Sharpoint designer 2013 crashes when Workflow People/Group Selection after adding AAM

I have same issue as mention in this post. Sharpoint
designer 2013 Stopping when Workflow People/Group Selection. SharePoint designer crashing after selecting peopicker in workflow. This is happening after adding AAM url.
And also as answer mentioned My website has same thing. like http://<systemname> as
Default and http:\\mycompany.com as
intranet.
And aslo I opened in website in designer is http://<systemname> .
It used to work before I adding AAM url. Now it is not working.
ItsMeSri SP 2013 Foundation

Hi,
Please check ULS log for more information about error to help narrow down the issue.
If you find error message as "the service '/_vti_bin/spclaimproviderwebservice.svc' cannot be activated due to an exception during compilation, The exception message is: This collection already contains an address with scheme http, There can be
at most one address per scheme in this collection.
http://xblogs.kompas-xnet.si/post/SharePoint-Designer-2013-Crashing-when-using-select-peoplegroups-from-SharePoint-site.aspx
Then the issue might be caused by more than one IIS Site Binding in single web application.
Please firstly remove AAM settings following the steps below:
In IIS manager, remove the added url binding from IIS site for SharePoint web application.
In CA, remove url under AAM settings and execute IISReset. Now you can check if the issue is resolved.
If you need to configure AAM for your web application, please extend web application and set AAM on the extended web application.
Regards,
Rebecca Tu
TechNet Community Support

Similar Messages

SharePoint Designer 2013 crashes when creating a custom workflow...

I have never had this problem with SPD2010 and the default workflow 2013 templates do not provide the features that I need so creating this workflow using the online UI is not an option.
I have uninstalled SPD2013 two times now and I have tried creating a new list and I still have the problem. It's critical for my project that we are able to create custom workflows so this is a HUGE blocker for me so any help would be appreciated.
Thanks
Rick

Did you ever get a response?

Sharepoint Designer 2013 cannot send email to group

Have a nice day, all!
I have got a trouble with Sharepoint designer 2013 - I can not send email from workflow to Sharepoint group users. It's the same trouble that describe
here Please, look at the pictures there.
http://sharepoint.stackexchange.com/questions/67688/sharpoint-designer-2013-stopping-when-workflow-people-group-selection
Thank you!

Hi
when you create the workflow select 2010 workflow
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Sharepoint Designer always crashes when using the Sharepoint people/group picker in a Workflow

SharePoint designer 2013 (sp1) crashes consistently when doing the following:
Create workflow
Create email action
In the email To field select People/Groups from SharePoint site
SharePoint Designer crashed and says "Microsoft SharePoint Designer has stopped working"
This issue has been reported before in SharePoint 2010 on TechNet as a bug in the software, but with no proper resolution. I am very surprised that it is still an issue in 2013 version (sp1 which was released Feb 2014) and Microsoft have not tried
to address this.
I have read elsewhere that the fix for this is to only have a single IIS binding for the site being used (ie not have additional alternate access mappings). However this is not possible for us as we need the additional alternate access mappings.
Any help/suggestions gratefully received.
Thanks
Bill W

One way is as you mentioned try the below link
http://xblogs.kompas-xnet.si/post/SharePoint-Designer-2013-Crashing-when-using-select-peoplegroups-from-SharePoint-site.aspx
Instead of setting people picker's Return field as "As String" could you please try setting the return field as Email Address
Destin -MCPD: SharePoint Developer 2010, MCTS:SharePoint 2007 Application Development

SharePoint Designer 2013 cannot access workflows in Office 365 Site

I have an Office 365 SharePoint site with a number of workflows that I have created on my machine with SPD 2013. After a number of weeks I was unable to access the workflows from my machine through SPD (while still being able to access pages, site assets
etc.), getting the following error: (Am restricted from submitting images)
"Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities"
Restarting SPD doesn't help, after clicking OK I get the "SharePoint Designer cannot display the item" screen, prompting me to refresh.
When I do refresh, I get the following:
"Windows Workflow Foundation, part of .Net Framework 3.0, must be installed to use this feature"
This is happening on my machine, Windows 7 64 Bit, SPD 2013 64 Bit, but on a colleague's machine, Win 7 64 Bit, SPD 2013 64 Bit I can access the workflows.
I get the same error if I try to create a new Workflow on my machine but I can create it on my colleague's machine.
I downloaded SPD 2013 on a 32 bit laptop I have access to, in which I can create a workflow. One existing workflow can be accessed, updated etc. with no issue, one opens to a prompt to "Insert a stage" and one tells me that it "Failed to load
the workflow definition for the workflow", then the "SharePoint Designer cannot display the item" screen. All of these workflows can be accessed from my colleague's machine.
Here are the actions that I have taken to date on my own machine:
Cleared the caches multiple times
Checked for updates
Installed .Net Framework 4.5
Re-installed .Net Framework 4.0 (which contains 3.0)
Uninstalled and re-installed SPD 2013
Due to issues with a workflow on the site I am in contact with MS Support who are aware of this issue, they sent me a link to a hot fix that was already installed but they have no concrete idea of what might be going on.
I was convinced that it was an issue on my machine, but I don't know what the issues that I have seen on the 32 bit SPD on the new laptop mean.
I have been searching the internet for a fix with no success, I would appreciate any help.
Thanks
Mick

Hi,
According to your post, my understanding is that SharePoint Designer 2013 cannot access workflows in Office 365 Site.
There was an issue recently when a service release was implemented that incremented the version number in the HTML header on some SharePoint online sites to '16' when SPD was expecting '15'.
I suggest to install internet explore 10 and install a patch for IE10. Then test with "open with windows explore" then opened in SPD from sharepoint online.
In addition, I suggest that in SPD go to Account > Switch Account and type in the credentials of the site you are trying to open (it defaults to your Microsoft Login).
If the issue persists, to troubleshoot this issue, you can uninstall all versions of SharePoint Designer on workstation, clear cache and then reinstalling the latest SharePoint Designer. For the detailed information, you can refer to the
article: http://support.microsoft.com/kb/2794961
Here are two similar threads for you to take a look at:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/15fd1436-3166-4e43-8b22-cdb480091548/cant-open-sharepoint-online-site-in-sharepoint-designer-2013
http://community.office365.com/en-us/forums/154/t/149314.aspx?PageIndex=2
By the way, you can also post the question in Office 365 forum and more experts will assist you.
Office 365 forums
:http://community.office365.com/en-us/forums/default.aspx
More information:
SharePoint
Designer 2013: Server-side activities have been updated:
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Best Regards,
Linda Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Outlook 2013 crashes when PDFMaker add-in is enabled

Outlook 2013 crashes when the Acrobat v.11.0.3 PDFMaker add-in is enabled. Outlook 2013 will automatically disable the add-in.
The Outlook 2013 version is 15.0.4517.1509, 32 bit. Windows 7 Pro 64 bit is the OS.
Below is the screenshot of the Outlook Account Info page.
Any comments or suggestions would be appreciated.

I was having to start Outlook 2013 two times every time I turned on my computer (running Windows 8.1 64-bit). The first time, Adobe Acrobad crashed Outlook, disabled PDF Maker, and closed. The second time Outlook started, told me it disabled PDF Maker, and gave me the option to re-enable. I then click to re-enable PDF Maker.
However, I tried LoriAUC's suggestion #1, to launch Outlook 2013 as Administrator. When I did that, Outlook just started up without disabling PDF Maker and without crashing. And PDF Maker remained availble to use within Outlook. That's the way it should always work.
So, I remember that Outlook ran fine with PDF Maker until this month of February 2014. I wonder what changed, Outlook or Acrobat Standard Edition so that Outlook crashes (unless running Outlook as Administrator).
In the meantime, I wonder how to make Outlook start as Administrator automatically without my having to do any extra steps. Or is there a better fix.

Remote Desktop Crashes When trying to log-in after changing password on the remote computer

Hi.
I use cisco VPN to connect to my work computer.
I can use RDC to connect to any computer on home network without issue.
Yesterday I changed to password on my work computer and now every time I try to log from my home computer RDC crashes.
I've disabled printing/clipboard on local devices and resourses, and I've deleted all the RDC cache files on the computer but I continue to have the same issues.
please help
Faulting application name: mstsc.exe, version: 6.1.7601.18540, time stamp: 0x53c72529
Faulting module name: ntdll.dll, version: 6.1.7601.18798, time stamp: 0x5507b864
Exception code: 0xc0000374
Fault offset: 0x00000000000bf922
Faulting process id: 0x44c
Faulting application start time: 0x01d078d866a9ba25
Faulting application path: C:\Windows\system32\mstsc.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 65a988c9-e4cc-11e4-8a77-f46d04eedf8b
http://answers.microsoft.com/en-us/windows/forum/windows_7-winapps/remote-desktop-crashes-when-trying-to-log-in-after/cc45b7be-62ee-4f83-b50b-db028ee32a7f

Hi hg,
I didn’t found relevant settings in remote desktop connection manager, I checked the “Use multiple monitors when necessary” under tools->options, but seems like it is used for span a full screen over multiple monitors. For now I’d suggest figuring out
why your remote session keeps crushing.
I suspect the crash is not related to password changing, similar cases normally occurs after some local device driver, please try to disable the local printer in Remote desktop connection local resources first.
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC

Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC? I would be grateful for any assistance.
Here's the situation:
-- I recently upgraded from RoboHelp X5 to RoboHelp 8. I upgraded my projects to RoboHelp 8 projects.
-- One large help system I manage is built such that there is one master project and about 25 child projects. Each of these is its own item in the master project TOC.
-- In RoboHelp X5 I never had any trouble deleting these.
-- However now in RoboHelp 8, whenever I delete one (by opening TOC pod, right-clicking on item in question, and clicking Delete), and proceed to "Generate Primary Layout" (MS HTML Help), the generation/compilation process proceeds as far as "Generating full-text search data" and then the whole program crashes!
Am I doing something wrong? Is there a bug in the software? I have installed patches 8.0.1 and 8.0.2.
Once again, I thank you in advance for any pointers.
Matthew Keranen
Jamsa, Finland

That does help - thanks a lot.
Wayne Kroger
State Street Corporation
SQA-Princeton
(609) 580-6264
mail to: [email protected]
The information contained in this email and any attachments have been classified as limited access and/or privileged State Street information/communication and is intended solely for the use of the named addressee(s). If you are not an intended recipient or a person responsible for delivery to an intended recipient, please notify the author and destroy this email. Any unauthorized copying, disclosure, retention or distribution of the material in this email is strictly forbidden.

System preferences crashes when mouse icon is selected. All other icons seem to function.

System preferences crashes when mouse icon is selected. All other icons seem to function.Software is OSX 10.7.5. Update shows software is updated. I tried to reset the PRAM, but it did not help. When resetting PRAM, I did not get a 2nd klaxon on startup.

That implies that the underlying OS is corrupted. Best thing to do is boot into recovery mode and reinstall the OS, unless you have an installer copy. If so, use Pacifist to reinstall the SystemPreferences app.

Outlook 2013 crashes as soon as I select the PDF print dropdown option

Outlook 2013 crashes as soon as I select the dropdown option to print to PDF. It worked fine up until a week ago. I reinstalled my PDF reader, didn't help. I downloaded latest office updates, didn't help.

Hi,
What if you choose Microsoft XPS Document Writer or any other printers from that dropdown?
A lot of problems with Office are caused by third party (non-Microsoft) applications. So please also check behavior in
safe mode to see if it's an add-in issue:
Press Win + R and type "Outlook.exe /safe" in the blank box, then press
Enter.
Please have a try and feel free to post back with any findings.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

SharePoint designer 2013 crashes most of the time, when opening sites. Error: The server could not complete the request.

Hi,
I have few sharepoint 2013 site's, which I am trying to open in sharepoint designer 2013.
After adding the site name in open site and clicking ok, the sharepoint designer crashes. At times the sites open, but 90% of the time, the sharepoint 2013 designer has crashed. I get the message "The server could not complete the request. For
more specific information, click on the Details button".
When clicking on "Details" button, there is a empty box. The error message never gets closed and have to kill the process.
I have tried doing "IISreset" multiple times, which has not helped.
Has anybody faced this issue? How to fix this?
Thanks

Hi Venkatzeus,
Firstly, I need to verify the followings:
1.Whether this issue occurred on a specify SharePoint 2013 site.
2.Whether you have extended the problematic site.
Make sure that your user is a site administrator. If you have extended the problematic site, please add it to AAM.
There are other probable causes for this issue:
1.Anonymous authentication is not configured for the problematic web application in IIS
Fix: Enable Anonymous authentication in IIS
2.Server is running out of memory
Fix: Free up memory on the server
Here are some similar articles for you to take a look at :
http://forums.bitwiseglobal.com/forum/sharepoint/the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-button/
http://tjendarta.wordpress.com/2013/05/24/fix-sharepoint-designer-2013-the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-below/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/11854880-e85d-4e4c-ae9c-0ffd640d33d8/error-the-server-could-not-complete-your-request-while-opening-site-in-sharepoint-designer?forum=sharepointadminprevious
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f93e155e-2c65-4744-a1d0-96cdbd50014d/sharepoint-designer-error-the-server-could-not-complete-your-request
I hope this helps.
Thanks,
Wendy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Switching from text view to visual view in SharePoint Designer 2013 crashes 100% of the time

Whenever I am in SharePoint Designer 2013 and try to switch a workflow from text view to visual view, SharePoint Designer crashes. Text workflows work fine. I have tried any of the solutions that I could find including:
- Removing KB2837633 and 2768006 (neither were installed)
- Installing SharePoint Designer 2013 SP1 (KB2817441)
- Performing a "Repair" on both SharePoint Designer 2013 and Visio 2013
- Clearing the caches in the AppData directory
- Setting Visual as the default mode for workflows to open in (so, not exactly switching, but trying to open it directly in the visual view)
Event viewer reports that it is an issue with Microsoft.Web.Authoring.ni.dll which throws an unhandled exception, System.AccessViolationException.
This is the error message:
System.AccessViolationException was unhandled
HResult=-2147467261
Message=Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Source=Microsoft.Web.Authoring
StackTrace:
at Microsoft.Web.Authoring.Workflow.XamlWrapper.GetStageInfo(UInt32 node, String& name, UInt32& transition, UInt32&
stageContainer)
There is no InnerException.
Can anyone suggest something else to try?
Thanks!

Hi,
I have checked out the links above to no avail. I will keep looking. I have included the details from event viewer below.
Details from event viewer:
Event ID 1001
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: SPDESIGN.EXE
P2: 15.0.4569.1503
P3: 52b0b061
P4: Microsoft.Web.Authoring.ni.dll
P5: 15.0.4531.1000
P6: 51cb6bd8
P7: c0000005
P8: 0012f4b8
P9:
P10:
Event ID 1000
Faulting application name: SPDESIGN.EXE, version: 15.0.4569.1503, time stamp: 0x52b0b061
Faulting module name: Microsoft.Web.Authoring.ni.dll, version: 15.0.4531.1000, time stamp: 0x51cb6bd8
Exception code: 0xc0000005
Fault offset: 0x0012f4b8
Faulting process id: 0xc3c
Faulting application start time: 0x01cf69f7dfc05fc8
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\SPDESIGN.EXE
Faulting module path: C:\WINDOWS\assembly\NativeImages_v4.0.30319_32\Microsoft.W7830ee34#\bed75c80b5bf64ca619a88ad4a48b674\Microsoft.Web.Authoring.ni.dll
Report Id: 45c4e398-d5eb-11e3-8ff3-7054d21a367e

Access 2013 crashed when I export a table from the access

Hi!
Access 2013 always crashed when I export a table from the access to the Database Symfoware.
1、The conditions of the Access 2013 crashed are the follows.
1)Create a table in the Access 2013.
2)Using the ODBC driver of the Database Symfoware to export the table from the access to the Database Symfoware.
2、The Environments are the follows.
1)Access 2013 X64(Version:15.0.4420.1017)
2)Win2008R2 X64
3)Symfoware V11.1 X64
3、The Application log from the Win2008R2 are follows.
ログの名前: Application
ソース: Application Error
日付: 2014/04/18 16:21:06
イベント ID: 1000
タスクのカテゴリ: (100)
レベル: エラー
キーワード: クラシック
ユーザー: N/A
コンピューター: WIN-29UTU2AIK6J
説明:
障害が発生しているアプリケーション名: MSACCESS.EXE、バージョン: 15.0.4420.1017、タイムスタンプ: 0x50674523
障害が発生しているモジュール名: ACECORE.DLL、バージョン: 15.0.4420.1017、タイムスタンプ: 0x506742b7
例外コード: 0xc0000005
障害オフセット: 0x0000000000171f36
障害が発生しているプロセス ID: 0xb6c
障害が発生しているアプリケーションの開始時刻: 0x01cf5ad638668c5b
障害が発生しているアプリケーションパス: C:\Program Files\Microsoft Office\Office15\MSACCESS.EXE
障害が発生しているモジュールパス: C:\Program Files\Common Files\Microsoft Shared\OFFICE15\ACECORE.DLL
レポート ID: 00e87957-c6ca-11e3-ad2c-0050568d2ced
イベント XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-18T07:21:06.000000000Z" />
<EventRecordID>3442</EventRecordID>
<Channel>Application</Channel>
<Computer>WIN-29UTU2AIK6J</Computer>
<Security />
</System>
<EventData>
<Data>MSACCESS.EXE</Data>
<Data>15.0.4420.1017</Data>
<Data>50674523</Data>
<Data>ACECORE.DLL</Data>
<Data>15.0.4420.1017</Data>
<Data>506742b7</Data>
<Data>c0000005</Data>
<Data>0000000000171f36</Data>
<Data>b6c</Data>
<Data>01cf5ad638668c5b</Data>
<Data>C:\Program Files\Microsoft Office\Office15\MSACCESS.EXE</Data>
<Data>C:\Program Files\Common Files\Microsoft Shared\OFFICE15\ACECORE.DLL</Data>
<Data>00e87957-c6ca-11e3-ad2c-0050568d2ced</Data>
</EventData>
</Event>
4、When the access crashed,I got the dump file .Then I use the Windbg got some information from the dump files.
The detailes are follows.
FAULTING_IP:
+58872faf03d6dd84
00000000`00000000 ?? ???
EXCEPTION_RECORD: 00000000001723c0 -- (.exr 0x1723c0)
ExceptionAddress: 000007fee3951f36 (ACECORE+0x0000000000171f36)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
FAULTING_THREAD: 00000000000010b8
DEFAULT_BUCKET_ID: WRONG_SYMBOLS
PROCESS_NAME: MSACCESS.EXE
ADDITIONAL_DEBUG_TEXT:
Use '!findthebuild' command to search for the target build information.
If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols.
MODULE_NAME: ACECORE
FAULTING_MODULE: 0000000076eb0000 ntdll
DEBUG_FLR_IMAGE_TIMESTAMP: 506742b7
ERROR_CODE: (NTSTATUS) 0x80000003 - {
EXCEPTION_CODE: (NTSTATUS) 0x80000003 (2147483651) - {
MOD_LIST: <ANALYSIS/>
CONTEXT: 0000000000171ed0 -- (.cxr 0x171ed0)
rax=0000000001be3598 rbx=0000000000000000 rcx=01cf5d1b0f402a5c
rdx=0000000009cfad30 rsi=0000000006688ef0 rdi=0000000001be35d0
rip=000007fee3951f36 rsp=0000000000172490 rbp=00000000001727a0
r8=0000000009b409d0 r9=0000000006688ef0 r10=0000000000000000
r11=0000000000000246 r12=0000000000000000 r13=0000000001be19f0
r14=0000000009cfad30 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010206
ACECORE+0x171f36:
000007fe`e3951f36 4d3927 cmp qword ptr [r15],r12 ds:00000000`00000000=????????????????
Resetting default scope
PRIMARY_PROBLEM_CLASS: WRONG_SYMBOLS
BUGCHECK_STR: APPLICATION_FAULT_WRONG_SYMBOLS
LAST_CONTROL_TRANSFER: from 000007fee395c095 to 000007fee3951f36
STACK_TEXT:
00000000`00172490 000007fe`e395c095 : ffffffff`ffffffff 00000000`00000000 00000000`01bddaa2 ffffffff`ffffffff : ACECORE+0x171f36
00000000`001727b0 000007fe`e388f8eb : 000007fe`e399dc10 000007fe`e399dc30 000007fe`e399dc50 00000000`000000f9 : ACECORE+0x17c095
00000000`00172b50 000007fe`e388f590 : 00000000`06688ef0 00000000`00000004 00000000`000000f9 00000000`00000000 : ACECORE+0xaf8eb
00000000`00172ba0 000007fe`e388f406 : 00000000`00000004 00000000`000000f9 00000000`11cb1130 00000000`000000f9 : ACECORE+0xaf590
00000000`00172c30 000007fe`e391aee7 : 00000000`00000000 00000000`00173198 00000000`06688ef0 00000000`11cb0998 : ACECORE+0xaf406
00000000`00172c70 000007fe`e3933a72 : 00000000`00400100 00000000`00000002 00000000`00000001 00000000`06688ef0 : ACECORE+0x13aee7
00000000`00172e50 000007fe`e384e5b1 : 00000000`00000000 00000000`11cb0020 00000000`06688ef0 00000000`00000001 : ACECORE+0x153a72
00000000`00172e90 000007fe`e38358d1 : 00000000`000007ff 00000000`06688ef0 00000000`01bd99f0 00000000`00000000 : ACECORE+0x6e5b1
00000000`00173280 000007fe`e38718eb : 00000000`000007ff 00000000`06688ef0 00000000`11cb0000 00000000`00000000 : ACECORE+0x558d1
00000000`00173340 00000001`3f3b0cd2 : 00000000`0a0945c0 00000000`000000fe 00000000`000007ff 00000000`00000000 : ACECORE+0x918eb
00000000`00173430 00000001`3f3b0b9b : 00000000`00173730 00000000`001741e0 00000000`065e5b00 00000000`00000100 : MSACCESS!CreateIExprSrvObj+0x16af32
00000000`00173630 00000001`3f3afcea : 00000000`00173730 00000000`00000000 00000000`00000000 00000000`065e5b00 : MSACCESS!CreateIExprSrvObj+0x16adfb
00000000`001736a0 00000001`3f983140 : 00000000`00174401 00000000`0a3235e0 00000000`0a319aa0 00000000`00179fc8 : MSACCESS!CreateIExprSrvObj+0x169f4a
00000000`00174290 00000001`3f3aabeb : 00000000`00000000 00000000`00000000 00000000`00179f38 00000000`00000000 : MSACCESS!FUniqueIndexTableFieldEx+0x26ab4
00000000`00174530 00000001`3f3a9670 : 00000000`001778e0 00000000`00179f38 00000000`00000031 00000000`00000000 : MSACCESS!CreateIExprSrvObj+0x164e4b
00000000`00177870 00000001`3f3a8c1b : 00000000`00000010 00000000`108c5990 003d0044`00570050 00000000`74ac3f69 : MSACCESS!CreateIExprSrvObj+0x1638d0
00000000`001779d0 00000001`3f5450df : 00000000`0a0945c0 00000000`0000009c 00000000`0a0945c0 00000000`00000000 : MSACCESS!CreateIExprSrvObj+0x162e7b
00000000`00179e30 00000001`3f64e915 : 00000000`43ed8000 00000000`00000000 00000000`3f800000 00000000`00000000 : MSACCESS!FillADT+0x5830b
00000000`0017c450 00000001`3f33b172 : 00000000`00000000 00000000`0006075e 00000000`0017e370 00000000`00000000 : MSACCESS!IdsComboFillOfActidIarg+0xaddf1
00000000`0017d730 00000001`3f33a9ef : 00000000`0017e0a0 00000000`00000b86 00000000`00000000 00000000`0fea0000 : MSACCESS!CreateIExprSrvObj+0xf53d2
00000000`0017d790 00000001`3f33a20c : 00000000`06620400 00000000`00000000 00000000`00000001 00000000`0017e420 : MSACCESS!CreateIExprSrvObj+0xf4c4f
00000000`0017e400 00000001`3f6019cd : 0071023b`007a000a 00000000`00374a30 00000000`00000005 00000000`0000000c : MSACCESS!CreateIExprSrvObj+0xf446c
00000000`0017e850 00000000`06706fd5 : e2504700`aa00ee81 00005d1b`0f2363ea 00000000`0017e9e0 00000001`3f200000 : MSACCESS!IdsComboFillOfActidIarg+0x60ea9
00000000`0017e8f0 00000000`0a30c378 : 00000000`00000000 00000000`00000008 00000000`067069ac 00000000`00000000 : 0x6706fd5
00000000`0017e960 00000000`00000000 : 00000000`00000008 00000000`067069ac 00000000`00000000 00000000`00000008 : 0xa30c378
FOLLOWUP_IP:
ACECORE+171f36
000007fe`e3951f36 4d3927 cmp qword ptr [r15],r12
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: ACECORE+171f36
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: ACECORE.DLL
STACK_COMMAND: .cxr 0x171ed0 ; kb
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS_80000003_ACECORE.DLL!Unknown
WATSON_STAGEONE_URL: http://watson.microsoft.com/StageOne/MSACCESS_EXE/15_0_4420_1017/50674523/unknown/0_0_0_0/bbbbbbb4/80000003/00000000.htm?Retriage=1
Followup: MachineOwner
5、Where the access crashed I used the ODBC trace to get the trace log of the ODBC API.
The ODBC API called by Access before it crashed are the follows.
I also ansysised the log,and I did not find any Abnormal.
Test 1174-10f0
EXIT SQLGetData with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
6
SWORD
-8 <SQL_C_WCHAR>
PTR 0x00000000002C1F20 [
12] "LENGTH"
SQLLEN 62
SQLLEN * 0x00000000002C1E38 (12)
Test 1174-10f0
ENTER SQLGetData
HSTMT 0x0000000009F7C490
UWORD
10
SWORD
99 <SQL_C_DEFAULT>
PTR <unknown type>
SQLLEN 4
SQLLEN * 0x00000000002C1E38
Test 1174-10f0
EXIT SQLGetData with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
10
SWORD
99 <SQL_C_DEFAULT>
PTR <unknown type>
SQLLEN 4
SQLLEN * 0x00000000002C1E38 (-1)
Test 1174-10f0
ENTER SQLFetch
HSTMT 0x0000000009F7C490
Test 1174-10f0
EXIT SQLFetch with return code 100 (SQL_NO_DATA_FOUND)
HSTMT 0x0000000009F7C490
Test 1174-10f0
ENTER SQLFreeStmt
HSTMT 0x0000000009F7C490
UWORD
0 <SQL_CLOSE>
Test 1174-10f0
EXIT SQLFreeStmt with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
0 <SQL_CLOSE>
6、I also did the test with the Access 2010,and with the Sql Srever/Oracle.
The results are the follows.
1) With the Access 2010(X86 or X64) and Access 2013 X86,it successes when I export the table to the DB Symfoware.But only with the Access 2013 X64,the Access crashed.
2)With the Access 2010(X86 or X64) and Access 2013(X86 or X64),using the Sql Srever/Oracle,it always successes .
According to all the descrived above, I wonder if it a bug of the Access2013 .
Could anyone can help me ?
Thanks for any help.

George Zhao
Thank you for your help.
I have already install
the latest patches of the Office 2013.But it doesn't work.It is down also too. And ODBC
drive of Database Symfoware is the newest driver of the Database Symfoware. Now I wonder that
if it si a bug of the ODBC
drive of Database Symfoware,I should fix the bug,but I have analysised the odbc trace log and I do not find any wrongs ,so I think maybe it is a bug of the Access .
I have see many situations about the Access down on the internet .

Outlook 2013 crashes when opening Calendar search result

I have a user who uses her Outlook 2013 calendar extensively, mainly to note for herself when she has spoken to a customer, and creating appointments for when she needs to speak to them again. (This is outside of our policy to note the contact in
MS CRM.) She can have scores of such Calendar items each day.
When seraching for these appointments in her Calendar, she gets the list of results, but Oulook crashes when she tries to open any of them. Sometimes Outlook restarts on its own, sometimes she must relaunch it herself.
Related threads reference a wwlib.dll error, but she is not getting that. It is Outlook.exe itself that is crashing. There are other threads that reference other open windows, or items containing webpages or tables, but these do not apply to her, either.
Event Data (two related entries) contain the following:
OUTLOOK.EXE
15.0.4551.1004
5253ad6f
c0000005
00025b09
19cc
01cef2a610938033
C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE
C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE
77f5e493-5e9b-11e3-9ef4-00219b4a7172
And:
3915849571
1
APPCRASH
Not available
0
OUTLOOK.EXE
15.0.4511.1004
5253ad6f
OUTLOOK.EXE
15.0.4551.1004
5253ad6f
c0000005
00025b09
C:\Users\[username]\AppData\Local\Temp\163947659.cvr C:\User\[username]\AppData\Local\Temp\CVR780F.tmp.cvr
C:\Users\[username]\AppData\Local\Temp\WERA546.tmp.WERInternalMetadata.xml
C:\Users\[username]\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_OUTLOOK.EXE_2e80497b46642ed3f64262bb26bbba2f6ecc_02d1bdd5
0
77f5e493-5e9b-11e3-9ef4-00219b4a7172
0
On answers.microsoft.com, Girish M (Support Engineer who eventally directed me here), asked me to run Scanpst.exe. I would paste the results here, but this window does not seem to allow pasting. A summary description of what it found on her .ost file (no
.pst in use) is basically this:
**Beginning NDB recovery
**Attempting to open database
**Attempting to validate header
**Attempting to validate AMap
**Attempting to validate BBT
**Attempting to validate NBT
**Attempting to validate BBT refcounts
    ??Couldint find BBT entry in the RBT (E025CC)
**Attempting to validate header NID high-water marks
**Beginning PST/OST recovery
**Attempting to recover all top-level objects
    **Store created by biuld: 15.4517
**Attempting to walk all folders
      Failed to add row to the FLT, RowID = 719
      Failed to add row to the FLT, RowID = 6CD
      Failed to add row to the FLT, RowID = 6DE
      Failed to add row to the FLT, RowID = 6D8
and so on, and so on, with a few hundred more FLT RowID errors, finally ending with:
**Attempting to locate any orphaned folders/messages
**Performing Final HMP validation
**Attempting to check top-level objects for consistency
**Updating folder hierarchy
  **Verifying message moves
My understanding of the Scanpst.exe process is that it also disables any addons which might cause crashing, but the issue is still being experienced. Running Scanpst.exe a second time (appending the previous log, although it seemed to actually prepend the
file) only returned a few lines from the top of the result above ending with "Attempting to validate BBT."
Fixes not attempted yet that I have found performing searches include running the Office Repair tool, or checking for KB2817631 (a Word update that is apparently having adverse affects on Outlook, not attempted yet because it seems to be related to the wwlib.dll
error, which is not happening here).
Any thoughts out there? Thanks!

Mavis,
Thanks for the reply. Running Outlook using /cleansharing and
/cleanroamedprefs did not have any effect when used individually or in combination with each other.
Running the Search Index Rebuild option also did not seem to do anything, as the pop-up message indicated that it may take a long time to finish, and yet seemed to finish instantaneously, not giving any indication that the indexing took place. The option
window immediately said "Indexing complete" for 23,755 items.
As to the Outlook Forum, they are the ones who directed me to this forum (you can see the thread on the Answers support page under Office - Office 2013 - Microsoft Office Outlook - Office on Windows 7, under the title "Outlook 2013 restarts when
opening Calendar Search result item" first posted on Dec 11, 2013), as Girish M felt that it might be due to Exchange, and not Outlook. (I have no reports of any of our other users on the same Exchange server having the problem with their Outlook, but
they also do not use it the way this user has been.)
I can repost the issue there, or continue the same thread, if you think the issue lies with them. Was the "Answers" site the improper place to post, perhaps? Should it go in a different thread on Technet instead?
Thanks for your assistance!
Edited to add:
Here are the KBs installed just before or on the date the problem started (12/6/2013):
12/5/2016 (Office updates, all 32-Bit):
Security Update Office 2013 KB2768005
Office 2013 KB2768016
Office 2013 KB2817640
Office 2013 KB2827228
Security Office 2013 KB2837618
Word 2013 KB2817631
InfoPath 2013 KB2752078
Office 2013 KB2817493
Office 2013 KB2760539
Office 2013 KB2827235
Office 2013 KB2827225
Security Excel 2013 KB2827238
Office 2013 KB2760242
Office 2013 KB2817626
Office 2013 KB2817314
Office 2013 KB2760610
Access 2013 KB2768008
Office 2013 KB2738038
SkyDrive Pro KB2825633
Security Office 2013 KB2817623
Office 2013 KB2760267
Visio Viewer 2013 KB2768338
Office 2013 KB2827230
OneNote 2013 KB2810016
Office 2013 KB2827228
Office 2013 KB2767845
Definition Office 2013 KB2760587
Office 2013 KB2726996
Security Office 2013 KB2810009
Office 2013 KB2817316
Word 2013 KB2817631
Lync 2013 KB2817621
Office 2013 KB2760224
Office 2013 KB2726954
Office 2013 KB2817640
Publisher 2013 KB2752097
PowerPoint 2013 KB2817625
Office 2013 KB2760257
Office 2013 KB2817309
Security Outlook 2013 KB2837618
Visio 2013 KB2752018
Office 2013 KB2817490
Word 2013 KB2827218
Office 2013 KB2760553
12/6/2013 (for Windows, all Security):
KB2900986
KB2888505
KB2876331
KB2868725
KB2868626
KB2862152
I listed all updates because there have been reported instances of a Word update causing Outlook to crash, but she is not getting the wwlib.dll error related to that KB. If you are aware of any issues with these updates, and which ones might be worth uninstalling
in an attempt to fix, please let me know.
Thanks again!

Excel 2013 crashes when creating VFP OLE DB Data connection

Hi all,
I don't know how often the DBF format is used in Office but it seems some demand still exists because Microsoft created 64 bit version of dBase ODBC and OLE DB driver (in Access data engine). Then I don't understand why Microsoft ignores its own FoxPro
DBF data format because FoxPro ODBC driver is not supported already and no 64 bit version of VFP OLE DB driver is planned...
I am testing DBF file import to Excel 2013 (32 bit) but it crashes instantly. I have VFP OLE DB driver (the last version), some small DBF file, and I am trying to read it as external data in Excel.
Steps to reproduce (menu prompts are translated, so some differences may occur):
Open empty worksheet
Click "Other data sources" on Data ribbon
Select Data Connection Wizard and from the list of available drivers select "Other" and click "Next"
A list of OLE DB providers installed appears, select Microsoft OLE DB Provider for Visual FoxPro and click "Next >>"
Excel 2013 crashes...
This process works in Excel 2010 and 2007 so the problem must be in Excel 2013...
The question is how to read DBF data in FoxPro format when there is no older Office version available?

To connect to a Visual FoxPro database or table in Excel
Open an Excel worksheet.
From the Data menu, point to Import External Data, and click
Import Data.
In the Select Data Source dialog box, click New Source Data Connection.
In the Data Connection Wizard, select Other/Advanced.
In the Provider tab, select Microsoft OLE DB Provider for Visual FoxPro.
The Connection tab in the Data Link Properties dialog box appears.
To connect to a Visual FoxPro database or table in Word
Open a Word document.
From the View menu, point to Toolbars, and click
Database.
On the Database toolbar, click the Insert Database icon.
In the Database dialog box, click Get Data.
In the Select Data Source dialog box, click New Source Data Connection.
In the Data Connection Wizard, select Other/Advanced.
In the Provider tab, select Microsoft OLE DB Provider for Visual FoxPro.
The Connection tab in the Data Link Properties dialog box appears.
To add a Visual FoxPro database or table folder
On the Connection tab and in the Select or enter a database name box, type path and name of the database or table folder you want.
-or-
To browse for a Visual FoxPro database or table folder, click the ellipsis (...) button to the right of the
Select or enter a database name box to open the Configure Connection dialog box.
Specify a different collating sequence if desired.
To test the connection, click Test Connection. If connection is successful, click
OK.

Sharpoint designer 2013 crashes when Workflow People/Group Selection after adding AAM

Similar Messages

Maybe you are looking for