Shear a group of texts issue in CS4

I can't shear a group of text using the same operation just like shear a rectangle or a group ?
Is there some odditional operations to shear a group of text ?

When I click the mouse at the corner handle of the bounding box of the text group, the cursor become a rotation cursor not a small grap trangle.
How can I distort the group of text ?

Similar Messages

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Using Adobe PhotoShop CS4, I cannot add text to a new layer. It was always a snap with previous versions of OS 10. Has anyone else noticed issues with CS4 and Lion? Many thanks in advance. Pete Hendricks

Happy to report that iTunes Match has returned to working like normal on iTunes 10.7 on my computer today. If any iTunes engineers read this thread, I really appreciate the fix.
Has it returned to normal for you?

Animating Text Issue in Ps CS4 Extended

Hi,
An issue with animating text in Ps CS4 Extended. Graphics on seperate layers animates from frame to frame without problems.
However when I add text, first off stage and on stage after a few frames, it automatically appears on every frame...
I tried to add text as a text layer or as a text imported as a jpg file and the same happens...
I just want to make text move onto the stage at certain moment.
Any ideas would be great.

From the Premiere forum...
Go to this link and scroll down to the 1st question after the troubleshooting steps... it links to software that will read the video file and give you the codec that is used... report that information, and someone who uses PS-Extended should be able to tell you if it is compatible (or, it might even be listed in the user guide) http://premierepro.wikia.com/wiki/Troubleshooting
There is also information at the wiki about converting files http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F

Is there a way to add a Hyperlink to ONE WORD in a large group of text?

I am a beginner with adobe muse but I can't seem to find a way to make one word in a group of text a hyperlink. Do I have to make a separate text box then make that a hyperlink? I did try that but upon export the one word would be in a different spot on the site. Does this make sense? Thank you for any help!

Hello,
If you're not able to make a single word a hyperlink, you must be selecting the text frame and applying the hyperlink to that. To make a single word hyperlink, click repeatedly on the text frame till you see "Text" in the selection indicator towards the top left of your screen in Muse and are able to select the particular text that you wish to hyperlink. When you have it selected apply the hyperlink to it. Check this out: http://jingsite.businesscatalyst.com/jing/2013-09-19_0023.swf
Doing this shouldn't cause the link to change position when exported, you may still want to check if there is a "Link Style" applied to the hyperlink that is causing issues.
Hope this helps.
Cheers
Parikshit

How do I set-up a group to text message?

1st time user, still learning and getting used to this new iphone 4S.
Am I able to set up and store groups to text message? I have @ 50 people to text message/email frequently and I used to do this with my old phone but I can't figure out how to do it with this one. Please help. Thank you :-)

That's unfortunate. You think with all the technology something so simple would not be an issue. I hope they can resolve that with future versions. Had I had known I never would have purchased this phone. Thanks for the info.

I send a group text, and it makes it a MMS text. how do i send a group SMS text?

when i send a group text out, my phone shows it as a MMS text, which some can't receive. how do i send out a group SMS text?

See what happens if you go into Settings>Messages and turn off Show Subject Line. Also try turning off Group Messages---you'll still be able to text multiple people at once, definitely, I think it's just that the phone just doesn't thread replies as well (I'm not sure what Group Messages does, really).
I know that turning off those two settings fixed my friend on a basic Sprint phone getting my plain text messages as MMS, though I don't know whether it's one or both that causes the issue.
EDIT: Okay, based on this article, Group Messages is like a sort of multiple person chat room, so your recipients can easily reply to all. If you need that, then you can't fix the issue (though the comments show a bunch of ways that could go wrong).
http://www.moxiemoshow.com/group-messaging-iphone/
But you don't need the fancy chat-room feature of Group Messages to send texts to multiple people, so it depends on what kinds of texts you are sending.

How to get paragraph number of selected text in ID CS4

Hi,
Can anybody help me how to get paragraph number of selected text in Indesign cs4.
Thanks,
Gopal

Ah, I see -- thanks. Turns out that there's no difference in speed between texts.itemByRange(), characters.itemByRange(),and insertionPoints.itemByRange(). In a document with 170 pages of text, and with the cursor in the last paragraph, the second and third lines, below (and your function), give exactly the same result:
t = app.selection[0];
t.parentStory.texts.itemByRange (t.parentStory.insertionPoints[0], t).paragraphs.length;
t.parentStory.characters.itemByRange (t.parentStory.characters[0], t).paragraphs.length;
Peter

Is there anyway to turn off the Group MMS texting? I want to send a mass text but don't want every person to see every other person's response. Please help!

Is there anyway to turn off the Group MMS texting? I want to send a mass text but don't want every person to see every other person's response. I am getting ready to have a baby and want to send one text out to friends and family when the baby comes BUT I don't want all of those people to receive the responses. Can I turn it off temporarily? Please help!

Settings > Messages > Group Messaging > Off

HELP....why do I keep getting "Not Delivered" errors when trying to send a Group MMS text message?

I am trying to send a Group MMS text. There are 6 recipients. I hit "send" and the progress bar goes almost to the very end, and then hangs up....and eventually I get a "Not Delivered" error message. I click on the "i" icon and it says "your message was not sent. Tap try again to send this message." I've done that time and time again, and the same thing happens. What am I doing wrong?

Try sending it as a regular text message... turn off iMessage.

Issues With CS4 Installation on Win 8?

I purchased CS4 (Web Premium) on disc several years ago, and it has been working fine on my Win XP computer ever since. The Adobe software has all the current updates, though I am using the CS4 version of Acrobat Pro (9.xx) rather than a more recent (free) version of Reader.,
Unfortunately, my computer's hard drive has fried, and I just purchased a new Windows 8 machine, which will arrive shortly. I am trying to determine:
1. Are there any general issues with CS4 installation on Win 8 that I should know about in advance?
2. Are there specific procedures (de-activation?) that I need to follow BEFORE attempting the installation on the new computer?
3. Other than specific user issues, are there problems with CS4 versus Windows 8 that I would not encounter with Windows 7.
I enhance photos and create web sites for a living, so the CS4 installation is mission-critical. I am hoping I did not make a mistake in ordering a Win 8 machine...
Thanks for any and all insights.

OK, fair enough. Maybe someone who has actually experienced this situation (CS4 --> Win 8 machine) might see this and offer some tips to avoid hassles. But I will try the install as soon as I get the new machine and post any ensuing issues/problems here.
As for de-activation of the previous installation on the XP machine, that is now impossible, as the hard-drive is fried. Unless there is a way to de-activate an installation some other way (without actually opening the programs). That said, I AM able to access files on the fried harddrive, so if there is a specific file that controls de-activation, I could access it on the old machine. However, I may not be able to actually RUN said file on that machine, but can copy it to a stick and move it elsewhere. So, any thoughts on deactivation of an installation on a deceased computer?

Multi-monitor issue with CS4?

Hi; I'm running a Mac with the following specs:
3 x 30" ACD
MacPro 2,8 Ghz Quad
2x ATI Radon 2600 XT graphics cards (2 screens attached to 1 card; 1 screen to the other card)
I've encountered after the switch from CS3 to CS4 the following issue:
Whenever I try to use the new Bridge Review function using one of the the screens sharing one graphics card I just get a grey screen.
If I move the bridge window to the solely attached screen it works.
Is that an issue of CS4 or is just the throughput of the second graCard providing 2 monitors not sufficient.
Thanks t.

T,
There are known issues with using more than one graphics card which Apple has not truly resolved. You may want to browse some of the threads in the Adobe Photoshop Macintosh forum.
In addition, you should know that Photoshop and Bridge cannot really take advantage of more than one graphic card.
http://forums.adobe.com/message/1540485#1540485
This bit of information in relation to GPU and OpenGL features and
limitations in Photoshop CS4 had totally escaped me until now. Though
it doesn't affect my setup, it might be of interest to others who may
have missed it too.
Excerpt from
http://www.adobe.com/go/kb404898
Q. Does Photoshop take advantage of dual-GPU display cards?
A. Not at this time.
Q. Why can't Photoshop take advantage of more than one display card?
A. When you move an image window between two monitors that are
each on a separate display card, the GPU attached to the second monitor
does not have access to the data necessary to accelerate drawing. The
SLI and Crossfire technologies that use more than one GPU to speed up
full-screen games will not work with Photoshop, because their use is
limited by design to accelerate only full-screen games.

How to make fields in field group as text fields in ABAP query

Hi friends,
I a have a ABAP query 85 corresponding to infoset A205,
there is a field group in the infoset A205 and it contains some fields
but some of the fields are made as text fields ................i want to know how to make these fields in
the field group as text fields.
there is a small icon " T " on the field when it is made as a text field .
Please help me
Thanks & Regards

Hi,
IF you can specify which Field Catalog then it will be useful for us to provide appropriate answer.
1. For Customer Master
IMG> Financial Accounting New> Acs Recev and Acs Payable --> Customer Accounts --> Master Data --> Preperation of creating customer master Data --> Define Account Groups with screen layout (customers)
In that you can create your own account group, and click Details Screen.
There will Field Status header within that are listed three main areas
General data
Company code data
Sales data
When you double click these lines it will take you into "Status Group" Overview. Wherein under "Select Group" are listed fields Address, communiucation.... Double click on one group , you will bet aken into the group field wherein you will find 4 colums with indicators assigned to it. ( Suppress, Req. Entry, Opt Entry, Display) you can choose the required option. "Req. Entry" against the field. Click save after you complete your selections.
2. Similarly you can do for Material Master in
IMG --> Logistics General --> Material Master --> Field Selection --> Maintain Field Selection for Data Screens
But be careful when you do it for material master as it is cuts across all the modules...
Regards
Sathya

Adding placeholder text in Photoshop CS4

Hi,
Hope this finds you well.
Does anyone know how to add placeholder text in Photoshop cs4?
I appreciate your time and look forward to hearing back from you soon.

There is no built-in function as with InDesign (Photoshop isn't a layout program, after all. If you're setting large amounts of body copy you're using the wrong tool for the job...).
Locate some placeholder text. Here's one of the many links Google returns:
http://www.lipsum.com/
Copy and paste into Photoshop.

Editing text in Dreamweaver CS4 on Mac 10.6.2 causes paragraph ends to disapear

Editing text in Dreamweaver CS4 on Mac 10.6.2 causes paragraph ends to disappear.
When adding bold in design view (strong) to two words at the start of my paragraph the last line of the paragraph disappears. This is somewhat worrying as it means any editing I do in dreamweaver could do massive amounts of damage to the content.
We are pasting the original content into the code view so as to strip the formating Dreamweaver then decides to take the last line break in the source code paragraph and then delete it see example below:
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Aenean dignissim nisi id risus varius ut scelerisque massa consectetur. Vestibulum non tortor augue, sit amet dictum lacus. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Curabitur ultrices felis et dui tincidunt sit amet tristique est pulvinar. Nulla a lectus quis erat ornare ultricies. Sed ac elementum magna. Nulla aliquet accumsan nulla. In dictum accumsan tortor eget consequat. Suspendisse potenti. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc et orci eu augue condimentum sodales quis id mauris. Nam enim nisi, convallis eu volutpat non, malesuada quis nulla. Sed auctor nulla et tellus vehicula lacinia interdum odio lobortis vehicula lacinia interdum odio.</p>
So when applying Strong with the Bold button in the design view to the first words 'Lorem ipsum' the last part of the paragraph 'lobortis vehicula lacinia interdum odio' will be deleted. Bizare and very dangerous especially for Annual Report content.
Any experience of similar or solutions would be greatly received.
PS. I have restarted, repaired permissions, checked dreamweaver is up to date trashed plist's and removed duplicate fonts.

Mac+Win=Me wrote:
It could be a problem in the templates.
In all honesty, I just tried pasting text into the Design section of a page.
It doesn't even work on my Mac, and it took three tries to get it to actually paste in VIsta.
I had to go to the code and reformat it after it did paste, but it eventually went.
I don't work with templates much.
Well, that actually makes me feel a little better, if it makes sense to feel better to learn that it could be the expensive software and not just us. I guess I will view this as an opportunity to improve me coding speed :-) Thanks for the feedback.

FICO Tables G/L account group name text

Hai
I'm developing an Report in ABAP , I would like to get the G/L account group & its text , But am not getting account group text , G/L account group field is available ( SKA1-KTOKS ) & ( T077S Pooled table , i could't find any TEXT Field ) , Please help me
Sarath P G

Hi,
Use table T077Z. Pass KTOPL & KTOKS from SKA1 as input parameters.
Regards
Vinod

Shear a group of texts issue in CS4

Similar Messages

Maybe you are looking for