Vendor Payment (entry view)
PK Account Pr.Ctr Cost.Ctr Amount
25 Payable 1000
50 Bank 970-
50 Discount 30 -
the enhanced document of the above will be as follows... discount will be splitted across profit centers ...
PK Account Pr.Ctr Cost.Ctr Amount
25 Payable 1000
50 Bank 970-
50 Discount PC01 CC01 12 -
50 Discount PC02 CC02 18-
For the above document the general ledger view will be as follows..
PK Account Pr.Ctr Cost.Ctr Amount
25 Payable PC01 400
25 Payable PC02 600
50 Bank PC01 388-
50 Bank PC02 582-
50 Discount PC01 CC01 12 -
50 Discount PC02 CC02 18-
Basically the document split will distribute the money depending on your split method you have configured in SPRO.
Don't confuse too much, it is very easy if you go step by step in SPRO -- especially Finanacial Accounting (new) configuaration.
Hope I tried to answer your query.
Regards
Siva -
Cross Business area Transactions bettween two Business area in Classic GL
Dear experts,
we are not in new GL and we are still in Classic G/L and we have two business areas where we are doing cross business transactions and clinet want tallied trail balance of each month.
How can we achive the above situtaion. I know new G/L where systeom will take care for tallied trail balance by using Zero balance clearing account.
Thanks Reagards,
BramhaiahPlease activate Business area financial statements in OB65.
Indicator: Business area financial statements required?
Indicator that a balance sheet and/or a P&L is to be created per
business area for internal purposes.
Use
If the indicator is set, then the "Business area" field is always ready
for input, regardless of the field control of the posting keys and of
the accounts when you enter documents. This indicator results in
required entries in the Controlling (CO), Materials Management (MM), and
Sales and Distribution (SD) components.
Rgds
Murali. N -
Two business area in one entry
hi..
i received a payment from customer.when i check this voucher by fb03 than in a single document it is showing Business Area 1100 and 1200 both. How the System is allowing to select two business area in one entry?
Thanks & regards
Rekha sharmaHi
At the time of initial posting of the document itself you might have posted two line items with a two business areas. Try to post only one line item. There is no standard control to stop the posting of 2nd line item by Standard SAP.
Cheers
Srinivas -
Display the report between two dates
Hi,
I'm new to this application.i have created two date fields item.i want to display the report between two date fields.please help me.how to do?.
By,
Prem.Prem,
See this example:
http://htmldb.oracle.com/pls/otn/f?p=31517:99
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------- -
Record a videocall with shared content between two endpoints
Good day! I faced a next task a record of a videocall between two endpoints. For example, a videocall with shared content between two DX70. I doubt that MediaSense is able to record content, whereas Telepresence Content Server is extremely expensive solution. What simple way is for sorting out my issue?
I believe that if you edit any song information (Name, Artist, Album, etc.), iTunes refuses to edit the actual file (but keeps a cache record of the changes). If you "Compile iTunes Library" (see below), it will make a change to the duplicate file it creates, and keeps record of the ratings as well.
To compile your iTunes library, go to the "iTunes" option, and select Library... >> Organize Library... and select "Consolidate Files". This will duplicate your files, and move the duplicates to the iTunes Music Folder (organized by artist and such). You can then copy and move this file to your iMac. -
Report Writer report required by Business Area GSBER for table GLPCT ECC6
Please help,
I have a requirement for report writer report by Business Area (GSBER) for table GLPCT.
I am using Libruary PCA which has GSBER already activated
In report I am able to select GSBER in General Data Selection and generate.
However when I execute report I get error message GR410 "Characteristic GSBER cannot be combined with key figures" .
I have looked at SAPnotes 929889 1155524 and 358251, which describes solution to add field to CCSS table (structure CCR1S) however I cannot work out what structure to change for table GLPCT used in my report.
Steve
Solution was to use Libruary 8A3
Edited by: Debra Dunford on Jun 29, 2011 10:34 AMHi ,
If you are using the cube: 0FIAP_C20, then i guess you are using the standard extractor 0FI_AP_20 . One thing which i remember that there is a standard view in ECC : LFC1_AEDAT.
This view has two tables : LFC1 and BWFI_AEDA2.
LFC1 - Vendor master (transaction figures)
BWFI_AEDA2 - BW FI: Log Table for Changed Transaction Figures
This standard extractor uses table LFC1 to show vendor balances.
And the table BWFI_AEDA2 contains the log of the changes that has taken place business area wise and account no of the vendor wise .
Please check the view definition to confirm the same . Once you will see the joining conditions in this view you will get a clear picture of the above point .
So for your issue, you can do datasource enhancement of 0FI_AP_20 .
The logic will be based on LIFNR,BUKRS,GJAHR available from the datasource , fetch the business area from this view and populate it in your datasource .
But first check in the table BWFI_AEDA2 whether for the field BWFI_AEDA2-TABNAME= lfc1 , business areas are maintained .
Hope the above reply was helpful.
Thanks & regards
Edited by: DEADLOCKS on Apr 23, 2011 10:52 AM -
Sharing information between Hyperion Business Rules
I am trying to share information between two Hyperion Business rules in EAS console.
Suppose for example , I calculated a value and stored in local variable in one Business Rule.
I would like to have this information in another business rule.
Any idea about the possiblities.?
I tried to use Global Variables in EAS but the Global variables are fixed and cannot be changed.
Thanks ,
RajanCan you make a HBR local variable the target of a value? Doesn't that local variable have to resolve to a member in an Essbase database sooner or later if it's going to receive a data value from a formula?
Or did you create a local variable as Real and then used that as the target? Maybe that would do it? (Obviously I've never done this.)
Could you create a temporary place in the database to stick it and then delete it?
Something like:
1) Local variable = some kind of formula/calc
2) No Account->No Product->No Scenario->whatever = Local Variable value. The point is an unused member that will let you set a value without overwriting permanent numbers. That shouldn't be too hard to find in a Planning app.
3) In HBR #2, go after that member combination and number from #2, stick it into a local variable, and set that location in #2 to #Missing.
Kind of painful, but it shouldn't really be that tough. You will need to make sure you create the block in #2.
Regards,
Cameron Lackpour -
Sharing iCal between two users
Problem: Need to know how to share calendar (and address book) between two users. We both have iphones that we'd like to sync to so we'll have 'home' calendar. It seems like it should be an easy process but so far, no luck.
Right, seems the answer is 'Not really'. You can publish an ical calendar - but that is read only.
Which is really quite terrible. Not what we expect from an apple solution.
2 adults with 2 iphones can share one life and one mac - why can't we build a shared calendar?
BUT.........
There is an alternative that isn't TOOOO hard to set up.
Google calendars will sync with ical, so if you both have gmail addresses you can create a calendar you can share in iCal.
It's a bit faffy but not too taxing
1 open your gmail and set up a calendar
2. look under My calendars/settings
/share this calendar
and add the gmail address of your sharee
select "make changes"
this means they can add to it when they accept the invitation.
3. go to the first tab and select
/calendar details
look for
/Calendar Address: ICAL
copy this address and mail it to the new user.
when they log in they can then use that ical url to add to their calendar list.
Phew...
This may not be the exact way to do it, and some steps may be superflous - but i now have a shared calendar between 2 people's ical diaries on one mac and visible on two separate iphones as a google calendar (the iphone ical however will only update when you sync)
Boo:
1. having to use googlecal to set up or edit events - iCal will treat the shared calendar as 'read only'
2. iphone ical not updating automatically - you need to use the calendar in google to see if any new dates have been added since your last sync
Yay:
1. as its google - it will ACTIVELY share any new events on your iphone - at least in the google calendar (see 2)
So - all in all, a flawed 'pc-style' workaround sticking out conspicuously in an otherwise 'apple standard' experience.
At the moment it seems google calendars are a better bet than ical - this will not do.
Apple! Deal with it please - shared calendars between users first - then you can worry about 'push' updating later. -
Sharing data between two separate user sessions
Hi all!
I have been trawling my brain for a solution to this - any help will be appreciated!
I would like to create a single instance of a class but share that instance over more than one user session (two separate users but both running concurrently).
Just as you can pass data between sessions using ABAP memory - I would like to pass data (specifically an object reference) between two separate users that could even be logged in to two separate application servers...
Even a mini Client/server solution would suffice but I cannot figure one out!
Is this possible?
Many thanks for your thoughts in advance...
NHello N K,
sorry thats not possible. Sharing a data item / object instance requires at least a common physical memory. As this is not guaranteed between different app. server this is technical not possible.
With release 640 ABAP offers the new feature Shared Objects. These mechanism allows access by different users and some propagation to differnt servers.There is an interesting article on the ABAP SDN homepage
https://www.sdn.sap.com/sdn/developerareas/abap.sdn
For relases below more or less the database is the only chance to store data accross application servers (known to me). One exception might be the ENQUEUES which might (mis)used to store some Flags.
Kind Regards
Klaus
Link to Shared Objects PDF
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/shared objects in abap -
Confused about sharing music between two ipods
I have a 30GB ipod video, and I bought my husband an 8GB nano for Christmas. I have been searching the threads trying to figure out how we can share music, but I seem to get conflicting information. I understand how to create separate libraries and I think I understand how to allow him access to my library (move itunes music folder into public folder?) but am still unclear about sharing music between ipods. Because in some of the posts, I have read that while you can share music and listen to it via multiple itunes libraries, you can ONLY listen to it on the computer--you cannot get it onto another ipod due to anti-piracy measures.
I know I could create a playlist for him in my library, but I like to autosync my ipod and I don't really want his music on mine, because the songs we BOTH like I've already imported into my itunes library. I was hoping to set up a separate library for him, import my music files into it, then let him delete the artists he's not interested in and add the music he wants that I don't. But I don't want to go through all that if he won't be able to play the shared songs on his own ipod.
I hope all this makes sense. Can someone who shares songs in this way give me some advice? Again, I would like for us to maintain separate libraries but I would like to make mine available to him so he doesn't have to reimport all the CDs I've already imported (and I don't want to waste computer space by having multiple copies of the same songs).
Any help would be appreciated!I know I could create a playlist for him in my library, but I like to autosync my ipod and I don't really want his music on mine, because the songs we BOTH like I've already imported into my itunes library.
Ver easy to accomplish.
I have one library, two 4GB iPods and ~20GB of music.
Rather than duplicating libraries or creating separate user accounts/sharing music you can't load, etc. which simply takes up space on the disk drive, use the same library and use sync only what you want.
Create playlist(s) of your own music from the library.
Add/remove from those playlists as you want.
Connect your iPod, select it in iTunes and select the Music tab.
Select Sync music, Sync selected playlists and choose what you want.
The way I do it is I create a main playlist (Chris's Music) of music in the library that I like.
I also create a smart playlist (Not Chris's Music) and set it to Match Rule - Playlist is not Chris's Music.
This helps to manage my music by showing all music not in main playlist so I can browse for music I may have missed or now want to add.
I do the same for my daughters iPod except she gets to pick her own stuff.
This way whenever any music is added by either of us, it is available to the other with no problems. -
Reports for two costing Area With one operating concern
Hi,
What are the reports I can get if I am having two different costing area for my comapnies with same operating concern
Thanks in advance for your input
CHEERSThanks Sreekanth ,
I want to what are the reports that will be generated. And what cannot be done if we have two controlling area instead of one.
CHEERS -
Automated Reconciliation report between two cubes
Hi All,
I need to create a query to do reconciliation between two cubes. Please help me to know the steps how I can go ahead.
I have built a multiprovider on top of those cubes. Please let me know what need to be done in query to do reconciliation.
Regards,
AnjaliHi Anjali,
I am assuming that by reconiliation you mean to check if the data in the two cubes is matching or not. If this is your requirement, then you can create a report in BEX Query designer, in the columns put dataprovider and below that put the keyfigures, and in the row you can put the characteristics for which you would like to reconcile the data for.
Run the report and compare both the columns.
Hope this helps.
Regards
Snehith. -
File Sharing problem between two macs on the same network.
Have a iMac and a Mac Mini and a MacAir on the network. We have file sharing turned on on all 3. The Mac Mini keeps popping up a error message that states "There is a problem connecting to a Server "iMac". However the Mac Mini is connected to the iMac and is sharing files between the two.
This has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
Maybe you are looking for
-
Games that came with Windows Vista
I just recently had a system recovery completed and an increase to the PC performance (more speed). Prior to this, games such as FreeCell, Spider Solitaire, etc. worked just fine; now they are "lagging". I have all the recent driver/devise updates,
-
Wireless Home Theatre System Interfering with my Macbookpro to Airport
I brought a wireless 6.1 home theatre system for my living room and now my macbook pro cannot link up to my airport (the flat one) that is located in my bedroom when I'm watching dvd and wants to work on my macbook pro at the same time. Turning on in
-
SQL Query string in VBA Access 2010
Hi everyone, I am writing sql queries in VBA Access 2010. Now, i am very new to VBA programming, so i don't know how i have to write te string for the query. I mean, are the " a,d _& sings in the good place? The query sits behind a button on the form
-
Is it possible to lock down the back end of a form created in designer. I don't want people to take my form...and open it in designer and change the back end. Is this possible...if so how? Thanks, Tyler
-
We get the following message once a month "We're sorry, the billing information on file could not be used for this payment. Please update your billing information." - Every month. No card declines, no authorizations. No matter how many times we inp