Sharp AR-C330      Cant print PDF with Intel chips

We have no problem to print anything but PDF on the Sharp printer when using a Mac with Intel chips. The same document is printed very well on older Macs that are not Intel.
Sharp is helpless on this matter.
Thanks for your input.

Hi La__La, and a warm welcome to the forums!
First, as a test, I'd Print to a PDF file on an IntelMac, move the file to a PPC Mac, and try printing it from there... to help narrow down the problem.

Similar Messages

  • Cant print pdf , whats up worked fine before ????

    ok whats the deal,,, I cant print pdf anymore since I got this new update !!!!!!! windows vista , acro  (acting up ) bat... Most all of my printing is PDF . can I just dump this 9.0 thing an go back to  8.0 ,,,,,,Thanks

    Whoa! Sounds like you might have gotten hit by a virus. I have not heard of a message that you need to download AA9, particularly since AA9 has a hefty price with such a download. Was the download actually from Adobe or some unknown site? If the latter, I would suspect the worst (OK, I get paranoid at times). If it was AR9 (the reader), then it might be a more reasonable request, but the download should still be done from Adobe.com. AR9 can run with AA8 also, but there are hickups that occur that leads to Adobe's recommendation to not do a dual installation. That goes for AA8 and AA9 also. Typically AA8 is uninstalled with the AA9 installation.
    Because of my paranoid view, I would suggest running a serious virus scan before doing anything else. I would not transfer anything to another machine or use a memory stick until you are sure things are clean. I virus would surely potentially cause such problems.
    Feel free to ignore my ranting, but I am concerned about what happened as the download was done and such. Unless you are real sure about the "AA9", I would finish a virus scan, uninstall the AA9, and go back to AA8. You will need to be sure you uninstall, delete the Acrobat folders, use the MS Cleanup utility (mentioned several times in the forum), and reboot before the reinstall. If you are sure you had a clean AA9 download from Adobe and not some other place, then you might try it again. I would be tempted to go back to AA8.

  • Adobe Reader prints PDFs with magenta hue when printing is set to B&W

    Adobe Reader prints PDFs with magenta hue when printing is set to B&W

    BTW... Asking the SAME thing THREE TIMES WON'T change the answer.

  • Reader Adobe Reader prints PDFs with magenta hue when printing is set to B&W

    Adobe Reader prints PDFs with magenta hue when printing is set to B&W

    BTW... Asking the SAME thing THREE TIMES WON'T change the answer.

  • HP Laserjet 4250 - While Printing PDFs with Watermark, Prints images as scrambled

    Hi,
    I am using HP Laserjet 4250 printer. While Printing PDFs with Watermark, the printer prints images as scrambled. It prints the part of the image as scrambled which is overlapped by the Watermark. The other part of the image is printed fine. When seen on the screen, it shows up the image with the watermark properly. Could you please suggest how to arrive at a solution for this problem. Thanks in advance.

    Hi @Sebastian43 
    I suspect your question would be better answered in the HP Enterprise Business Community,  as the HP LaserJet 6L is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to view the Printing and Digital Imaging.  When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
    You may find the HP LaserJet 6Lse Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
    Best of luck.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How do I update my iMAC with Intel chips beyond 10.4.11 ?

    From the days of the Apple 1 until the days of the first Mac I was an Apple user. Then corporate America drug me away kicking and screaming to the Windows world. Now I have bought a used iMac with Intel chips to use as an Apple Forensics test machine. However, I need to update it as far as I can go and can't seem to locate the information on the net/ Do I need to go to Amazon and get a disc?
    This iMac has served to remind me just how great Apples are. Can not wait to retre!
    Thank you.
    Mike

    Upgrading to Snow Leopard, Lion, or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer)
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
             3. MacBook Pro (Mid/Late 2007 or newer)
             4. MacBook Air (Late 2008 or newer)
             5. Mac mini (Early 2009 or newer)
             6. Mac Pro (Early 2008 or newer)
             7. Xserve (Early 2009)
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         Am I eligible for the free upgrade?
             See Apple - Free OS X Mountain Lion upgrade Program.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • New G5 towers with intel chips

    Does anyone out there know when Apple plans to release the G5 towers with intel chips? I waiting for the Quad G5 with core duo intel chip. Anyone heard anything?

    Might want to take a look at www.techreport.com (though there are lots of sites with information on Intel chips and roadmaps).
    Intel will launch six on June 19 with model numbers ranging from 5110 to 5160 in increments of 10. The chips will reportedly run at 1.6 GHz, 1.86 GHz, 2.0 GHz, 2.33 GHz, 2.66 GHz, and 3.0 GHz with 4 MB of L2 cache across the board, as well as front side bus speeds of 1,066 MHz for the 1.6 and 1.86 GHz models and 1,333 MHz for the rest.
    AMD isn't sitting idle either.
    Also,
    http://www.geek.com/procspec/procmain.htm
    http://www.digitimes.com/
    Core 2 Quad
    One thing about Intel, there is always going to be lots of reports about what to expect, code name, specs, performance. And it will be very busy 2H for 2007 for Intel.
    Heat is important to servers, IT, as well as the living room. The cost of power, to cool systems, and size, can factor into and cost more long term than the cost of a system.
    Optimizing OS X for these along with software is going to take time. Adobe said to expect CS3 sometime 2Q or so 2007. The G5 Quad is still a good system. Quad Core Intel chips are expected in 2008, which will be another step up.

  • All of a sudden I cant print PDF's with the C4180

    The print starts to pull the paper in and then quits, never printing the PDF file. The printer works fine for everyjthing else.

    Thank you for the reply. As far as OCR is concerned, I'm not sure. I was able to print PDF up until a week or so ago, but then at first it started asking for an output file name and it would go to my documents. Even then, I couldn't print the PDF. Then a couple days ago it no longer asks for a file name, the paper gets pulled into the printer then stops. I can print everything as always.
    John

  • Problem printing PDF with Acrobat Pro 9.4.4

    Hi!
    I can't correctly print a PDF with Acrobat Pro that was created in Indesign CS5.
    I want to print it on a letter format (8,5 X 11") and it offers me a format of 8,49 X 10,99". It results in having my document being printed as tile with it's original format 12 X 21,5" as if I didn't adjust the format to be reduced.
    I temporary used Preview to print my PDF, but now I can't as the encoding in which I received the PDF used to be "Creo Normalizer JTP" and now it is "Adobe PDF Library 9.9"
    If anyone can help!
    This is my first time here, thanks in advance for your help

    Here's what it looks like (I work in french, hope you can understand)
    I just updated my software, thanks for that!
    Now, my problem is still on... I still have the very same result when I print. I did selected the correct Page Scalling I needed. I did selected the paper size I wanted. I chose Shrink to Printable Area and I tried with Fit to Printable Area.
    Since I've had this problem the size appears as : 8,49 X 10,99 (Instead of 8,5 X 11). I tried with Legal (8,5 X 14) but it appears as 8,49 X 13,99. I went through the preferences, but I can't find anything that could be the problem.
    Any other idea?
    Thanks!!
    Also, Preview was very helpful, as it did print my PDF correctly! I understand it's not the best... but it did the job

  • Print PDF with special print options of Canon IR printer

    Hi,
    We have a collection (db driven) of PDF documents that we want to send to our network printers. Some document need a hole punch of some other specific printeroptions of a Canon IR printer.
    The ideal solutions is a windows application where i could define virtual printers with their print options (pdf and printer specific).
    Eg:
    A user creates in a the windows app a virtual printer with name and print options
    - FastPunch: Printer IR5570 with hole punch
    - Fast: Printer IR5570
    - Color: IR C4080
    - ColorBooklet: IR C4080 with booklet options
    When the app starts its batch it will look at de db and find rows with an PDF and the name of a virtual printer. The documents are printed with specific printer preferences.
    Does someone has experience with such an solution? Tips?
    Someone wants to make this in vb.net (or c#)? What cost?
    gtx, Pierre

    I have downloaded the Acrobat SDK but I haven't really waded through the documentation or samples yet. I've only been working on this project for about 3 days now and not full time. This isn't the highest priority at work. I've worked a bit with the adobe reader control and that looks like it has some promise.
    I have two significant problems:
    1) I don't want the user to see any windows appear other than my console application. That way I have it working right now, Acrobat is required and appears minimized while the file is spooled and then is closed after spooling completes. Not so horrible but I'd like to get away from it if possible. To print the file right now I'm using the startprocess module or something (new version of shell I think). I'm starting the pdf with the verb "Printto" and that tells Acrobat to print to a printer that I specify.
    2)Biggest problem. I have no reliable way to change the number of copies or any other print settings. I am not willing to write a program that spools a single copy multiple times just to get multiple copies. Currently my program uses rundll to open a printer preferences dialog, and SendKeys to modify the print settings. This means that the computer cannot be used while automated printing is occurring.
    Right now the program's only saving grace is that it allows the user to be ignorant of the job settings so that all the user has to do is indicate an item number and quantity and walk away (hoping nothing changes the focus and derails SendKeys - but we know that kind of thing never happens in XP :P )

  • Fail to print pdf with flash(updated)

    Hi, all,
    I open a pdf with flash in adobe reader.
    I want to print it, but it doesn't get the result as what I see in adobe reader.
    It seems that the  flash has an animation, and the printer capture the image before the animation is finished.
    Did I post the discussion in the right forums?
    And if you need more information, tell me please.
    Thanks

    You asked in the correct forum, but it appears that no-one knows the answer.
    I know that there were some problems printing Flash content, but I do not know how Flash Player integrates into Adobe Reader - if it uses the installed plugin, or if it uses its own plugin.

  • Strange font when printing pdf with Reader X

    Hello,
    Who can help? I recently upgraded from Adobe Acrobat Reader 9 to Adobe Reader X. Since then, a strange problem occurs. When printing a pdf files to a printer, the font is changed. When viewing the file on the screen and printing them with version 9, everything is OK. The Arial font appears as it should. But when printing, a very ugly font type appears. The pdf files I use contain only a 'standard' Arial and Myriad Web font.This problem is very annoying.
    Can somebody help? I use version 10.0.1

    If you go the attached web page:
    http://www.adobe.com/support/reader/
    (http://www.adobe.com/support/reader/) ,  you
    will see "download an older version" underneath
    the Download Adobe reader.
    If you click in this link (download an older version), you
    can pick from version 8 and 9.
    Since erasing version 10 and downloading version 9.4,
    my problem has gone away completely.
    As with you, I consider this a major problem. It certainly added
    a lot of grief to my life when I could not trust my printer
    output at all.
    Hope this helps.
    Marsha

  • Printing PDF with English & Chinese

    Hi experts,
    I have encountered a following problem: we would like to print texts with mixture of English and Chinese on a smartform converted to a PDF format. But the chinese is not printed properly. Could you please advise on how should the output device / output type be configured. What are the neccessary settings that have to be made?
    Thanks a lot for your hints.
    Tomas

    I got it to work. I have a process that sets an application level item(CUR_WO_NBR) to the current value of the text field holding the work order number(P150_WO_NBR). This process runs right before the branch to print the pdf. the pdf of course uses the application level item in its query (CUR_WO_NBR).
    - Ghoulies

  • Why will Acrobat X not print pdf with watermark correctly?

    Users with Acrobat X Standard have trouble printing PDF documents with watermarks that overlay the document text and block out some of the document text. The users with Acrobat XI Standard so far do not have this issue. How can this be resolved for the users with Acrobat X Standard? Is there a setting that makes the watermark print behind the document text?

    Hi,
    Something (maybe) that might help.
    With Acrobat 8 or 9 -
    In the "Add Watermark" dialog; look for "Appearance Options" (lower third of the dialog window).
    Click on it.
    In the "Appearance Options" dialog, be sure "Show when printing" is selected.
    Test the PDF one a different computer using Adobe Reader.
    Be well...

  • Cant Print PDF

    Hi
    I have a customer who has a windows 7 machine with the latest version of adobe reader
    She can print to the printers using other applications such as word/pain/test printing.
    Everyone in the office using the same printer can print pdf documents fine and they are using the same PC's with the only difference being the user profile.
    I have tried uninstalling and re-installing software and printer drivers
    cleared temp files etc
    I have also trawled the internet looking at various forums about ticking boxes to print as an image and to also change language settings.
    pulling my hair out with this one
    any ideas?

    Pat was trying to illicit more information from you. Are there any error messages? Does the printer seem to respond (lights flash or make noise) but nothing is printed? Can your customer use the temporary workaround of printing as image?
    Can the customer print if they move back to the previous version of Reader? Occasionally people report having issues with Reader and/or Acrobat with roaming profiles. I do not recall anyone reporting a fix.

Maybe you are looking for