SHD0 - Transaction variant

Hi friends,
Can anyone tell me the transaction variant for VL01N. I want to change the BATCH field to display mode. So I when I am looking for transaction variant by F4, its giving message like ' no values for this selection' . Or else can I create screen variant of my own? If I created then what next? shall I assign that variant somewhere or it will apply automatically? Generally I did for VA01 before for some fields by taking the transaction variant which starts with BUS...... So now what to do for this? Please explain me clearly?
regards
Rama rao

Hi,
Just go to "Screen Variants" tab and enter the Screen Variant as BUS2032_4480, Program as SAPMV45A and Screen as 4480.
Regards
SD
Edited by: Samier Danish on Jan 7, 2008 11:51 AM

Similar Messages

Authorization issue on SHD0 transaction variant in R/3

Hi,
Can anyone help me on the below issue?
Created a transaction variant ZME31K using SHD0 on R/3 system with the base transaction ME31K.
And created a transaction ZME31K for the above transaction variant.
Created one ID which has access only to transaction ZME31K.
But when tried to create contract using ZME31K, it allows to create the contract, but ended up with message "You are not authorized to use ME31K".
Anyone faced similar issue before? how this can be resolved? As per the busniess requirement, they can provide access only to the transaction variant for the user and they will not be assigned to ME31K.
-Thanks,

> We are doing an Upgrade assessment wherein at R/3 side, the system is being upgraded from 4.6 to ECC 6.0.
> I wanted to know the impact the Change in Transactions at R/3 side.. namely transactions..
> AS02, CT02, F-02, F-41, F-49, FB01 would have on BW.
What do you mean? I don't get your question. What impact should those transaction have on BI?
Markus

Edit drop down list in SHD0(transaction variant)

Hello all,
How can we control the values displayed in drop doen list using transaction variant? i am using SHD0 to create a transaction variant and want only few values to be dispayed in drop down list instead of all the values in orignal transaction.
Thanks
Arjun

As far as I konw, you can not.
You can edit the properties (Visible/Invisible, etc ) but not restrict the values originally displayed.
Regards

Can anybody tell me how to use SHD0-tRANSACTION VARIANT

hI,
pL.tell me the procedure to use SHD0 for co01 and CO02 T-CODES

Dear Laxmikanth,
Transaction variant or Screen variant does not works out for T
code CO01 or CO02.
As far I know you can restrict only the plant and order type ,I
dont think you can restrict the user's to change or modify the
BOM Components.
Regards
Mangalraj.S

SHD0 transaction variant for SM30: some FCODEs don't react

Hi,
I have a customizing table which contains data of kind "current settings", so it can be maintained on productiv systems without transport dialog.
At the moment it can only be reached within the customizing (SPRO).
it is maintained via SM30-dialog.
Now I need to maintain it with a normal transaction cause the admin people for the table have no authority to do customizing on productiv system.
I made a transaction variant in SHD0 for SM30. It works except on little thing:
the functioncodes BACK, CANC, don't work.
Any idea, how I could make them work.
At the moment the users has to kill the mode to leave the transaction variant.
Thanx in advance
Hans

Hi Atish,
the maintainance screen ist a transaction variant of SM30. (see subject)
I didn't develop anything on it.
In transaction variants you can only exclude function codes, but I didn't do this.
Thanx for your reply.
Hans

SHD0-Transaction Variant not correctly hiding screens from tabstrip control

Hello All,
I have created a transaction variant for transaction PPDPIM. It is my intention to hide all tabs on the second screen of the transaction except for one. This is working. However, I find that my results are as follows:
1. The tab I have left as visible is, in fact, visible. All others are invisible. This is good and what I want.
2. For the one visible tab, the subscreen contains the structure/information found on the DEFAULT tab (which is not the same as the chosen visible tab). This is bad.
It would seem that somewhere in the application the default tab is being set and somehow overriding the transaction variant. Has anyone found a solution to this type of problem?
Thank you.

I have used the "Invisible" checkbox on the subscreen screen variant as the only configuration. I marked this check box for 5 of the 6 tabs with outcome as outlined in my first message.
If I include the "default" screen (giving me two visible screens) then both screens display properly. This does not seem consistent.
Has anyone had a similar problem who can give me some constructive suggestions?
Thanks

SHD0 -- Transaction variant for specific users

Dear All,
I want to change label text for VA02 using GUIXT.
I have created Group ZGROUP1 and the transaction variant is ZGROUP1VA02. Then I have activated the variant. It is supposed to change the label for the users belong to ZGROUP1 but it is changing for all users.
Please advice and thanks in advance.
Regards,
Maysara Salah

Hi after creating the group and variant , you need to add the users in that group under user assignment tab and after entering the user name just click assign and then click set proposal.
Note: Do not activate the variant. (If you activate it , the changes will be affected for all users)
Thanks & Regards,
Madhumahesh.

Transaction Variant for SHD0 in CAT2

Hi,
We have a requirement to default the wage type in CAT2 screen. Is it possible to accomplish this using the SHD0 transaction variant. The wage type appears in the table control in the CAT2 screen .Kindly advice.
Regards,
Prabaharan.G

Solved by Own.

SHD0 Transaction Authorization

Hello,
We need to deactivate certain fields in CV02N document maintenance transaction (DMS) for specific document types.
For all other document types, all the fields of the transaction are required.
We are using SHD0 transaction in SAP to create a new Z* transaction.
All users need to have access to both ZCV02N and CV02N..
However, through CV02N certain document types need to be blocked.
Is it possible to have the authorization object assigned to a SHD0 transaction variant different from the original transaction itself?
Is there any other approach that we can consider?
Thanks & Regards,
Sana.

Hi praveen,
SHD0 is used to create and maintain Screen and Transaction Variants..
to know more about Screen and trransaction variants click on <a href="http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/frameset.htm">this link</a>
<b>Reward Points for useful Answers..</b>
Regards,
Tejas

Screen variant not working when assigned to transaction variant in SHd0

Dear All,
User requires tax code column for line items in MIRO to be made non-editable. I am using SHD0 transaction for the same. I am able to make the column grey-off by creating screen variant. The program is SAPLMR1M and screen number 6310. When tested individually thru SHD0 the variant is working perfect. But it is not working when assigned to a transaction variant. Any clues on the same would be really helpful.
Thanks in advance
Komal

Hi,
Try to record again for the whole set of screens instead of doing that for the individual tax screen and only for the tax screen make the required field disable.
Once done and saved, you can see all the screens variants in the transaction variant.
Use the Change WITH PROCESSING OPTION.
Hope this solves your problem
Regards
Shiva

Problem in SHD0 about creation of Transaction Variant for VA02

Hi All,
My goal is to create a Transaction Variant for VA02 Variant that doesn't display the "Object Status" button under the page "Status" in the Header of Sales Orders.
To do so, I created a Transaction Variant in SHD0 (named ZTEST_VA02), the creation process creates the Screen Variants too, and i named them ZTEST_VA02_<dynpro_number>.
The Dynpro where I can found the button to hide is the SAPMV45A / 4305, so the Screen Variant Name is ZTEST_VA02_4305.
My problem is that If I test the single Screen Variant (ZTEST_VA02_4305) using the button in SHD0, I can see the whole transaction with my modify (the "Object Status" button is hidden), but testing the entire Transaction Variant ZTEST_VA02 I cannot see the modify and the Button is pretty visible.
I even tried to create a Transaction with Variant, in SE93, that launches the transaction VA02 with the variant ZTEST_VA02, and I tried to assign the Transaction Variant I created as a Standard Variant, in both cases the problem is that the modify doesn't appear to be applied.
For me this is a real mistery because If the Screen Variant is right (It works) I would expect to see that even the Transaction Variant is correct.
Does Anyone have (or have ever had) this problem?
Thank You very much for your attention.
Regards,
Claudio
PS: I forgot to mention that I'm working on SAP ECC 6.0
Edited by: Claudio Distrutti on Apr 4, 2008 11:47 AM

I too facing the similar problem when assigning the screen variant to transaction variant.
screen number where the 'Obj.Status' button is ' 4456
if executing the screen variant alone , it works perfectly,
once i assing to the transaction variant and test, the 'Obj.Status' button is visible.
does anyone got the solution?
Edited by: Thomas Paul jr on Oct 21, 2010 1:59 PM

Transaction variant SHD0

Hi Friends,
When I am tryin to change the fields in VA02 to 'output only' through SHD0, it is not working. I have created my own Transaction variant and activated it. Still its not working. But I did the same thing in VL02N it is working there.
Can anyone explain me whats the problem in VA02? or any other alternative for this.
Friendly
Rama rao

Thank you rajan,
My intention is to put the incoterms and payment terms in the main screen as display mode (output only). From SHD0 after giving the sale order number and pressing enter we will go inside. (There we will see Incoterms and payment terms in general header box.) After pressing enter again we see popup box for this window to make the changes, if we keep on pressing enter we will get the pop up window where these payment terms and incoterms will be there. In that window we will put tick for output only to these two fields and will keep pressing enter until we go to the last screen and will click the 'save and exit' button.
Thats it na. Or else we have to touch the header and line item tabs also? What do you mean by touch all the screens. Thats what I did na or to do anything more?
Please explain me clearly.
Rama rao

SHD0 and VA01 transaction variant: Changes not showing in Test mode

Hi,
I am trying to create a transaction variant using SHD0 for VA01 and VA02 that will grey out the PLTYP field in screens 4301 and 4900.
Everytime I go through the process and exit and save it looks fine, but when I test the variant, the fields are still editable, even though my variant shows them listed as Output Only checked off for the aforementioned screens
I am using the following:
T_Code for variant: VA01
Variant: copy of BUS2032 renamed Z_BUS2032_KPW.
screens to be affected : 4301 and 4900.
I do not want to override the default variant. I am currently in R/3 4.6c.
Any help other than links to the SAP help website (which I have exhausted) would be greatly appreciated.
Thanks,
Kevin Webb
www.innovapost.com

Hello Sai P,
HELP!
I have a similar situation: VA01 running standard and ZVA01, with a hidden field, once I assigned NO_VARIANT to the Order type ZVPV, it is working as desired. However, one strange thing is happening... when I enter ZVA01 and assign the order type ZVPV (which has NO_VARIANT at VOV8) I enter and the field is hidden this all good, then I go back to the screen were the order type is assigned and then I choose another order type ZTA (which has variant in VOV8 in blank) and the hidden field shows, all good as well. However, when I go back again to the order type screen (without going back to the menu screen) and choose again ZVPV and enter the field is showing. Any idea?
Regards.

Default the transaction variant created in SHD0 for MIRO

Hi,
We have a requirement where the subsequent Dr/Cr field in MIRO must be invisible.
Used SHD0 and created transaction variant and activated the same in standard variant.
1. The variant is showing up in MIRO but it is not defaulting.
2. How can we transport the same to different clients as transport request is not populated on saving.(Saved as local object).
Appreciate if you can please guide me.
Thank you

Hi:
In SHD0 , have you activated the z screen variant to the transaction variant you created for MIRO....
Regards

Transaction Variant thru SHD0 issue

Hi,
We have created a Transaction Variant for VL01N --> de-activate Post Goods Issue button thru tcode SHD0.
Now issue is that it effect of other client also.
Means we have 3 clients on same server. and ab above requires only on single client. But if also de-activate on others.
How can I do the same for single client.
Please guide.

Even though user can able to do PGI thru VL01N tcode
If your project have a Security team and they have done this, I don't think, it is possible. If you have authorization to SUIM, execute it, click on Roles > By Authorization Object. There check once again for that user whether they got the authorization. If you don't have authorization to access SUIM, then execute UST12 table through whichh also you can check.
G. Lakshmipathi

SHD0 - Transaction variant

Similar Messages

Maybe you are looking for