Sharing with my desktop Windows XP PC

I'm able to view and access folders and files of my desktop PC from my Macbook. However when I try to play a song file that's on my desktop from my Macbook, the file is transferred. I don't want it transferred, I only want to play the file from my desktop. Is this possible or is there a better way to play songs from my Macbook in Itunes from files that are stored on my Windows PC.

It would involve a dangerous change in your iTunes settings on your Mac, like setting the iTunes folder via a SymLink to point to the folder on the PC.
The reason I say dangerous is, I believe if the PC were not available, iTunes might never launch, spinning Beach Ball, Freeze, Force Quit, etc.... but I don't know that for a fact... just surmising.
Man, did they ever screw up SoundJam when they converted it to iTunes!
You could just play songs from any folder anywhere with a click or two with Soundjam.

Similar Messages

External HDD to be shared with Mac and Windows XP

I wish to share an external HDD via firewire/USB between an ibook G4 on OSX 10.3.9 and Windows XP. Apart from using FAT32 and having partitions for each OS just in case can anyone share any risks considerations I need to be aware of? I intend on having a generic 320Gb Seagate drive installed into an aluminium box but for some reason Lacie seem to be particularly good with Mac's and I can't ascertain why.
ibook G4 Mac OS X (10.3.9) Acer Windows XP

There appears to be some misunderstanding about what systems can read or write what hard drives.
OS X can read and write HPS+ and FAT32 formatted drives, and can read, but not write to NTFS drives. Windows can read and write NTFS and FAT32 drives, and cannot read nor write HPS+ drives. Fresh out of the box the only read/write file sharing is via FAT32 drives.
There are reasonable methods for expanding this capability.
(1) Windows can be given the ability to read and write HPS+ drives by installing MacDrive 6 on the Windows machine. As far as I know there is no software available which gives OS X the ability to read and write NTFS drives - - maybe it exists or is under develpment somewhere.
(2) Both OSX and Windows can read/write files that are on a networked file server regardless of the file system used by that file server. The server hides its underlying file system from clients. Just connecting a network capable HDD to a router is NOT the same thing as having a file server on the network - - the same basic file limitations still exist.

Sharing with Macs and Windows

I am trying to access the files on my Windows machine. I try connecting and a message comes up that reads
"The Finder cannot complete the operation because some data in smb://''''''' could not be read or written."
(Error Code -36)

I am trying to access the files on my Windows
machine. I try connecting and a message comes up that
reads
"The Finder cannot complete the operation because
some data in smb://''''''' could not be read or
written."
(Error Code -36)
This is an authentication error usually caused by the XP PC not having a password and/or the XP firewall blocking the file sharing.
Sharing files between an XP PC and a Mac running OS 10.4.x
http://www.ifelix.co.uk/tech/3020.html
iFelix

Support for Desktop Sharing with Jabber Windows and without CSF

Hi,
is there a official Cisco say, that Desktop Sharing with Jabber is only supported with the Desktop Softphone mode (CSF-Device)?
Somebody has a link? Or is it supported with the normal deskphone? Which version of jabber and CUP&IM?

Hi
I can confirm that Cisco Jabber 10.5 supports desktop sharing with both CSF and Desktop mode. It also supports Conference desktop sharing, and desktop sharing through regular chat (No active call)
We are running CUCM 9.1 and IM/Presence 9.1, so our platform is not the newest.
You will need the new media driver as well, Cisco Media Services Interface 4.1.2.8049.
Here is a link to Cisco's release document for 10.5
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/10_5/rn/JABW_BK_J559CFFB_00_jabber-windows-release-notes-10-5/JABW_BK_J559CFFB_00_jabber-windows-release-notes-10-5_chapter_00.html

Wired (Ethernet) Mac Mini file sharing with wireless Windows 7 PC

Hi Guys,
I'm new to the Mac experience having just bought a Mac Mini so be gentle please. I have the Mini connected to my router & internet the via Cat5 Ethernet cable. I also have a Dell Notebook running Windows 7 connecting wirelessly to that router. How do I get these 2 power-houses of the home computer industry to share files?

Well with 10.6 and windows file sharing follow these steps:
1. First in windows 7 go to Control Panel. Then in the File sharing panel don't do a Home Group because this is for Windows 7 networks ONLY!. Use the Advanced file sharing to share files.
2. While still on Windows 7 go to Control Panel-System and get the workgroup name or change it to you want. Also while still in 7 click on the start button in the search box type: cmd . The command line will come up and on the first line type: ipconfig /all . Then write down the Windows 7 IP address (you will need to know this info).
3. Now in 10.6.x open System Preferences->Network pane, Advanced button. In the drop-down click on the WINS tab and put in the name of the Workgroup name and at the bottom of the pane hit the + button and add the IP address of the Windows 7 machine.
4. Now click on OS X desktop and click on the Go menu name. In the drop-down select "Connect to Server" . When the panel opens up put in your Windows 7 IP address and connect. The keyboard shortcut for the Connect to Server is the Command key+k. Then log in the Windows 7 with the Windows 7 username and password.
Any questions?
One more thing: read the how to File Sharing: Snow Leopard And Windows 7.
Message was edited by: satcomer

Remove little window "my computer" screen when screen sharing with iChat?

Anyone know if it is possible to remove or minimize the little window when screen sharing with iChat? if you try to drag it off the screen, it just pops back. It does not seem possible to close it without getting booted out of the screen sharing.

As the "little Screen" is either your Desktop or the other Desktop depending which you have as the current one you are working in it seems silly to have no access to changing back and forth.
But as you say or rather imply it does sometimes occupy the space you want someone at the other end to see and you can not access that part of the screen or if the other end is trying to show you something it can be hidden my your own desktop.
AT present Not Even Chax does what you want.
7:31 PM Monday; March 10, 2008

Remote desktop and screen sharing with RMI

Iam developing an application for screen sharing and remote desktop
the problem is a performance problem
in the screen sharing application server screen is captured and the image is sent to all connected clients through rmi connection
I used JPEGImageEncoder to compress the image and convert it to array of bytes
then zipped the resulted array using deflater.
the result is sent through rmi connection
the performance is so poor
i tried JMF but the performance is worse
i am thinking of a way to send the server screen only if it is changed but i don't know how
anyone could help me to enhance it with acceptable quality for the image
thanks

As you said, you need to only send the changes over the line.
Java can not tell you what has changed, so you need to either write some JNI, or do a check on the current image, with the last image. (this would eat quite a bit of CPU time on the server).
It might be worth looking at the source for VNC, and other simler products.
The simpliest solution would be to split the image into blocks of x by y pixels, then do a pixel-by-pixel check on that block, and only send the block if it has changed.
Next thing to think about is scrapping RMI, and using raw sockets. RMI has a fair sized overhead.
Zipping a JPEG is unlikely to have any effect. A JPEG is already compressed.
You might want to look at a lossless compression format, like PNG, as the JPEG will have articles. This might be acceptable. If so, changing the compression ratio of the JPEG might be an option.
Finally, the bottle neck might be the call to Robot.createScreenCapture. This is not the fastest method.

Printer sharing with Windows 7 64 bit

I am trying to install an HP laserjet 1320 printer connected to a Windows XP Pro 32 bit machine. Windows 7 goes out and tries to find the approriate drivers but reports that a suiable driver could not be found. The printer installs fine when connected to the Windows 7 machine via USB port. Downloaded and unzipeed the Universal print driver HP's site says is the correct driver - no luck. Tried installing using the share name - same error message.

I found that I had issues with getting all of these to work - individually. I have an XPPro (32) pc trying to print to Win7Ultimate printer - printer is shared with all settings wide open, works great with another 7 or Vista machine, but same errors
as above for XP. I got it to work an old way, and then the "local port" way worked. I don't really know why as yet, but I am investigating.
My Solution -
1. As stated in other posts, install the printer locally on the XP machine. Make sure that it prints.
2. Connect the printer to the 7 machine, print a test, then change the file and print sharing options to "yes". I also installed the "Universal Driver" for my printer - HP1200 Laserjet.
3. Make sure that the Network type that the 7 machine sees is "Work" or "Home", not "Public". - I don't know if this really did anything or not, but I did make the change - mine thought the network was "Public".
4. Go back to the XP machine, if you get errors when you add the "Local Port" as suggested, then do this -
Warning Old Dos Trick -
- Open a Command Prompt, then type (without quotes) "net use Lpt1 \\COMPUTERNAME\PRINTERSHARE " - where "computername" is the name of the computer and sharename is the shared name of the printer
on that computer.
- you SHOULD see "command completed successfully", if not check to make sure that you have rights on the 7 machine. Now you should be able to print a test page to the printer. CAUTION - it took awhile for the changes to
take, so you may have the hourglass looking at you for a few minutes. - Once you reboot this will not work as the connection is just for that session.
To explain: this command is the dos version of what happens when you re-route output to a different destination - thus any traffic to LPT1 goes to \\computername\sharename.
5. After this worked, I then could add the "local port", as detailed earlier and had no errors.
Hope this helps someone else!

Printer Sharing and Windows Sharing with Windows Vista

Today I tired setting up a printer sharing network over my linksys wireless router. I turned the printer sharing on and the windows sharing on my mac. Then I launched my notebook with vista on it and installed Bonjour for Windows 1.0.3. Once the installation finished I ran the wizard and installed the shared Epson Stylus Photo 1280 printer.
Once I finished the wizard I gave the printer a go.
I tried printing a word document on my Vista machine using the new wireless set up and nothing happens the printer queue gains the document spools it and then it's gone. Then, I tried using Vistas Sharing set up. After setting up another printer icon (the same printer). When I go to print I get an error message.
Also when I try accessing my shared folder from my vista machine. I use my Username and password for the login. The computer responds that my Mac Mini's username and password is incorrect. Thus, I cannot fileshare between by Mac Mini and my Vista Laptop
What can I do to get my printer sharing and my windows sharing set up to work.
(also, my Epson Stylus Photo 1280 Printer is hooked up to my mac mini through USB).
Please respond
Thank you

Hello Joe,
I failed the login “connection to server with username and password not possible - Failure 256”
Some cures here...
http://archive.macfixitforums.com/ubbthreads.php/ubb/showflat/Number/691131/site _id/1#import
One more way to overcome stubborn printing to a Windows® printer from a Mac...
http://iharder.sourceforge.net/current/macosx/winmacprinter/
http://docs.info.apple.com/article.html?artnum=301397
iFelix...
http://www.ifelix.co.uk/tech/3020.html
http://www.ifelix.co.uk/tech/windowsxp.html
I did not succeed using the PC’s name - even though the workgroup is set correctly.
Might try Bonjour for Windows...
http://www.apple.com/downloads/macosx/apple/windows/bonjourforwindows.html
Which may also cure the Printer Sharing problem.
Oh. make sure Printer Sharing IS NOT set on the Mac, if it is turn it off & reboot.

Wireless printer sharing with windows 7 and vista operating systems.

hello can anyone help me?
i have a new HP pc with windows 7 OS, and have an epson PX710W 3in1 printer.
i want to connect a laptop with vista OS to share the printer (wireless set up).
the pc will print documents ok via wireless link, but when i power up the laptop it appears to inhibit the printing function (document will not print).
i have set up file/ print sharing but there is the problem. it appears to me that sharing is only possible between pc,s etc with windows 7 OS via the homegroup set up. Has anyone encountered this problem at all, has anyone any ideas? or is it a configuration problem that i'm not aware of?

I found that I had issues with getting all of these to work - individually. I have an XPPro (32) pc trying to print to Win7Ultimate printer - printer is shared with all settings wide open, works great with another 7 or Vista machine, but same errors
as above for XP. I got it to work an old way, and then the "local port" way worked. I don't really know why as yet, but I am investigating.
My Solution -
1. As stated in other posts, install the printer locally on the XP machine. Make sure that it prints.
2. Connect the printer to the 7 machine, print a test, then change the file and print sharing options to "yes". I also installed the "Universal Driver" for my printer - HP1200 Laserjet.
3. Make sure that the Network type that the 7 machine sees is "Work" or "Home", not "Public". - I don't know if this really did anything or not, but I did make the change - mine thought the network was "Public".
4. Go back to the XP machine, if you get errors when you add the "Local Port" as suggested, then do this -
Warning Old Dos Trick -
- Open a Command Prompt, then type (without quotes) "net use Lpt1 \\COMPUTERNAME\PRINTERSHARE " - where "computername" is the name of the computer and sharename is the shared name of the printer
on that computer.
- you SHOULD see "command completed successfully", if not check to make sure that you have rights on the 7 machine. Now you should be able to print a test page to the printer. CAUTION - it took awhile for the changes to
take, so you may have the hourglass looking at you for a few minutes. - Once you reboot this will not work as the connection is just for that session.
To explain: this command is the dos version of what happens when you re-route output to a different destination - thus any traffic to LPT1 goes to \\computername\sharename.
5. After this worked, I then could add the "local port", as detailed earlier and had no errors.
Hope this helps someone else!

Problem with Remote Desktop on iPad 2 and windows 8.1 pro

I downloaded the Microsoft Remote Desktop app from the App Store on my iPad 2. I typed in the IP address for my windows 8.1 pro computer on my iPad 2 in school to try connecting to my windows 8.1 pro computer at home. I'm having
a hard time doing it. Do I need a rd remote gateway to access my computer from outside my local network. If so, how do I find my gateway server name? Also, I saw somewhere that I have to press accept in a pop up message on the computer your trying to connect
to. Is this true? No one is home during the day and my iPad 2 has to stay in school. Can you please give me a step by step guide with photos to help me connect to my windows 8.1 pro computer from my iPad 2 from school, which is of course outside my local network.

Hi,
Please refer to the document below for the procedure to use Microsoft Remote Desktop APP of IOS APP store.
Getting Started with Remote Desktop Client on iOS:
http://technet.microsoft.com/en-us/library/dn473013.aspx
Roger Lu
TechNet Community Support

File Sharing With Windows

Right this is annoying the **** out of me. I've enabled everything I should on my Mac to get it sharing with windows. I'm convinced I've broke my OSX, but there's clearly something I've missed which is stopping this from working that maybes someone else can see! So here we go
Gone to system preferences, sharing
-> Ticked file sharing
-> Ticked share files over SMB
-> Ticked my user
-> Added what I want to share and gave permission to everyone as read/write for public folder.
-> Gone to network preferences and setup the WINS server to the same group as my windows PC
Just got the standard apple firewall running on my mac. I've tried disabling this and letting anything through.
The problem im having is my windows laptop cant see my mac quite often. Sometimes it can, and when it can see my mac it only displays shared printers rather than any of my shared folders. The problem here is that I dont have any printers on my mac, and printer sharing is not enabled.
Any idea why this isnt working? I've disabled windows firewall/any other firewall on my windows laptop. My windows laptop can happily access the FTP and HTTP on my Mac. Just has issues file sharing.
I actually had this working a while ago for a day, then it's never worked since. I cant for the **** of it figure out why. I've gone through loads of tutorials to see if i've missed things. Some things have even told me to change a registry file in windows, which I've done to no success.
Cheers in advance!
Message was edited by: Visor
Message was edited by: Visor

Any advice guys?

Lion SMB File Sharing with Windows 7 stops working after reboot

I'm running my macmini with lion 10.7.1. I have switched on File Sharing and ticked 'Share files and folders using SMB (Windows)' and ticked my user account. Using the same account name and password on windows and I can access the shares on the macmini fine.
Soon as I reboot the macmini the sharing stops working and Windows just prompts for a username and password. If I disable and enable file sharing again on the macmini then windows can access it again just fine, reboot the mac and it stops again, is this a bug in Lion or have I not got it setup correctly?

Whatever the issue is, it's still happening for me in 10.7.2

On my windows 7 machine, itunes won't connect home sharing with apple tv

On my windows 7 machine, itunes won't connect home sharing with my apple tv. This problem started about two itunes updates ago. Any thoughts?

Try a search of the forums or the "More Like This" section to the right.
Also might have better luck posting to the Apple TV forum.

Do I have to give up Palm Desktop 4.2 with my new Windows 7 64-bit Computer?

Just got a new Windows 7, 64-bit computer. I am completely dependent on my Palm Desktop 4.2 software and don't want to give it up. However, I was told by an online chat rep. that I needed a bluetooth connection to hot synch my Centro with my new computer. Ran out and bought it, but it seems that on Palm Desktop v. 4.2 there is no option to hot synch via bluetooth...obviously, the program is too old.
Does this mean I have to "upgrade" to Palm Desktop 6.2? Yuk! This version stinks! 4.2 is the reason I'm on my 3rd Palm product. Is there a different calendar software that you can hot synch with a desktop calendar? Has anyone had any success with this?
Any advice would be appreciated!

No windows 7 64 bit USB driver, PALM is SO OVER.
Sad I love my CENTRO on SPRINT. I have 3 on my account and 2 7xx. USB Bluetooth dongles are cheap but annoyingly flakey because of the crummy software that comes with them AND will they work with PTunes? It didn't when I tried Bluetooth on Windows XP.
At the END of the day, if PALM is not committed enough to put out a windows 7 64 bit USB driver how can I be committed to this phone. Looks like Android is getting help from palm, although I don't want to deal with learning a new phone.
If you find a good USB Bluetooth dongle device that works let us know here.
By the way, this ANNOYING chat board says me first name is an OBSCENE word. PALM is insulting their loyal customer base. I'll see if the Android board will let me use my first name. :-)
Thanks,
**bleep**

Sharing with my desktop Windows XP PC

Similar Messages

Maybe you are looking for