Sharper and readable text compared to L220x

Hello everyone:
My L220x is suffering from really bad blurry text problem.  I've gone through the L220x threads on the subject, and after countless hours of fiddling around with the settings, I've given up. No matter what I try, the text quality remains *bad*. These TN pannels are no good.  Wish I have looked at my friends Dell 2408wfp before I got the Lenovo.. Dell is 1000 better!
Unfortunately, I cannot return the LCD to Lenovo and get a refund.  Any recommandations on what's a good Lenovo display that renders sharper more readable text?
 Any advise on this will much appreciated!  Thnx.

Lenovo L220x is not sharp. It cannot be fixed. I'm changed 6 units and nothing. If you like sharp text do not buy this display. Now i'm happy with HP LP2275 and HP tech service quality is much better at least in Russia.
Message Edited by hlabs on 06-21-2009 09:40 AM
Message Edited by hlabs on 06-21-2009 09:40 AM

Similar Messages

  • Bridge Preview quality is not sharp and is blurred compared to PSE win

    I've been using a Mac for a couple of years but to date have been running PSE 4 on Windows but I migrated this to my Mac so have been running under VMWare Fusion.  This has been working great and allowed me to get up to speed with Macs gradually.
    Now that PSE 8 for Mac is out, I thought I'd give this a try and bite the bullet and swap over to running PSE on the Mac. So now I see that I need to use Adobe Bridge CS4 to manage my photos, keywords, collections etc, as see that there's no 'catalog' in the Bridge - no big deal.
    Previously I use 'PSE 4 Win' to run a full screen slide show and sometimes connect my Mac to my plasma TV via PC VGA connector.  I was always amazed at the quality of the photos on both Mac full screen and TV.
    Now I getting to know Bridge slowly and love the PSE 8 for Mac, however the Full Screen Preview (or Slideshow) quality initially looks acceptable but on closer inspection and directly comparing the rendering in 'PSE4 Win' with 'Bridge MAC' the latter is more blurred on the edges and the colors look more natural in the PSE4 Win.
    I have tried right clicking the photo and 'Purge cache for selection' and looked through Preferences and did try enabling software rendering, and re-started but no difference.  So now I love the new software but can't ignore the poor quality rendering.  PSE8 on the Mac the quality looks better than Brdige (although colors still not that natural), AFAIK know PSE8 Mac can't be used as a full screen slideshow (I can't even find a full screen option)
    I running a MacBook Pro new Aluminium for Nov 2008. So just to restate both apps are Mac and Windows are running on same Macbook.
    I have attached screen grabs from both (look at the edges of grass where it meets water)  - these are at fit to screen resolution (which is what I'd use for a slideshow or full screen peview).
    The photo is a JPEG 4.03 MB, 3840 x 2160 , res 72 ppi,  application: Adobe Photoshop Elements 4.0.

    Thanks for the reply, setting 'monitor size previews' has helped a great deal with the sharpness (surprised this isn't the default!)
    Colours are still a little different - difficult to tell which is most realistic.
    I have attached a new full screen preview.
    As an aside, in desparation I did try out some of photo viewing software on Mac platform in comparison.  Adobe Lightroom 2, Aperture, and Picasa all render fairly simarily, however XNView renders very close to PSE4 on Windows platform - in terms of sharpness and colours.  I quite like the Bridge interface so I think, I'll stick with Bridge.

  • Why iphone 6 front camera get better image (sharp and vivid) compare to 6 plus?

    i compare my 6 plus with my wife iphone 6 front camera quality, and i found that iphone 6 front camera was more sharp and vivid compare to my 6 plus. is it normal or something wrong with my phone? i just bought it 2 weeks back.

    Something is wrong with your phone.

  • Read binary file and convert to readable text

    I have a binary file which i want to read in and then convert it into readable text. How can i do this?

    I have a binary file which i want to read in and then
    convert it into readable text. How can i do this?Your question is a bit too vague to be answered. Here's an example -- suppose a file contains the bitstream 11011110101011011011111011101111. (just four bytes full of bits). If one 'converts' this bit stream using four byte big-endian integral values into a hexadecimal representation, the outcome would be 'deadbeef'. Using a little endian conversion, the outcome would be 'efbeadde'. All three text strings you're reading right now (the binary one, and both hexadecimal versions) are readable representations of the actual bitstream ... which one do you want?
    OTOH, if you want to know what's stored in a .class file (this is a Java forum isn't it?), have a look at 'pjava'; it comes with your SDK.
    kind regards,
    Jos

  • How do I change the size of the tools and the text for the menus in Photoshop?  I need a magnifying glass in order to make out what they are.

    How do I change the size of the tools and the text for the menus in Photoshop?  I need a magnifying glass in order to make out what they are.

    Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
    1.  Open Photoshop.
    2.  Select Preferences from the Edit Menu, then select General.
    3.  Change the HUD Color Picker to Hue Strip (Medium).
    4.  Select Interface from the Preferences menu on the left side of the dialog box.
    5.  Change the UI Font Size to Large in the Text area of the Preferences dialog box.
    6.  Select Experimental Features from the Preferences menu on the left side of the dialog box.
    7.  Select Scale UI 200% for high-density displays (Windows only).
    8.  Click on OK, then Exit/Quit Photoshop.
    9.  Open Photoshop and everything should be readable.

  • Differences between Acrobat 8 and 9 for Comparing two document

    Hi,
    We have huge differences in Acrobat 8 and 9 while doing comparing the two document even both the text are identical. Acrobat 8 comparison document is very easy and effective when compare to Acrobat 9.
    I have attached the Acrobat 9 and 8 comparison screenshots.
    Can we have any other method in Acrobat 9 Professional to show exact text mismatch?
    Thanks & Regards,
    Sudhakar

    Can any one help me in this regards?
    Thanks in Advances
    Sudhakar

  • I am converting a .docx file to a pdf and the text is coming out blurry

    I am trying to convert a .docx file to a pdf and the text keeps coming out blurry. Some sentences seem to be bolded in the pdf as well. All the colored text seems like there's a shadow behind it and all the text in bold seems extra blurry. I am saving the file as a pdf. I tried to print the file as a pdf but it kept crashing. I have adobe acrobat pro and distiller, but I'm not savy about which program does what.
    Thanks for any help!

    If you are trying to convert a Word file, ensure the text is in 100% black only.
    To create PDF's there are hundreds of different combinations that can be used, but only a few will give you a good 'print ready' file, which is what I think you may be after.
    You may have font issues that are stopping the text looking sharp.
    If you have Distiller, you can try to print as .ps (save as postscript), load distiller up and choose one of the high quality settings in the pop down menu.
    If you are working on a Mac you can drag and drop the .ps file direcetly on the dock icon for distiller, or if you are running Windows you will need to navigate to the file via the menu bar (you will need to know where you have saved your .ps file).
    There may be other issues with the original file format that is causing problems with your PDF creation.
    Let me know how you get on.
    Cheers

  • The difference in sharpness and overall contrast between LR5 and LR4 low res. export JPEGs

    Installed the evaluation copy of the LR yesterday and as always compared with the previous version (4.4) of the program. The first and not very pleasant difference was the sharpness of the exported JPEGs in low resolution. In full resolution exports it is not that much noticeable. As you may see on the below photo LR4 export is noticeably sharper than LR5. All the export settings were the same in both versions. I used my saved export preset for both JPEGs. The LR5 exported JPEG is slightly lighter than the one in LR4.4. Both photos look the same in develop mode screen, so the difference is in export processing.
    Would be great to know hear the experience, thoughts and comments of others about it.

    Rufat Abas wrote:
    I also hope that it'll be fixed soon.
    Yeah, all other bugs in Lr5 I've been able to find acceptable workarounds for, but I'm not sure what to do about this one for the mean time - any ideas?
    If no acceptable workaround can be found, then +1 vote: 5.0.1 in a hurry.
    Rob

  • I ask the third time: How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160

    I ask the third time:
    How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160.
    It is unbelievable that such an expensive software does not provide a proper lay out wit a high screen resolution!
    It is also unbelivable that it is not possible to get a qualified employee of ADOBE on the phone in Germany.
    hope of feed back: e-mail: [email protected]

    Chris Cox answered your question here:
    I have PS cs6 extended and a new laptop with screen resolution of 3840x2160. Now all control elements and menues are so small that I can not reed them. How can I make them readable without reducing the resolution of the schreen?

  • Hi, I have used PDF export for some years. One file will NOT convert to readable text in Word.  Some

    Hi, I have used PDF export for some years. One file will NOT convert to readable text in Word.  Some headers and maps in this document are converted OK but the body text is garbled. I have tried converting to Docx, Doc and RTF with no success. I disabled OCR and it made no difference. What can I do please?
    Les

    Hi,
    Can you please provide me the file with which you are facing the issue.
    Thanks

  • Safari displays PDF as non-readable text

    Recently when I open a PDF file in Safari it displays as non-readable text. How can this be fixed?

    After some further research I resolved the problem.  The Adobe Acrobat Reader installation was indeed the culprit.  I had to unlock and allow myself to access as a root user on the Mac.  Then I searched the \Library file for the "Internet Plug-ins" folder.  I created a new "Internet Plug-ins Disabled" folder and moved the following 2 Adobe plug-in files 1.  AdobePDFViewer.plugin; 2. AdobePDFViewerNPAPI.plugin to the Disabled file I just created; or you can move those two files into the trash folder.  Either way should work.  I did actually have to do both, becasue the 2 files copied rather than moved.   Most important after performing this task REMEMBER to LOCK the root user before resuming normal work on your computer.  Root user access has a lot of power and can yield a lot of havock if you inadvertently forget and have left in unlocked.

  • Font saved to pdf from download looks bad while photo's are sharp and clear. How do I fix this ?

    As a paid subscriber to a newspaper archive service, I can access, download and save articles. However while the photo and text download is sharp and clear,  the pdf text is thin, unclear  and difficult to read. The photo's in the pdf are just as sharp as the download. How can I fix this ?

    Yep and you can manage the other file types in the Application settings in Preference/Options as you have done before.
    There is also a nice add on for previewing both types, I think. [https://addons.mozilla.org/en-US/firefox/addon/pdfjs/?src=search]

  • Video changes between sharp and blurry

    I have noticed in past exported videos I put onto DVD that text would be sharp and then blurry and then back to sharp again.
    Today I am exporting a project in HD. There is video content with words beside it. At first the words are very sharp and then they go blurry and then sharp again.
    Any insight? Could it have anything to do with old preview render files? Should I trash them all and try it again? Any other ideas?

    sure enough it is a problem with past render files. I trash all of them and re-exported, now with perfectly clean text all the way through.
    I believe that from now on I will be trashing all of my render files before exporting any video. Does anyone else do this regularly? Occasionally I've had an actual glitch in a render file where the image was really jacked up, but not something so small that it goes unnoticed half the time, like text changing from blurry to not blurry.

  • My Intensity II phone often receives texts as all symbols or group messages as blank screens. How can I convert these to readable texts?

    My Intensity II phone often receives texts as all symbols or group messages as blank screens. How can I convert these to readable texts?

        Intensity2user,
    Being able to read your texts is really important and we'll be happy to help you get them working correctly. How long has this issue been going on for? Has texting ever worked correctly for you?
    Also, when you receive texts as all symbols do you know what is contained in those texts? Are there any images in them by chance? Even a smily? If the person sending you the message tries to send it again are you able to read it?
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • Use VBA and Excel to open Dreamweaver HTML (CS5), find and replace text, save and close

    I wish to use VBA and Excel to programmatically open numbered Dreamweaver HTML (CS5) and find and replace text in the code view of these files, save and close them.
    I have  5000 associations between Find: x0001 and Replace: y0001 in an Excel sheet.
    I have the VBA written but do not know how to open, close and save the code view of the ####.html files. Please ... and thank you...
    [email protected]

    This is actually the code view of file ####.html that I wish to find and replace programmatically where #### is a four digit number cataloguing each painting.... In 1995 I thought this was clever... maybe not so clever now :>)) Thank you for whatever you can do Rob!
    !####.jpg!
    h2. "Name####"
    Oils on acrylic foundation commercial canvas - . xx X xx (inches) Started
    Back of the Painting In Progress </p> </body> </html>
    Warmest regards,
    Phil the Forecaster, http://philtheforecaster.blogspot.ca/ and http://phils-market.blogspot.ca/

Maybe you are looking for