Sharpen only images, which are not sharpende jet...

Hi,
i have an Import of 2000 pictures. Some of them are already sharpened indiviually. For all the others (about 1900) I would like to use the same sharpening-level and apply it without selecting the images individually.
Is it possible to filter the images depending on the fact if they are sharpened already?
Thank you for your help!

If the images are Raw images and have been sharpened in a different program than Lr they will be un-sharpened in Lr. Lr does not recognize / honor edits of other Raw-editing programs.
If they have been sharpened in Lr they should not be imported again. Import is only for images that have never been imported in Lr. But you could transfer the sharpening settings done in Lr for a specific image to a multitude of other images. All images have to be either in the same folder or in the same collection. You have to select them all (i.e. the image that has the sharpening and the images that are to receive the same sharpening). Make sure that the first image (that has sharpening done already) is active and then - in the Develop Module - press on <Sync>. A dialog appears where you can select which settings you want to transfer.
If they are JPGs and the sharpening has been written into the pixels Lr will import them as per image file. Lr cannot recognize which JPGs have been sharpened and which ones not.
And there is no way of transferring the sharpening from one image to the others.
Transferring settings from one image to another (or a multitude of others) is possible in Lr when the first image has been edited (sharpened) in Lr. The sharpening settings are saved in the Lr database (= catalog) and these settings can be transferred to other images. But without any edits (sharpening) in Lr for the first image there are no settings that Lr could transfer.

Similar Messages

  • How can I add images which are not in Iphoto to Iweb photo gallery?

    I have many photos that I have not imported in Iphoto just because I worked on them with Photoshop and downloaded straight from the camera memory cards with a card reader. If I add the image from the disk with the add/choose command (or insert/choose: I have the italian version and I do not know what is the English original command...) the image is just attached to the screen but not inserted in the thumbnails of the gallery.
    Please help.
    Thanks
    Mauro
    Message was edited by: Bigabiga

    Drag/drop the picture you want to add on the area with the other thumbs.

  • How to delete images from folder which are not in the database

    I am created windows form
    i wont to delete images from the folder where i have stored images but i only want to delete those images which are not in the data base.
    i don't know how it is possible . i have written some code
    private void button1_Click(object sender, EventArgs e)
    string connectionString = "Data Source";
    conn = new SqlConnection(connectionString);
    DataTable dt = new DataTable();
    cmd.Connection = conn;
    cmd.CommandText = "select * from tbl_pro";
    conn.Open();
    SqlDataAdapter da = new SqlDataAdapter(cmd);
    da.Fill(dt);
    int count = Convert.ToInt32( dt.Rows.Count);
    string[] image1 = new string[count];
    for (int i = 0; i < count; i++)
    image1[i] = dt.Rows[i]["Image1"].ToString();
    string[] image2 = new string[count];
    for (int i = 0; i < count; i++)
    image2[i] = dt.Rows[i]["Image2"].ToString();
    var arr = image1.Union(image2).ToArray();
    string[] arrays;
    String dirPath = "G:\\Proj\\";
    arrays = Directory.GetFiles(dirPath, "*", SearchOption.AllDirectories).Select(x => Path.GetFileName(x)).ToArray();
    int b= arrays.Count();
    for (int j = 1; j <= b; j++)
    if (arrays[j].ToString() != arr[j].ToString())
    var del = arrays[j].ToString();
    else
    foreach (var value in del) // ERROR DEL IS NOT IN THE CURRENT CONTEXT
    string filePath = "G:\\Projects\\Images\\"+value;
    File.Delete(filePath);
    here error coming "DEL IS NOT IN THE CURRENT CONTEXT"
    I have to change anything .Will It work alright?
    pls help me
    Sms

    Hi Fresherss,
    Your del is Local Variable, it can't be accessed out of the if statement. you need to declare it as global variable like below. And if you want to collect the string, you could use the List to collect, not a string.  the string will be split to chars
    one by one.
    List<string> del=new List<string>();
    for (int j = 1; j <= b; j++)
    if (arrays[j].ToString() != arr[j].ToString())
    del.Add(arrays[j].ToString());
    else
    foreach (var value in del)
    string filePath = "G:\\Projects\\Images\\" + value;
    File.Delete(filePath);
    If you have any other concern regarding this issue, please feel free to let me know.
    Best regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can i find all included pictures which are not in a album? (only in the Library)

    How can i find all included pictures which are not in a album? (only in the Library)

    Hi there,
    I'm afraid I don't quite understand your question. All images are in your Library and only those you specifically select from that Library would be in an Album. What platform are you using? Revel Mac, Elements, web browser, etc?
    Here is a link with some helpful information:
    FAQ: File Basics: How do I Upload, Download, Share, and Delete files in Revel?
    Thank you,
    Glenyse

  • Select only those images which are in a Stack

    Hi.
    Is there any way to filter the Browser view to show only those images which are in a stack?
    I often make a few details (cropped versions) of Masters, which I keep stacked with the Master. I would like to filter my Browser view to show either only those Stacks, or, alternatively, only those Versions which are not in a Stack.
    Slightly more complicated: I have many whole-Library Smart Albums which pick up the cropped Versions (by Keyword). Some of these cropped Versions have become detached (un-Stacked). I would like to be able to filter these Smart Albums for Versions which are not part of a Stack.
    Even more complicated: I would like to filter the same Smart Albums for Versions which have Stack-mates in the same Smart Album -- that is, I would like to identify within the Smart Albums those Versions which share a Master. I've made this slightly easier by Stacking the Versions with the Master, but I don't know how to filter an Album for those Stacks which contain two or more Versions.
    In short, I'm looking to access the properties "Is in Stack" (or whatever Aperture calls it), and "Number of Stack-mates in Stack in this view" (or whatever Aperture calls it). Aperture knows this -- it is displayed visually -- but I don't how to access it.
    Thanks.

    Thanks for the reply, Allen. That's all I've been able to figure out. It would nice (and, imho, proper) for Aperture (a DBMS) to provide user access to all properties.

  • Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.

    Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.
    Solutions?

    No, I never really found an easy solution.  I believe it is an issue with some corruption in the iTunes database on the specific device.  In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs.  A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup.  It did work, so I imagine it would probably work for my current issues with the iPhone and iPad.  But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost.  When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might.  If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
    None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it.  I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
    Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

  • Sp_who2 -need only active sessions from users which are not the background sessions

    Hello,
    sp_who2 -need only active sessions from users which are not the background  sessions
    Please assist.
    Best regards,
    Vishal

    Its better to use DMV's to view only active sessions from users (spid>50) as mentioned by Shanky.
    You can do that using sp_who2 but it requires a bit of programming to list only user sessions.
    SELECT
    S.SESSION_ID,
    S.STATUS,
    S.HOST_NAME,
    C.CLIENT_NET_ADDRESS,
    CASE WHEN S.LOGIN_NAME = S.ORIGINAL_LOGIN_NAME THEN S.LOGIN_NAME ELSE S.LOGIN_NAME END LOGIN_NAME,
    S.PROGRAM_NAME,
    C.CONNECT_TIME,
    S.LOGIN_TIME,
    CASE S.TRANSACTION_ISOLATION_LEVEL
    WHEN 0 THEN 'UNSPECIFIED'
    WHEN 1 THEN 'READUNCOMITTED'
    WHEN 2 THEN 'READCOMMITTED'
    WHEN 3 THEN 'REPEATABLE'
    WHEN 4 THEN 'SERIALIZABLE'
    WHEN 5 THEN 'SNAPSHOT'
    ELSE CAST(S.TRANSACTION_ISOLATION_LEVEL AS VARCHAR(32))
    END AS TRANSACTION_ISOLATION_LEVEL_NAME,
    S.LAST_SUCCESSFUL_LOGON,
    S.LAST_UNSUCCESSFUL_LOGON,
    S.UNSUCCESSFUL_LOGONS,
    S.CPU_TIME AS CPU_TIME_MS,
    S.MEMORY_USAGE AS MEMORY_USAGE_PAGES,
    S.ROW_COUNT,
    S.PREV_ERROR,
    S.LAST_REQUEST_START_TIME,
    S.LAST_REQUEST_END_TIME,
    C.NET_TRANSPORT,
    C.PROTOCOL_TYPE,
    S.LANGUAGE,
    S.DATE_FORMAT,
    ST.TEXT AS QUERY_TEXT
    FROM
    SYS.DM_EXEC_SESSIONS S
    FULL OUTER JOIN SYS.DM_EXEC_CONNECTIONS C ON C.SESSION_ID = S.SESSION_ID
    CROSS APPLY SYS.DM_EXEC_SQL_TEXT(C.MOST_RECENT_SQL_HANDLE) ST
    WHERE
    S.SESSION_ID IS NULL
    OR S.SESSION_ID > 50
    ORDER BY
    S.SESSION_ID
    -Prashanth

  • How can i find all included pictures in the Online-Library which are not in a album?

    Hi
    I use Adobe Photoshop Elements 13 with (Revel). My question ist how can i find all included pictures in the Online-Library which are not in a album? I would like only to have pictures in Library which are included in a online album.

    Hi there,
    I'm afraid I don't quite understand your question. All images are in your Library and only those you specifically select from that Library would be in an Album. What platform are you using? Revel Mac, Elements, web browser, etc?
    Here is a link with some helpful information:
    FAQ: File Basics: How do I Upload, Download, Share, and Delete files in Revel?
    Thank you,
    Glenyse

  • Problem with Signing in itunes with my id. After signing in it does Not Show the Apple id and they are asking 3 Times if i wanna download Songs I have already bought but which are not on this iphone

    Dear community, I'm experiencing a problem since 2 days, that if I sign in in my iTunes account with my Apple ID on my iPhone it doesn't show at the end if scrolling down the ID details and credit anymore. If I try to download songs I bought once but which are not on this device anymore, it asks me 3 times for the ID and password. I fill it in but at the end nothing happens. I see only in the middle a moving symbol.
    What can I do? Apple ID and password are correct . I canceled all settings but same as before.
    Many thanks in advance.

    AJ Green wrote:
    My wifi only iPad 2 has GPS, and a compass/accelaerometer to determine which direction I am facing.  You need to enable location services.
    Your wifi-only iPad does not have GPS. Read the specs for your device.

  • Deduplication: how to identify which files are "in-policy" (and which are not)?

    Dear experts,
    in eventlog I find the following information for one of my deduplicated volumes:
    Volume: F: (\\?\Volume{9794e270-fb08-487e-979b-8a08fa9ca311}\)
    Error code: 0x0
    Error message:
    Savings rate: 24
    Saved space: 853327714684
    Volume used space: 2681869406208
    Volume free space: 66771247104
    Optimized file count: 1199618
    In-policy file count: 1188049
    Job processed space (bytes): 0
    Job elapsed time (seconds): 2
    Job throughput (MB/second): 0
    Some things look strange to me: 
    - The savings rate is only 24% which looks odd because I get about 40% on other file shares with similar characteristics.
    - The "Optimized file count" is higher than the "in-policy" file count.
    - The volume has about 3.5 million files but only 1.1 million files are "in-policy".
    My understanding of "in-policy" files is that all files are in-policy which are older than 3 days (if not configured different, which is not the case) and which are not contained in an excluded folder (nothing configured here) and which have no
    excluded file extension (nothing configured here apart from the default). Right?
    I'm sure that only a small fraction of the files on this volume are younger than three days, so something seems to be wrong there, but I have no idea how to find the cause of the problem.
    Is there any way to identify the files (full path) which are considered to be not "in-policy"?
    How can I find out if the optimization process really looks at all files - and doesn't skip a million?
    Thanks!
    Regards
    Christoph

    Mandy, thanks for your feedback! I've read these technet articels, but I couldn't learn something really helpfull related to my problem there. To make investigation of the problem easier I did the following:
    - created a brand new empty volume (x:) on the same server
    - enabled data deduplication on that volume with a minimal file age of 0 days
    - copied about 2GB of data from the problem-volume in 15450 files to this new volume
    - started "Start-DedupJob x: -Type Optimization -Memory 50"
    After a few seconds that job completed and I got the following result:
    Volume: X: (\\?\Volume{d1ba9ed8-28f1-44d1-9535-fe603d6a70c6}\)
    Error code: 0x0
    Error message:
    Savings rate: 0
    Saved space: 12360718
    Volume used space: 3091664896
    Volume free space: 7610097664
    Optimized file count: 153
    In-policy file count: 153
    Job processed space (bytes): 46095214
    Job elapsed time (seconds): 9
    Job throughput (MB/second): 4.88
    The question is: why are only 153 files in-policy?
    All files (of more than 15000) are of course "older than 0 days", there are no excluded folders configured, there are no excluded extensions configured, no file has one of the default excluded extensions and more than 1000 files are bigger than 100kB
    (minimal size for deduplication is 32kB). So what makes only 153 files qualify for deduplication?
    My impression is that there are further undocumented requirements which have to be met by a file to qualify for deduplication. But if there's no detailed log of an optimization run available how to find out what's going on?
    (Or is something going wrong on my server?)
    Kind Regards
    Christoph

  • How can i send videoes which are not in camera roll via whatss app to others ?

    hi,
    I am going to know that how can i transfer video which are not in camera roll via whatss app to others ?
    thnaks in advanced.

    Where are the videos?
    If WhatsApp supports sending videos from the Camera Roll only and that is your only option, that is it.
    Contact WhatsApp. They have a website.

  • How can I detect workbooks which are not longer in use?

    Hello togehter,
    I am looking for a way to detect BEX Workbooks which are not longer in use. Is there something in the BC which I can use for that?
    Best would be some query with the information of when and by whom a workbook gets called up last time.
    Thanks!
    Andreas

    Hi Edward,
    there is no key figure providing this information.
    First of all you got convert the 0CALDAY from Date to Number, therefore you got to configure a new variable (by replacement path) and put it into a formula.
    Use the result of this formula as a column and create a new TOP 1 condition on it.
    Now you will only get one row per Workbook/Query (or whatever you have chosen) with the date of the last use of it.
    Regards,
    Andreas

  • I can not perform software updates or download any programs. They appear in the download box as images that are not recognized. How can I fix this?

    I can not perform software updates or download any programs. They appear in the download box as images that are "not recognized". I thought maybe my antivirus software was setting up a firewall, but I have disabled it, so that's not the case. Any suggestions as to  how I can fix this?

    If the downloads are gone, it's possible that Windows is removing the downloads based on security policies set in IE. I realize that sounds strange, but it's related to Firefox's feature of submitting downloads to your virus scanner and marking them as having come from the internet.
    To test this theory, you could try disabling the scan feature. I assume you have good "real time" antivirus protection which checks every file saved to your hard drive. (If not, you really should get that, and you can use Microsoft's free [http://windows.microsoft.com/en-US/windows/products/security-essentials Microsoft Security Essentials] for now until you have time to review all the available choices.)
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''scan''' and pause while the list is filtered
    (3) Double-click '''browser.download.manager.scanWhenDone''' to toggle its value.
    Firefox now should ignore Windows' download security. Does it change how Windows handles the file?

  • Standard Manager executing other programs which are not INCLUDED .

    hello guys,
    We are having eBiz 11.5.9 environment and 9.2.0.6 Database on AIX 5.3 32-bit environment.
    I am new to this client's environment and found that, there are 3 include specialization rules defined for Standard Manager which does not include "Active Responsibilities" program but still this Standard Manager is executing "Active Responsibilities" without any issues.
    How is this possible ???
    Ideally, Standard Manager should only run those 3 included programs ONLY and for rest of the programs which are not assigned to any of the concurrent manager , we should get "INACTIVE/No Manager" message.
    My 2nd question is, when I am running this oracle seeded script $FND_TOP/sql/afrqscm.sql which shows the manager assigned to the perticular request id, it gives the below output,(Below is request id is for "Active Responsibilities")
    ===================================
    SQL> @afrqscm.sql
    Enter request ID : 22035368
    Request 22035368 can be run by the following concurrent managers:
    Running Manager
    20 STANDARD
    0 ALTS
    Below are the active concurrent manager log filenames:
    no rows selected
    ===================================
    In our environment , ALTS is DISABLED manager without having any specialization rules attached to it and its basically a "Backup standard manager".
    I am wondering, what setup is required to have backup concurrent manager like ALTS which will take care of requests in case standard manager goes down ?????
    Ebiz architecture is one Admin/conc/db Tier (Aix 32 bit) and 5 Web nodes ( RHEL Linux 32 bit).
    Thanks,
    Prasad
    Edited by: 881822 on Dec 7, 2011 3:00 AM

    Hi Hussein,
    Thnks for your reply,
    My second doubt is resolved as even though there are no specialization rules assigned to ALTS manager , that means it is exactly the same as that of Standard Manager and will execute all the programs. Below is statement from your mentioned pdf ,
    =========
    Specialize your manager to run only certain kinds of requests. Without specialization rules, a manager accepts requests to start any concurrent program.
    =========
    Regarding your first question, Yes , we do bounce managers once in a month , below is the status of those two conc programs which are INCLUDED in Standard Manager.
    SQL> select 'Concurrent program '||fcp.concurrent_program_name||' is ' ||decode(fcqc.include_flag,'I','included in ','E','excluded from ')||fcqv.user_concurrent_queue_name specialization_rule_details from fnd_concurrent_queues_vl fcqv,fnd_concurrent_queue_content fcqc,fnd_concurrent_programs fcp where fcqv.concurrent_queue_id=fcqc.concurrent_queue_id and fcqc.type_id=fcp.concurrent_program_id and fcp.concurrent_program_name='CPINR080C';
    SPECIALIZATION_RULE_DETAILS
    Concurrent program CPINR080C is included in Standard Manager
    Concurrent program CPINR080C is excluded from TESTPlus General
    SQL> select 'Concurrent program '||fcp.concurrent_program_name||' is ' ||decode(fcqc.include_flag,'I','included in ','E','excluded from ')||fcqv.user_concurrent_queue_name specialization_rule_details from fnd_concurrent_queues_vl fcqv,fnd_concurrent_queue_content fcqc,fnd_concurrent_programs fcp where fcqv.concurrent_queue_id=fcqc.concurrent_queue_id and fcqc.type_id=fcp.concurrent_program_id and fcp.concurrent_program_name='CPDOR270C';
    SPECIALIZATION_RULE_DETAILS
    Concurrent program CPDOR270C is excluded from TESTPlus General
    Concurrent program CPDOR270C is included in Standard Manager
    Thanks,
    Prasad

  • Fetching data which are not common

    Hi Gurus,
              I got an strange requirement it is to fetch data from 2 internal table from the same field name but the values should not be same.can any one tell me some logic for this? eg: fetch matnr from mara and mard into an internal table but the final result in the internal table should be values which are not common in both the tables.
    Ragards,
    Ravi

    how can mara and mard will differe in entries. if there is a entry in MARD there should be an entry in MARA since it is master table. so in this case you can do some thing like this.
    first get the data from both the tables..
    loop at it_mara.
    read table it_mard.
    if sy-subrc ne 0.
    "find the material which is not there in MARD and only in MARA
    "append the matnr to another table
    endif.
    endloop.
    may be you have taken a wrong example to describe.

Maybe you are looking for