Sheets to Go Downgraded

I installed 4.5, got the Sheets to Go update and everything seemed fine. Then, I installed some other software and the Application Installer downgraded my Docs to Go and removed Sheets to Go. Now, when I go into Word to Go and select Check for Updates, it says that I am currently using the latest available update (version 1.005).
How do I get Sheets to Go back?

When you upgraded the OS, you should have deleted the DocumentsToGo.alx file, and it would not have messed with your DTG apps.
For now, you can force the upgrade, just continue on the update. If not, go to dataviz.com and have it send you a link to download the DTG apps all fresh.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

MAX error 7411 when downgrading cFP 2120

Hello,
I am running LV 8.2 for an old Industrial project that I am doing some changes to. The project is running on a cFP 2120. That cFP is running 24*7 in production.
The actual cFP 2120 I am trying to test my software on, currently has LV RT 2009 installed.
But I now need to downgrade it to LV RT 8.2.
I first tried using the MAX version (4.0.x) installed in LV 8.2, but when trying to do"Add/Remove" software, I get Error7411 as shown in link below:
http://objective.no/gostemp/max_error_7411.jpg
I then tried to install MAX from my LV2009 distribution in the LV 8.2 environment. Installed fine, but when trying to run it, it complained that it was not properly installed.
I restored my PC, and tried to install MAX 4.4.1 from a LV 8.5.1 distribution. This version of MAX works fine, but I get the same Error 7411 when I try to click the "Add/remove" software button.
So, the question is:
a) How do I clean the rt software (RT 2009) from the cFP2120 so that I can do a clean install of LV RT 8.2 onto it?
Please help, as all my searching has not given me any clue on how to do this !
Geir Ove

Hello Muks
Yes, I have seen that. Upgraded to Max that came with LV 2009, that rendered MAX useless: It complained about a "faulty installation".
Restored XP computer, and tried with MAX that came with LV 8.5.1. That version of MAX worked, but I get the same problem.
Funny that National haven't thougt of this. There should be a way of "cleaning" software off a cFP so that one could start with blank sheets and install any LVRT version onto it !
Any help from National Instrument staff?
Geir Ove

4.6 & 4.5 OS removes sheets-to-go

Folks,
has anyone gotten info from Blackberry about how 4.6 & 4.5 removes sheets-to-go? It downgrades your docs-to-go application or removes it, because the version number with sheets to go is different that what is originally installed.
This is a serious problem becuase you need to constantly reload sheets to go after every sync.
HELP!

Hi and welcome to the forums!
Just to clarify, you are talking about using Desktop Manager software ver 4.5 and 4.6 removing sheets to go?
Documents To Go is a product of DataViz which includes Word To Go and Slide Show To Go. These two come with BlackBerry OS 4.5. If you upgrade from 1.000.080 to 1.002.016 then the application you'll be able to use Sheet To Go.
Does this apply?
Message Edited by Bifocals on 08-25-2008 03:42 PM
Message Edited by Bifocals on 08-25-2008 03:42 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Printing contact sheet from iPhoto

How can I print a contact sheet from iPhoto that retains the order of photos in my album?
I've placed the photos of which I want to make a contact sheet in their own album. I've organized them according to how I'd like them to print. However, when I go to print/contact sheet/custom to set the number of images per page and hit the print button, the photos are reorganized according the the main photo folder into which the images were originally imported - that is to say, by date order.

My printer does support landscape and portrait printing. It is the latest version of iPhoto 9.5.3 that only offers a minimal choice of printer, paper size and paper type. There are no formatting options available other than "Fit, Fill, Custom, 20x25cm, 13x18cm, 10x15cm and contact sheet". Another example of Appple degrading software to make it iOS compatible!
Perhaps Apple should be reading what their customers are complaining about and do something to restore the quality of their downgraded software.

Help Needed: Returning Back to Windows 8 after downgrading to Windows 7

Hi guys, im just new here.
I have a MSI GE40 gaming laptop which I bought 2 months back.
Within those 2 months of usage, I always encounter my laptop to be very slow in shutting down. It always take, maybe up to 10 minutes to fully shut down. The screen goes black but the power button stays on orange color, & as I said, it takes a long time for the power button to be completely unlit. But for start up, its blazing fast.
Thinking that windows 8 itself is the culprit of super slow shutting down, I searched the net on how to downgrade to windows 7.
Of course I did make a back up first on a 16gb usb flash drive using the pre-installed recovery software from MSI which was completed successfully.
Then I made some tweaks on the bios (ie select legacy & disable secure boot) & boot using windows 7 installation DVD, deleted all partitions (since the notebook comes with GPT partition) to be able to install windows 7. I installed all the drivers which I downloaded from MSI website specific to my notebook.
But the problem is not solved, it is still very slow in shutting down, & now even boot up becomes very slow too.
So I downloaded & execute the firmware & bios for windows 7 from msi website (again, specific to my model). But still the same, the notebook is still very slow both in shutting down & start up.
So I decided to go back again to windows 8, I tried to boot from the flash drive (I adjusted from the bios & make the flash drive to be the first priority) but it did not boot from it. I tried F11 on start up & selected to boot from usb flash drive but again, to no avail.
So the last one I did was downloaded windows 8, make a bootable flash drive out of it, boot from it and luckily, I succeed - I have now again a windows 8 msi ge40 laptop.
But I wanted my laptop to be reinstated to factory setting, i.e, all preinstalled softwares are there, the bios is default for windows 8. So I tried to update the bios to the one for windows 8 again (since I downgraded the bios to the one for windows 7 when I downgraded the OS to windows 7). But I could not update the bios, the laptop is not booting from usb flash drive containing the bios.
I tried also to recover using F3 on start up but the system does not recognize the flash drive (with system back up). I tried also on PC settings but to no avail.
Now guys, I need your help.
How can I return back my laptop to default factory settings?
Thank you.
(sorry for my not so good English)

Hello:
I think it's not only about the OS version, you need to return this back to your shop to repair with the slow shot down issue, because the OS should be shot down in 30 seconds, far from your GE40 times.

On excel sheet upload read the workbook and populate data to sharepoint list

Requirement in my current project:
In a document library when I upload an excel sheet, a specific workbook has to be read and the contents have to be uploaded to a sharepoint custom list.
The approach followed was create an event receiver and register as a feature. Following is the code for event receiver.
public override void ItemAdded(SPItemEventProperties properties)
            base.ItemAdded(properties);
            var list = getSPList("{150301BF-D0BD-452C-90D7-2D6CD082A247}");
            SPListItem doc = properties.ListItem;
            doc["Msg"] = "items deleted from req list";
            doc.Update();
            string excelname=doc.File.Name;
            System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "calling read excel");
            string filepath = doc.File.Url.ToString();
            doc["Msg"] = "excel name" + excelname + filepath;
            doc.Update();
            readExcel(excelname,filepath);
        private static SPList getSPList(String SPListGuid)
           // SPSite Site = SPContext.Current.Site;
            SPSite Site = new SPSite("http://omistestsrv:32252/sites/OMD");
            SPWeb web = Site.OpenWeb();
            Guid listid = new Guid(SPListGuid);
            web.AllowUnsafeUpdates = true;
            SPList List = web.Lists[listid];
            return List;
        private void readExcel(string excelname,string filepath)
            try
                SPSecurity.RunWithElevatedPrivileges(delegate()
                    using (SPSite Site = new SPSite("http://omistestsrv:32252/sites/OMD"))
                        SPWeb web = Site.OpenWeb();
                        string workbookpath = web.Url + "/" + filepath;
                        web.AllowUnsafeUpdates = true;
                        var _excelApp = new Microsoft.Office.Interop.Excel.Application();
                        System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "iside read excel");
    //my code breaks or fails when cursor reaches this statement. I am not able to open the excel sheet, there is no    //problem related to the permission. same code snippet works in a console application. but when tried as an
event    //handler in sharepoint it breaks. can anyone help me to resolve the problem
                        workBook = _excelApp.Workbooks.Open(workbookpath, Type.Missing, Type.Missing, Type.Missing, Type.Missing,Type.Missing,
Type.Missing, Type.Missing, Type.Missing,Type.Missing, Type.Missing, Type.Missing, Type.Missing,Type.Missing, Type.Missing);
                        System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "after excel open");
                            int numSheets = workBook.Sheets.Count;
                            // Iterate through the sheets. They are indexed starting at 1.
                            System.Diagnostics.EventLog.WriteEntry("ExcelUpload", numSheets.ToString());
                            for (int sheetNum = 12; sheetNum < 13; sheetNum++)
                                System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "inside first for
loop");
                                Worksheet sheet = (Microsoft.Office.Interop.Excel.Worksheet)workBook.Sheets[sheetNum];
                                Microsoft.Office.Interop.Excel.Range excelRange = sheet.get_Range("A13",
"P89") as Microsoft.Office.Interop.Excel.Range;
                                object[,] valueArray = (object[,])excelRange.get_Value(
                                    Microsoft.Office.Interop.Excel.XlRangeValueDataType.xlRangeValueDefault);
                                var list = getSPList("{150301BF-D0BD-452C-90D7-2D6CD082A247}");
                                for (int L = 1; L <= excelRange.Rows.Count; L++)
                                    string stringVal = valueArray[L, 1] as string;
                                    if ((valueArray[L, 1] != null) && (!string.IsNullOrEmpty(stringVal)))
                                        System.Diagnostics.EventLog.WriteEntry("ExcelUpload",
"inside second for loop");
                                        SPListItemCollection
listItems = list.Items;
                                        SPListItem item = listItems.Add();
                                        item["Product"] = valueArray[L,
1];
                                        item["App"] = valueArray[L,
2];
                                        web.AllowUnsafeUpdates
= true;
                                        item.Update();
                            web.AllowUnsafeUpdates = false;
                            //Or Another Method with valueArray Object like "ProcessObjects(valueArray);"
                            _excelApp.Workbooks.Close();
                //workBook.Close(false, excelname, null);
                //Marshal.ReleaseComObject(workBook);
            catch (Exception e)
                System.Diagnostics.EventLog.WriteEntry("ExcelUpload", e.Message.ToString());
            finally
                System.Diagnostics.EventLog.WriteEntry("ExcelUpload", "finally block");
Is this the only approach to meet this requirement or is there any other way to crack it. sharepoint techies please help me.

as you described the scenario of the event that it should happen when user upload excel to a document library. Event Receiver is your best bet. However if you would have a requirement that users can send excel files any time to a network file location and
you want to pick it, read it and create list items etc. You would write a sharepoint timer job that would run every 10 minute to check for file and if available on the network drive, perform the operation etc. so that users who send excel file does not need
to come to the sharepoint etc. You can see that you have Event Receivcer option or Timer job option OR you would write a console application to trigger the code at a scheduled time on sharepoint server etc. so you are using the event receiver in the correct
scenario.
Moonis Tahir MVP, MCPD, MCSD.net, MCTS BizTalk 2006/SQL 2005/SharePoint Server 2007 (Dev & Config)

Vendor open items wise ALV Grid Display (FBL1N) report to Excel Sheet

Hi All,
I need vendor wise open items and cleared items in ALV Grid format in excel sheet.
I'm Trying that in T Code FBL1N, After the execution. I had select ALV Grid format like this From the menu bar->Settings-> Switch list.
After that i get ALV Grid format, Then i'm doing export the data to excel sheet. like this From the Menu bar->List->Export->Spread sheet.
That time i'm getting Error Message no. 0K064, Filter criteria, sorting, totals and subtotals are not taken into account.
I want vendor wise sorting totals and subtotals,
How can i over come this Error please let me now.
Thanks,
Amar

Hi Amar,
Please check the KBA 2083705.
https://websmp230.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3230383337303526
Regards,
Monika

BW report in BP Fact Sheet in CIC0

Hi Gurus,
We wish to display BP specific BW reports in our CIC0 fact sheet. We have configured a web template and are able to view the BW view in the CIC0 fact sheet. The issue is, that we want the BW query to run automatically based on the BP confirmed in CIC0. Currently, we get the BW view wher we open a query and then populate the BP in the selection screen and run the report. The report then shows the expected data in fact sheet. However, ideally, the BP should automatically be passed in BW query as its already confirmed in CIC0, as it does when we get information from R/3 regarding a BP.
Any help would be highly appreciated.
Cheers!
Amit

Hi guys,
I have the same problem, I need to call bw reports using the BP selected at cic0.
I tried 2 options, I can display the bw reports but the BP is not send as a parameter.
1- I created an action box in cic0 to call transaction RRMX in BW. I used BOR method, object type TSTC and method execute. This works fine to call the reports but can't find any option to send the bp as a parameter.
2 - I created a bsp version of the bw reports and created an HTML call from CIC0. But the BW report doesn't accept parameters. Also I don't know how to send the BP as a parameter, it seems that I can only send Text.
Let me know if you find another way to call bw reports from cic0.
Cheers,
Hernan.

How can i downgrade my icloud memory if i accidentally hit upgrade for $20 a year.and i want to cancel that and get my $20 back to my account?

Please help me how to cancel or downgrade the icloud memory
since i accidentally hit the upgrade button.

If you know the answers to your security questions, you should be able to change your password without using email authentication (see http://support.apple.com/kb/HE36). If you don't, you may be out of luck.

View more than one sheet at a time from the same file?

I'm trying to view two different sheets at the same time from one file. This was possible in excel by opening a "new" window. Does anyone know how to do this in numbers?
Thanks for the help,

Skigilboa wrote:
I'm trying to view two different sheets at the same time from one file. This was possible in excel by opening a "new" window. Does anyone know how to do this in numbers?
You know what: Happily, _*Numbers is definitively not a clone of Excel*_ !
It's not forced to duplicate every features of this program !
We may see every tables of a given sheet
but we can't see tables of two sheets simultaneously.
This feature is very important because it's linked to
the one which allow us to have different orientation for different sheets.
Yvan KOENIG (VALLAURIS, France) dimanche 13 septembre 2009 15:04:06

Is there a way to create a table then apply it to other sheets and have it mirror changes across all the sheets? Like a sync'ed table that will be the same on multiple sheets

I have a budget spreadsheet with a couple recurring tables. As months go by, I sometimes make changes to these tables and would like those changes to be synced across the different sheets in the spreadsheet. Is there a way to sync content across multiple pages, essentially having one true table that appears on multiple sheets?

Abdur,
In the sheet :: table :: cell that is going to receive the data, type an equals sign, then click on the cell that the data will come from and press Return.
This will require that you navigate to the origin cell by choosing the proper sheet.
Jerry

Loading the laserjet pro 200 color m251 nw one sheet at a time?

How are you supposed to load the laserjet pro 200 color m251 nw one sheet at a time?

Hi Choffman,
Thank you for visiting the HP Support Forums! To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How can I return to a previous version of Numbers? Or how can I have all my sheets show on a column on the left hand side, as in the previous version?

I updated my Numbers for Mac only to find out that there are several changes that make it less appealing for me so far (and I don't think it's only the learning curve). Questions: a) can I somehow edit the location of where I can find all the sheets (right now they are on top of the page, and you can't see all of them listed at quick glance but must scroll/arrow through them) I have in that spreadsheet? In the previous version they were all easy access on the left hand side.
Or b) can one go back to a previous version of a program somehow?
Thank you for any leads/answers!
L

can I somehow edit the location of where I can find all the sheets (right now they are on top of the page, and you can't see all of them listed at quick glance but must scroll/arrow through them)
On my machine I just hit shift-command-j (the keyboard shortcut I assigned in System Preferences) and a list of the sheets in the current document pops up:
I type a number from the list and jump immediately to that sheet. The hands never have to leave the keyboard.
(This particular document had a sheet named for each month. But the sheets in your document automatically will be listed instead.)
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
Installation will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
Note, also, that in Numbers 3 you don't have to use those left-right arrows upper right to slowly scroll left-right to the sheets that are out of view. Just move your cursor up to the "band" with the "tabs" and drag left or right. That's much faster than using the arrows.
SG

ORA-600 [17069] error while running catrelod.sql to downgrade 11g database

Hi,
We are downgrading our 11.2.0.2 database to 10.2.0.4. We have successfullly run catdwgrd.sql without any errors in 11g env. While running catrelod.sql in 10g env we are facing the following error:
SQL> @?/rdbms/admin/catrelod.sql
TIMESTAMP
COMP_TIMESTAMP RELOD__BGN 2013-04-24 20:15:39 2456407 72939
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database server version is not 10.0.0.
DOC> Shutdown ABORT and use a different script or a different server.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database has not been opened for MIGRATE.
DOC>
DOC> Perform a "SHUTDOWN ABORT" and
DOC> restart using MIGRATE.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
Session altered.
Session altered.
no rows selected
DECLARE
ERROR at line 1:
ORA-00600: internal error code, arguments: [17069], [0x170FB8CA8], [], [], [],
[], [], []I have checked the trace file in udump but it dint give any readable information.
Please find below environment details.
OS : RHEL 5 64 bit
11g Database : 11.2.0.2
10g Database : 10.2.0.4
Kindly assist.

KR10822864 wrote:
Whenever an ORA-600 error is raised a trace file is generated and an entry written to the alert.log with details of the trace file location. Starting with Oracle Database 11g Release 1, the diagnosability infrastructure was introduced which places the trace and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-600 is created. For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file contains vital information about what led to the error condition
please post 40 lines of alert log info .
MOS Note:ORA-600 [17069] "Failed to pin a library cache object after 50 attempts" [ID 39616.1]
"Look in the trace file for the text 'LIBRARY OBJECT HANDLE: handle=170fb8ca8'"
if not found any massages like above please raise [email protected].
Hi KR,
Thanks for your help. As suggested I have checked the trace file to search and found the below info. I suppose it is some kind of lock but not sure about it. Please let me know if the following makes sense:
    SO: 0x21158a6e0, type: 3, owner: 0x211006f28, flag: INIT/-/-/0x00
    (call) sess: cur 211572570, rec 211572570, usr 211572570; depth: 0
      SO: 0x21158a9b8, type: 3, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (call) sess: cur 211572570, rec 0, usr 211572570; depth: 1
        SO: 0x1727a2618, type: 54, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT PIN: pin=1727a2618 handle=170fb8ca8 mode=S lock=171243e98
        user=211572570 session=211572570 count=1 mask=001d savepoint=0x43 flags=[00]
        SO: 0x171243e98, type: 53, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT LOCK: lock=171243e98 handle=170fb8ca8 mode=S
        call pin=0x1727a2618 session pin=(nil) hpc=0000 hlc=0000
        htl=0x171243f18[0x17278a310,0x17278a310] htb=0x17278a310 ssga=0x172789928
        user=211572570 session=211572570 count=1 flags=PNC/[0400] savepoint=0x43
        LIBRARY OBJECT HANDLE: handle=170fb8ca8 mtx=0x170fb8dd8(0) cdp=0
        name=SYS.STANDARD
        hash=51570e225ed8a9a803b7318f191e0a8d timestamp=04-18-2006 00:00:00
        namespace=TABL flags=KGHP/TIM/SML/[02000000]
        kkkk-dddd-llll=0000-001d-001d lock=S pin=S latch#=3 hpc=0004 hlc=0004
        lwt=0x170fb8d50[0x170fb8d50,0x170fb8d50] ltm=0x170fb8d60[0x170fb8d60,0x170fb8d60]
        pwt=0x170fb8d18[0x170fb8d18,0x170fb8d18] ptm=0x170fb8d28[0x170fb8d28,0x170fb8d28]
        ref=0x170fb8d80[0x170fb8d80,0x170fb8d80] lnd=0x170fb8d98[0x170f05b50,0x170fa6858]
          LIBRARY OBJECT: object=170e82de8
          type=PCKG flags=EXS/LOC[0005] pflags=NST/IVR[0201] status=VALD load=0
          DATA BLOCKS:
          data#     heap pointer    status pins change whr
              0 170e831f8 170e82fc0 I/P/A/-/-    0 NONE   00
      SO: 0x21158e470, type: 5, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (enqueue) CU-70E88BC0-00000001    DID: 0001-001F-00000004
      lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res_flag: 0x2
      res: 0x17677adc8, mode: X, lock_flag: 0x0
      own: 0x211572570, sess: 0x211572570, proc: 0x211006f28, prv: 0x17677add8
      SO: 0x177f82c28, type: 59, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      cursor enqueue
      child: 170e89348, flag: 53, number: 0
      parent: 170e89738

Error while opening the report or sheet in the desktop

While opening the reports it gives error as " Failed to Connect Database".
In Some reports it gives error as "Unable to Load EUL item".
Then we check the Menu bar, Tool ----> Options --->EUL.
We found, it is giving Default EUL as blank.
Now it is not allowed to open any sheet as well as not allowed to create new report.
Can any one tell how to resolve this problem?

Hi,
I am having the same issue. I am not able to import Crystal Report.
the error is "No matching records found 'Queries' (OUQR) (ODBC -2028) [Message 131-183]"
I have previewed the report using Preview external crystal report option and is running perfect.
please guide ASAP.
Regards
Sonil

Sheets to Go Downgraded

Similar Messages

Maybe you are looking for