SHD0-Transaction Variant not correctly hiding screens from tabstrip control

Hello All,
I have created a transaction variant for transaction PPDPIM. It is my intention to hide all tabs on the second screen of the transaction except for one. This is working. However, I find that my results are as follows:
1. The tab I have left as visible is, in fact, visible. All others are invisible. This is good and what I want.
2. For the one visible tab, the subscreen contains the structure/information found on the DEFAULT tab (which is not the same as the chosen visible tab). This is bad.
It would seem that somewhere in the application the default tab is being set and somehow overriding the transaction variant. Has anyone found a solution to this type of problem?
Thank you.

I have used the "Invisible" checkbox on the subscreen screen variant as the only configuration. I marked this check box for 5 of the 6 tabs with outcome as outlined in my first message.
If I include the "default" screen (giving me two visible screens) then both screens display properly. This does not seem consistent.
Has anyone had a similar problem who can give me some constructive suggestions?
Thanks

Similar Messages

Transaction variant not working

Hey,
I am facing with this peculiar problem of transaction variant. I created a transaction variant as desired by my client for VA01 and activated the same. I checked the status in the transaction VA01 and there it showed that the transaction variant has been successfully applied. But when I check for the fields that I wanted to be made non editable or invisible the same was not reflected in the transaction. Now after trying enough like creating new transaction variants, adding new screen variants to the existing transaction variant, somehow it has started working. But now when I change the transaction variant, even after activating it, the changes in the variant are not reflected in the transaction. Old changes are being reflected. Please advise!
The reconstruction steps are as follows:
SHD0 -
Creation of transaction variant - with processing.
Activating it.
Appreciate a quick response. Thanks in advance.
Note: It might be that I am going wrong somewhere, I would really appreciate if someone could send me a file containing screenshots on how to create and use transaction variants. My email ID is
[email protected]
Regards,
Z

hi,
just check out the following pre-requisites if you have followed them or not:
You can assign various transaction variants to individual sales document types.
With the help of transaction variants, you create various variants for the same transaction in order to simplify your transaction flows. You can achieve this by:
Preassigning fields with values
Fading out and changing input availability for fields
Fading out entire screens
In this way, you can provide your users with screens which are defined according to their specific needs per sales document type.
When a transaction variant is created, several screen variants are created for each individual screen for the transaction chosen for the variant. The system accesses this screen variant when a transaction variant is applied.
PrerequisitesIn the standard system, transaction variants for Sales (for example, quotation, sales order, credit memo request, group master contract) are defined for all business objects. Assignment of transaction variants for the sales document type is carried out in Customizing for sales document types.
Activities
You will find the transaction for creating a transaction variant in Customizing, under General Settings - Field Display Characteristics - Configure application transaction fields. You can find further information on this in the implementation guide.
Assignment of transaction variants to sales document types can be found in Customizing for Sales, under Sales - Sales Documents - Sales Document Header - Define Sales Document Types in the Variants field.
In order that a transaction can be called up depending on a sales document type, the system of course needs the information as to which sales document type should be worked with. This choice is however made by the user on the initial screen first.
This means that the initial screen can not be modified or faded out within a transaction variant. If you wish to miss out or modify the initial screen with the choice of sales document types, you need to create a variant transaction, this means a variant is created for a complete transaction. This transaction will then have ist own name, which has been defined by you.
regards,
Siddharth.

How to transport a transaction variant and her related screen variant?

Hello to every SDN member,
I am looking to transport a transaction variant and the related screen variants.
I read the help and I am concerned by the paragraph about the Client-specific transaction variants because when I created the transaction variant, no dialog box appeared.
In the paragraph about the Client-specific transaction variants, it is told to transport the variants with the Transport function but the problem is that I cannot find it. How can I use this function? It is not in the toolbar and not in the differents menus.
Can you please give me the solution to transport the transaction variant and the screen variant?
Thank you very much in advance.
Best regards,
Matthieu Chérier

Hi,
You can transport a variant by :
1. Running the program RSTRANSP. Mention your program and variant name there.
2.Create a variant with prefix 'CUS&'. This type of variants will be automatically transported to target system through transport request.
3.Go to Se38 --> Input report name --> Select Variants
On the screen --> Go to Utilities -> Select transport request
--> Provide the program name and Variant --> Assign Transport request to variant. Then release the transport.
Regards.

My new air 2 iPad will not rotate the screen from vertical to horizontal

MMy new iPad Air 2 will not rotate the screen from vertical to horizontal. Is there a screen lock

There is a screen lock. If the Rotation Lock is on you will see a circular arrow surrounding a small lock at the top of your screen near the battery level indicator. To turn on or off the Rotation Lock swipe up from the very bottom of the screen to being up the Control Center. Look for that same icon and tap it.

Transaction variant not working in quality

Hi,
I have created a transaction varient in SHD0 and activated it in develpoment and then
it is working fine in development system.Then variant transported to quality and there also
it is activated but somehow it is not working in qulaity sytem.
I checked in the respctive transaction with following path
SYSTEM>>>>>STATUS>>>>>SAP REPOSITORY DATA and i can find it is transaction variant name
below screen program.
Pl suggest the resolution.
Regards,
Rushikesh

Hi,
Check the variant is transported properly in QA. If present then check the transaction for the same.
If you make this transaction for a table the check the table delivery and maintenance allowed or not. It should be maintenance allowed.
Thanks
Subhankar

Authorization issue on SHD0 transaction variant in R/3

Hi,
Can anyone help me on the below issue?
Created a transaction variant ZME31K using SHD0 on R/3 system with the base transaction ME31K.
And created a transaction ZME31K for the above transaction variant.
Created one ID which has access only to transaction ZME31K.
But when tried to create contract using ZME31K, it allows to create the contract, but ended up with message "You are not authorized to use ME31K".
Anyone faced similar issue before? how this can be resolved? As per the busniess requirement, they can provide access only to the transaction variant for the user and they will not be assigned to ME31K.
-Thanks,

> We are doing an Upgrade assessment wherein at R/3 side, the system is being upgraded from 4.6 to ECC 6.0.
> I wanted to know the impact the Change in Transactions at R/3 side.. namely transactions..
> AS02, CT02, F-02, F-41, F-49, FB01 would have on BW.
What do you mean? I don't get your question. What impact should those transaction have on BI?
Markus

Can anybody tell me how to use SHD0-tRANSACTION VARIANT

hI,
pL.tell me the procedure to use SHD0 for co01 and CO02 T-CODES

Dear Laxmikanth,
Transaction variant or Screen variant does not works out for T
code CO01 or CO02.
As far I know you can restrict only the plant and order type ,I
dont think you can restrict the user's to change or modify the
BOM Components.
Regards
Mangalraj.S

Edit drop down list in SHD0(transaction variant)

Hello all,
How can we control the values displayed in drop doen list using transaction variant? i am using SHD0 to create a transaction variant and want only few values to be dispayed in drop down list instead of all the values in orignal transaction.
Thanks
Arjun

As far as I konw, you can not.
You can edit the properties (Visible/Invisible, etc ) but not restrict the values originally displayed.
Regards

SHD0 transaction variant for SM30: some FCODEs don't react

Hi,
I have a customizing table which contains data of kind "current settings", so it can be maintained on productiv systems without transport dialog.
At the moment it can only be reached within the customizing (SPRO).
it is maintained via SM30-dialog.
Now I need to maintain it with a normal transaction cause the admin people for the table have no authority to do customizing on productiv system.
I made a transaction variant in SHD0 for SM30. It works except on little thing:
the functioncodes BACK, CANC, don't work.
Any idea, how I could make them work.
At the moment the users has to kill the mode to leave the transaction variant.
Thanx in advance
Hans

Hi Atish,
the maintainance screen ist a transaction variant of SM30. (see subject)
I didn't develop anything on it.
In transaction variants you can only exclude function codes, but I didn't do this.
Thanx for your reply.
Hans

Transaction variant not recognized

I have created a transaction Variant (called ZPRAP_VAR) for transaction PRAP (approval of trips in FI-TV). I have also activated it to be the standard variant.
I have created a variant transaction (called ZPRAP) for the PRAP transaction with variant ZPRAP_VAR. When I call the variant transaction ZPRAP from Workbench, the transaction variant ZPRAP_VAR is not being called automatically.
I have to pick the tx variant from the "Get Variant" menu explicitely. Any idea why?

Hi,
Look at the below link
http://www.sap-basis-abap.com/sapbs010.htm
You need to give the Z transaction code for the transaction variants, and select the appropriate checkboxes then Save and activate it,
Regards
Sudheer

SHD0 - Transaction variant

Hi friends,
Can anyone tell me the transaction variant for VL01N. I want to change the BATCH field to display mode. So I when I am looking for transaction variant by F4, its giving message like ' no values for this selection' . Or else can I create screen variant of my own? If I created then what next? shall I assign that variant somewhere or it will apply automatically? Generally I did for VA01 before for some fields by taking the transaction variant which starts with BUS...... So now what to do for this? Please explain me clearly?
regards
Rama rao

Hi,
Just go to "Screen Variants" tab and enter the Screen Variant as BUS2032_4480, Program as SAPMV45A and Screen as 4480.
Regards
SD
Edited by: Samier Danish on Jan 7, 2008 11:51 AM

SHD0 -- Transaction variant for specific users

Dear All,
I want to change label text for VA02 using GUIXT.
I have created Group ZGROUP1 and the transaction variant is ZGROUP1VA02. Then I have activated the variant. It is supposed to change the label for the users belong to ZGROUP1 but it is changing for all users.
Please advice and thanks in advance.
Regards,
Maysara Salah

Hi after creating the group and variant , you need to add the users in that group under user assignment tab and after entering the user name just click assign and then click set proposal.
Note: Do not activate the variant. (If you activate it , the changes will be affected for all users)
Thanks & Regards,
Madhumahesh.

Transaction variant not assigned

Hello Sir,
While I am posting the payment/receipt document in FBCJ (Cash Journal) I have got the error as - No accounting transaction variant assigned to FBCJ/K3. Where K3 is the document type.
BSR

hi BSR,
Pls check in OBA7 whether u have created the Document type and it is assigned in Tcode FBCJC1. If it is not assigned pls assign to it......
if it is usefull..assign me the points...
ranjit

Robo HTML 9 will not open our project from Source Control after initial start.

We have a project in version control that we have been using forever, since 2003 or so and many versions of RH. Now that we have upgraded to 9, this project will open the first time in version control and work normally. Once you close the project and attempt to reopen from the starter screen, it opens just great, just not in version control. The files are still set to read only. I have done this several times and the only way i can work on my project in version control is to act like i am opening a project from scratch, then it needs to overwrite all of my local files with the server files. It would not be so bad but I am 3000 miles away from the server and 13 hops plus a slow firewall on the other end. While this has never been a problem in the past it is a big problem because it takes hours for all the files to download and overwrite my local files.
This only happens with RH9 and Version Control 3.1. RH8 works no problem. So, I don't know if this is a RH9 starter problem or a Source Control Problem. Maybe I will make a similar thread in the RH area. I'll wait to see if I get any useful hits from this one first.
It is very strange, I had RH9 open for several days because I was afraid to close the project for this reason and yesterday I published for the month so the heat is less right now but today, it opened with no source control. If I go to Source Control the only thing i can select is put project in source control. That is how it got into source control after converting to RH9.
We have another project that seems to open from version control normally but we can only save topics in HTML view. No useful answers to that topic after a week.
Got any ideas???
I have tried different folder names, different paths, etc.
Thanks,
dv

Ok, here is a wierd one, I used the add to version control icon in the menu bar, It already knew the path so I figured I'm the only one who has been editing these files for the past few days so I clicked add to version control. It added it. I closed and reopeded and still had the same files checked out. Closed, checked in all, then reopened and it is working in SourceControl. Strange that after opening from source control and closing that you need to reopen and tell it to put the project into source control. Obviously some flag is not getting set somewhere. This might help others having problems reopening source control files.
dv

Workflow: call transaction CJ20N not displaying customized screen

Experts,
My workflow needs to call transaction CJ20N. so that the user can accept a customized field on the project display. When I called the transaction, I did not see the customized fields on the display. I need to call transaction CJ20N that will display all the fields that have been customized on the screen display. I am not using SET PARAMETER before I make the call as it was unclear to me what the SET PARAMETER is used for.
Any clue would be appreciated.
thank you
david Dittmer

Hello Modak,
I agrree that a parameter ID will not solve this issue. To test I built a stand alone ABAP program with the following code:
data: bdcdata_wa typr bdcdata,
bdcdata_tab type table of bdcdata.
clear bdcdata_wa,
bdcdata_wa-program = 'SAPLCNPB_M'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
append bdcdata_wa to bdcdata_tab.
bdcdata_wa-fnam = 'PSP'.
bdcdata_wa-fval = 'P.2009.00002'.
append bdcdata_wa to bdcdata_tab.
Call transaction 'CJ20N' using bdcdata_tab.
This call works just fine in a stand alone ABAP but will not work in a workflow method....any suggestions or clues
Thank you

SHD0-Transaction Variant not correctly hiding screens from tabstrip control

Similar Messages

Maybe you are looking for