Sharpening for web against sharpening for print

I am new to lightroom and I am trying to establish a workflow for processing my raw images.
I want to accomplish 2 things in regards to sharpening.
After doing all color corections I want to sharpen the image for:
1. web view
2. print through for example mpix service
If i sharpen something for the web view to my liking , how should i export the image for printing?
Where should i add any extra sharpening if any?
What is the best way to accomplish the sharpest image? (assuming it was done in camera correclty in the first place)
thx

Output sharpening for web or print is done in the export dialog. Just choose the particular use. The output sharpening in LR is an excellent tool as it takes into account the size of the file and gives various choices based on particular paper types. You would use sharpen for screen for the web image and sharpening for print for the print...two separate exports as you would also be changing the export sizing smaller for web, obviously. You can also use the print module and print to jpg appling the required sharpening in that module.
If the image requires any creative sharpening over and above what is applied by default then this is done using the sharpening tools in the develop mode and entirely separate process than the export sharpening. Use with caution as over sharpening is an easy mistake to make, ensure you view the results in LR at 1:1 and if applying a lot of creative sharpening do not over compress when exporting the file.

Similar Messages

  • Error message - image exceeds size save for web was designed for

    When I try to Save to Web in Illustrator CS3, I get the following error message: "the image exceeds the size save for web was designed for". Even when I click that I want to go ahead and save it, it sends another error that reads "could not complete this operation. the rasterized image exceeded the maximum bounds for Save for Web".
    Earlier in the day yesterday, I saved for web with no issue. NOw, it doesn't matter how small my design is, it is giving this error.
    Please advise.

    > So in CS3 Save for Web grabs the Artboard, neither the artwork nor the Crop Area/Marks area?
    Creating a new document using "Basic RGB Document" and then "Save for Web & Devices" crops either to the artboard or to the artwork as selected from the "image size" tab in the save-for-web window.
    If your artwork extends beyond the artboard, selecting "clip to artboard" will obviously eliminate everything outside the artboard. Unchecking it will crop the image to the artwork in the file (and thankfully not any artwork that is hidden).
    If you make crop marks in the file, you can choose to either clip to the artboard or not. Not will clip to the crop marks, acting as kind of a secondary artboard.
    ETA:
    You can choose which type of on-screen file type you want your output to be. From GIF, JPG, PNG-8, PNG-24, SWF, SVG, and WBMP. And whether or not you want transparency in those formats that support it.

  • Looking for web(http) frontend for MySQL

    Looking for web(http) frontend for MySQL

    The second url is correct, only that the parenthesis became a part of it. Try http://developer.mimer.com , but it doesn't have anything to do with MySQL anyway.
    You can always look at Sourceforge (http://sourceforge.net/softwaremap/trove_list.php?form_cat=68 to brows among database front ends).
    /Fredrik

  • Exporting for Web VS exporting for DVD

    So here's the story:
    I am pretty familiar with exporting my movies for the web and stuff like compression, etc but I was just asked to burn some of my movies for DVD distribution. As stupid as I am, I sent those guys the files that I use for web distribution and of course I get a reply that goes something like this: "This isn't DVD quality. We need the full movie file, highest quality/bit rate, frame rate, de-interlaced versions of the movie."
    Can someone help me understand what that means??
    If I were to export the movie uncompressed I might as well give up right now. It's all HD. I won't be able to fit even one of my movie files on the biggest hard drive.
    Does anyone know what "the highest quality/bit rate, frame rate" etc. means? I feel like a retard right now.
    Thanks for your help!

    Assuming you are using Final Cut Express, your best bet is to create a master DVD and have a good service provider duplicate the disk.
    In FCE, do the following:
    Make sure everything is rendered:
    *Sequence > Render All > Both*
    *Sequence > Render Only > Mixdown*
    Then save your project.
    Export to QuickTime Movie (not QuickTime Conversion)
    UNcheck the option called "Make Movie Self-Contained"
    Check the option to Include chapter markers (if you have chapter markers in your sequence)
    Save
    Then import the resulting QT reference movie into iDVD and build your DVD project. Burn the finished project to disk and give it to the duplicators.
    If that's not acceptable to them then you should
    1) find another duplication house that will do the work or
    2) get the exact specifications from them as to what they require; if this is the case you will probably need to get an external hard drive that you can use to save the project for them.
    What is the exact nature of your source video? HDV? AVCHD? Something else? Do you have mixed formats in your sequence?

  • Save for web and devices for slices

    I am using CS 5.5.  I have an image that I used the slice tool with.   Sliced about 15 slices.  In my action script, I do all the steps including the slicing and then I go to save for web and devices, choose png format, click save and in the save distination I just put it on the desktop. Close the file and hit stop.  I see that that image created the images folder with all the slices in it.   So I then I run a batch script on the folder that contains about 300 images and I want to  use those slices.  I run the script and nothing appears in the output folder.  It shows that it does all the steps but nothing is showing in the folder.  Is there a step i'm doing wrong?  Please help!

    Window >> Layer comps
    Set this up, and with one click you will be able to toggel whci layers are on or off.
    Out of curiosity, are you programming pages with CSS, dynamic layers or other? You cannot layer slices with transparency on top of each other in standard html. I find it so time consuming and impossible to get things registering correctly for all browsers, so try to minimize any layering technologies.

  • Certification for WEB COMPONENT DEVELOPER FOR J2EE[tm]

    Hi all,
    I'm thinking of getting certified as a
    WEB COMPONENT DEVELOPER FOR J2EE[tm] PLATFORM.
    What is your experience? How do I prepare best for the exam?
    Any book / tutorial particulary useful?
    Thanks for your input!
    Anja

    For what its worth, I found this the easiest of the certifications (compared to Programmer and Developer). My 2 cents of advice includes:
    - Use the Sun objectives as the driver for your study. Review the objectives thoroughly and make detailed notes by section. http://www.javaranch.com/scwcdlinks.jsp has some good examples of this (plus a lot of other useful stuff). The exam is a bit of a memory test - you need to know details of the deployment descriptor, the taglib definition, listeners, the API etc.
    - Take the time to read the servlet and JSP specifications. Although on first sight these are large documents, much of them is reference material and they can be read in a couple of hours. They will help in making the detailed notes.
    - Go over the servlet API for the key methods.
    - If you've not been working with servlet/JSP technologies, read a good book on servlets / JSPs for general background.
    - Try a few mock tests, although there are far fewer available than for JCP. Avoid the ones that charge a fee - I found them less than helpful.
    - This is probably just me, but be careful if you book the test via the web. I did just that, and when I turned up at the test center they had never heard of me. Follow-up with a phone call to the actual center to ensure that they are expecting you.
    Good Luck!

  • Save for web not working for .PNG?

    When I slice up a .psd file and then go file > save for web and select to save the images as .png it does not work for some reason. No matter what I select it only uses jpeg. I am using Photoshop CS2.
    Any suggestions?

    As Zeno said, file format selection is per slice, not a global override. Select al lslices, then pick the PNG options.
    Mylenium

  • Export for Web using optimized for "download" or "streaming"?

    Hi,
    Exporting for Web have some setting there,i'll choosing the .mov - H264 - and medium low quality - 15 Frame Rate - Checked Frame Reordering, others Automatic and the Audio will be 32.000hz and Mono.
    Now,what about the optimizing? Download or Streaming?
    What about Self-Contained Movie? do i need it?

    optimizing for download or streaming depends on what sort of site you're sharing it on. Will it be streamed or a download file?
    It must be self-contained, unless you are going to be streaming it, and hosting it from the machine that the original media is on. Even then I'm not sure that would work reliably.

  • Problem for web service path for Xcelsius engage in flash object

    Hi, All
    I had created one xcelsius through Web Service of SAP B1.it works well.
    but when I run the flash object came from xcelsius by explorer,it gives one message
    "Can not access external data"
    thier I have to give path for swf file and web service path -- (which is given at the time of connection of xcelsius through web service in data manager)
    and I have to run the web service then it shows
    the dash board made from Xcelsius very well.
    but when i change the path of same web service to other m/c then flash file does work and it gives message
    "Can not access external data"
    but in practical my web service path can be changed, it should not fixed for path which is given in data manager in Xcelsius.
    I am using Xcelsius Engage 2008 sp3
    please give suggetions for solve the problem
    thanks in advance

    Hi Venky CRMIT, Bruce007
    Aside from the question, I tried another methods and I have succeeded calling webservice. A reference URL is
    http://www.webbasedcrmsoftware.com.au/crm-on-demand-tutorials/65-java-access-to-crm-on-demand#_Toc224720963
    Main cause may be jsessionID as you guess. When I try with EAI, I have send login information and message call at once, so URL may be incorrect.
    Thank you for your help.

  • ResourceBundleProject for Web page composer for labeling custom forms

    Hello Experts,
    We are using EP 7.0.18 WPC 18
    I have created a custom web form for WPC and done KM configuration. It works fine.  We already had some custom web forms which are used.
    For building a bundle file. I have downloaded the par file which we had on portal and imported it to NWDS. Added the three entries for the form I created.
    The entries in WPC.properties file
    cod.xlbl.wpc_custonlinklist=custom link list
    cod.xtit.wpccustomlinkist=custon link list
    xmlb_wpccustonlinklist=custom link list
    xmlb_wpccustonlinklist=custom link list this label has been sucessfully replaced. But, cod.xtit.wpccustomlinkist=custon link list
    label still shows up as
    Please suggest.
    Thanks,
    Raj

    I was deploying par file without source. After deploying it with source. it worked.

  • XML Question for web.xml file for LiteWebServer

    Hi,
    I have no clue of wut tags are required in the web.xml file.
    Currently the following code is in my web.xml file and i am trying to run servlets that are located under web-inf/*.class
    Pls tell me wuts wrong....
    Do i need those mime-mapping tags, session and welcome tags.......... ?
    Right now i just want those 2 servlets to work
    And wut is this encoding ="UTF-8" in the first line of the xml file. Wut does that do... ? ARe there any others
    Any help would b greatly appreciated
    Thanks
    <?xml version="1.0" encoding="UTF-8" ?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app id="WebApp_1">
    <display-name>PDMPortal</display-name>
    <session-config id="SessionConfig_1">
    <session-timeout>60</session-timeout>
    </session-config>
    <mime-mapping id="MimeMapping_1">
    <extension>htc</extension>
    <mime-type>text/x-component</mime-type>
    </mime-mapping>
    <welcome-file-list id="WelcomeFileList_1">
    <welcome-file>index.jsp</welcome-file>
    </welcome-file-list>
    <servlet>
    <servlet-name>HelloWorld</servlet-name>
    <servlet-class>HelloWorld</servlet-class>
    </servlet>
    <servlet>
    <servlet-name>HelloWorldExample</servlet-name>
    <servlet-class>HelloWorldExample</servlet-class>
    </servlet>
    <servlet-mapping>
    <servlet-name>HelloWorld</servlet-name>
    <url-pattern>HelloWorld</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>HelloWorldExample</servlet-name>
    <url-pattern>HelloWorldExample</url-pattern>
    </servlet-mapping>
    </web-app>

    Try putting your servlets in the WEB-INF\classes directory.

  • Save for Web does not open dialog box in PS Elements 8 for Mac

    After opening an image and selecting Save for Web, the Save for Web dialog box fails to appear. I've seen similar reports for PS Elements 6 for Mac, but did not find the same files in those directories. Running iMac with OS 10.6.

    There are many things that only work in an admin account, but if you're willing to take the trouble, you can change the permissions to allow them to work in a standard account. See:
    http://forums.adobe.com/thread/362899
    Note that it's pretty important to run Save for Web one time in the admin account after changing the permissions or it still won't work in the standard account.

  • Width*height vals changing in save for web ??

    Hi all
    I've opened an EPS file in illustrator cs4. And its width & height values are differing with width & height values in "save for web" option.
    For example, normally in width & height boxes shows as
    width : 247.499 pt
    height : 116.524 pt
    but in save for web
    width : 249
    height : 117
    I've checked with various figures too.

    Script lan : javascript
    thanks for ur help!
    Actually I've to resize the figure for the width 175, 525, 1400 and the height should change proportionally. So I tried, but I couldn't resize the figures using save for web. Becoz its horizontalScale & verticalScale treats values as percentage. eg. 175 treats as 175%. Then I grouped all items and changed its "width" and foud out the values' corresponding "height" values. But the problem is, exported file's values are changing nearly 3pts.
    could u help on this?

  • Error while generating Static web pages hierarchy for Web Crawler searching

    Hi All,
    When we are trying to generate Static web pages for Web Crawler searching for our B2C application it is resulting in an error :
    u201CUnable to initiate generation of static pages; check logsu201C
    After tracing the log files we found out the below detailed information:
    application [catalogtool] Error in method getResourceAsStream(WEB-INF/cfg/catalog-site-config.xml). The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebMalformedURLException: A resource path must begin with [/]. The error occurred in [].
    at com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl.getResource(ServletContextImpl.java:452)
    at com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl.getResourceAsStream(ServletContextImpl.java:481)
    at com.sap.isa.core.ActionServlet.getResourceAsStream(ActionServlet.java:297)
    at com.sap.isa.catalog.impl.CatalogSite.loadConfigFile(CatalogSite.java:666)
    at com.sap.isa.catalog.impl.CatalogSite.initBackendObject(CatalogSite.java:209)
    at com.sap.isa.core.eai.BackendObjectManagerImpl.createBackendBusinessObject(BackendObjectManagerImpl.java:190)
    at com.sap.isa.catalog.CatalogFactory.getCatalogSite(CatalogFactory.java:261)
    at com.sap.isa.catalog.webcatalog.WebCatInfo.init(WebCatInfo.java:237)
    at com.sap.isa.businessobject.webcatalog.CatalogBusinessObjectManager.createCatalog(CatalogBusinessObjectManager.java:103)
    at com.sap.isa.catadmin.actions.WebCrawlerAction.doPerform(WebCrawlerAction.java:93)
    at com.sap.isa.core.BaseAction.execute(BaseAction.java:212)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:683)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:400)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:276)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:400)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Can anyone assist as to what is getting wrong?
    I have a doubt in specifying the parameters "dumpFolder" & "templateFolder" in catalogtool XCM settings, We need to pass full path of the server directory here. please suggest what exactly has to be passed here.
    Currently i am passing values like this "/catalog/dump"& "/catalog/templates".
    We are running on CRM-7.0
    Thanks in advance.
    Pnakaj.

    Any Updates friends??

  • Error message when saving for web and devices

    I cannot save for web and devices for some reason. I get the error message shown in the screen shot below.
    I'm using CS5 extended, version 12.1, 64 bit. My OS is windows 7.
    It doesn't matter whether it's a JPG file or a PSD, I get the same error message, and I am unable to find a solution so far.

    Hi,
    See if this solution works (from this post):
    regards,
    steve
    26. leonty16,  
      Jun 26, 2010 11:17 AM    in reply to turtle_ 
    Report
    FIXED .....
    OK guys....I had this problem for the longest time & Whenever I tried to use "save to web" feature, I would get the same error.... after a lot of research & finally found a resolution.....
    I wanted to take this opportunity to share the resolution why this feature was not working properly....
    Here is the link where you will find what the problem was...
    http://www.techsupportforum.com/microsoft-support/windows-vista-window s-7-support/235245-solved-error-1324-when-installing-applications.html
    Basically, go to this registry location:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\U ser Shell Folders
    & make sure that your current "my documents" sub folders are set to:
    My Music       REG_EXPAND_SZ         %USERPROFILE%\Music My Pictures    REG_EXPAND_SZ         %USERPROFILE%\Pictures
    My Videos      REG_EXPAND_SZ         %USERPROFILE%\Videos
    Personal         REG_EXPAND_SZ         %USERPROFILE%\Documents
    etc...etc...etc....
    When I fixed my registry...this error went away & I had no problems with it anymore...please post this resolution on the website for others!

Maybe you are looking for