Sharp Aquos LCD

Does anyone know if Apple computers/labtops are compatible with the Sharp LCDs?

the vga port on tv can only accept certain vga frequency (i.e 50 hz or 60 hz, etc), so make sure you play around with the settings.
the simple vga to s-video converter won't work, you would need to get a vga to s-video converter box, costs around 50 USD on Amazon. 
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • Progressive Scan mode (DVD on Sharp Aquos LCD)

    I want to use the Mac Mini as a DVD player on my 32" Sharp Aquos. Does anyone know if the Mac Mini supports progressive scan mode?
    Also, has anyone run into issues connecting to the 32" Sharp Aquos LCD TV?
    Thanks
    Curt

    Along the lines of progressive scan vs. interlaced... I've noticed while playing video from Quicktime I can make a selection to pick which one I prefer. I've got a project that I created in iMovie and I notice that if I were to share (export) a clip using the expert settings I can chose whether it is interlaced or progressive. However, when accessing those same .mov files in iDVD I don't see any settings that indicate whether the final DVD will be interlaced or progressive. From the looks of the footage viewing it on my computer it looks like it is interlaced. How can I create a DVD with this iMovie footage that ends up displaying as progressive?
    thanks for any advice.
    -charlene

  • Trouble using my sharp aquos as a display for my PB

    I have a 1 GHz Powerbook G4 with 512 MB DDR SDRAM running Mac OS X 10.3.9. I have recently purchased a 32" sharp aquos LCD Television with the intent of being able to hook up my power book. The sharp instruction manual tells me to hook it up with a DVI cable (as well as a mini jack for sound). I purchased a mini dvi to dvi converter thingy and connected to the LCD (I have not used a mini jack since I thought that would only affect the sound and, for now, I just want the picture).
    There is a compatability chart in the sharp manual that gives me three mac options; 1) 13" VGA, 2) 16" SVGA, 3) 19" XGA. I do not know what these are refering to so I chose the 13 " option. It tells me to adjust my resolution to 640x480, Horizontal Frequecy (which I cannot find) to 34.9 kHz and vertical frequency to 67 Hz.
    Although my power book recognizes the sharp LCD, I get no image on the television. I called sharp customer service and, aside from verifieing that I was using the correct input channel, they couldnt help me.
    I am about a millimeter from returning the television unless someone can help me!
    Thanks.

    I have the Sharp Aquos LC32D7U and have tried connecting my 15" PowerBook G4 1.5 GHz to it using a DVI cable. I don't think I got a cable with a mini DVI to DVI converter--the plug is the same on both ends and fits my PB and the Sharp LCD either way. Anyway, I'm having the same trouble as you. My PB recognizes the Sharp LCD as being connected, but the Sharp displays a black screen. The input info on the Sharp LCD screen shows "---X---" in the upper right corner where I'd expect some sort of connection information and below that "--Hz" as though nothing is connected. Incidentally the sound works fine through the Sharp using a stereo mini plug. I've tried adjusting all my monitor settings from resolution to Hz and have tried mirroring and not mirroring. Nothing works, although my PB clearly thinks it's displaying on the Sharp because, when mirroring is off, I cannot access the Sharp LCD video setup options since they're displayed on the Sharp LCD where I can't see them.
    I wonder if it would be possible to use a DVI-HDMI adaptor and connect the PB to the HDMI input. Have you tried that? I'll be curious to hear how it works, or if you have any other ideas. It certainly is frustrating. If I come up with any solutions, I'll be sure to let you know.
    I'm keeping my Aquos regardless of whether or not I get it to work with my PB, since it fits perfectly into a wall unit I'm housing it in and it's primarily used as a tv anyway.

  • Getting full 1080p to a Sharp Aquos 42'' HD LCD TV

    Okay, I've been struggling and struggling with this one for a good month or two and I have pretty much use up all my lifelines except the apple forums
    I have a Sharp Aquos 42'' LCD HDTV that is 1080p capable, and has 2 HDMI inputs. I have been using my 17'' Powerbook G4 via a DVI > HDMI cable and it works great EXCEPT that it is displaying the desktop with about an inch black border around the entire screen. I have heard of trying to tweak the timing settings within a program SwitchResX, and have read some other threads about other people successfully being able to get a 1080p full screen with their Sharp Aquos (45'') as well. I don't know the exact settings I need for my particular TV and I was hoping to get some answers here.
    sincerly,
    Alex

    Now I have 1080p resolution on my 37"" which exactly matches the tv screen, whow what a fantastic picture. The solution is:
    * Press "Wide modes" button on the remote control and select "Underscan" for the selected HDMI input source.
    * Open the Mac preferences, select displays, in the sharp display select options, then check the overscan checkbox.
    * Install SwitchResX and select a 1080 resolution without interlace.
    Hope this works on a 42" Sharp lcd too.
    Gerd

  • Sharp AQUOS 32" LCD TV

    We purchased a Sharp AQUOS 32" LCD TV, model # LC32D40U. The date purchased was June 15, 2006 at the Best Buy in Janesville, Wisconsin. We now reside in Old Town, ME. This TV was defective from the start, however, my husband was diagnosed with Mantle Cell Lymphoma and went through a year of treatment, including a stem cell transplant. 10 days before his diagnosis we had an accepted offer on this home in Maine. So much has occurred that we never had a chance to get the TV in for repair. We dealt with it not working properly. It would go on, run for a while, then the screen would go black. I'd turn it off and tap it, then turn it back on and it would work for hours. It has progressively worsened to the point of no picture anymore. Can we do anything although it has been almost 3 years now? In these 3 years, we had to move to Maine, then  my husband went through surgery, my brother is dying from colorectal cancer, my daughter in law just lost her parents in a serious auto accident, and so many other horrible things have occurred. Can someone help us with this? Thank you! BTW, we did take it into our local store, but I'm praying the outcome will be "no charge!" The young man that took our TV claimed he would do what he could for us. Very polite!!!

    If your TV and Laptop both have the VGA socket on i.e it looks the same at both ends, then any VGA monitor cable will do the job, no need for any extras. Easiest thing is to do if possible is pinch a cable off sometning else to test. These cables are not a lot of money so don't be foolded into buying one of those super premium pro cables, it's really not necessary.
    Audio wise you only have the headphone jack out on the laptop, and the tv probably has component in (RCA sockets) thats the norm anyway so you need to get a Phono to 3.5mm Stereo Jack lead of sufficint length.
    something like this I'd imagine http://www.maplin.co.uk/module.aspx?ModuleNo=31700&doy=18m8 (sorry its a uk site)
    Or if you have a Stereo system especially a surround one then you can rig the audio to that which will be even better
    You will need to check the back of the TV or the manual to confirm this. If you took the manual and possibly the laptop into any decent TV store they should be able to sort it out.

  • Best settings for Sharp Aquos 32" LCD

    Hi all,
    I have a MBP 1.83 and just hooked it up to my Sharp 32" LCD and I am underwhelmed by the outcome. I am switching back to mac after 15 years and have been using a windows machine attached to this display with better results. Is there a way to tweak the settings to get better results?
    Also, what do you recommend for creating a new using user for using each profile? I would like to have all of my files available for both users, just the settings separate (dock size, font size, etc.).
    Thanks in advance!
    Mark
    MacBook Pro 1.83   Mac OS X (10.4.5)  

    What is the native resolution of the Sharp Display? For optimal quality you should set your mac to output at the Native resolution of the Sharp LCD (this is true of any LCD). See System Preferences> Display Preferences to change screen resolution. Also make sure your sharp's built in screen settings (not the ones you adjust from the Macs display preferences) are set properly. For example, through the remote you can choose settings for "PC", "Movie", "TV", etc. I usually find that the Sharps "PC" default settings are very bad... too much contrast, bad color reproduction. so I have to manually tweak them (also done through the remote). Best of luck. I am confident you can get an excellent image out of your Sharp.
    Regarding creating multiple user accounts, I highly recommend you start a separate post on that topic since it is so unrelated to your sharp lcd issue. I am confident you will get lots of responses to a post about that. Try to provide as much detail as you can about what you want, and why you think you need multiple user accounts (for example, "I want to share music, but I don't want my kids mucking about with my files" )... and you might want to consider posting that thread in the OS X topic area (here: http://discussions.apple.com/forum.jspa?forumID=752)
    But for the record, I really try to avoid setting up multiple user accounts if possible because it is a pain to share iTunes music and movies (though its possible). I think the only reason to set up multiple users is when you have kids and you want to prevent them from messing up your own settings and files. If it is two adults sharing the same computer, I think it is best to just compromise on how you configure the doc, and to agree to save files in different folders inside documents. work arounds for email can also be done from one acount. best of luck

  • LCD Advice / Sharp Aquos "Banding"

    Trying to decided b/w:   Toshiba Regza 46XV645U and Sharp Aquos LC46D85U.
    I've heard about color "banding" issues on the Sharp.  Has this been corrected, or is it still an issue.
    What's the 411 on Toshiba?  Any known issues?  I haven't read too many reviews on it, but what I have read has been positive.

    I don't know if my model of Sharp is the Sharp you listed, but I have not seen any sort of color banding in my 46" AQUOS.
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • DVI or VGA Connection For Sharp Aquos??

    I've got an older Sharp Aquos, specifically the LC37G4U. Previously owned a Mini G4, 1.42 GHZ. The best I could do imagewise was with a DVI connection and the Aquos and Mini set to 1280 x 768. This resulted in an image cropping of approximately 1/2 inch on the right and left sides of the screen. I lived with it for a few years. I recently upgraded with a sweet Mini Duo Core 1.83 GHZ, 2 Gig of RAM, 7,500 RPM Seagate HD, etc. The computer is great, but with the DVI connection, it appears to default to the old 1280 x 768 setting, with the same exact image cropping. The maximum resolution on the LCD is 1366 X 768, and I'd like to attempt to do better as far as the cropping goes. Has anyone out there tried the VGA connection alternative? Or if anyone has any ideas, I would be forever in your debt. Thanks All!
    Mac MIni Duo Core 1.83Ghz, 2 gig, etc.   Mac OS X (10.4.9)  

    I have a sharp lcd tv as well, and as far as I know, if you connect the mini to it using DVI (you shouldn't really use anything else) the mini will default to the tv's resolution. I swap my mini from monitor to tele depending on what I'm using it for, and everytime it automatically fixes it's display settings to match whatever is connected to it. Hopefully this is the case for you too, try it out.

  • Sharp 32" LCD HDTV or should we go with Samsung LCD HDTV?

    Hi-
    I'd like some opinions please.
    We are in the market for a 32" flat screen tv - our first- and we cannot decide between the Samsung 32" 1080p Flat Panel LCD HDTV or the Sharp-AQUOS 32" 1080p Flat Panel LCD HDTV?
    Consumer Reports has not yet rated the Sharp per my brother but he said Samsung ranked #1.
    Any thoughts out there?
    Thanks-
    Peanut
    Message Edited by peanut on 01-13-2009 06:57 PM

    THAT I find surprising, especially considered that 5-6 years ago Sharp commanded something like 60-70% of the OEM LCD panel market.  That is, they were the original manufacturer of the screens used in products branded by a LOT of other people - they didn't sell very much under their own name.  I am positive that not too long ago they were the #1 or #2 manufacturer of LCD panels (not fully assembled units, but the source of panels to other manufacturers) in the world.
    Similarly, I'd be extremely shocked for Sharp to be using another manufacturer's "B" screens when Sharp manufactures their own panels.
    Also, Korean companies like Samsung have historically had a worse quality track record than Japanese companies like Sharp, although recently (the past 5-10 years), the Korean companies have made SIGNIFICANT improvements in quality control.
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • Duo or Solo for a Sharp Aquos

    OK, time to get down to brass tax. Ive been reading around here for awhile and its time to pull the trigger on a Mini.
    I need a Mini capable of running 1366 X 768 to my Sharp Aquos 37 inch LCD. I know I will have to use a third party app to get the resolution exact but my question is which setup will work best.
    Im deciding between at Core Solo with 1 Gig RAM and a Core Duo with 512 MB RAM, money being the main obstacle.
    I plan to connect my 250G Lacie external drive to the Mini for streaming music and video (HD included) to my entertainment system. And I am going to either use the DVI or HDMI connection on the Sharp.
    Other than that, the Mini will be used for surfing, e-mail, etc. Nothing too intensive. I realize that a Duo with 1Gig would be optimal, but I cant quite spend that much right now. What will I lose performance wise if I dont have the Duo, I am mainly concerned with video quality for HD.

    I need a Mini capable of running 1366 X 768 to my Sharp Aquos
    37 inch LCD. I know I will have to use a third party app to
    get the resolution exact but my question is which setup will
    work best.
    Straight from the mini's spec page
    Graphics and Video Support
    Intel GMA950 graphics processor with 64MB of DDR2 SDRAM shared with main memory1
    DVI video output to support digital resolutions up to 1920 by 1200 pixels; supports 20-inch Apple Cinema Display and 23-inch Apple Cinema HD Display; supports coherent digital displays up to 154MHz; supports noncoherent digital displays up to 135MHz
    VGA video output (using included adapter) to support analog resolutions up to 1920 by 1080 pixels
    S-video and composite video output to connect directly to a TV or projector (using Apple DVI to Video Adapter, sold separately)
    So it seems it can suport the resolution but being a 37 inch lcd, I'm not sure there's other hinderences you may incur
    Mike
    Mini G5 PowerMac G4 PowerBook Mac SE   Mac OS X (10.4.6)  

  • What cable/adapter do I need to connect my MacBook Pro to a Sharp Aquos TV?

    What cable/adapter do I need to connect my MacBook Pro to a Sharp Aquos TV?
    I want to watch videos on youtube or read articles on my laptop, and I want a cable/adapter that will hook up the Macbook to the TV and display the webpage that is on the laptop.

    Of course it doesn't. But you can buy an adaptor from HDMI to the Mini-DisplayPort port on the computer.

  • Using a DVI HDMI cable with my Sharp Aquos LC-52D62U 1080p

    Hello
    I have a Mac Mini Intel proc with 4GB RAM (max RAM).
    I'm trying to get it to work with my Sharp Aquos LC-52D62U 52" TV. The TV supports 1080p native, and the mini has had no issues connecting to this TV before. I just re-installed 10.6 (with all updates) and it does not want to connect.
    I have a direct DVI > HDMI cable going from the Mini directly to the back of the TV. I tested other devices on that TV input and the TV works fine. I'm also convinced that the cable is fine as it worked before the re-install of the system.
    I can see the Mac Mini using screen sharing on my Mac Pro, so I can make changes to the configuration over the network. The screen settings on the Mini are set to "1080p (Television)" just like they were when it all worked fine. But the TV screen is black. No picture at all.
    What can I do about this?
    Thanks,
    -----------S

    Hello Mac Mini world. I tried to connect my new Mac Mini to a 2 year old 32" Insignia Flat Screen HDTV through HDMI for hours however there was always part of the screen cut off even after adjusting both the resolution ratio on TV and Mini. After 3 calls to Insignia TV and Apple Support nobody had a definitive solution for me and was mainly told to live with it! One person from Applecare did half heartedly suggest trying a VGA connection instead in spite of lower quality. I went to the MAC store and they were confused as were the people at Best Buy but I reluctantly bought the MINI VIDEO PORT CABLE + VGA CABLE at Best Buy and to my surprise IT WORKED AND LOOKS PERFECT and automatically adjusts to fit any setting of computer resolution LIKE MAGIC. I have never posted but this seemed like good info as I read through a lot of blogs yesterday trying to resolve this issue. AGAIN THE SOLUTION IS TO TRY THE VGA CONNECTION. -chuck

  • OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B

    I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1.  
    Everything works perfectly previously on 10.8.4 and 10.8.5.  I did not test on 10.9.0 as I went straight to 10.9.1.  Anyone else having this problem?  Any thoughts on resolution?

    OK so perserverance seems to have helped here - i used the cmd R function on start up to get to the page where i can re install OS X Lion - Safari now working.
    However i have Office 2011 for MAC and now Excel wont start so i will post on another thread for help with this
    Hope this helps if anyone has a similar issue

  • Mac Mini + Sharp Aquos: Signal is not compatible? HELP

    I am trying to get an Intel based mac mini to display on Sharp Aquos LC-45GX6U TV. I am using a dvi-to-dvi cable.
    When initially connected, it worked fine, outputting at 1280x768 at 60Herz. It is not the native resolution for that TV, but close enough to display OK. I tried to play around with resolutions and as soon as I switched to another res, the TV showed a black screen with a message "signal is not compatible with this input". The funny thing is that when restarting the mac, it shows the boot screen fine with 1280x768 at 60hz shown in the right top corner of the TV. However, as soon as it boots, it goes back to the black screen with the dreaded message.
    I have tried connecting other monitor(s) and TVs (all of which work fine) and then changing the resolution back to 1280x768, then reconnecting to Sharp Aquos. It doesn't work.
    I have tried clearing PRAM and NVRAM - it doesn't work. Still gives the same message.
    I tried deleting plist files on the mac (which supposedly save monitor settings) - it doesn't work.
    I tried booting it in safe mode and it worked worked, if you reboot in normal mode, it goes back to the dreaded messaged. I then tried going back to safe mode and playing with resolution there. Once I did this, it showed the black screen with the message in safe mode and now the safe mode does not work either.
    Please help!

    Probably the best thing to do at this point will be to trash the preferences file(s) associated with displays. In /Library/Preferences there should be a file labeled com.apple.windowserver.plist. Throw it in the trash. Also, for however many user accounts are on the mini, there should be files in /Users/name/Library/Preferences/ByHost that are named com.apple.windowserver.xxxxxxx.plist where xxxxxx is a hexidecimal string of letters and numbers and where name is the name on the account. Throw all of those files in the trash as well, then restart the mini.
    When OS X restarts and finds those files missing from their expected location, it will generate fresh copies with factory default values. That should give you a fresh start with your Aquos. Throwing away the .plist files described will also cause the loss of any custom color calibrations you might have done, or any other display specific preferences that may have been stored.

  • 70" Sharp LED-LCD TV as monitor for Mac Mini?

    I just purchased a 70" Sharp LED-LCD TV---considering buying a Mac Mini to watch TV online and ditching my DirecTV.  TV resolution is 1920 x 1080.  Will I be able to get a High Definition picture as clear as HD DirecTV this way?

    what are you planning on watching on the MM?  if you're thinking of getting rid of DirecTV and getting all of your programming from Hulu or something like that, those sites don't stream in 1080p, so no.  If you're downloading BluRay rips and watching those, then yes, it'll display in 1080p.  I believe it can actually handle resolutions higher than 1080, but since no TVs support those resolutions (yet), you'll be limited to 1080.

Maybe you are looking for