Shell and CDE question

Hello,
I am new to Solaris and Unix coming from the MS world. I understand the
differences of the 3 different shells (sh,csh,ksh) but what is the purpose of having 3
different ones? Couldn't the features be combined into just one shell?
Also, in the CDE, what is the difference in opening a "Terminal Console" window or
opening a "This Host" window? Is there something that one window does that the
other doesen't?
Thanks in advance

Hi
Each shell has evolved over the years and has it's own different
eatures especially with respect to programming with them. There are also several other shells like jsh,bash,tcsh etc. available that have their own features. It depends on what you find the most comfortable
to use.After all, having more choice is better than having none !!
Regarding your second question, the "Terminal COnsole" and "Terminal"
in CDE both spawn new shells in seperate windows. But the console logs
all system errors and messages generated by the various unix rocesses
so that the system administrator can identify them and take the
corrective action. Apart from this there is no difference between the two.
HTH
Shridhar

Similar Messages

What are strengths and weaknesses of the sap.m.Shell and sap.m.App as container for an application wrapper?

My question today: What are strengths and weaknesses of the
sap.m.Shell
and
sap.m.App
as container for an application wrapper?
I currently use non of them, but I see the advantages.
SAP best practise is to use one of them or nest them as shell > app. What are strengths and weaknesses of the approaches?

We prefer to say, the tender mercies of the Fetch block.
You'll notice the "wfm info" cluster as an output of the Fetch
VI. This cluster has gain and offset members- use these to scale
your binary data to floating point voltage representation.
As you point out, the numbers won't be exactly what you expect given
the vertical range and the device resolution. There are a few
reasons for this. First, we don't use the absolute full scale of
the ADC for the maximum input voltage. There are a couple of
codes of headroom at the top and bottom. This allows your input
signal to slightly exceed the specified vertical range without clipping
(you'll get a warning from the driver). Second, these gain and
offset numbers take into account calibration information for your
device. Using these numbers will correct for small deviations
from the ideal offset and gain.
So if you use the gain and offset numbers from the driver, your
measurements will be more accurate than if you assume 0 offset and
perfect gain. They will be most accurate if you make sure to
perform a self-calibration once the device is in your system and at the
temperature that your tests will be run.

How to configure a shell and tube heat exchanger with Lab VIew to get data

HiI
In our undergraduate chemical engineering labboratory we want to configure our shell and tube heat exchanger with a DAq and Lab VIEW to get information about the temperaure (of the cold fluid stream being heated), the pressure (of the steam on the shell side of the heat exchanger) and the flowrate (of the water being heated).
Can anyone suggest thermocouples, pressure transducers and flowmeters to fit between the heat exchanger and the DAq?
P.S. the heat exchanger is already fitted with thermometers, a pressure gauge and a rotameter but we don't know how to connect these hardware to the DAq
Solved!
Go to Solution.

It sounds like you have enough information to pick out appropriate sensors, you just need to do the research. I would start looking through the Omega catalog, or give them a call - they're usually helpful. I can't take the time to spec out parts for you - that would be a lot of time spent on someone else's project. Most pressure sensors put out either a 4-20mA or 0-5V signal, either of which you can read through an analog input on a DAQ; measuring a 4-20mA signal requires a resistor to convert to voltage. Most of the NI DAQ boards can read a thermocouple on an analog input, but make sure that your hardware does support reading thermocouples. For accurate readings, use a device that has built-in cold junction compensation - for example, the SCB-68 connector block - and for the most accurate readings, get a board specifically designed for temperature measurement.
For the flow measurement, a standard, simple solution is an orifice plate. You put a differential pressure transducer across it, look up the appropriate equations, and use them to calculate the flow rate given the density of the fluid (which you'll be able to calculate from the pressure and temperature, since steam tables are widely available). There are other differential pressure devices available as well - at a previous job we used a V-Cone from McCrometer. If you call them they'll spec one for you - but get an approximate cost first to make sure it's within your budget.

Account with an icon of a face and a question mark

Same issue of other user in Yosemite Apple Support.
Following advises on that thread I also installed the ETRECHECK software tool, report is as follows:
Problem description:
At the login screen I find an icon with a face and a question mark in it - with a message it needs an update.
EtreCheck version: 2.1.5 (108)
Report generated 02 gennaio 2015 12:37:26 CET
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:22:54
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.89 GB (467.03 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Login Items: ℹ️
iTunesHelper Applicazione (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox ApplicazioneHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Pin It Button [Installed]
Save to Pocket [Installed]
Add To Amazon Wish List [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      14% WindowServer
      3% hidd
      2% Safari
      1% Dock
      0% fontd
Top Processes by Memory: ℹ️
333 MB com.apple.WebKit.WebContent
155 MB mds_stores
137 MB Safari
137 MB Finder
86 MB Dropbox
Virtual Memory Information: ℹ️
7.76 GB Free RAM
4.88 GB Active RAM
3.28 GB Inactive RAM
1.26 GB Wired RAM
4.73 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 2, 2015, 11:15:06 AM Self test - passed
Jan 2, 2015, 12:06:57 AM /Library/Logs/DiagnosticReports/Dropbox109_2015-01-02-000657_[redacted].cpu_res ource.diag [Details]
---------- is there any troubleshooting for delete that fake account every time I start my Macbook Pro?
thanks and regards
Edoardo

Smiley face with a ? means a bootable system is not found.
There maybe a problem with either system software or hard drive itself.
Try this.
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Best.

Performance issue and functional question regarding updates on tables

A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table. Here is what I would have expected to see as the code. Assume that both sets of code have a parameter called p_werks which is the plant in question.
data : commit_count type i.
select matnr zfield from mara into (wa_marc-matnr, wa_marc-zfield).
update marc set zfield = wa_marc-zfield
     where werks = p_werks and matnr = wa_matnr.
commit work and wait.
endselect.
I would have committed every 200 rows instead of every one row, but here's the actual code and my question isn't around the commits but something else. In this case an internal table was built with two elements - MATNR and WERKS - could have done that above too, but that's not my question.
            DO.
              " Lock the record that needs to be update with material creation date
              CALL FUNCTION 'ENQUEUE_EMMARCS'
                EXPORTING
                  mode_marc      = 'S'
                  mandt          = sy-mandt
                  matnr          = wa_marc-matnr
                  werks          = wa_marc-werks
                EXCEPTIONS
                  foreign_lock   = 1
                  system_failure = 2
                  OTHERS         = 3.
              IF sy-subrc <> 0.
                " Wait, if the records not able to perform as lock
                CALL FUNCTION 'RZL_SLEEP'.
              ELSE.
                EXIT.
              ENDIF.
            ENDDO.
            " Update the record in the table MARC with material creation date
            UPDATE marc SET zzdate = wa_mara-zzdate
                       WHERE matnr = wa_mara-matnr AND
                             werks = wa_marc-werks.    " IN s_werks.
            IF sy-subrc EQ 0.
              " Save record in the database table MARC
              CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                EXPORTING
                  wait   = 'X'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'S'.
              " text-010 - 'Material creation date has updated'.
              wa_log-message = text-010.
              wa_log-zzdate = wa_mara-zzdate.
              APPEND wa_log TO tb_log.
              CLEAR: wa_return,wa_log.
            ELSE.
              " Roll back the record(un save), if there is any issue occurs
              CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'E'.
              " 'Material creation date does not updated'.
              wa_log-message = text-011.
              wa_log-zzdate = wa_mara-zzdate..
              APPEND wa_log TO tb_log.
              CLEAR: wa_return, wa_log.
            ENDIF.
            " Unlock the record from data base
            CALL FUNCTION 'DEQUEUE_EMMARCS'
              EXPORTING
                mode_marc = 'S'
                mandt     = sy-mandt
                matnr     = wa_marc-matnr
                werks     = wa_marc-werks.
          ENDIF.
Here's the question - why did this person enqueue and dequeue explicit locks like this ? They claimed it was to prevent issues - what issues ??? Is there something special about updating tables that we don't know about ? We've actually seen it where the system runs out of these ENQUEUE locks.
Before you all go off the deep end and ask why not just do the update, keep in mind that you don't want to update a million + rows and then do a commit either - that locks up the entire table!

The ENQUEUE lock insure that another program called by another user will not update the data at the same time, so preventing database coherence to be lost. In fact, another user on a SAP correct transaction, has read the record and locked it, so when it will be updated your modifications will be lost, also you could override modifications made by another user in another luw.
You cannot use a COMMIT WORK in a SELECT - ENDSELECT, because COMMIT WORK will close each and every opened database cursor, so your first idea would dump after the first update. (so the internal table is mandatory)
Go through some documentation like [Updates in the R/3 System (BC-CST-UP)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTUP/BCCSTUP_PT.pdf]
Regards

How can i restore my iphone 5s as i forgot my icloud password and sec questions

I bought a new iphone 5s (32G Gold)
and when I connect it to itunes asked me to restore from my old iphone 4
with all my account settings and passwords.
but I have a problem with my account for icloud password and security questions because my cloude id is *************** and with no problem with my apple id "*****************", I tried to restore my new iphone after I turned off find my iphone from icloud setting and when its restore was finished the iphone is locked and asked me to unlock the iphone with a ****************** that I forget the password and security questions and when I tried to enter my account id "**************** with no problem with its password it says to me "this account can't unlock this iphone"
when I visit tradeline (Apple products dealer) I found no answer and they adviced me to contact apple directly.
Name : Alaa Rashed Abd el Hafiz
Country : egypt
<Personal Information Edited by Host>

First, remove your personal information from your post. That's not needed here. This is a public forum, and it is unwise to provide your personal data online.
Second, here's how you reset your password and/or security questions.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

I have purchased music with my old apple id, old computer and old email. My old email and computer are not available anymore and I dont remember my password and securtiy question anymore. How can I authorise my old apple id to authorise the new computer?

Hi, I have a new computer and new apple id. I've purchased music with my old computer, email and apple id.
I cant access now the previously purchase music, because it wants to authorize the new computer to play the
music. I cant remember password and security questions for my old id and the old email doest exist anymore.
What can I do?

Hi, Carmen.
Thank you for visiting Apple Support Communities.
If you need to reset you security questions, do not know the answers and no longer have access to that email account, see the last sentence under Note in step 5.
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need tocontact iTunes Store support in order to do so.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Cheers,
Jason H.

Spam filtering solution for iPhone and a question.

I've read a lot of posts about spam filtering for the iPhone and have yet another solution and a question. I use SpamSieve and I am not affiliated with them in any way. The nice thing about SpamSieve is that if it is the first rule in your Mail.app rule set any mail that follows has already been filtered. All you need to do then is create another rule that redirects email to what ever mail account you choose. Since my ISP allows multiple accounts, I will simply create an iPhone@myISP account.
Now the question. Is it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
Thanks

Is it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
not at present time

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?
Solved!
Go to Solution.

Chuck72352,
Hello! It is my understanding that you need to add the individual files to the Source Code Control along with the .lvproj file.
Here is a great deal of information on Source Code Control Practices in LabVIEW.
Ben Sisney
FlexRIO V&V Engineer
National Instruments

HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup.

Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94816)

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

I want to integrate SMS gateway to Cisco ISE 1.2 and my question is
SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor

I'm not sure I understand the question. Do you want to log in to the Sponsor Portal using AD credentials?
Create an Identity Source Sequence using AD as an Authentication Source. Go to Administration > Identity Management > Identity Source Sequences. Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings. Double-click Sponsor from the Left Menu and click Authentication Source. Choose the Identity Source Sequence. Click Save.
I hope this helps.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

How to invoke BASH shell and execute a command in that shell in Windows 98

Hello, I have a problem and if somebody will help me, I will be very glad. Thank you.
I am using BASH shell on Windows 98 OS by means of CYGWIN. And I want to invoke this BASH shell and execute a preprogrammed command in the shell (./scan fileName.txt) from a JAVA program. But so far, I am not sucessful. I can not read or write anything from / to BASH shell. It either blocks and freezes (When I use waitFor( ) ) or appears and disappears without executing scan command (When I do not use waitFor( ) ). My code is like this:
// This method is used for compiling a file.
// It invokes BASH shell and executes "./scan fileName.txt" command
public void compileFileMethod () {
try {
Process proc = ( Runtime.getRuntime() ).exec ("C:\\MyDocuments\\CYGWIN.BAT); //I also tried to add -c ./scan fileName.txt after .BAT );
// I also tried to write "C:\\MyDocuments\\BASH.EXE" but it did not help
OutputStream ostr = proc.getOutputStream();
BufferedWriter bw = new BufferedWriter ( new OutputStreamWriter (ostr) );
InputStream istr = proc.getInputStream();
BufferedReader br = new BufferedReader ( new InputStreamReader (istr) );
InputStream errorStr = proc.getErrorStream();
BufferedReader errorBr = new BufferedReader ( new InputStreamReader (errorStr) );
bw.write("scan case40.10.txt"); /* I am trying to input the scan command to the shell,but it is not working*/
bw.flush();
Vector list = new Vector (1) ;
String str;
while ( (str = br.readLine() ) != null) {
list.addElement(str);
} // End of while
Enumeration enumForList = list.elements();
while ( enumForList.hasMoreElements() ) {
String tempString;
tempString = ( String ) enumForList.nextElement();
System.out.println(tempString); // I am trying to read the outputs of the scan command but it is not reading (I can not see any output)
I tried with and without waitFor( ), it did not work
// wait for command to terminate
proc.waitFor();
// close streams
br.close();
bw.close();
errorBr.close();
} // End of try
catch ( IOException ioe ) {
JOptionPane.showMessageDialog (null, "Input / output error occured while compiling file ", "Error", JOptionPane.ERROR_MESSAGE);
} // End of catch
catch ( SecurityException se ) {
JOptionPane.showMessageDialog (null, "Security error occured while compiling file ", "Error", JOptionPane.ERROR_MESSAGE);
catch ( InterruptedException ie ) {
JOptionPane.showMessageDialog (null, "Interruption error occured while compiling file ", "Error", JOptionPane.ERROR_MESSAGE);
} // End of method compileFileMethod
// Thank you for your helps and time.

You cannot invoke BAT files directly, you have to invoke the program that run those files which is your Windows 98 shell. For example (under windows 2000), i would invoke "cmd.exe sricpt.bat some args", rather than "script.bar some args".
Hope this will help you out.

SBO Ebook: Certification and Interview Questions and Answers

Hi, please permit me to use this forum to introduce you to this ebook titled: [SAP BUSINESS ONE SOLUTION CONSULTANT CERTIFICATION REVIEW AND INTERVIEW: QUESTIONS, ANSWERS AND EXPLANATIONS|http://www.ebookmall.com/ebook/277772-ebook.htm]
This book consists of real life and scenario based review questions and answers on SAP Business One solution certification examinations with Booking Codes/Certification ID: C_TB1200_04, C_TB1200_05 and C_TB1200_07. It covers the SAP Business One Solution Consultant curriculum namely:
 TB 1000 - SAP Business One Logistics
 TB 1100 - SAP Business One Accounting
 TB 1200 - SAP Business One Implementation and Support
The book is targeted at:
 SAP Business One Consultants preparing for the Solution certification exams (C_TB1200_04, C_TB1200_05 and C_TB1200_07)
 SAP Business One Solution Consultant Job Seekers
 SAP Business One Solution Consultant recruiters
 SAP Business One Implementation team
 SAP Business One Project Managers
In this book, you will find:
 SAP Business One Solution Consultant Certification Areas of Concentration (AoC)
 SAP Business One Solution Consultant Certification Curriculum
 Things you must know about the SAP Business One Solution Consultant Certification Examination.
 SAP Business One Certification review questions and detailed answers
 SAP Business One Interview questions and detailed answers
It can be downloaded at http://www.ebookmall.com/ebook/277772-ebook.htm.

Hi Dan,
Thanks for your observation, comment and review.
1. As a matter of fact, since many features of SAP B1 has not changed, just as you asserted, I took cognizance of new enhancements to the solution over the various releases, especially as it relates to the functionalities. By extension however, most questions for prior releases applies to the successor release.
Furthermore, there was a mix-up in the download. Ideally, you should have three sections in the book. Section I (release 2004, by extension - 2005 and 2007 releases); Section II (release 2005, by extension - 2007 release) and Section III (release 2007). The document has been reviewed. Hence, everyone that bought the book before 29th of April 2008 should visit my [blog|http://blogs.ittoolbox.com/sap/kehinde/archives/sap-business-one-solution-consultant-ebook-review-notice-24053] on how to get a copy of the revised version within 24 hours at no extra cost. I regret any inconveniences. PLEASE DO NOT LEAVE YOUR EMAIL ADDRESS ON THIS FORUM.
2. On localization, SAP Business One has more than 10,000 installations across the world. The book is not intended to be "localization specific". It is intended to serve as a certification review for functionalities that cuts across board with a mix of localized functionalities. I am sure you found in there a number of localization questions for other countries like UK. My advice for individuals using the book is to identify which questions apply to their localization.
While I await your review of the [revised version|http://www.ebookmall.com/ebook/277772-ebook.htm] as an SAP Business One advisor, I believe you will agree with me that it is an invaluable resource for preparing for the certification exam and also technical interview sessions.
Thanks

Flash Security Settings and Random Questions not Displaying

Hey folks,
I created a Captivate 4 project with 3 slides and a question pool of about 70 questions in which I am randomly pulling in. I am using IE7 and Flash 10. Publishing in Flash 10. If I publish or view in Preview in a web browser the project launches, plays the first 3 slides, and then goes blank when the first question should appear. Note: previewing the project AND publishing the project as an .exe does launch and display all the questions correctly. It ends up being a flash security issue. I went to the adobe site and via the Adobe Flash Player Security Manager" I entered in the main .SWF captivate-generated file as a trusted file and then re-ran the published captivate project and it ran correctly. Question is ... what do I need to do to set up flash or my project so I don't have to do this for every new project that I deploy? I don't want to have the users have to go in and add whatever I deploy as a trusted file. It's also a little confusing as to why the first three slides played and it stopped at the questions ... seems like if it's not a trusted file, that it wouldn't run at all.
Thanks for any help!
Chris

Hello again
I think I'd be investigating a temporary web server to host on until things are ready. Here's where it will help.
By providing files to the end users, if you are copying files over you end up having to explain how to save the files. You then have to walk them through setting the Flash Security so they can properly view. It all just becomes a pain in the kazoo.
If you can find some server space, you simply upload the content and provide a link for the users to view the content.
Other than that, if you are insistent that copying is the way to fly, I might suggest you establish a known location where you want everyone to copy their files. Perhaps C:\TestFolder. Then provide some instruction on how to configure the folder with the relaxed Flash Security. From there forward, anything they copy to the folder should need no security adjustment.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Shell and CDE question

Similar Messages

Maybe you are looking for