Sharing to DVD all my projects stops att 66 % - without error messages.

Sharing to DVD all my projects stops att 66 % - without error messages.
I'm a beginner in Final Cut Pro X. Not good at ¨computer terms¨ and computers so please take it easy when explaining.
My first three project was succesfully . (I then had no background image.)The fourth project (about 59 minutes) was at first successfully even with a background image. (But when I played the DVD on my DVD-player it stopped completely after 45 minutes, but went on when I tried to play it again, from the place where it stopped.) Then I replaced the background image with another and after that it stopped at 66 %. I read about the error -29 and made my image ¨smaller¨ but nothing happened. I also made the project shorter, about 57 minutes, nothing happened.
I tried a couple of completely new project from 2 – 20 minutes long – the same happened, it stopped at 66 %. (Read about deleting render files and tried that too without results.) I have a Mac OS X 10.8.3 Mountain Lion
Grateful for help after a week with problems. It’s a dancing project and people are waiting for the DVD…

"What finally got it to work for me was Share>DVD>Settings>Backround; added a small jpeg, then removed. For whatever reason, it seemed to jar Create Disk awake."
Using this idea I didn't even add or delete an image, just opened the the Background window and closed it again.
This made one stubborn Project work/burn even with some retimed clips in it.
This action must flick an internal ON switch somewhere????
It's something simple but annoying. I have no idea where to look.
At least with a couple of extra clicks it's now working as expected.
Annamatilda might try the same to confirm the above??
Al

Similar Messages

I have created a DVD via iMovie and burned several copies. When played the DVD's will stop and display a message SKIPPING DAMAGED Part. It is not the DVD. When trying to export the project, I get an error message.

I have created a DVD via iMovie and burned several copies. It is a large file. When played the some DVD's will stop and display a message SKIPPING DAMAGED Part but will not resume. Some work fine. It is not the DVD. I have burned from several batches. When trying to export the project, I get an error message with the following message: The project could not be prepared for publishing because an error occured (-108).

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

Photoshop CS4 stopped launching, no error message. Mac os 10.5.8 on PPC

Hi all,
I´m using Photoshop CS4 on this computer (Powerbook G4 PPC with OS 10.5.8, 10 GB HD free, 1.5 Gb Ram) without problems since 3 years ago.
2 days ago it stopped suddently working. It just doesn´t launch, without error message. On that days I was using an external USB hard disk that crashed...
Bridge runs ok but when I try to run Camera Raw, I get the message "Camera Raw editing is not enabled. Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature".
I already re-installed photoshop, uninstalled it and reinstalled, I tried also "App cleaner" and also I tried deleting all folders related to photoshop CS4 and reinstalling. I also repared disk permissions. I tried to use the Adobe CC Cleaner Tool but unfortunatly it doesn´t run on this machine.
Next step would be to format the machine, but I don´t want to do it unless it´s strictly necessary..
Any other ideas?
Thanks in advance!

Alas, Photoshop 7.x is not supported in Leopard (nor in Snow Leopard)—as far as I know.
What's worse, Photoshop 7.x is out of the upgrade path.

Weblogic server 7 sp4 stopped without error message

Hi all
im a begginer in weblogic server
ive installed the server (7 sp4 trial version) and the application work fine
but now i was trying to run a javascript that updating DB, it start working but after a while the weblogic server crashed and stop working without any message error
or exception (very weird).
does anybody know what can it be ?
why the server is crashes like that ?

I am curious to see that javascript. :P

Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.

Hi, I have updated to latest OS and now my Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.
I am running OS X 10.9.3 (13D65) on a 3.4 GHz Intel Core i5 iMac with 8 GB 1600 MHz DDR3
I've done a complete system re-install and also performed a targetted install of just the Canon Drivers - but all to no avail.
The printer is OK with regard ink-levels and is/was working fine. It will print out 'photocopies' independantly of the iMac. Additionally, from within the Print Queue I can view the ink-levels so there are comms between the iMac and the Canon - it's just that 'Print' seems to be off topic.
Can anyone help as I have to get a document out tonight
Many thanks in advance
S

Is that device desSystem Preferences - Print & Scan - Right click the printer and select Reset Printing System. DO NOT use any Canon software.
You did not advise how it is connected (USB- Wi-Fi- etc..) so it's a little difficult to assist with so little information.

Montan Lion "kick out" My usb memory sticks, external Hard drive, external DVD /cd drive and give me an error message "PowerPC applications are no longer supported."

Montan Lion "kick out" My usb memory sticks, external Hard drives, external DVD /cd drive and give me an error message "PowerPC applications are no longer supported."

It does not matter what I plug in to the USB post, the results is the same ...
U use external hard drives, memory sticks (new and my old memory sticks), I also use an external cd / dvd writer LG Portable Super Multy Drive
They all run for ± 1 min then it loose contact and I get error messages like, error code -8062 or PowerPC applications are no longer supported..... etc

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W

Itunes stopped working. error message ADiAdID

itunes stopped working. error message ADiAdID

Hello alanllc,
The article linked below provides some useful steps that can help get iTunes working again.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Try to force quit the mail app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works

TS1368 I was downloading some movies, (2 successful) and the 3rd movie- Adventures of Rin Tin, has stopped download with error message -.50???

I was downloading some movies, (2 successful) and the 3rd movie- Adventures of Rin Tin, has stopped download with error message -.50???

Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Imovie: I have just downloaded 'mavericks' and have installed all updates. I get an error message:Your computer's video card does not meet the minimum system requirements.

imovie: I have just downloaded 'mavericks' and have installed all updates. I get an error message:Your computer’s video card does not meet the minimum system requirements. What to do? Thanks for any help in advance.

I am not 100% sure this is the issue, but I saw a different thread about the ATI Radeon HD 2600 not being OpenCL compatible for another program and that a newer compatible graphics card would be required to solve the problem. I am getting the same message with my 2007 iMac 24".

How can I burn a dvd with a short movie file on my Imac so it will play on a dvd player? I keep getting an error message on my player "wrong disc type".

How can I burn a small movie file to a dvd that will play on a dvd player? I keep getting an error message "wrong type of disc" on my player. My burner is built in to my monitor. Will I have to buy software such as Toast to burn with?

I'm using the burner utility that came with the computer. The video is on I took with my small camera. I'm using a DVD-r disc and I drag the file to the disc icon then hit burn and everything seems ok. I can remove the disc and put it back in and see the file but if I put it in a DVD player it won't play, just get error message.

HT1926 Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?

Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

My iMovie '08 project stops exporting without notice.

Here's my dilemma.
I have a 40GB video that I've edited in iMovie '08 (my Mac is quite old but it still runs fine...).
I'm running the project through my external harddrive that has plenty of space - over 950 GB.
I exported it through Quicktime with the settings:
Movie --> AVI (DV/DVPRO - NTSC) --> FPS 29.97 --> Best quality
Audio set to 48000 Hz
I have tried it THREE different times, each with a slightly different setting such as audio compression settings or even FPS, and all three times, the project stops at 33-34 GB. There is no warning, just that when I check iMovie, it LOOKS like my export was complete, but when I check the actual file, it's incomplete. The initial exporting progress looks fine. The blue bar is moving steadily and the time remaining sounds correct. I have run through the project to see if there were any flaws that would contribute to the export being halted, but found nothing. So what am I doing wrong or why is iMovie giving me so much trouble?

Welcome to the  Discussion Forums
clip-2008-11-21 18; 37; 22 1 is not conventional nomenclature for imported clips, it seems as though this clip may have been imported twice and one of the copies deleted after it has been used in the project. Have you looked in the events folder for such a clip.

HT4367 just bought an apple tv and updated it and now the light won't stop flashing... even after i tried to restore via itunes and all i got was a unknown error message... hey apple you guys have a fix for this?

I just got an apple tv and it dosen't work at all. I tried to use the home share feature with my iMac and both devices don't see each other, yet they are o the same network. I am not using a apple router. I tried updating the apple tv to see if that would resolve the issue but now the status light just blinks rapidly. I tried using itunes restore it but all i get is an unknown error. So with all of this said what is the fix apple?

Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Sharing to DVD all my projects stops att 66 % - without error messages.

Similar Messages

Maybe you are looking for