Sharing video with iTunes help

I somehow shared a video I created through Final Cut Pro, shared it via iTunes and was able to load it on my iPods and iTouches....now it's not letting me do it.  I've looked over and over in forums and I get the same thing....iMovie>share>iTunes...except when I do this I keep getting "file name" was not copied because it cannot be played on this iPod.......I'm using iMovie 10.0.3 and iTunes 11.2.2

I somehow shared a video I created through Final Cut Pro, shared it via iTunes and was able to load it on my iPods and iTouches....now it's not letting me do it.  I've looked over and over in forums and I get the same thing....iMovie>share>iTunes...except when I do this I keep getting "file name" was not copied because it cannot be played on this iPod.......I'm using iMovie 10.0.3 and iTunes 11.2.2

Similar Messages

  • ITunes has stopped working.  Problem with iTunes Helper Module

    After i installed the 7.3.1 iTUNES update for my windows VISTA, i keep getting iTunes has stopped working, and a message saying there is a problem with iTunes Helper Module.. I've tried to re-install and everything.. Can anyone help me out?

    here you go
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: iTunesHelper.exe
    Application Version: 7.3.1.3
    Application Timestamp: 468d67e8
    Fault Module Name: QuickTimeStreamingAuthoring.qtx
    Fault Module Version: 7.2.0.240
    Fault Module Timestamp: 4684a83a
    Exception Code: c0000005
    Exception Offset: 00016c09
    OS Version: 6.0.6000.2.0.0.768.3
    Locale ID: 1033
    Additional Information 1: 18fe
    Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
    Additional Information 3: 4735
    Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
    Extra information about the problem
    Bucket ID: 466198587

  • I want to share my GB track with friends. I have "shared" it with iTunes, then what do I do?

    I don't know how to get my GB track to my friends, some of whom will have macs and some pcs. I have "shared" it with iTunes, but then what do I do? I know I can burn it to a cd, but I just want to send them the file. I've been told I can make it a podcast and post it on my Facebook page, but I don't know how to do this either! Basically, I want to be able to send a link to the track so that foks with either macs or pcs can listen to it. Thanks!

    What is your GarageBand version?
    In GarageBand '11 you have the option "Share > Send Podcast to iWeb". You will have to use the software you are using to create webpages to link to that file.
    In GarageBand 10.0 you can use the option "Share > SoundCloud".
    If you only want a place to put the song for download, get yourself a Dropbox, see:  Download Dropbox for Mac OS
    In GarageBand, use "Export Song to Disk".
    Then put the song into the "public" folder in your dropbox and send the link to your friends.

  • My new ipod nano will not synch with iTunes - help? ipod nano sw v1.0.2; iTunes sw v11.0.1; mac os x v10.7.4

    My new ipod nano will not synch with iTunes - help? ipod nano sw v1.0.2; iTunes sw v11.0.1; mac os x v10.7.4

    UPDATE
    i was able to connect and synced songs yesterday.
    but when i tried it again today. i cant connect again.
    i tried to disconnect and reconnect million times and i even dropped
    my iPOD and now it has some scratch and i hate it.

  • IPhone stuck in restore mode error 17 keeps coming up every time i try to restore with iTunes help?

    iPhone stuck in restore mode error 17 keeps coming up every time i try to restore with iTunes help?

    Hopefully this article will assist you:
    ≈≈≈≈≈≈
    http://support.apple.com/kb/TS3694
    ≈≈≈≈≈≈
    Please do reply with results/questions.

  • Help with mutiple files produced by sharing video to Itunes

    Hi All,
    As I continue to learn I am looking for some help. After importing DV video and then creating a movie in Imovie08 I shared the movie with Itunes. Looking through all the video files there are now two copies of everything on the drive..
    Copy #1 is in- movies/imovie/sharing/itunes/filename.mv4
    Copy #2 is in-music/itunes music/ movies/filename.mv4
    The questions are can I delete the one in the Itunes music file? what can I do to prevent this in the future?
    Thanks
    GE

    First most of the movies I am making are over 1gb so having two copies is not really an option as I will soon run out of space.
    Most people would agree and it is not necessary to do if both copies are "standalone" files. Yours are.
    when I checked get info for both files they were the same size so no reference smaller file as I have seen with the projects.
    This merely confimrs that both files are, indeed, "standalone" copies and that iTunes is operating with the default preference to physically copy imported/added files to your iTunes Library wherever that might be located.
    I was able to go into Itunes in the advanced and tell it not to copy to Itunes (thanks again) when sharing. On the most recent shared project this has eliminated the file in Itunes music but saved to the movie, imovie sharing, itunes ...File. When I open I tunes it did pick up the movie and sync with my apple TV. So far so good. My question now is why not leave like this?
    You can leave it like this and that is one of the things mentioned previosly when I cautioned you that in this mode you could not then delete the shared folder copy of your video. Basically you have to options.
    1) The first is to leave your standalone files physically in their original stored location and copy a "reference" pointer (like an alias) to iTunes. This method of operating keeps your iTunes Library relatively small but leaves your main "standalone" files scattered anywhere on any of your hard drives depending on how/where they were created/stored.
    2) The second is to use the iTunes default setting as it was, physically copy the files to the iTunes Library, and then delete the "sourcing" or "intermediate" file which is no longer needed. This work flow "consolidates" all of your video files to single, known area but means your iTunes Library can become quite large.
    The option you choose is up to you. I prefer the second option as I have an external 1 TB drive dedicated exclusively for use as my iTunes Library. In this manner all of my files are located in a known location and I can keep my internal start-up drive (and all other drives) relatively free of "clutter" by deleting video files from their source location as soon as I have imported them to iTunes. And, since I know where the file are located, I still maintain normal access to them for any "file" level operations (e.g., posting to any of my web sites/servers, sharing with friends/family via e-mail, QT Link files, and "reference" files, etc. Basically I use iTunes for the "physical" management of my videos for distribution to iPod, iPhone, and TV devices; iTunes, Front Row, and QT Player viewing; as well as, a central storage point for file level operations such as e-mail (standalone, reference, or QTL), site/server upload source, peer-to-peer distribution, etc. This works for me but may or may not suit another user's particular needs.
    One suggestion earlier was to delete the Movie/Imovie sharing file. While this makes sense I would have to manually transfer it in or share to both then delete it.
    The "sharing to iTunes" by iMovie is "automated." The deletion of extraneous files is not. Since iMovie does not know whether you are using iTunes manage your files physically, it cannot be pre-programmed to automatically delete the "shared" file without risking it will "orphan" the reference sent to/stored in iTunes. That is why the deletion is left to the user as a manual option.
    Why not leave the flow the way it is. Will I later have some issue with I tunes? Or is the potential to over write the information if I adjust the project the issue?
    As previously stated, you can use iTunes in this preference mode. While I doubt there would be any potential for accidental "overwites," there are other possibilities. Besides offending my sense of proper organization, there is the potential for such "scattered" files to be accidentally deleted in error. Also, there is always the possibility that someone might "move" the "standalone" file to a different location on the same or a different hard drive. In either instance, your iTunes file pointer would likely be "orphaned" and the content would no longer be availalable until or unless a valid path were restored. In addition, having files scattered all over your drives makes backing them up a bit of a chore. By consolidating all of my videos and music physically as I do, it is much easier to automatically "back them up" using another external drive and either Time Machine or other such software -- something to consider after doing all that work creating your files. What is best for you will depend on you specific work flows, needs, and concepts. There is no right or wrong here but merely what works best for you.

  • Sharing video in itunes with a P.C

    When trying to share video from itunes library with my partners laptop over wireless network only some of the movies will stream.... Same file type,
    Seems bigger the file less likely to work??? but not always the case?? Any ideas out there....

    Griffitxr6
    Suggest that you re-post/cross-post over in the following Discussions areas:
    iTunes for Mac Forums where the iTunes users hang out.
    AirPort Forums where the Airport(wireless) folks hang out.
    You may get responses over in the above forums.
    Good luck!

  • Sharing video from iTunes with p.c

    When trying to share video from itunes library with my partners laptop over wireless network only some of the movies will stream.... Same file type,
    Seems bigger the file less likely to work??? but not always the case?? Any ideas out there....

    Griffitxr6
    Suggest that you re-post/cross-post over in the following Discussions areas:
    iTunes for Mac Forums where the iTunes users hang out.
    AirPort Forums where the Airport(wireless) folks hang out.
    You may get responses over in the above forums.
    Good luck!

  • Sharing Video with another Mac

    I have several Video files of TV Shows downloaded with iTunes on my Power Mac G5 which is primary computer at home and is located in my study. The PM is connected to my home LAN and has AirPort. I want to play the videos on my 17" PowerBook via Airport connection or via its ethernet connection while lounging im family room where there's a nice log fire burning. Both computers are running iTunes 6.0.1 (3).
    So, I crank up iTunes on the Power Mac and ensure Music sharing is active and computer doesn't sleep.
    The Power Book has great AirPort signal strength in the Family Room but when I fire up iTunes on it all I can see in the Shared Music is MUSIC and NO video files show up at all. Why is this ? Why would videos be special cased and not shared ? The iTunes is all about music and I wonder if Video such as the TV Shows I've downloaded aren't considered music and therefore aren't shared.
    Can Video files be shared to another computer on same LAN just like music files can be ?
    I searched the Help but found no help on this matter.
    Any insights appreciated as I really would like to watch my video TV Shows in more comfort (ie Family Room) compared to my study location, and I don't want to have to copy the fairly large Video TV Show files across to my Power Book from Power Mac in order to watch them on the Power Book.

    Sharing does not work for purchased videos.
    As a workaround burn them to a DATA CD/DVD through iTunes and use the resulting disk(s) on your PB - Videos will play off the disk without importing them to your PB's iTunes Library.

  • Apple tv 3 does not see shared library with itunes 11.1.3$, apple tv 3 does not see shared library with itunes 11.1.3

    Hi,
    Since I have installed itunes 11.1.3 on my mybook with OS 10.6.8, my home shared library is not visible in the aoole tv 3 anymore.
    However, I can see it on another macbook with maverick installe on it.
    the apple tv 3 and the 2 macbooks are connected on the same networ. The apple tv3 and the mackbook with OS 10.6.8 are even directly connected with a a cable on the same router.
    Thanks for your help since I am 100% sure it came with this useless uograde of itunes.
    Thanks
    Jean-Pierre

    See this post: https://discussions.apple.com/message/23934504#23934504
    The short of it all is that iTunes and/or Mac OS X Mavericks has broken some functionality in IPv6 or how iTunes home sharing is using it (I am leaning towards the latter as the iTunes team has a very bad habit of releasing bugs in the past).
    Disabling IPv6 will also fix this issue with iTunes 11.1.2+ on Windows.

  • Sharing video in iTune

    I am using windows7 pc and setup iTune 10.5. I am not able to share any video which are recognized by the itune itself. I can transfer these  videos to iPad3 but not thru home sharing so that i can play it on Apple TV directly without bringing the iPad in picture.
    I am able to play music files (mp3) listed in the iTune on the apple TV only issue is with Videos.
    Any suggestions are welcome.

    Did you find an answer to this problem. I have exactly the same issue and it is very frustrating.
    I have validated the settings in my firewall and router so don't believe that is the cause. I have copied the mp4 file to my laptop, loaded into iTunes and it plays fine. I can play shared music files, and can see the shared video. I just can't play it !!!
    PC   Windows XP  

  • Manage video with iTunes on TC

    Hi,
    I recently buy a TC and I would like to copy my iTunes library on it
    For the music, it works perfectly but I have one issue with the videos
    When I try to change information about a file with iTunes, the file becomes corrupted and I can't play it anymore with iTunes or in the Finder with Quicktime or QuickView
    Has someone the same issue?
    Could you please help me?
    Message was edited by: sarsipius

    Hi Stephen:
    You are correct, Audio only files will stream to your AE. Video's will currently not stream to your AE.
    However, you can obtain a 3rd party application called Airfoil that will stream ANY audio to your AE and it can be found here: http://www.rogueamoeba.com/airfoil/

  • Converted Video With itunes???

    I put my Video onto itunes it wasn't able to be put onto my ipod so I Went to Adavanced>Covert Selection For iPod
    It converted it but now it has no auido ???

    Ohh okay. I was gonna say! But sorry, I can't help. I can't even establish an account with iTunes due to the whole Christmas overload.

  • Ipod Touch 4g will no longer sync with iTunes - help!!!

    I have an iPod Touch 4 and am using the latest version of iTunes 11.0.2.26 but can no longer get my ipod to sync with itunes.  When I click on Sync I get the message 'waiting for changes to be applied' then 'finished' but it does not sync.  I have completely restored my ipod and have uninstalled iTunes, Apple Update, Quicktime, Bonjour, Apple Mobile Device Support before reinstalling iTunes.  All my music in iTunes is from my own library rather than purchased from iTunes.  It all used to work fine and I feel I've exhausted all my knowledge in fixing this and need some assistance.  Can anyone help?

    Seems like you've tried the most important steps in troubleshooting, so that's good.
    What I'm wondering is: when you deinstalled iTunes and all those other things, did you do it in a specific order, according to http://support.apple.com/kb/HT1923 for windows Vista/windows 7 or http://support.apple.com/kb/HT1925  for windows XP  ? I don't see Apple Application Support in the list of components you deleted. I would recommend removing everything again in the specific order using the article you need and trying again to sync.
    Also: try creating another user account on your computer and syncing again, because sometimes software issues are user-wide.
    hope this helps, keep me posted
    Stijn
    Message was edited by: jesterwylde

  • HT5649 Our family has a shared computer with itune software. We have multiple apple devices and multiple itunes accounts. Can we share the computer and iTunes software to back up each apple device separately?

    How do multiple users with multiple devices share one computer with iTunes software to back up multiple devices and individual iTune libraries?

    Hi Goodguy147,
    Welcome to the Support Communities!
    The easiest way to have multiple users with multiple devices share a single computer is to create a User Account on your Windows PC for each person.  Each person should also have a unique Apple ID.  That will keep each individual's iTunes Library separate from the others and each individual can associate and backup several devices to their iTunes library. 
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    The article below is a troubleshooting article for Windows.  I'm just quoting the section from it that explains how to create user accounts:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717?viewlocale=nl_nl
    Follow the steps below to create a new user account in Windows Vista or Windows 7:
    Choose Start > Control Panel.
    Open "Add or remove user accounts." (If you're using the Classic view in Windows Vista, open "User Accounts," and then open "Manage another account.")
    Select "Create a new account" and follow the instructions to set up the account.
    Once you create the new account, choose     Start > Log Off.
    Log in to the new user account.
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    I hope this information helps ....
    - Judy

Maybe you are looking for

  • Windows update

    canot update windows error 80070490        and i have no vista disk  was moms computer and she died Model #: SR5413WM Product #: KJ393AA-ABA Serial #: [removed for privacy] Software Build #: 82NAv3PrA1 Service ID #: [removed for privacy] PCBRAND: Pre

  • Java user-defined function for mapping a complex structure

    All, Hope one of you can help me with this. I have a structure with over 15 fields and would like to concatenate all the fields into one target field and while I do this, I need to ensure that each field is padded with blanks as defined the data type

  • Weirdness; No bash, no sudo, no locks to click, but lotsa smbd

    I'm having a problem which is rendering my machine pretty unusable. After I first login in, everything is hunky dory. But after a few minutes programs just start getting unresponsive left right and centre. Symptoms also include that my terminal shell

  • SDO_TOPO_MAP.ADD_ISOLATED_NODE

    I find it difficult to understand why certain things work with Spatial and others won't! I tried different approaches with to add an isolated node. With the Java API this works fine: this.topomap.addIsolatedNode(p); where p is a Point2DD object. Well

  • Moving average price display is 0.00

    Hi gurus, Please assist on below. When i checked the MAP of raw material in MM03. it reflect stocks as 20,000 and total value as 98USD, while MAP is 0.00. When i do manual calculation, MAP should be 0.0049. seems like the MAP field is set to 2 decima