Sharp audible click when powering on/off

Running 10.4.7 on an Intel iMac and just starting getting a sharp clicking sound (single sound) when either turning the computer on or off. No behavior changes in terms of speed, display or stability, but I'd like to find out if other machines are doing this.

Is this click coming from your speakers, whether the built-ins or attached? I ask because most of us seem to get a click or pop when the Mac wakes from sleep, etc. Isn't all that loud on my system and doesn't bother me, but some folks really dislike it and have mentioned it (read moaned & complained) extensively in the past. Seems like maybe the sound chip or something 1st powering up.

Similar Messages

  • Ipod wheel clicks when Ipod is off? Is this right

    The wheel of my video ipod clicks when the ipod is off.(I'm sure that it's off) I also think that my ipod battery runs down in about 4 hours. Can't be right. Is my wheel supposed to click when it's off? Is my ipod staying on all the time, but the screen is off? Has anyone else had this problem? I'm going to say that the ipod has been very unreliable in every aspect.

    yeah i got the exact same problem, my clicker wheel seems to always be running and my ipod's battery only will last maybe 4 hours at the most, it seems like the ipod never shuts down even thought the sceen is blank. i also notice when turning it on, the little apple icon never comes up, it just lights up ready to go like its been running all night.

  • Audible click when playing sounds

    For a few months now, I've had an FiiO Olympus E-10 USB headphone amp. The reason for getting it was convenience; it allows me to just unplug the Thunderbolt cable from my MacBook Air and leave my headphones hooked up to the Thunderbolt Display through the E-10. The audio quality is actually quite good, but for some reason I get an audible click every time audio stops.
    When a system sound has finished playing, there is a click
    When I pause a YouTube video or when it ends, there is a click
    When I play music from iTunes and a track pauses or ends, there is a click.
    It's really quite annoying.
    Additional data points :
    When I have the headphones connected to my audio jack on the MBA, the click does not happen.
    When I have another pair of headphones connected to the E-10, the click also happens.
    No specific drivers were installed to support the device. None are available on the manufacturers site either.
    In my view, all of the above appears to point towards a hardware issue.
    Any similar experience?
    Any thoughts on how to resolve it without buying a new device?

    Is this click coming from your speakers, whether the built-ins or attached? I ask because most of us seem to get a click or pop when the Mac wakes from sleep, etc. Isn't all that loud on my system and doesn't bother me, but some folks really dislike it and have mentioned it (read moaned & complained) extensively in the past. Seems like maybe the sound chip or something 1st powering up.

  • Does iphone lose battery when powered/turned off??

    So my lock button at the top of the iphone 4 doesn't work and i used the assistive touch button to lock screen when needed. The reason i didn't go to apple store is that i have past my warranty and didn't buy apple care.
    Anyway, the other day, the iphone shut down unexpectedly at around 40%.
    Now, normally, if it shuts down, it'll only be because of the battery being lower than 4%, and so all i had to do was to it in to power adaptor.
    BUT, because i know that the percentage left is closer to 40%, then i was wondering whether the iphone would lose battery. Because if that happens, i can just wait for a couple of hours before plugging it in....

    All devices use power when in sleep mode.
    Locking the screen does not turn the device off, never has.

  • Audible "click" in i-tunes files

    Most of my i-tunes library has been loaded from CD’s. I have found that in some files there is an audible “click” when I play it back on my i-pod. This is most frequent in audiobooks, but I have found a few music CD”s where it happens as well. It doesn’t happen for the entire CD and if I re-load the CD the “click” might disappear from where it was and pop up somewhere else, or it might go away entirely. The CD’s don’t look dirty or seem overly scratched and I have even had it happen with brand new CD’s that have never been played.
    Does this sound like a problem with the CD’s? The CD drive? I-tunes? I-pod? Has anyone else encountered this problem?

    My suggestion to use the smart playlist was more along the lines of making one list with rules to show everything in your library as long as it was kind "mpeg" (= mp3).
    Smart playlists cannot be edited manually, only by changing the rules.  You can use them as the basis for another smart playlist though.
    There is added overhead to using smart playlists, so don't go overboard.

  • No click when switching off

    Since upgrading to IOS7 my wife's iPad Mini no longer clicks when switching off or closing the cover. Her sound settings are the same as my 3rd Gen iPad which still clicks, any ideas how to recover the sound please?

    Settings>General>USE SIDE SWITCH TO>Lock Rotation.
    Make sure sound is not muted in Control Center (little bell)
    http://i1224.photobucket.com/albums/ee374/Diavonex/ac7f6dc314aca5d618ac2f55616be 20e_zpsa92a3ebd.jpg

  • My battery gets weak when powered off

    My battery has been terrible since updating. I have an iPhone 5. I have to charge it several times a day. Last night it was 100%. I powered it off. When I turned it on this morning, it was 60%. I have followed all the tips to save battery but it's not helping.

    hey... we had been informed about charge problems since the ios7...don't worry about..but i suggest you to get a battery test to apple store ..there get results if your btry is defective or your ios involved to that problem...if ur btry is defective and you are in the first year warranty...the btry will be replaced charge free...

  • HT4623 Why do the words, graphics, etc on my 4s screen vibrate when I touch it? I powered it off thinking it was a glitch but it continues

    Why do the words, graphics, etc on my 4s screen vibrate when I touch it? I powered it off thinking it was a glitch but it continues to happen. It just started out of the blue

    I think I have found the source of my problem detailed above. Apparently, there have been problems with Preview running on OS Mavericks, dating back to October 2013, which Apple has yet to acknowledge or address. Many have had similar problems with photo images loading very slowly to the point of making Preview unuseable.
    It may also explain problems I have had with flash drives and hard drives that ran on my Mac Book Pro under Lion no longer working  since upgrading to Mavericks. I found other postings on these issues.
    It is a shame that I have to resort to Google as the best source to identify problems with my Mac and possible solutions. In many cases, it directs me to the source on Apple Support, which is difficult to find when one attempts a search via Apple Support. This could use some improvement.
    I am new to using community support sites and Apple does not seem  to provide simple, clear directions  on how to get started. Jumping in with both feet, not only did I get wet, but I apparently "splashed" someone, as I got a hostile response from another community member on the first issue ever posted. I never did get an answer to the problem, though. I hope some find these comments helpful.
    Oh, and wake up, Apple. We all would hope you monitor and glean information from these postings and act promptly to remedy problems with OS Mavericks.
    Message was edited by: MikeMacBP2011

  • I have an audio problem when ever I use my Firefox web browser that makes a sharp audible sound simiular to a video game gun shot sound effect when ever I go into a new web page?

    I have an audio problem that when ever I use my Firefox web browser it makes a sharp audible sound similar to a video game gun shot sound effect when ever I go into a new web page? I change to a new site or page a page on a site, I get an audible gunshot ping trpe sound? It happens almost every time. Its very annoying and is driving me nuts???
    Any body out there had this happen also or know how to diagnose and fix this type of problem? I would hate to have to delete my whole Firefox program and have to start over again. If that is the case I will probably just scrap it and go on to try Google Chrome instead. I already have GC partially set up. I really have liked Firefox up to this point. I know add ons can cause problems at times but I haven't added anything new lately and this just started happening?

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
    Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.
    [https://support.mozilla.org/en-US/kb/Options%20window Options]

  • Keypad & trackball remain illuminated when powered-off

    I've had the pearl for 18 months with no problems.  Suddenly the keypad & trackball will remain illuminated all the time, even when powered-off.  This rapidly drains the battery.  I've performed a hard and multiple soft resets and removed and cleaned the trackball-- no luck.  Everything works fine.  I appreciate any suggestions?

    Hi AlmightySi
    Welcome to Apple Discussions
    A Self-powered USB Hub or Computer Sleep, an iMac can sleep 24-7 for weeks without a problem.
    Dennis

  • When powering off my iPod touch, any application (facebook, viber etc)installed using App Store won't work again

    When powering off my iPod touch, any application (facebook, viber etc)installed using App Store won't work again
    How to solve this issue?

    Try a hard reset first. Press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    If still no luck, try downloading and installing a new app from the App Store.  Doing so has cleared the issue up for several users.
    B-rock

  • Quiet, high pitched squeaking sound when powering off 60D?

    I just got a 60D body yesterday, and I just noticed a high pitched, very quiet noise that happens for a second or two when powering the 60D off. My Rebel t3 does not make this noise so I was wondering if it's normal?

    TCampbell wrote:
    That's the noise of the piezoelectric cleaning system. It vibrates the low pass filter (located just in front of the sensor) to shake dust loose.
    In some cameras it sounds like a couple of squeaks. My 60Da makes the same noise. No reason for concern. Some cameras start out not squeaking when new and end up making the squeak later.
    The good news is I have never heard of it actually being a problem.
    No, the good news is that the OP is still young enough to be able to hear a squealing sound at such a high frequency!
    Bob
    Boston, Massachusetts USA

  • Saving Place When Powering Off Ipod Touch

    When I turn off my ipod touch completely it always loses the song I was last on. This does not matter if I am playing a specific album or shuffling all songs. My other ipods (nano, mini, shuffle) always keep the place even when powered off. Is there a way to get the touch (2G) to save its spot?
    I note it does save it if I only put it to sleep and not power off completely. if I am not using it for a couple of days, should I put putting it to sleep or powering it off?

    The iPod is telling you to connect the iPod to your computer with iTunes.  When connected, iTunes should open and tell you what to do.  If it does not, you want to do is to restore the iPod from backup.

  • When I click sleep, Imac turns off not just sleep

    When I click sleep, Imac turns off not just sleep. Any fix?

    Hi Hank,
    Some things to try...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/ht1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964
    (SMC reset=  Shut down, disconnect power cord for 10 seconds, reconnect power cord, wait 5 more seconds, turn computer back on)
    but it is slightly different:   (PMU REST = Shut computer down, disconnect power cord for 10+ seconds, reconnect power cord WHILE SIMULTANEOOUSLY PRESSING POWER BUTTON, let off power button for a few seconds, then press power button again to restart the mac mini.)
    Can also be caused by USB or Firewire devices.

  • Blue screen when powering off

    I recently purcahsed a one year old Lenovo 3000, it had Windows XP installed and I upgraded this to Windows Vista with no problems. I then renamed the laptop and deleted the previous owners user files and that's when I had a problem. When I power down the laptop I get a Blue Screen saying something about a dump and saying it was doing something to protect my PC ?  I found some kind of fault finding log and it mentioned something about the pc's name and also something about being unable to access a certain user file. I changed the computer name back to the original one and unerased the original user file but I still get the Blue Screen when powering down.
    Is it possible to get a replacement software DVD that will get me back to square one please, thanks for any help. Dan McLean in Port Glasgow. 

    This really sounds like shoddy drivers combined with an IRQ conflict.
    I suggest you post your IRQ's from System Info, for example:
    IRQ 0   System timer   OK
    IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
    IRQ 4   Communications Port (COM1)   OK
    IRQ 5   WinFast TV2000 XP WDM Audio Capture   OK
    IRQ 6   Standard floppy disk controller   OK
    IRQ 8   System CMOS/real time clock   OK
    IRQ 9   Microsoft ACPI-Compliant System   OK
    IRQ 11   NVIDIA nForce PCI System Management   OK
    IRQ 12   Logitech-compatible Mouse PS/2   OK
    IRQ 13   Numeric data processor   OK
    IRQ 14   Primary IDE Channel   OK
    IRQ 15   Secondary IDE Channel   OK
    IRQ 16   RADEON X800 XT Platinum Edition   OK
    IRQ 17   WinFast TV2000 XP WDM Video Capture   OK
    IRQ 18   Creative SB Live! series   OK
    IRQ 20   NVIDIA Network Bus Enumerator   OK
    IRQ 21   Standard OpenHCD USB Host Controller   OK
    IRQ 22   Standard OpenHCD USB Host Controller   OK
    IRQ 23   Standard Enhanced PCI to USB Host Controller   OK
    Also, as you intend to DL and install the  nVidia Drivers make sure you get the sound drivers from Realtek Downloads too.
    What Drivers are you using for the AIW?
    Take all the Driver CD's and make pretty Christmas tree ornaments out of them
    ~Edit~ I just looked at the stop error again and realized I misread, then I saw Supershanks post My initial suspicion is likely to be wrong, but it's worthe a look anyway.

Maybe you are looking for

  • If i press the Find button didn't get the all fields

    Hi........... If i press the find button only two fields get the values remaining fields didn't get the values :CONTROL_1.ASSET_NUMBER := i.asset_serial_numebr; :CONTROL_1.INSTANCE_NUMBER := i.serial_number; ---------------only this two fields are in

  • Renaming and copying file in scriptask

    Hi All, I have created a package in which once the process is over , i want to add today's date to my source file and move it to another folder. suppose my source file is Test.xls. i want to change the name of my file to FilePolling.20150224.Test.xls

  • Who has a defect like this?

    The left side of my screen is higher than the other side, and this seems prevalent here,so?

  • MacPro to Mac Mini?

    I have an existing MacPro system and considering picking up a Mac Mini in addition. My question is: is there a way to essentially duplicate my system drive from the MacPro over to the Mac Mini. That way I have all my software, OS, etc. essentially id

  • Disconnect after 5-10 minutes

    After 5-10 minutes of use my application disconnnects  all users....does anybody know some general causes of this or how do i fix it...........in the server logs i get code 600 normal disconnect.........I don't know how to go about addressing this in