Sharpening brush in exported file
I have a problem with sharpen brush. It seems I lost it exporting version vs jpeg or tiff. I used it strongly in a portion of the image just to try and in exported file is missing. I have read about viewing at 100% etc, but I need to view the same thing between Aperture and other application. I have a 15" macbook pro and it is impossible to view and use a 100% image during sharpening brush. With Lightroom, for example, it doesn't happen. Is there a solution?
I add other info.
If you look at the exported image to 100%, then the heavy sharpened areas are mantained.
However I find of little use, in fact unreliable, adjust sharpen an image in a preview of Aperture not 100% without having control of how it will be exported once. To work 100% do not talk about .... with a 15 "!
By
Similar Messages
-
Sharpening-Shift when export/convert a RAW
I have a really big Problem:
If i convert or export (compressing / pre sharpening deactivatet) a RAW - File from Lightrom 4.3 (or ACR 7.3) too Photoshop CS6 13.01 (as a .tiff / smartobject)
I have a little clarity an sharpening shift. Colorspaces are the same etc.
All Drivers an both Programms are Up-to-Date etc.
http://www.abload.de/image.php?img=untitled-1j5pgh.jpg
Is there any Solution out there
LionbyteHow are you measuring size? If in bytes, why are you concerned about the size in bytes compared to a RAW file of the same pixel dimensions?
JPG, Original Size, Quality 12 is the best JPG file you can create of an Image in Aperture.
Jemrider wrote:
I use export and select JPEG original size 16 bit
Is that correct? I didn't think JPG could have a higher bit depth than 8 bits.
If you need top-notch quality prints, use a printer that accepts (and knows how to print) 16-bit TIFFs. -
Extremely large jpg exported files - help!
I was previously loving LR3 - used the trial for a month, decided to buy it - had really no problems. The big issue for me is now the jpg export file sizes that are being created. I run all my photos through the develop module to adjust the basics as well as draw in masks, and previously I had no trouble exporting the files as jpg, with the limit of size at 600kb and resized to 960x640 (original photos from 5Dmk2 RAW).
Then I bought the license. From then on it seems that now whenever I do the same exact export it doesn't work! I also used to use the output quality slider and set that at 100% and would get around the same file sizes, but now I'm getting files 2-3x the size of the previous exports. All of the photos have minimal metadata (10 keywords or so, that's it) and the same metadata was present in the exports in the trial version.
Playing around with more export parameters and reading around on this forum led me to try and minimize exif data - this didn't even work - files could not meet the requirements or they still ended up 2-3x the size they used to be.
The interesting part is that when I would delete all development history and set the file back to the original pre-edited RAW and export there would be no problems!
Could it be possible that LR is adding the development data into the metadata that it is attaching to the photo??
This has completely shut down my photo workflow and really is making me regret buying this otherwise wonderful tool.What I can see in the image is that it contains about (uncompressed) 750KB of XMP data, the major part of it relating to some "PaintCorrection" as follows:
PaintCorrectionWhat : Correction
PaintCorrectionAmount : 1.000000
PaintCorrectionActive : true
PaintCorrectionExposure : 0.439246
PaintCorrectionSaturation : 0.000000
PaintCorrectionContrast : 0.000000
PaintCorrectionClarity : 0.457077
PaintCorrectionSharpness : 0.000000
PaintCorrectionBrightness : 0.361949
PaintCorrectionHue : 240.000000
PaintCorrectionSaturation : 0.000000
PaintCorrectionMaskWhat : Mask/Paint
PaintCorrectionMaskValue : 0.689655
PaintCorrectionMaskRadius : 0.005442
PaintCorrectionMaskFlow : 0.000000
PaintCorrectionMaskCenterWeight : 0.843964
PaintCorrectionMaskDabs : d 0.689505 0.619480
PaintCorrectionMaskWhat : Mask/Paint
PaintCorrectionMaskValue : 0.689655
PaintCorrectionMaskRadius : 0.005444
PaintCorrectionMaskFlow : 0.000000
PaintCorrectionMaskCenterWeight : 0.843964
PaintCorrectionMaskDabs : d 0.689871 0.605390
PaintCorrectionMaskDabs : r 0.005443
PaintCorrectionMaskDabs : f 0.0813
PaintCorrectionMaskDabs : d 0.689749 0.607832
PaintCorrectionMaskDabs : f 0.1519
PaintCorrectionMaskDabs : d 0.689626 0.610275
PaintCorrectionMaskDabs : f 0.1700
PaintCorrectionMaskDabs : d 0.689590 0.612722
PaintCorrectionMaskDabs : r 0.005442
PaintCorrectionMaskDabs : f 0.1759
PaintCorrectionMaskDabs : d 0.689635 0.615026
PaintCorrectionMaskDabs : r 0.005443
PaintCorrectionMaskDabs : f 0.1742
PaintCorrectionMaskDabs : d 0.689530 0.612581
PaintCorrectionMaskDabs : f 0.1726
PaintCorrectionMaskDabs : d 0.689425 0.610137
PaintCorrectionMaskDabs : r 0.005444
PaintCorrectionMaskDabs : f 0.1709
PaintCorrectionMaskDabs : d 0.689320 0.607692
PaintCorrectionMaskDabs : f 0.1692
PaintCorrectionMaskDabs : d 0.689214 0.605248
PaintCorrectionMaskDabs : r 0.005445
PaintCorrectionMaskDabs : f 0.1678
PaintCorrectionMaskDabs : d 0.689104 0.602803
PaintCorrectionMaskDabs : f 0.1460
PaintCorrectionMaskDabs : d 0.688982 0.602615
PaintCorrectionMaskDabs : r 0.005444
PaintCorrectionMaskDabs : f 0.1525
PaintCorrectionMaskDabs : d 0.689069 0.605061
PaintCorrectionMaskDabs : f 0.1569
PaintCorrectionMaskDabs : d 0.689090 0.607511
PaintCorrectionMaskDabs : r 0.005443
PaintCorrectionMaskDabs : f 0.1625
PaintCorrectionMaskDabs : d 0.689100 0.609960
PaintCorrectionMaskDabs : f 0.1652
PaintCorrectionMaskDabs : d 0.689195 0.612399
PaintCorrectionMaskDabs : f 0.1863
PaintCorrectionMaskDabs : d 0.689113 0.610052
PaintCorrectionMaskDabs : r 0.005444
PaintCorrectionMaskDabs : f 0.1845
PaintCorrectionMaskDabs : d 0.688940 0.607617
PaintCorrectionMaskDabs : f 0.1839
PaintCorrectionMaskDabs : d 0.688743 0.605185
PaintCorrectionMaskDabs : r 0.005445
PaintCorrectionMaskDabs : f 0.1916
PaintCorrectionMaskDabs : d 0.688549 0.602753
PaintCorrectionMaskDabs : f 0.1748
PaintCorrectionMaskDabs : d 0.688555 0.604775
PaintCorrectionMaskDabs : r 0.005444
PaintCorrectionMaskDabs : f 0.1839
PaintCorrectionMaskDabs : d 0.688622 0.607222
PaintCorrectionMaskDabs : f 0.2225
This data results from heavy use of the local adjustment brush. Choosing "Minimize Embedded Metadata" upon export really should solve this problem for you. Please try again specifying this option.
But then, by doing so, you lose any other metadata (keywords etc.) also. To have complete control on what metadata gets written into the JPEG upon export, you could use Jeffrey’s “Metadata Wrangler” Lightroom Plugin.
I noticed one strange thing within the XMP data in your JPEG:
The data seems to be formatted differently than what I see with JPEGs I export ("HasExtendedXMP"), which I don't know where it comes from.
For further investigation, would it be possible for you to upload the Raw file and the XMP file belonging to it to somewhere (e.g. www.yousendit.com) and post a link to it here?
Beat Gossweiler
Switzerland -
Error During INSTALL of Application Export File
An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol ",'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)" when expecting one of the following: . ( * @ % & = - + ; < / > at in is mod remainder not rem <an exponent (**)> <> or != or ~= >= <=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol ",'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)" when expecting one of the following: . ( * @ % & = - + ; < / > at in is mod remainder not rem <an exponent (**)> <> or != or ~= >= <=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard. -
A client has the following problem: When trying to export files in the original Raw format (.CR2), the operation failed and a dialog informs us that "Some export operations were not performed". We can export JPEGs just fine.
After lots of testing, this is what we discovered: The problem does not appear to be catalog-based; we run into the same problem using a test catalog. The export operation works fine, however, with the same test catalog and images on two other machines, and it even works fine on the same machine with a new user admin account that we created.
So it appears to be something associated with the user account, , or with how LR is interacting with the user account, but I cannot figure out what it might be. We can copy the Raw files when using the Finder to do so. But not via Lightroom. Any thoughts, ideas of suggestion would be greatly appreciated! Thanks, SeanAs part of your testing make sure you've tried exporting JPGs from the same folder as the CR2s you're exporting as original, and export JPGs from CR2s to the same folder as you're exporting your originals. This would test LR's read and write permissions from and to the folders being used.
From this document you can see that all the LR files other than the program, are under the /Users folder with different values possible for each user, so the difference could be that the users that work are using the original LR defaults, if you have just started using LR with them after you started having this problem, or at least that the user with the problem has some oddball settings that are interfering with Export as Original.
Preference and other file locations in Lightroom 5
You can test for the Preferences being off by either copying the preferences from a user that has the problem to a user that doesn't have the problem--probably through an external or common folder, or be deleting the preferences file from the user that has the problem and see if it resolves. Moving the preferences file or renaming it may be better than deleting it if no change is seen, then you can restore the preferences back by moving or renaming the file back to the original location and name. -
HOW TO REMOVE HYPHEN IN LAYER COMP EXPORT FILE
HOW TO REMOVE HYPHEN IN LAYER COMP EXPORT FILE IN PNG FORMAT...
I ususally do that type of thing with a state machine... read a token, look for what is next, and if it's the closing token, I don't write it out. You have well defined opening token syntax and closing token syntax, so it should be relatively easy.
-
Schema Import failed :IMP-00008: unrecognized statement in the export file:
Hi ,
I was running a database schema import from a database DMP file.
I encountered the following error in the log file that was getting generated :
IMP-00008: unrecognized statement in the export file:
All the tables got copied except for one. Now what I have thought of is to import that one table again after taking an export from the prod schema.
But what about the functions,triggers,procedures ?? How do i bring all of them in the schema ?
If reimporting the schema again the only option ?
Thanks
KkHello,
In this order:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023988
Table Objects: Order of Import
Table objects are imported as they are read from the export file. The export file contains objects in the following order:
1. Type definitions
2. Table definitions
3.Table data
4.Table indexes
5. Integrity constraints, views, procedures, and triggers
6. Bitmap, function-based, and domain indexes
The order of import is as follows: new tables are created, data is imported and indexes are built, triggers are imported, integrity constraints are enabled on the new tables, and any bitmap, function-based, and/or domain indexes are built. This sequence prevents data from being rejected due to the order in which tables are imported. This sequence also prevents redundant triggers from firing twice on the same data (once when it is originally inserted and again during the import).
For example, if the emp table has a referential integrity constraint on the dept table and the emp table is imported first, all emp rows that reference departments that have not yet been imported into dept would be rejected if the constraints were enabled.
When data is imported into existing tables, however, the order of import can still produce referential integrity failures. In the situation just given, if the emp table already existed and referential integrity constraints were in force, many rows could be rejected.
A similar situation occurs when a referential integrity constraint on a table references itself. For example, if scott's manager in the emp table is drake, and drake's row has not yet been loaded, scott's row will fail, even though it would be valid at the end of the import. -
Imp-00008: unrecognized statement in the export file
Hi All,
I am trying to import an export from Oracle 8.1.7 source system to Oracle 11.2 using imp . I am getting the following errors may times during the import process.
imp-00008: unrecognized statement in the export file
The character set of Source data base is WE8DEC and the character set of target data base is WE8MSWIN1252 and i get the below statement during the start of the import
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8MSWIN1252 character set (possible charset conversion)
export client uses WE8DEC character set (possible charset conversion)
export server uses WE8DEC NCHAR character set (possible ncharset conversion)
The error imp-00008: unrecognized statement in the export file is it due to the Oracle version compatibility or due to Character set compatibility issue.
I tried to create a new Database on same Oracle sever and i cant find WE8DEC in the list of character set to choose. Please help me on how to proceed.
Regards,
alen.934571 wrote:
Hi Srini,
Data is getting loaded correctly, but i get several of these error imp-00008: unrecognized statement in the export file messages during the import process, so i am not sure what is missing.
Pl post the complete error message from the import log file.
1) Is it possible to import the dump exported form oracle 8 into oracle 11?? Do we need to take any special care during the import ??
Yes - no special requirements are needed.
2) The Oracale Database character set it WE8DEC, but when i try to create a new database in 11 , i dont find that character set , is the character set obsolete now , if so what character set is super set of WE8DEC ??
Pl post exact OS and database versions. Ideally you should be using AL32UTF8 for all new databases. WE8DEC is a deprecated characterset.
See section 4.2.1 here - http://docs.oracle.com/cd/E11882_01/install.112/e24186/install.htm#BABFDDEA
Thanks,
Alen.HTH
Srini -
The export file from a calc script - naming and date/time stamp
Here is a simple calc script to export data.
2 questions:
1. Is there an easy way to add a date/time stamp on the name of the data file so that it does not overwrite the older ones every time?
2. I tried to specify the path so that it write to another server. "\\mfldappp011\E:\Exp_AW.txt". It's not working. How should I specify the path ?
Fix (@Relative("Yeartotal",0),"Actual","Working",&ActualYear);
Dataexport "file" "," "C:\Exp_AW.txt" "#MI";
EndFix;
Edited by: user9959627 on Sep 7, 2012 11:25 AMProbably easiest to call the maxl script from a command line script, then rename the exported file to include the tme stamp and copy/move it to a location.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error when exporting file from LR5.2 - file created
After updating to LR5.2, I receive an error when exporting files to another disk drive. a file is created, but a warning appears "Unable to Export: "An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute". I also have CC iunstalled for other applications, but originally installed LR5 as a standalone Adobe application. I tried removing the program and reinstalling through CC, with no change in this behavior.
The answer is in the thread:
http://forums.adobe.com/thread/1303578?tstart=0 -
Error in writing to export file
Hi,
I am getting the below error on running export:-
EXP-00002: error in writing to export file
The query is as given below:-
exp cam3_mpcb2/cam3_mpcb2@ORA10G file='c:\MPCB_cam_20120113.dmp' log='c:\MPCB_20120113.log'
CAn i overcome this error by adding "ignore" at the end of the query or how can i modify the above query ?Are there any other error messages that accompany the one you posted?
EXP-00002: error in writing to export file
Cause: Export could not write to the export file, probably because of a device error. This message is usually followed by a device message from the operating system.
Action: Take appropriate action to restore the device. Do you have permissions to write to this location? -
Large export file when application contains a BI Publisher report
Anyone have an idea why an application export file grows dramatically when a BI Publisher report template is added to an application? I have an application that was 400+ KB and went to 88+ MB just by adding one report query and RTF template. This results in taking over an hour to import the application.
Each RTF Report layout is converted to an ASCII string to allow the import routine to load the rtf as part of the application.
If your template has any embedded graphics e.g. a logo then this SIGNIFICANTLY increases the size of the ASCII encoding of the template.
Hope this helps. -
Error while rendering: Export file not found - what to do?
Hi,
I have been editing my video in four different premiere pro projects (as I got adviced to do from these forums because it's AVCHD clips). I have rendered these four projects and burned to four DVD's (total playtime is around 1.5hours) - which is working fine.
But then I try to import all four projects into one big master project because I want to make a blu-ray iso. The import goes fine (I import like this: File > Import > Choose project > Import entire project)
I export to encore, make the menus etc. and click "build" to start rendering. The problem is that after some time I get this error:
Blu-ray Object: "sequence-name-here/project-name-here.prproj", Export file not found
I have seen this error before while rendering some of the four individual projects - but when I saw them I simply just tried again by exporting to encore from the projects again. This seemed to work - but with the big master project I have tried several times with no luck.
Can anyone help me fix this issue? :)Yes, I got this too:
For posterity, here is what I have found that completely fixes this error, repeatedly: Clear Encore's cache. Specifically:
Close your Encore project and exit Encore
Go to the cache subdirectory named for your project (ie. if your save file is c:\projects\mymovie.ncor then go to c:\projects\mymovie\cache)
Delete the file "mlf.cache.v10"
If your Encore project contains any Premiere Pro dynamically-linked assets, start Premiere Pro and load at least one of the projects used in Encore. (I have found that this reduces memory usage -- for some reason, Premiere Pro takes up less memory than if Encore spawns the PProHeadless.exe media server to serve the same function)
Restart Encore and load your project
...and wait, patiently, for Encore to re-scan all of your assets and build up the cache again and don't touch it until it's finished. I use Process Explorer (http://technet.microsoft.com/en-us/sysinternals/bb896653) to watch my disk activity and CPU to know when Encore is finished (just hover on the cyan-colored graph and you can see what program is performing the most disk activity). Once it's all finished, I save, then immediately try to build my project again. For proof of concept, my 40GB BD-50 project just built last night after getting this error yesterday afternoon.
If any of your assets are not transcoded before you begin this process, transcode them all, then start this process over again from step one. Clearing the cache does not clear the transcodes.
I hope this helps someone. I was not looking forward to completely re-authoring my project, which I've been working on (on and off) for a few months. -
Hi
I want to let you know, that sometimes APEX 3.1.2.00.0 creates invalid export file.
Older apex 3.0 created correct file.
For example: our application has page button, where "Optional URL Redirect" is:
Page: &APP_PAGE_ID.
Request: FLOW_XMLP_OUTPUT_R11531800061044170_et
If we export application into file f110.sql and try to import it to the same workspace on the same server, we get error:
{color:#0000ff}ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 28, column 111: PLS-00103: Encountered the symbol "_" when expecting one of the following: ) , * & | = - + < / > at in is mod remainder not rem => .. <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_ LIKE4_ LIKEC_ as between from using || multiset member SUBMULTISET_ The symbol &a
{color}In exported f110.sql file the invalid section is:
{color:#0000ff}wwv_flow_api.create_page_branch(
p_id=>11762805016890347 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_flow_step_id=> 4,
p_branch_action=> 'f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.:FLOW_XMLP_OUTPUT_R'||to_char({color}{color:#0000ff}{color:#ff0000}*10255206661122183_et*{color}+wwv_flow_api.g_id_offset)||':&DEBUG.:::',
p_branch_point=> 'AFTER_PROCESSING',
p_branch_type=> 'REDIRECT_URL',
p_branch_when_button_id=>11761415275883875+ wwv_flow_api.g_id_offset,
p_branch_sequence=> 10,
p_branch_comment=> 'Created 20-JUUNI-2008 12:05 by XXXX');{color}
If we exported the same application in apex 3.0, this section was correct:
{color:#0000ff}wwv_flow_api.create_page_branch(
p_id=>11762805016890347 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_flow_step_id=> 4,
p_branch_action=> 'f?p=&APP_ID.:&APP_PAGE_ID.:&SESSION.:FLOW_XMLP_OUTPUT_R*10255206661122183_et*:&DEBUG.:::',
p_branch_point=> 'AFTER_PROCESSING',
p_branch_type=> 'REDIRECT_URL',
p_branch_when_button_id=>11761415275883875+ wwv_flow_api.g_id_offset,
p_branch_sequence=> 10,
p_branch_comment=> 'Created 20-JUUNI-2008 12:05 by XXXX');{color}
Best Regards,
TõnuThanks for pointing that out. We'll fix it. It does appear though, that in 3.0, the offset would not be added to the number part of the request value, so if you installed the application as a different application ID or into a different workspace, the request would have failed.
Scott -
The version number of export file in Java Card 2.2 is not correct
Hi all,
I used jdk1.3.1 and java card 2.2's exp2text tool to see the content of an export file. The value of minor_version is 1. But the JCVM 2.2 spec. says it should be 2. So which one is correct?
JoeyRead my post again....indicate binary compatibility or incompatibility between successive implementations of a package.
I can gerenate CAP files generated with JC 2.2., and load onto my JC 2.1.1 cards. AS LONG as I'm not using JC 2.2 implementation.
Run the exp2Text on javacard.framework.service and notice that it should read minor = 2. That's because to use that export, JC 2.2 is minimal required implementation.
Maybe you are looking for
-
Render times very slow on new Mac Pro and Premiere CC
Hi there I have a brand spanking new Mac Pro (specs below) working off a G Studio r 24 TB array. Rendering anything in Premiere is taking an age (2 minutes timeline is taking 30 minutes). I am cutting 4k Sony F5 footage (XAVC). I have done tests wit
-
SUBMIT statement using variant
Hi Gurus, i am trying to use execute a variant , and that variant has to be submitted in memory.(i.e i have three variants A,B,C whenever i run the report using variant A then that fields only has to be passed to memory) , but instead of that , even
-
Hi Everyone! Is there possiblity to link galery album from Picassa to Siena Project? I'm making app with many photos, and I would like to link Picassa album to my app, but I don't know how. I'm using Excel sheet with data.
-
This morning I turned on my iPhone and went into my email. After everything came up, I began deleting the non-essential email and half way down the list, the phone freezes or gets stuck and the only option I have at that point is to either press the
-
Right you prob saw me having problems with this earlier. I think i am making progress. I think i have created two constructors within a class, and for one of these constructors i have initialised a time object to 3.45. What i am stuck on is outputtin