SHDO - add column in table control in CRMD_ORDER

Hi,
is it possible to add a EEWB generated column to table control (on the first screen)
in TCODE CRMD_ORDER ?
did anyone ever do that ?
thank you,
Regards,
michal

hehe
it would be great to get feedback on everything here but I'd better obey the forum rules
too many opened forums and I sometimes get a little lost
Regards,
michal

Similar Messages

How to add column in table control for transaction APPCREATE

Hi All,
How can i add the additional column in table control for transaction APPCREATE.
There is structure PT1045_EXT present behind table control. But not found any customer exit or badi to display on screen.
Please help...

You can add new columns
If you add new columns in tr. PHAP_CATALOG

How to add a column in table control

Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Can anyone help me on this please.
Thanks in advance.
Regards,
Lakshmi.

Hi,
Ensure the following :
1. After adjusting the database, you`ll have to use the database utility and activate the table.
2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
Now execute the program.
Reward if helpful.
Regards

Adding Field in standard Table control in crmd_order (standard order)

Hello All,
I want to add a Field in standard table control in Crmd_order - standard order general tab. Please Let me know it is Possible to add, if Possible Let me know how to achieve this Functionality.
Thanks,
Feroz.

hi,
If you don't want to access key...then only option is ,you have to search USER Exit or BADi (Try using BADI ME_GUI_PO_CUST) for me22n transaction......to adding the field.
Regards
Gaurav

Push button column in table control

Hi,
I have to add a few push button columns into table control. This columns has to be placed between fields of DDic table. How to do this? Shall I create new DDic structure with all the needed fields from DDic table and add also fields for push button columns? Which data element shal I use in this case for push button field? Or is the better solution to add DDic table fields one by one and then using drag and drop technique to add push button column behind it?
Thanks.

Hi ,
Your Last option is better first add columns into DDIC table then Drag and
Drop it on table control .
That will better definitely.................................
if useful rewards the point..............
Thanks .
Nilesh Jain

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

How to Enable and Disable column in Table Control.

Hi all,
I want to make certain column of Table control as Enable or Disable on Button action.
Enable means ready for input and Disable means not ready for input.
Please send me sample code.
Thanks in advance.

Hi Vipin,
    You have to loop through the table columns to set the properties in the PBO of your screen.
Here is the sample solution.
delcare a workarea for the columns in the table control in your top include.
Table Control .
CONTROLS: TAB1 TYPE TABLEVIEW USING SCREEN '0100'.
DATA: WA_COLS LIKE LINE OF TAB1-COLS.
in your screen
PROCESS BEFORE OUTPUT.
MODULE INTIALISE_100.
*&      Module 0100_INTIALISE OUTPUT
MODULE INTIALISE_100 OUTPUT.
    LOOP AT TAB1-COLS INTO WA_COLS.
      WA_COLS-SCREEN-INPUT = 1.
      MODIFY TAB1-COLS FROM WA_COLS TRANSPORTING SCREEN-INPUT.
    ENDLOOP.
ENDMODULE.                 " 0100_INTIALISE OUTPUT
modify the screen-input property as required for the table control columns.
Please provide points if helpfull.....
Thanks,
Karthik
Message was edited by: Karthik
        Karthikeyan K

How to find out the selected column in Table Control

Hi all,
      How to find out the selected column in Table Control?
Thanks & Regards,
YJR

Hi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
             WITH KEY SELECTED = 'X'.
        IF SY-SUBRC = 0.
          CLEAR: W_DUMMY, W_COL_NAME.
          SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                               W_COL_NAME.
        endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha

How to get sum of quantity column in table control

Hi, expert ,
Someone can guide me how to get som of qty column in table control ?
I created a screen with a table control and has a qty quantity field .
I want to show total of qty in a field .
my code like this ...
PROCESS AFTER INPUT.
LOOP AT I_tab.
    CHAIN.
       FIELD I_tab-COUNTQTY MODULE caculate_total_qty .
    endchain.
    MODULE UPDATE_TOTAL_QTY .
ENDLOOP.
but, when I Back to the previous screen
It's caculate again so I always get wrong Total quantity .
anyone can help me ...

Hi , Dhina
I have another question .
I use internal table data in table control to update database table .
The data in the db will be change ,
but each record I want to delete in table control , it's still exist in database .
my code is
WHEN 'SAVE'
     MODIFY YDSGBT53 FROM TABLE I_YDSGBT53 .
     COMMIT WORK .
END CASE
How to fix my code and let it can change and delete data in database ?
or
when I delete record in table control I must to delete data in the database too .
Edited by: TitusFang on Jun 16, 2011 3:21 AM

How to add radiobutton in table control

dear all
i want to add radiobutton in table control and want to select the corresponding data
& display that selected data in another screen
please guide.
Moderator Message: Please search for available information before posting.
Edited by: kishan P on Jun 3, 2011 4:08 PM

Hi,
Go through the below link.
<<link removed by moderator>>
Hope it will be useful to you.
Edited by: kishan P on Jun 3, 2011 4:07 PM

Push button in one of the columns of Table Control

Hi,
I have a requirement, where i have to display a push button in one of the columns of table control for long text. When user clicks on the control, a pop up has to be appeared in which user should be able to enter some meaning ful description and save it. please suggest me how to do this requirement.
Best Regards,
Phani Kumar. S

Hai,
You can drag n drop a button to the required column in the table control and give the required parameters like ok_code , name etc.
You can now place a text field as the heading of the column.
Now when the user clicks the the button in a row, read the corresponding line in which he has clicked.For that u can use
get cursor lines wrk_line.
now u'll get the data in that row using
Read table it_tab into wa_tab index wrk_line.
now u can call the text editor (using FM's READ_TEXT ,EDIT_TEXT and CREATE_TEXT in which the user can enter the meaningful description and save it.
When u save the text entered save it with a key part of the row that was read earlier(keep it as the text name).
So now if u need to get the description which was entered earlier u can easily read the text (using READ_TEXT ).
I hope this will be helpful for u .
Thanks
Neeraj

Disable some columns in table control?

Hi
How to disable some columns in table control.
For Ex: Table contains 8 columns.
In first row i want to disable first 4 columns.
in second row i want to disable last 4 columns.
In third row i want to disable first 2 and last 2 columns. How can we achieve this?
Cheers,
Venkys.

HI
Create three attribute in the node which is bound to the table as data source.
say pro1, pro2, and pro3 of type wdy_boolean.
now bind the enabled property of first four column editors to pro1, last 4 to pro2, and pro3 to first 2 and last 2.
then go to the eventhandler of the dropdown 's on select event and write the code to update the values of these attribute
according to the selected value.
here is the sample code.
DATA lo_nd TYPE REF TO if_wd_context_node.
    DATA lo_el TYPE REF TO if_wd_context_element.
        DATA lv_VAL LIKE ls_dealer1-name.
    lo_nd = wd_context->get_child_node( name = 'DEALER1').
lo_el = lo_nd->get_element( ).
    lo_el->get_attribute(
      EXPORTING
        name = `NAME`
      IMPORTING
        value = lv_VAL ).
     DATA PR1 TYPE WDY_BOOLEAN.
     DATA PR2 TYPE WDY_BOOLEAN.
     DATA PR3 TYPE WDY_BOOLEAN.
PR1 = ABAP_TRUE.
PR2 = ABAP_TRUE.
PR3 = ABAP_TRUE.
IF LV_VAL EQ 'A'.
PR1 = ABAP_FALSE.
PR2 = ABAP_TRUE.
PR3 = ABAP_TRUE.
   ELSEIF LV_VAL EQ 'B'.
PR1 = ABAP_TRUE.
PR2 = ABAP_FALSE.
PR3 = ABAP_TRUE.
ELSEIF LV_VAL EQ 'C'.
PR1 = ABAP_TRUE.
PR2 = ABAP_TRUE.
PR3 = ABAP_FALSE.
ENDIF.
   LO_EL->SET_ATTRIBUTE(
   NAME = 'PRO1'
   VALUE = PR1
   LO_EL->SET_ATTRIBUTE(
   NAME = 'PRO2'
   VALUE = PR2
   LO_EL->SET_ATTRIBUTE(
   NAME = 'PRO3'
   VALUE = PR3
thanks
sarbjeet singh

Hiding columns in table control

Hi Experts,
I have requirement to hide certain columns in table control. I have tried my best to use SCREEN structure with ACTIVE, INVISIBLE, INPUT, OUTPUT options, but not working properly.
The table control has nearly 10 columns with DATE as the first one. Once the screen appears after executing program, the second and third columns should be hidden and when double clicked on any date value from the basic list, the hidden columns should be visible with its values in the next level.
I am not able to hide columns in table control. By the way, suggest me options for double clicking in table control too.
Thanks.

Hi,
The value of sy-ucomm when user double clicks is /CS
To get the details of field name and value use:-
GET CURSOR FIELD g_cs_field VALUE g_cs_value.
Now you can code in PAI to display those two columns initially hidden by the user:-
CASE sy-ucomm.
WHEN '/CS'.
    IF g_cs_field = '<field1_name>'.
      LOOP AT SCREEN.
        IF screen-group1 = 'ABC'.
          screen-invisible = 0. "display control
          screen-active = 1.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    ENDIF.
ENDCASE.
Remember that in PBO of screen you have written a code to hide these same columns initially, so make sure that the code is not executed when user double clicks to display those columns.
Try this code for hidding the columns in table control initially.
MODULE status_8001.
LOOP AT SCREEN.
    IF screen-group1 = 'ABC'.
      screen-invisible = 1. "hide control
      screen-active = 0.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
ENDMODULE.
Hope this helps you.
Regards,
Tarun

Default value for a column in Table Control

Hi friends, can i set dinamcally a default value for a column in table control?, this column is check type. This default value must appear in empty rows,
thanks

ADD A MODULE AS Module yyyy In ur PAI.
as
In PAI.
LOOP at itab.
Module YYYY
ENDLOOP.
Module YYYY.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'ITAB-VAL.
      ITAB-VAL = 'XXXXXXXX'        "(DEFAULT VALUE)
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
End module.
*note
make this event work only if the previous column is filled okay.
the display will be in display mode on the screen as screen-input = 0.
see that in the table control u can get the table field for all the rows even though you are processing on some fields .
so what u do is make that particular filed masked(no i/p field and populate the field that will be better instead of populating all the columns okay.
hope this helps you out ,
regards,
vijay.

Not setting selected value in column of table control

Hi,
I have MATNR field in table control.
In PAI code is as follow.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
MODULE VALIDATE.
LOOP WITH CONTROL TC_FORMV.
FIELD /SISLEMCU/CNVADTL-MATNR SELECT *
                      FROM /SISLEMCU/CNVA01
                      WHERE WERKS = TXT_PLANT
                      AND CHARG =
                      /SISLEMCU/CNVADTL-CHARG.
                     INTO /SISLEMCU/CNVADTL.
MODULE read_table_control.
ENDLOOP.
MODULE USER_COMMAND_0500.
When i take the help in MATNR column the above query works fine but when i select the entry from help MATNR is not gets set in column in table control.
Plz help me regarding this.
Thankx in adv.
Regards,
Deepak.

When you select a value, PBO as well as PAI gets triggered. When PAI gets triggered, your query gets executed which gives sy-subrc <> 0 and due to this it might not filling the data selected..

SHDO - add column in table control in CRMD_ORDER

Similar Messages

Maybe you are looking for