Sharing wireless connection with another powerbook g4...

i've got airport expressed configured with my g4 and it works fine.
however, my chum with another g4 clicks the name from the pull down window, enters the password (the one that Is the right one because it's in my keychain), and yet gets a wrong password error message.
any clues why?
thanks and happy holidays...

What type of wireless encryption is the AirPort Express (AX) configured to use?
What OS is his G4 running?
Does his G4 have an original AirPort card or an AirPort Extreme card?

Similar Messages

  • Sharing wireless connection with a PC?

    Hi all,
    Is it possible to share my wireless connnection with a PC that does not have wireless capability, perhaps via an ethernet connection? I have a crossover ethernet cable if that's required, as well as regular cables.
    Thanks in advance,
    Kittenmommy.

    Yes you can. Go to System prefs>sharing>internet
    Click on share your connection from and change it to airport if it is not already.
    Check off the type of connection you are going to use (firewire/ethernet) and then click start.
    Plug in your pc to the ethernet port with your crossover cable
    Make sure your firewalls are off. (pc and mac)
    You should be able to share. As far as the settings for the pc are concerned I have no idea. Yoou Should just be able to make a new connection using DCHP
    Good Luck

  • Sharing internet connection with another mac

    I have a 2.33 GHz Intel Core Duo iMac with 2 GB memory running Leopard 10.5.1 and connect to the internet through a cable modem into my ethernet port. I have internet sharing and Airport on. My daughter has an iMac G4 running 10.3.9 and gets her internet connection through my computer through an Airport connection. This was working well until I upgraded to Leopard and now she is unable to connect. Either my computer does not show up on her list of available networks or it will show up only briefly. When it does show and she tries to connect, she gets an error message stating there is a problem connecting. Never happened before he Leopard upgrade. Any ideas?

    Thanks again both...
    I think I have done exactly as you suggest. The USB modem is in the MBA USB port and connects to the mobile signal giving a good, fast connection - allowing my MBA to use safari and mail very well and with good download speeds. I go in to system preferences, internet and network, sharing and internet sharing in the "share connection from" I choose ZTEUSBModem. In the "to computers using" I tick Airport. In airport options I've tried 40 and 128 bit WEP. The ipad sees a wireless network and connects using the password I set in the internet sharing, airport options section. However, if you try to look at a web page, it just sits there for a bit but doesn't work. I tried my Iphone 4 last night and got the same result. Both work fine with my usual home wifi network, just can't get them to play nice with this USB mobile broadband modem....
    Thanks again for trying to help..

  • Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?

    Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?

    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
    MaggySimpson wrote:
    Hi! I sold my Iphone on ebay.
    Follow the instructions to remove a device you no longer have.
    From here  >  http://support.apple.com/kb/PH13695?viewlocale=en_US

  • I am not able to connect with another ipod via bluetooth can u pls help me

    i am not able to connect with another ipod via bluetooth can u pls help me

    Are yo trying to pair via an app that supports BT pairing?  If you are I would try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -Resetting network settings on the iPod: Settings>General>Reset>Reset Network Settings

  • New itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari HELP

    new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc

    My guess is that the security settings on your router and iPod do not match.
    For a test, change your router so there is no security.  See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod.

  • Lost wireless connection with mx860

    i lost my wireless connection with my mx860 - please help, i have tried it all
    thank you

    Did you solve your printer connection problem?  I have the same issue.  When I first turn the system on, it is connected.  But after a short time (a few minutes?) it loses connection between Mac and printer, even tho both are connected to my WIFI.  I have to turn the printer and and off to reconnect it to the Mac.  Very frustrating.  I have checked Netgear, Printer and Mac settings and can't find any explanation.

  • When i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this potion. Please give me some solution.

    when i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this option. Please give me some solution.

    Your iPhone can take multiple calls. If you answer your phone from one person or call someone and another call comes into you, you will hear a beep and if you pull your phone away from your ear, you will see that you can hang up the call with the 1st person or answer the 2nd call and then swap between the two.
    I have no idea what you mean by you calling someone who is already talking to someone. I've never been able to see on my iPhone that someone I'm calling is already talking to someone else.

  • HT1515 I've lost my wireless connection with light flashing amber, I've unplugged router and modem and pressed reset button on airport extreme

    Any suggestions on retreiving wireless connection with airport extreme, have unlugged power to all sources and pressed reset button on router, still amber flashing light

    Hello ebulloc,
    It sounds like you are getting the flashing amber colored light and cannot connect to the internet with it. According to this article:
    AirPort base stations: About AirPort base station status lights (LED)
    http://support.apple.com/kb/ht4600
    Flashing amber
    Startup is complete, but the Wi-Fi base station has detected a condition that requires your assistance. To resolve flashing amber status light conditions click here to learn more. Launch AirPort Utility to find out what conditions are being reported.
    This article should lead you to a resolution:
    Wi-Fi base station: Understanding and resolving a blinking amber status light
    http://support.apple.com/kb/TS1589
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I cant connect WITH another divice using Bluetooth

    I cant connect WITH another divice using Bluetooth

    The Bluetooth profiles for the iPhone to not support connecting to other devices. To check what they do support, see this support document. http://support.apple.com/kb/HT3647

  • Zyxel pk500z router/wireless modem loses wireless connectivity with imac

    My iMac loses wireless connectivity with wirelss internet from my Qwest  ZyXel PK5000Z modem/router intermittently. Have to constantly reboot the router to allow my Imac and other Mac notebooks nto reconnect to wireless internet connection.

    Suggest that you take one or more of Mac laptops down to the coffee place and connect there to check  your performance. If you get a good connection there....as I suspect you will...you know the Macs are functioning correctly.
    If the Macs perform well at the coffee place, you need to contact the ZyXel support folks for ideas on why the PK5000Z device is requiring constant restarts.
    As you might imagine....on an Apple support forum, we are not going to be able to provide much help with a ZyXel product.

  • If I restart an iPhone that is sharing a photostream with another account.. Will that account still have access to the stream?

    If I restart an iPhone that is sharing a photostream with another account.. Will that account still have access to the stream?

    Keep a backup from contacts (Address Book>File>Export>Address Book Archive) and Calendar (iCal>File>Export>iCal Archive) of your Mac and then press "replace".

  • Im not able to connect to app store with my apple id after i trying to logout and connect with another id. Please help.

    im not able to connect to app store with my apple id after i trying to logout and connect with another id. Please help.

    The app store has been down for over 8 hours. The following can be used to check on its current status: https://www.apple.com/support/systemstatus/

  • Lost wireless connection with Lexmark Printer

    MBPro with 10.8.1.  Lost my wireless connection with X6675 Lexmark printer.  How do I reestablish the connection.  My router is a Time Machine.

    Did you solve your printer connection problem?  I have the same issue.  When I first turn the system on, it is connected.  But after a short time (a few minutes?) it loses connection between Mac and printer, even tho both are connected to my WIFI.  I have to turn the printer and and off to reconnect it to the Mac.  Very frustrating.  I have checked Netgear, Printer and Mac settings and can't find any explanation.

  • Sharing internet connection with powerbook and nintendo wii through airport

    i have been trying to share my internet connection from my imac to my powerbook and nintendo wii. i've been unable to accomplish neither. i've opened the sharing preferences, chosen "share your connection from built in ethernet" which is how my imac is connected to the internet, and then chosen "to computers using airport". if i then set my airport options to automatic channel, encryption using 40 bit wep and set a 5 character password as it says if you "plan to share your internet connection with non-apple computers", (and then turn internet sharing on) shouldn't i be able to connect either/both my powerbook and my nintendo wii? or is it necessary to have some other piece of hardware or go through some other steps?
    thanks in advance for any help.

    I got a macbook for college and I had the same problem with connecting my Wii to the macbook's connection. But lo and behold, the internet's a wonderful place! I tried this out (http://www.macosxhints.com/article.php?story=20070514152251515) and it worked! I'm not sure about the powerbook bit though, sorry. Hope it works for you too.

Maybe you are looking for