Shelf life view not coming in material master

Hi,
I have one issue, we want to create some material with shelf life as per presernt setting in OMT3E it is as below
01     *     *     *     T1
01     *     HAWA     M     21     Std ind.(short) tab pages
01     *     HERS     *     T1
01     *     LEER     *     BE     Std Ind Tabs for Empties
03     *     *     *     23     Std retail: tab pages
03     *     COUP     *     R1     Retail Coupons
03     *     PLAN     *     R2     Retail Articles (Planned)
i have check in the transaction for the first screen sequence T1 is not present in our system but in OMT3E i am not getting any error msg. then i hva echeck for screen sequence 21 in this the shelf life fields are there in the OMT3 transaction , but when i am creating material master I am not getting shelf life fields in material master I have also check in MM01 debugging in the field it is T1 in the field V_T133S-REIHF-BILDS, but this screen sequence is not present in OMT3 so in which screen sequence i have to do the required modfication so that the shelf life field will come in the material master.
regards,
zafar
Edited by: zafar karnalkar on Jul 4, 2011 2:06 PM

Are you in a ERP system or in a industry solution?
is it a standard material type like ROH and FERT, or a customized own material type?
I have rarely been im OMT3, which I usally need to do when adding own subscreens with Z.fields.
You are talking about standard SAP fields, so the screen sequence should not really be the place to check.
I think it is pure customizing of field selection.
What is your material type?, what is its industry, what is the transaction you use for maintenance?

Similar Messages

PO for Material not exixting in material master

Hi all,
I am creating a po for a material that is not exixting in material master.
I have taken document type NB, Given vendor no, Entered Material No, acc assigment as "X All Aux.acct.assgts".
Material Description, Quantity, Price, Currency, Plant, Material Group, GL Account. and saved the PO.
I done GR and When i am Saving system is Shooting an error "Account Determination for Entry 1200 WRX not possible"
Is the procedure done by me is Correct What is the acc assigment key to be taken.
Is it necessary to maintain a Material Group for this type of Material?
Any settings to be done in transaction event key?
Need to define any Vacluation class for this type of materials?
Regards,

Dear,
This type of error is display at that time when you valuation class is not map with any G/L in OBYC for particullar transaction key.
So go in bellow direction.
Enter T-code OBYC.
Select WRX Transaction Key, Double click on it.
Enter your chart of accout.
Enter your valution class which is display in your error - 1200 than enter your G/L.
Than click on save button.
If it is useful for u, Please revert back.
Regards,
Mahesh Wagh

Profit Center is not taken from Material Master

Dear all,
When we post material-related items from SD or MM with link to material/plant (as additional account assginment) then Profit Center is taken from Material Master. But when I manually (FB01 or even FBR2) post similar item with link to material/plant (as additional account assginment) then Profit Center is not taken from Material Master.
Why this happen? How to fix it? We need to derive Profit Centers from Material Master for items that have links to material and posted via FI.

>
Jigar Thakkar wrote:
> Hi,
>
> It will also take effect in FI, as we have defined the same. Status will be 3 (Other transactions + cross-company (orders + billing doc.) for Subsitution in T code 0KEL
>
> Regards,
> Jigar
Just checked this. It's not worked. This subst. not even called (I've checked w/ active Trace).
So, the question is still open. How to derive PCtr from material in manual FI (FB01, FBR2) transactions.

VK11 Material Description Does Not Came from Material Master

Hi Gurus,
Good day. Please kindly help advice where does the material description in VK11 came from as it displays a different description not equal to material master.
Thank you in advance.
Regards,
Rellie

Dear Rellie,
It should show the same as mentioned in MM01. Plz check again d MM03 as description for a matieral wil always b picked from Mat. Master only across SAP.
If still ny specific issue then share otherwise plz close d thread.
regards

View's in the Material Master

Hello,
With regards to the material master data:
(a) are there more views to a material that are dependent on the plant except for: 'costing', 'Forecasting', 'MRP', 'Production Resources/Tools', 'Purchasing',' Quality Management' and 'Sales'?
(b) why are they dependent at the plant?
(c) why does the basic data depends on the plant?

Hi Shadmi!
Here is d answers,
a) are there more views to a material that are dependent on the plant except for: 'costing', 'Forecasting', 'MRP', 'Production Resources/Tools', 'Purchasing',' Quality Management' and 'Sales'?
        --- Except Basic Data1 and Basic Data2 all other views are plant dependent.
(b) why are they dependent at the plant?
        --- Because these datas may vary plant by plant. For example cost of material may change from plant to plant since it depends upon in which price the vendor is supplying to you.
(c) Why does the basic data depends on the plant?
       --- Not at all. Basic data view is specific to company code level.
Cheers,
Yuvi.

Flag Unlimited Overdelivery not purpose from material master for po with as

Dear.
I have a material with flag unlimited overdelivery filled in the material master purchasing view.
When I convert a pr to a u201Cnormalu201D purchase order (without account assignment) the system rightly purposed this flag.
When I convert a purchase requisition with project account assignment category (category Q) in the po the system donu2019t set this flag.
Do you know the reason of this behavior ?
Thanks in advance.

Do you reference a contract in case of the project purchases?
then check the contract if different tolerances are setup there.
maybe it is caused by a program bug that is fixed with OSS Note 1644491 - unlimited overdelivery flag is cleared with price change

Valuation Class not appearing in Material Master (Finished Goods)

Hi Friends,
I am facing problem with Valuation Class not appearing while creation of Material Master especially in Finished Products
when i give the Valuation class it showing the message like below
*Valuation class IBM2 not allowed for material type Finished product*
*Message no. M3180*
*Diagnosis*
*The combination of values you have entered is not defined in the system.*
*Procedure*
*Check your entries, and choose a valid value or combination of values with F4.*
*If you want the value(s) to be defined in the system, contact your systems administrator.*
and When i press F4 in Valuation Class area it is not appearing
Can any one give me the solution
Regards,
Ram

Hi Ram,
Go to Transaction Code OMSK. You will find three tabs there.
Go to the second tab i.e, valuation class, note the account category reference assigned to the valuation class "IBM2".
Come out of that screen and access the third tab ie., Material Type/Account Category reference.
Check whether Account category reference related to the valuation class "IBM2" is assigned to ther material type "Finished product" or not.
If not, assign the same. It should work.
Warm regards,
Murukan Arunachalam

Production order variances not updating in material master

We have activated Material ledger-
Price determination selected-2(transaction based)
Finished goods standard price--832.50
Price control in material master-S (Standard Price)
Variances per kg: 265.50 is shown in Moving Price field in Material master-
Why it is not adding to standard Price-
How to add 265.50 per kg(variance) and increase the Finished goods valuation (in the balance sheet)
Thanks in advance
Joseph David

Hi,
After activating ML, if you maintain FG Material Price Control-S with Price Determination-2, the shown Moving Average price is ONLY FOR STATISTICAL/reporting PURPOSE, The goods movements and Material Inventory valuation will not be updated/valuated with Moving Average Price, it will still be done as per Standard Price only. If you want to get the full advantage of ML activated realistic/actual valuation of your inventory and goods movements, you need to change the Material Price Determination to u201C03u201D. Then as per SAP standard ML process, preliminary valuation for the material will be u201CStandard Priceu201D and all Price differences will be accumulated in ML categories and after period/month-end activities, the goods movements and inventory will be evaluated with u201CPeriodic Unit Priceu201D i.e., averaging by taking into consideration all Material Price differences.
Regards
appalas

Document is not capured from material master to PO

Hi Gurus
I created a material in the material master. In the additional data, i have attached the PDF drawing of the material and i have save it.
Say Material Shaft was created.
Then i created Purchase order for the material Shaft. In PO i am not able to get the PDF which i stored in material master.I need to send the drawing along with the PO.
What i have to do ?
- Pithan
Edited by: Pithan Pithan on Feb 5, 2009 5:02 PM

hi Pramod
Thank you for your reply
For material X , i have created a Document in CV01N and released it. in the object link - material master, i have attached the X material.
when i am creating a PO (ME21N), i gave a material 'X'. selecting the PO item and clicking documents icon below that, i didn't find any document, but when i manually enter the document, it is attached..
I need to know, the document is attached to the material master, when creating the PO, it has to pick the document...
I am asking why its not picking it... ?
- Pithan

Material Ledger not activated in Material Master--Urgent

Dear Gurus,
We have created Material Master of Project Material With tag "Do NOT Cost" but Material ledger not get activated. although In plant material Ledger is activated .
Can any body Help to find out solution
Regrds
Mahesh
*Assign full marks

>
Kishore Kumar Chiluka wrote:
> Hi
>
> Please get in touch with your BASIS consulatant , as the updates are not performing rightly, this seems to be asystem error.
>
> Thanks & Regards
>
> Kishore
Thanks a lot Kishore.
But unfortunately we don't have any Basis Guy separately. I was doubling up as Basis as well APO in my org . I'm pretty new to all these stuff. I searched in help.sap.com about this a lot, but couldn't find anything useful.
Can you help me in identifying a solution to this problem?
Thanks,
Rajesh Manoharan

HERKL (country of origin) not updated during material master upload

Hi all,
I have a problem in material master update, when iam doing material master update.......i have uploaded more than 18000 records,
where few ariund 800 records are not updated with HERKL( Country Of Origin).......
Could you please help on the above query.
Regards
Jagadeeshwar B
Moderator message: subject corrected, please use a more descriptive one next time.
Edited by: Thomas Zloch on Aug 20, 2010 11:36 AM

Have you analyzed what is common to the errors?
is it the countries that are used in this cases?
or is it a certain material type?
do you have any succesfull update with a country that is among the failed ?
Have you tried manually to enter this field in MM02 for such a material?
we can only guess, maybe a typo in the country code, maybe county does not have an Iso code, maybe the field in hidden in create transaction for this material type.....

Header data not coming from vendor master when creating SA using BAPI

Hello,
I am creating SA using BAPI_SA_CREATE. I am passing the vendor code and other header related data in the header table of the BAPI.
SA is created successfully with all the data that is passed to the BAPI. Now if the payment term and inco terms data is passed initial to BAPI then this data is not taken from vendor master. This data appears blank in SA.
Shouldn't this data be picked up from vendor master as they are maintained properly in vendor master?
I just need confirmation whether BAPI picks or not from vendor master if the data (payment term and inco terms) passed is initial.
Thanks and Regards,
Saba

Hi,
Are u passing X to corresponding fields of HEADER structure what ever you have populated in HEADER structure .

PuP price not changed in Material master

Hello All experts
I have one question about the material ledger related transaciton, I have a Material with 2+V (price deter. and price control) setting in Material master data in Accounting 1 TAB. And material ledger is active for this material, the Periodic Unit price is 1 USD in current period and stock is 0.
One PO posted for this Material for purchase with actual price 100 USD, and 101 movement type with special stock indicator E was used in Goods receipt posting. I think these stock will be treated as valuated sales order stock. But GR posting didn't trigger any PuP price change in Material master. Is that situation normal? Pls kindly help.

With price control V in activity-based material price determination (indicator2 in the material master), the moving average price is calculated. With price control S, the material is valuated with the standard price and the moving average price is calculated for information purposes.
In single-/multi-level material price determination(indicator 3 in the material master), the valuation price (standard price) remains unchanged and a periodic unit price is calculated for the closed period.
This option is only for materials with price control indicator S,and is only recommended if in addition to multiple currencies and/or valuations, you use single-/multi-level material price determination.
In single-/multi-level material price determination, a periodic unit price is updated for information, but it can only be used for material valuation in the closed period.

Design View Not Showing Up In Master On Plan View Page

Five days ago I downloaded a trial version of Muse and tried building Katies-cafe. Everything went OK except that the Design view is not showing up in the Master. Any Ideas? I disabled and re-enabled the thumbnail checkmarkin Plan view, and I also tried reseting the page properties in Design View, but it still doesn't work.

Hi smartserpent,
Can you post a screenshot of what you are seeing?
Thanks,
Preran

Plan view not showing changes to Master.

Design changes made to Master not being reflecting in Plan View. However each individual pags does reflect change when in design mode. Can I force an update to Plan View?

Hello,
Changes made to the master page should show up in the plan mode on all the pages that the master has been applied to. Please check if the master has been applied to all the pages correctly by checking the name of the master here: http://jingsite.businesscatalyst.com/jing/2013-03-22_0250.png
If the master is applied correctly, then please show us the difference by showing screenshots of how the master page looks and how the plan mode looks. You can attach the screenshots as images here as well, or can upload it and then provide links to them.
Cheers
Parikshit.

Shelf life view not coming in material master

Similar Messages

Maybe you are looking for