SHEcess innot flowing in excise tab

DEAR EXPERTS
While doing invoice verification FOR CLEARING CUSTOMS DUTY SHEcess component is appearing ,but while
doing J1IEX to capture excise for IMPORT PO, every thing working fine but
For componets CVD ,Shecess On cvd is not flowing into Excise Tab. so in PART1 SHEcess is not capturing, please suggest,
ARABBAS

Dear,
As your CVD value is flowing in BED tab and others does not ( ADC and E Cess on CVD , SE Cess on CVD and ADC)
So just cross check Maintain excise defaults step again as explained in
http://wiki.sdn.sap.com/wiki/display/BPX/ExplanationforExciseDefaultsconfigforTAXINN
Here you will find 3 fields to be maintained CVD, ADC and E Cess on CVD (out of 4 )
Most importantly H E Cess on CVD you have to maintain as J1CV as it is hard coded in system so in your Import pricing schema name the Secondary and Higher Education Cess as J1CV
thats it and then check again

Similar Messages

Excise Tab not flowing in MIGO

Dear All,
I have created a PO with 3 line items(RM) and maintained a tax code "VT", when i checked in the PO,all the Tax values (BED,ECess,SCess and VAT) are flowing.But when i am doing MIGO, Excise tab is not appearing, i had used the same Tax code in other PO's also,but there i didn't face any issues. Kindly guide me as how to go about.
Thanks & Regards,

Hi,
Please maintain excise detail in J1id t-code.
1) Maintain material chapte id detail for material.
2) Maintain Cenvat Determination detail for material.
3) Vendor excise detail for vendor.
Regards,
Mahesh Wagh

Excise Tab is not appear in the MIGO display --- Import Process

Hi Experts ,
Excise tab is not appear in the display of the material document in Import process.
Process flow.
1. Import Po.
2. Customs clearing (MIRO)
3. Capture excise invoice against the Import Po.(Reference to MIRO document )
4.MIGO with movement type 103, in excise tab i selected only refer the excise invoice , here excise ta is coming . Lot is also generated .
after posting the material document , excise tab is not appearing against the material document .
5. post excise against the excise invoice .
Please help.
Thanks
SAP MM
Edited by: Subbas on Aug 16, 2010 11:58 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

Excise TAB is missing in MIGO

I had captured vendor excise invoice against PO in J1IEX
Later while doing GR, I had selected Refer excise invoice by drilldown.The excise value flows correctly which were captured before.
When i had posted GR & trying to see display of GR ,Excise tab is missing there.
It creates problem because while rejecting the material against that particular GR we don't understand while excise is captured against this or not...
What will be solution for it.
Process flow
J1IEX-Capture excise invoice against PO.& then MIGO
Regards,

Hi,
As per the process you have mentioned I understand that you have completed the Excise capture using J1IEX & Part 1 using MIGO where you have referred the captured excise invoice.
Now post the excise invoice using J1IEX & then check your Material document using MIGO transaction whether excise invoice getting displayed.
I hope this is the way we process an excise invoice in a 3 step method (Capture-Refer(Part 1)-Post).
Hope its clear.
Regards,

Excise tab not appearing in MIGO

Dear All,
We have some issue in MIGO.
We have imported a material against a PO and the MIRO is done for customs duty.
But at the time of doing MIGO customs duty is not capturing.
The PO is issue to cost center PO and there is no item no for the PO item.
Kindly give some suggestion for the same.
Regards,
Mullairaja

>
MullaiRaja wrote:
> Dear All,
>
> We have some issue in MIGO.
>
> We have imported a material against a PO and the MIRO is done for customs duty.
>
> But at the time of doing MIGO customs duty is not capturing.
>
> The PO is issue to cost center PO and there is no item no for the PO item.
>
> Kindly give some suggestion for the same.
>
> Regards,
> Mullairaja
While doing MIGO,enter purchase order no.,press enter,Enter correct commerical inv. no & year then
enter gr qty,tick item ok,press enter,excise tab appears. See customs duties were flowing.
Hope it solves problem.

Excise Tab not appearing in MIGO Screen but getting posted with EI Entry

Hi ,
I am excuting CIN ......While doing MIGO, Excise tab is not apearing nowhere in the MIGO screen but entries are being created successfuly in MIRO and posted as well, Entries ....
                                                       GR/IR Clearing A/c Dr
                                                       RG 23 BED A/c      Dr
                                                       RG 23 Ecess A/c Dr
                                                       RG 23 SHEcess A/c Dr
                                                       Vendor A/c Cr
Can any one help me and provide solution for this.
Thanks
Sukant

HI,
Check your excise group settings, in it check migo settings.
You need to mark tick in all boxes
EI capture
Post EI in MIGO
Duty differenc at GR
EI create/RG23D selection
Update RG1at MIGO
Also check in J1ID trax for the Po material chapter id is maintained.
Regards
KK

Base Value not changing in MIGO Excise Tab

Dear Gururs,
We are using MIGO to capture & Post Excise Invoice for our Import PO (PO type ZIMP). the problem is, when we change the qty in MIGO Qty tab, corresponding base value is not getting update in Excise tab. Please suggest a solution.

Hi,
If you are doing a MIGO for Import consignment, duties are flow from Invoice booked thru MIRO, so doutful if you can change corresponding base value in MIGO.
Regards,
Vikas

Import po jsec ,jecv,jadc is not flowing in excise capturing.

Hi guru's
i have an import po scenario.
I have done invoice verification for import po for all cvd, cess ,secc and additional custom duty.
during migo in excise tab only cvd condition is showing in bed but rest conditions are not flowing like
jsec ,jecv,jadc
1) i have correctly maintained the customs as vendor in po for all the conditions.
2) i have maintained condition in excise default (spro)as follows in tax inn
cvd=jcv1 ,ECS AP=jecv ,A/P AT1=jsce ,A/P AED=JADC
all above conditions are correctly maintained in import procedure.
even though only CVD condition flows in excise bed field
but JECV ,JSEC,JADC are not flowing in the remaining fields.
Is there any additional configuration left ?pls guide .
regards
raman patil

Dear,
As your CVD value is flowing in BED tab and others does not ( ADC and E Cess on CVD , SE Cess on CVD and ADC)
So just cross check Maintain excise defaults step again as explained in
http://wiki.sdn.sap.com/wiki/display/BPX/ExplanationforExciseDefaultsconfigforTAXINN
Here you will find 3 fields to be maintained CVD, ADC and E Cess on CVD (out of 4 )
Most importantly H E Cess on CVD you have to maintain as J1CV as it is hard coded in system so in your Import pricing schema name the Secondary and Higher Education Cess as J1CV
thats it and then check again

Re: Excise tab is not displaying in migo.

My end user has created an asset P.O. Then while executing migo excise tab is not displaying. what is the fault, & where we have to correct it. its ur.
thanks
tuljasingh.

Hi,
While doing MIGO transaction the excise tab will appear only if you mark your line item as OK in your MIGO item details.
Try to simulate MIGO by marking your item as OK then excise tab will appear & if the excise values are not flowing in the excise tab check the following
J1ID excise master
1. Plant - Material - Chapter ID combination
2. Vendor Plant Excise Details.
3. Excise Tax Rates for Chapter ID/Plant combination.
Check whether the rates are there in your PO or not?
Also check the whether you have maitained the Default excise condition types in SPRO/LG/Tax on Goods movements/India/ Basic Settings -Maintain Excise Defaults.
Regards,

STO - Excise tab not getting displayed in material document after posting.

Dear all,
We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
It is plant to plant stock transfer with excise, the process that we are following as given below:
1) STO PO - ME21N
2) Outbound delivery - VL10B - Post PGI in VL02N
3) Outgoing excise invoice - J1IIN - With the key DLFC.
4) GR - MIGO with excise invoice capture.
During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
Request to please do let us know if we have missed out on any configuration or master data.
Regards,
mahesh.

Hi,
Do the all customization setting for CIN for reference check the following link for India. and Material management
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
You have to maintain Excise master data for material,vendor and PLant in J1ID .
reward if helpful,

Excise tab is not displaying in migo

Hi,
for one material, purchase order has done. when i am going to do migo against purchase order, the excise invoice & excise items tab is not displaying.
note:- for all other materials(purchase order), excise tab is displaying.
could you please solve this problem.
thanks/regards
vish

Hi,
Check the problem with repect to the material,
Check if the Tax % is assigned properly for the combination of tht material. check J1ID,
Is in the PO the excise amount calculated? Check the condition records?
Thanks & Regards
Kiran

Excise tab is not appearing in Import of STO material-MIGO display

Hi Guru's,
Excise tab is not appearing in Import of STO material-MIGO display.
Find the Process steps below.
1)Stock transfer order using NB document type-(Company codes are different)
2)VL10B
3)VL02N-PGI
4)Customs Invoice in Indian rupees.
5)Capture excise invoice-J1IEX(Capture excise invoice w.r.t PO not STO)
6)Goods receipt with Reference excise invoice(Excise tab appearing while posting goods) MIGO
7)Post Excise invoice--Accounting entries everything is correct.
After posting the MIGO when we display Material document in MIGO, excaise tab is not appearing for this scenario only.Rest of all Excise tab appearing.
Note:In J1IEX display of excise invoice in Reference document2 field Material document should be there but not showing its empty field.
Thanks,
VR
Edited by: get_vr on Feb 10, 2010 9:08 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

Excise tab is not showing in MIGO

Here i have created the PO... with TAx code V0 where in Taxes tab it is showing the calculation....
while doing MIGO it should open the Excise Tab right for this material... it is not showing the Excise Tab... and no Accounting doc got generated..
Important thing is i have selected the Free of goods check box in PO....but after selecting the V0 it started calculated the tax all excise duties at 0.....thats wat the client want....

Hi,
If you want excise TAB at MIGO , you need to do following setting:
Select Check box of EI capture at MIGO in following path:
SPRO -- >Logistics general -- > tax on Goods Movements-- >India -- >Basic setting -- >Maintain Excise Groups
Also set entry of 101 MT for capturing Excise in following path:
SPRO -- >Logistics general -- > tax on Goods Movements-- >India -- >Business Transactions-- >Specify Which Movement Types Involve Excise Invoices
Also you need maintaion CIN master data in J1ID for material & vendor.
NOTE: When you use tax code V0, what are the tax components in V0 .......are all 0%!
Regards,
Biju K

Excise base value is not changing in MIGO excise tab for Import PO scenari

Dear Gururs,
We are using MIGO to capture & Post Excise Invoice for our Import PO (PO type ZIMP). the problem is, when we change the qty in MIGO Qty tab, corresponding base value is not getting update in Excise tab. we are not creating the planned cost mIRO directly we do the GRN.
Please suggest a solution.
Thanks
Shital

Hello Shital ,
You are using the India Scenario right?
The issue can be because you have not assigned a zero tax code to the line item. For India please make the tax code field in PO as mandatory so that the user does not save the PO without atleast a zero tax code.
Maintain the tax code & proceed. You will see the tab in MIGO.
Regards
Plauto

Excise tab is not displayed in MIGO

Dear All,
i am getting one problem,
eg:- when i received a material in MIGO with Excise Details, all are happening properly, but when i am going to see the Material Document in Display mode, that time i am not able to see Excise tab.
due to that problem, i am not able to post Excise invoice in system.
<<<Text removed>>>>>
Moderator message : Please post thread with appropriate subject.Please follow forum rules.
Edited by: Jeyakanthan A on Sep 20, 2011 12:21 PM

Hi,
You have two issues:
1. Capture excise in MIGO t.code
2.Display mode of Material Document , need to view Excise tab.
For 2nd issue you need get authorization for Display Material Document with excise details
For 1st issue follow setting:
As you needed excise to be capture in t.code:MIGO, you need to do following settings:
Select check boxes of "EI capture" & "Post EI in MIGO" in MIGO Settings segment in Maintaining Excise Group setting in following path:
SPRO --- >Logistics general - > tax on Goods Movements- >India --- >Basic setting --- >Maintain Excise Groups
NOTE: Also set "Duty different at GR" check box in case manual entry excises value in case of Dealer Invoice.
Also set entry of 101 Movement Type for capturing Excise Duties in following path:
SPRO --- >Logistics general - > tax on Goods Movements- >India - >Business Transactions->Specify Which Movement Types Involve Excise Invoices
Regards,
Biju K

SHEcess innot flowing in excise tab

Similar Messages

Maybe you are looking for