Shell script not working

Hi
All,
I have oracle 9i and 10g on unix. now i have 920.env and 1020.en file to set p respective enviornment.
when I excecute this commnad
. $HOME/920.env from the shell prompt it is working fine. and also same for 1020.env .
Now same command . $HOME/920.env i am putting in shell script and trying to execute that script but it is not executing.
i don't know what to do.
Thank you
vishal

now as i understand that statement is executing but it's scope is only with in the script. when it complete it's execution all varialble reset to it's by defualt .profile so that statement in the script set variable with in the scope of the script only.
Thanks for your help
Vishal

Similar Messages

Hardcode password in a do shell script not working

I have been trying to solve something i have wanted to do for a long time, that is get a script that changes the ammount of time before the display goes to sleep. I tried GUi scripting but in system preferences the changes made to the slider did not stay. So i have now come onto a do shell script. Found below. I would prefer to just hardcode my password into it however this does not seem to work. Any ideas ?
set exitflag to false
try
repeat until exitflag is true
set {text returned:Sleeptime, button returned:sleepstate} to (display dialog "Minutes before display sleep" & return & "Between 1 and 180 mintues" & return & "Greater than 180 means never sleep" default answer "1" buttons {"Cancel", "OK"} default button 2)
set Sleeptime to Sleeptime as number
if Sleeptime is less than 1 then
set exitflag to false
else if Sleeptime is greater than 180 then
set Sleeptime to 0
set exitflag to true
else
set exitflag to true
end if
end repeat
end try
set Sleeptime1 to Sleeptime as string
set Sleeptime1 to quoted form of Sleeptime1
set psswd to quoted form of "XXXXX"
do shell script "sudo pmset -a displaysleep " & Sleeptime1 password psswd
set pete to do shell script "sudo pmset -g"
set xx to text -2 thru -1 of pete
if xx - Sleeptime = 0 then
tell application "SEC Helper"
show screen message "Worked:" & return & xx & " mintues"
end tell
else
tell application "SEC Helper"
show screen message "Failed!"
end tell
end if

1) don't use 'sudo' in a 'do shell script'. It isn't necessary and will sometimes break.
2) do not use 'sudo' in a 'do shell script'
3) do not use... I'm sure you get the idea.
It is not necessary to use 'sudo' in a 'do shell script' command. 'do shell script' itself takes care of the authentication element when you use 'with administrator privileges'. Therefore the appropriate way of doing this is:
<pre class=command>do shell script "pmset -g displaysleep " & sleeptime1 with administrator privileges password psswd</pre>
If you omit the 'password psswd' element the user will be prompted to authenticate using the standard system authentication dialog.
The problem you're running into is that the 'password' parameter is only valid when you use 'with adminitrator privileges', and is therefore getting ignored in your current script.

My cold backup shell script not working

I have written a shell script for cold backup but. It says that line 42 has unexpected syntex error '{' and line 57 unexpected end of file. Please help
BKUP_DIR=/u03/backups/abu/nightly_backup
LOG_FILE=/u03/backups/abu/backup.log
ORACLE_HOME= /u01/app/oracle/product/10.2; export ORACLE_HOME
ORACLE_SID=SEED; export ORACLE_SID
PATH="$PATH:$ORACLE_HOME/bin";export PATH
# Execute the backup procedure
echo ymd=`date +%Y%m%d` >> $LOG_FILE
echo "Database BACKUP starting." >> $LOG_FILE
ORACLE_HOME=/u01/app/oracle/product/10.2; export ORACLE_HOME
ORACLE_SID=SEED; export ORACLE_SID
PATH="$PATH:$ORACLE_HOME/bin";export PATH
rman target=/ << EOF
shutdown immediate
EOF
if [ $? -eq 0 ]
then
mkdir -p ${BKUP_DIR} # make directory
echo "Database shut down.">> $LOG_FILE
else echo "not shutdown".>> $LOG_FILE
fi
if [ ! -d ${BKUP_DIR} ]
then
echo "Not a directory: ${BKUP_DIR}">> $LOG_FILE
exit 1
fi
echo "Previous Backup is being removed." >> $LOG_FILE
rm ${BKUP_DIR}/${ymd-${seed}.gz >>$LOG_FILE
echo "Cold backup being performed." >> $LOG_FILE
cp /u01/app/oracle/admin/SEED/* ${BKUP_DIR}/$ymd-${cmsv}.gz #copying database files into new dir
cp /u02/oradata/SEED/* ${BKUP_DIR}/$ymd-${cmsv}.gz
cp /u03/oradata/SEED/* ${BKUP_DIR}/$ymd-${cmsv}.gz
echo "Cold backup of archive logs being performed." >> $LOG_FILE
mv /u01/app/oracle/product/10.2/dbs/arch/* ${BKUP_DIR}/$ymd-${cmsv}.gz
gzip ${BKUP_DIR}/$ymd-${cmsv}
echo "Restarting Database" >> $LOG_FILE
rman target=/ << EOF
startup
EOF
else
echo "Database will NOT start up." >> $LOG_FILE
fi
echo 'ymd='date +%Y%m%d' >> $LOG_FILE
echo "Database BACKUP has completed." >> $LOG_FILE
exit

I trying to write that script for our new production database. My script will create a folder automatically and will copy all database files into the folder. Now my script dont copy the files into the direcory that automatically create. I want my directory name with timestamp that i already speciy in my code. The scripts now generate an error that now such files or directory. I mean when it tries to copy files from source to destination folder. Please give me some suggestions.
if [ $? -eq 0 ]
then
mkdir -p ${BKUP_DIR} # make directory
echo "Database shut down.">> $LOG_FILE
else echo "not shutdown".>> $LOG_FILE
fi
if [ ! -d ${BKUP_DIR} ]
then
echo "Not a directory: ${BKUP_DIR}">> $LOG_FILE
exit 1
fi
echo "Previous Backup is being removed." >> $LOG_FILE
rm ${BKUP_DIR}/${ymd-${seed}.gz >>$LOG_FILE
echo "Cold backup being performed." >> $LOG_FILE
cp /u01/app/oracle/admin/SEED/* ${BKUP_DIR}/$ymd-${cmsv}.gz #copying database files into new dir
cp /u02/oradata/SEED/* ${BKUP_DIR}/$ymd-${cmsv}.gz
cp /u03/oradata/SEED/* ${BKUP_DIR}/$ymd-${cmsv}.gzecho "Cold backup of archive logs being performed." >> $LOG_FILE

Process Flow - User Defined object calling Unix Shell script not working

Hi, I have a User Defined Object in a Process Flow with the following parameters :-
Command: /usr/bin/ksh
Parameter List:
Result Code:
Script: cd /shell_scripts
./dwh_get_datafile.sh param1 param2 param3
Success Threshold: 0
The script executes but it does not correctly interpret all the Unix commands within it e.g command such as FTP, DATE, GREP etc.
In the job details I can see :-
./dwh_get_datafile.sh: date: not found
./dwh_get_datafile.sh: ftp: not found
./dwh_get_datafile.sh: grep: not found
./dwh_get_datafile.sh: rm: not found
./dwh_get_datafile.sh: ls: not found
./dwh_get_datafile.sh: awk: not found
Anyone know what I have done wrong ?
The script runs fine when run as a Unix script while logged into Telnet.
Thanks.
Paul

The shell script is executed by the oracle user in the unix environment so make sure that the directorie where you can find the unix commands exists in the path for the oracle user in .profile as you can se in my example below.
PATH=$PATH:$ORACLE_HOME/bin:$OWBHOME/bin:/ASW/ora_script:/local/bstat:/usr/bin:/opt/bin:/usr/local/bin; export PATH
/JZ

Connect internal in shell script not working

Oracle: 11.2.0.1 in AIX env
I export ORACLE_SID and then try to connect internal but I get connected to idle instance. What am I missing???
this block is in a .sh script
export ORACLE_SID=ufms203
$ORACLE_HOME/bin/sqlplus /nolog <<EOF
connect / as sysdba
WHENEVER SQLERROR EXIT;
select instance_name from v$instance;
OUTPUT *********************
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 29 09:43:05 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> SQL> select instance_name from v
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
Disconnected

The instance is started:
k801ora@jd1su143 in /a0143/d01/scripts : ps -ef | grep ufms203
k801ora 8794340 1 0 12:32:46 - 0:00 oracleufms203 (LOCAL=NO)
k801ora 8929434 1 0 09:33:52 - 0:00 ora_w001_ufms203
k801ora 10248348 1 0 Mar 22 - 2:24 ora_pmon_ufms203
k801ora 10359024 1 0 Mar 22 - 0:15 ora_gen0_ufms203
k801ora 10379478 1 0 Mar 22 - 7:50 ora_vktm_ufms203
k801ora 10399748 1 0 Mar 22 - 0:40 ora_dbw0_ufms203
k801ora 10408158 1 0 Mar 22 - 1:19 ora_psp0_ufms203
k801ora 10420478 1 0 Mar 22 - 0:16 ora_mman_ufms203
k801ora 10428426 1 0 Mar 22 - 0:16 ora_diag_ufms203
k801ora 10436840 1 0 Mar 22 - 0:17 ora_dbrm_ufms203
k801ora 10440938 1 0 Mar 22 - 12:00 ora_dia0_ufms203
k801ora 10445048 1 0 Mar 22 - 2:51 ora_ckpt_ufms203
k801ora 10449134 1 0 Mar 22 - 0:38 ora_dbw1_ufms203
k801ora 10453232 1 0 Mar 22 - 0:35 ora_dbw2_ufms203
k801ora 10457330 1 0 Mar 22 - 0:35 ora_dbw3_ufms203
k801ora 10461428 1 0 Mar 22 - 0:47 ora_lgwr_ufms203
k801ora 10465530 1 0 Mar 22 - 0:04 ora_reco_ufms203
k801ora 10469624 1 0 Mar 22 - 0:55 ora_smon_ufms203
k801ora 10473726 1 0 Mar 22 - 4:42 ora_mmnl_ufms203
k801ora 10477820 1 0 Mar 22 - 2:43 ora_mmon_ufms203
k801ora 10485770 1 0 Mar 22 - 0:08 ora_q002_ufms203
k801ora 10489864 1 0 Mar 22 - 0:07 ora_qmnc_ufms203
k801ora 10506270 1 0 Mar 22 - 0:04 ora_q000_ufms203
k801ora 10530842 1 0 Mar 22 - 0:04 ora_q001_ufms203
k801ora 10588214 1 0 Mar 22 - 0:19 ora_smco_ufms203
k801ora 11124888 10510484 2 09:54:04 pts/0 0:00 grep ufms203
k801ora 11796592 1 0 09:35:19 - 0:00 ora_w000_ufms203
k801ora 12431386 1 0 09:53:53 - 0:00 ora_w002_ufms203
k801ora 12484794 1 0 12:32:41 - 0:11 oracleufms203 (LOCAL=NO)
k801ora 16023576 1 0 12:32:04 - 1:12 oracleufms203 (LOCAL=NO)
k801ora 16629976 1 0 09:25:21 - 0:00 ora_w005_ufms203

Modify shell script to work with other folders

i am trying to modify a shell script that sorts files in a course folder into sub folders by month. I have a shell script that works, but when i try to modify it for another course folder it quits working. can someone let me know what i am doing wrong?
the working shell script:
do shell script "
for f in \"$HOME/Desktop/DWI Annual Report/\"*
do if [ ! -d \"$f\" ]; then
x=\"${f%%.*}\"
i=$((${#x}-3))
if [ -d \"$HOME/Desktop/DWI monthly/${f:$i:3}\" ]; then
mv \"$f\" \"$HOME/Desktop/DWI monthly/${f:$i:3}\"
fi
fi
done"
the nonworking modified script:
do shell script "
for f in \"$HOME/Desktop/DOEP Annual Report/\"*
do
    if [ ! -d \"$f\" ]; then
        x=\"${f%%.*}\"
        i=$((${#x}-3))
        if [ -d \"$HOME/Desktop/DOEP monthly/${f:$i:3}\" ]; then
            mv \"$f\" \"$HOME/Desktop/DOEP monthly/${f:$i:3}\"
        fi
    fi
done"

ok here is the applescript that works.
property total_student : 1
tell application "Finder"
set master_path to alias "Users:macbook:Desktop:DWI Annual Report:Annual Report.xlsx"
set filesWithDWI to get every file of folder ((path to desktop folder) & "DWI Annual Report" as string) whose name contains "DWI"
repeat with f in filesWithDWI
my transfer_data(f, master_path)
end repeat
end tell
on transfer_data(child_path, master_path)
tell application "Microsoft Excel"
set child_book to (open workbook workbook file name (child_path as string))
set child_doc to worksheet 1 of child_book
set master to worksheet "sheet 1" of (open workbook workbook file name (master_path as string))
set num to 15 --All lists start at index 12 or later, I'm putting 10 to be safe
set students to {}
tell child_doc --grab values from child document
repeat until (value of cell (("A" & num) as string)) is 1
set num to num + 1
end repeat
repeat until (value of cell (("B" & num) as string)) is ""
set end of students to {namevalue of cell (("B" & num) as string)), driver_idvalue of cell (("C" & num) as string)), DOBvalue of cell (("D" & num) as string)), Ref_Recvalue of cell (("I" & num) as string)), pre_testvalue of cell (("J" & num) as string)), post_testvalue of cell (("K" & num) as string)), cert_idvalue of cell (("L" & num) as string))}
set num to num + 1
end repeat
set startdate to range "C7"
set classlocation to range "C11"
set instructor to range "H7"
end tell
tell master
set num to 7
log (value of cell (("B" & num) as string))
repeat until (value of cell (("B" & num) as string)) is ""
set num to num + 1
end repeat
repeat with student in students
set value of cell (("A" & num) as string) to total_student
set value of cell (("B" & num) as string) to name of student
set value of cell (("C" & num) as string) to driver_id of student
set value of cell (("D" & num) as string) to DOB of student
set value of cell (("H" & num) as string) to pre_test of student
set value of cell (("I" & num) as string) to post_test of student
set value of cell (("J" & num) as string) to cert_id of student
set value of cell (("f" & num) as string) to startdate
set value of cell (("E" & num) as string) to classlocation
set value of cell (("G" & num) as string) to instructor
set value of cell (("K" & num) as string) to Ref_Rec of student
set num to num + 1
set total_student to total_student + 1
end repeat
end tell
save child_book
close child_book
save active workbook in master_path
close active workbook
end tell
end transfer_data
do shell script "
for f in \"$HOME/Desktop/DWI Annual Report/\"*
do
    if [ ! -d \"$f\" ]; then
        x=\"${f%%.*}\"
        i=$((${#x}-3))
        if [ -d \"$HOME/Desktop/DWI monthly/${f:$i:3}\" ]; then
            mv \"$f\" \"$HOME/Desktop/DWI monthly/${f:$i:3}\"
        fi
    fi
done"
It takes the class rosters and copies the information from the class roster to the annual report and then moves the file to the monthly folder and files it in the appropriate months folder based on the last three letters of the file name.

Powershell unzip with shell.application not working when launched from windows service

I have a deployment agent on a machine implemented as a windows service. Service is 32-bit and runs on windows server 2008R2 x64 SP1 with powershell V2. Powershell script requires elevation and to run under x64 because of dependency to powershell module
'IIS Administration'. To achieve this, the service starts a cmd file which in turn launches powershell x64 console:
C:\WINDOWS\sysnative\WindowsPowerShell\v1.0\powershell.exe "Start-Process C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell -ArgumentList '-ExecutionPolicy Bypass -NoLogo -NonInteractive -NoProfile -File C:\Temp\EndJobCmd\Install.ps1' -Verb RunAs"
This seems to work well. The problem I have is that the script has a sequence where it unpacks a zip file to a destination folder using shell.application, this works fine when triggered manually on the server or through the task scheduler, but when triggered
from the service it does not extract any files at all (cannot see any errors thrown by the script but it seems to continue to execute as it logs a successful message to the event log after finishing).
Unzip sequence looks like:
$shell = New-Object -com shell.application
$pkg = $shell.namespace($sourceFile)
$installDir = $shell.namespace($targetDir)
$installDir.Copyhere($pkg.items(), 20)
Any advice greatly appreciated. I have searched some and seen a few people with similar issue but have yet to find a solution.

If it's still actual, I managed to fix this with having CopyHere params equal 1564.
So in my case extract zip function looks like:
function Expand-ZIPFile{
param(
$file, $destination
$shell = new-object -com shell.application
$zip = $shell.NameSpace($file)
foreach($item in $zip.items())
$shell.Namespace($destination).copyhere($item,1564)
"$($item.path) extracted"
1564 description can be found here - http://msdn.microsoft.com/en-us/library/windows/desktop/bb787866(v=vs.85).aspx:
(4) Do not display a progress dialog box.
(8) Give the file being operated on a new name in a move, copy, or rename operation if a file with the target name already exists.
(16) Respond with "Yes to All" for any dialog box that is displayed.
(512) Do not confirm the creation of a new directory if the operation requires one to be created.
(1024) Do not display a user interface if an error occurs.

Shell Script not getting invoked in File adapter

Hi all,
Requirement:
PI need to pick the file from source directory and send it to target directory using SFTP.
I'm using SCP command for this purpose.
When I run the shell script (with simple SCP command) from command prompt, script is working fine.
Same script is called from PI File adapter but script is not getting invoked.
In the communication channel logs, "Executed OS command" is available. There are no Error/Warning messages in the log.
NFS transport protocol is used in the File communication channel.
Complete directory path of the shell script is mentioned in File channel -> Run Operating System command after message processing.
Even the following simple command is not working from PI receiver file channel:
echo "Test file" >> /data/test.txt
Please let me know if I'm missing out something.
Thanks,
Geetha

Hi Geetha,
I think the syntax u are using is not correct. Please follow the below syntax:
/path/<script_name> %F
for ex: /staging/Interface/XI/Script/FTPData %F
use the above in the communication channel.
%F should be after a space.
FTPData is the script name
/staging/Interface/XI/Script/ is the location where the script is present
Cheers,
Souvik
Edited by: Souvik Chatterjee on Apr 14, 2011 3:38 PM

Sunstudio startup script not working

The environment is Ubuntu Linux 5.04 with Java 1.5.0_01 installed.
The awk script that checks the Java Version has some problems on this distribution.
Enabled set -x in the sunstudio shell script, here are the relevant lines:
+++ '[' -x /shares/free/opt/jdk1.5.0_01/bin/java ']'
+++ /shares/free/opt/jdk1.5.0_01/bin/java -version
+++ /usr/bin/awk -f /opt/sun/sunstudio10u1/prod/scripts/ver.awk
awk: run time error: regular expression compile failed (missing operand)
"| |(|)|,|
FILENAME="" FNR=0 NR=0
++ ver=
+++ /opt/sun/sunstudio10u1/prod/scripts/jdk_compare 1.3.9 ''
++ gettext -e 'Warning: Ignoring JDK_HOME. Sun Studio does not run with this\nversion of the J2SE.\n'
+++ '[' -x /shares/free/opt/jdk1.5.0_01/bin/java ']'
+++ /usr/bin/awk -f /opt/sun/sunstudio10u1/prod/scripts/ver.awk
+++ /shares/free/opt/jdk1.5.0_01/bin/java -version
awk: run time error: regular expression compile failed (missing operand)
"| |(|)|,|
FILENAME="" FNR=0 NR=0
++ ver=
+++ /opt/sun/sunstudio10u1/prod/scripts/jdk_compare 1.3.9 ''
++ for d in '"${JDKLIST[@]}"'
++ '[' -x /usr/j2se/bin/java -a -x /usr/j2se/bin/javac ']'The rest of the utilities seem to work correctly, netbeans starts up correctly.

The awk script was written and tested on various
platforms, both
Linux and Solaris. I'm not familiar with Ubuntu Linux
and thats not
one of the platforms we tested on.=====
www.ubuntulinux.org
Could you do several things for me?
First, could you do some sanity testing on
/usr/bin/awk. Just
enough to make sure its working in other uses. If it
does, can
you see if its a symlink to gawk? If so, what version
of gawk
(you can do "awk --version" if it is). On the Linux
platform I have
(SuSE Linux Enterprise System 9), I get "GNU Awk
3.1.3". If you
can send me the exact version of awk, I might be able
to come
up with an alternative.=====
The installed awk was a symlink to mawk.
I installed also the GNU awk and that fixed it.
You might also be able to fix this. Do you have write
permissions
on your sunstudio install? If you look at the ver.awk
script it has
a comment giving an alternate value of the FS which
is easier
to read, but doesn't work on Solaris (where
/usr/bin/awk isn't
GNU awk). Since we have to work with both GNU and
Solaris
awk, I didn't use this alternate. But if that works
on your system
its a simple way of getting you going.
Of course, you're still not on a supported Linux
platform, so there
are still no guarantees you won't run into other
problems. These
would most likely be in some of the native
executables the IDE
uses (such as dbx and dmake). The core parts of the
IDE (all
Java parts), should work fine on most any Linux
platform.=====
Encountered the problem with dbx dependency to libc:
$ dbx
dbx: /lib/tls/i686/cmov/libc.so.6: version `GLIBC_2.3.4' not found (required by dbx)
$ ldd -v /lib/tls/i686/cmov/libc.so.6
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x80000000)
Version information:
/lib/tls/i686/cmov/libc.so.6:
ld-linux.so.2 (GLIBC_2.3) => /lib/ld-linux.so.2
ld-linux.so.2 (GLIBC_2.1) => /lib/ld-linux.so.2
ld-linux.so.2 (GLIBC_2.0) => /lib/ld-linux.so.2
ld-linux.so.2 (GLIBC_PRIVATE) => /lib/ld-linux.so.2
$ ldd /opt/sun/sunstudio10u1/bin/dbx
/opt/sun/sunstudio10u1/bin/dbx: /lib/tls/i686/cmov/libc.so.6: version `GLIBC_2.3.4' not found (required by /opt/sun/sunstudio10u1/bin/dbx)
libdl.so.2 => /lib/tls/i686/cmov/libdl.so.2 (0xb7fce000)
libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0xb7f14000)
libm.so.6 => /lib/tls/i686/cmov/libm.so.6 (0xb7ef3000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb7ee7000)
libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0xb7dba000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0xb7feb000)
Was there a reason why this version of GNU libc was chosen as minimal requirementl!?

UDM and shell scripts and working with the ENVIRONMENT variable options

In Userdefined metrics you have the ability to pass envronment variables.
I was going to send
DIR=/db/db05/oradata/ORCL/hot
How to handle whats passed to the shell script?
It passes $1 as {DIR=/db/db05/oradata/ORCL/hot}
yes with the brackets. Here I figured it would simply set the DIR environment variable.
Any cool tricks to work with this mess?
Is it meant for perl scripts instead?
Daryl.

Ilmari Aalto wrote:
Hi Darth,
Thanks for your hint! Nevertheless I think it's something more profound, since there's no error etc. For example, should I have the path wrong I assume that OWB would return me some kind of an error when it doesn't find the .sh-file? Isn't there any log-file to see whether the command was executed? It seems like the execution of the User Defined element would be skipped altogether.
Cheers,
IlmariNo, if you don't give an absolute path OWB will not return any error, it just wont do anything at all...

Script not working anymore(SOLVED)

I made a basic script and it was working fine for a few hours.I went to work,got back and it stopped working.
I created a folder in my ~/bin directory and used export PATH=$PATH:~/bin,also i gave the script execution privileges
with chmod 755 pac so I'm not sure where i went wrong .The only thing that comes to mind is that i didn't use chmod u=x pac.
Btw I used echo $PATH and my ~/bin directory was there.As soon as i use the export command again it works
Last edited by unilx (2011-03-05 17:40:18)

I'm still a noob at this but i think it's shell scripting,here is my script:
I use pac to execute this one
1 #!/bin/bash -
2 #===============================================================================
3 #
4 # FILE: pow.sh
5 #
6 # USAGE: ./pow.sh
7 #
8 # DESCRIPTION: A script to execute powerpill and do a system,refresh,refresh,update.
9 #
10 # OPTIONS: ---
11 # REQUIREMENTS: ---
12 # BUGS: ---
13 # NOTES: ---
14 # AUTHOR:
15 # COMPANY:
16 # CREATED: 03/04/2011 04:20:50 AM AST
17 # REVISION: 1.0
18 #===============================================================================
19
20 set -o nounset # Treat unset variables as an error
21
22 clear
23
24 echo "Hello unilx"
25
26 date
27
28 sudo pacman-color -Syyu
29
30 echo "System update complete"
31
32 clear
33
34 exit
and pow for this one
1 #!/bin/bash -
2 #===============================================================================
3 #
4 # FILE: pow.sh
5 #
6 # USAGE: ./pow.sh
7 #
8 # DESCRIPTION: A script to execute powerpill and do a system,refresh,refresh,update.
9 #
10 # OPTIONS: ---
11 # REQUIREMENTS: ---
12 # BUGS: ---
13 # NOTES: ---
14 # AUTHOR:
15 # COMPANY:
16 # CREATED: 03/04/2011 04:20:50 AM AST
17 # REVISION: 1.0
18 #===============================================================================
19
20 set -o nounset # Treat unset variables as an error
21
22 clear
23
24 echo "Hello unilx"
25
26 date
27
28 sudo powerpill -Syyu
29
30 echo "System update complete"
31
32 clear
33
34 exit
and this was the error:
bash: pac: command not found
the same with pow
I know both files say pow.sh.It was a mistake that i just noticed now.I used vim pow.sh to start the syntax and renamed it to pow with :w pow
Last edited by unilx (2011-03-04 20:06:59)

Desktop picture making script not working under 10.6

I have a script that starts the TeamViewer application on my server and then makes pictures of the running application and sends them per email to me so I can see it is running on my server.
Under 10.5 it worked always (still does), under 10.6 it does not. Any ideas as to why?
Here is the script:
set dFolder to "~/Desktop/"
do shell script ("mkdir -p " & dFolder)
repeat 2 times -- Repeat XX times.
activate application "TeamViewer"
delay 1
set tTime to do shell script "date +%H-%M-%S"
do shell script ("/usr/sbin/screencapture " & dFolder & tTime & ".png") -- Capture screen.
delay 5 --
end repeat
thanks

And after you've started screen sharing, you could just take a screenshot:
property N : 0
set N to N + 1
set picPath to ((POSIX path of (path to desktop)) & "Picture_" & N & ".png") as string
do shell script "screencapture -tjpg " & quoted form of picPath
Code taken from TUAW.

Script not working in SharePoint content editor webpart

Hi All,
<html>
<head>
<script type="text/javascript" src="https://www.google.com/jsapi"></script>
<script language="javascript" type="text/javascript">
$(document).ready(function () {
//Call your function here like
//retrieveListItems();
ExecuteOrDelayUntilScriptLoaded(retrieveListItems, "SP.js");
var siteUrl = '/vceo/PMO/EPMO/';
var close1 = ''; var close2 = ''; var high = ''; var low = ''; var medium = ''; var lowMedium = ''; var mediumHigh = '';
var open1 = ''; var open2 = ''; var high1 = ''; var low1 = ''; var medium1 = ''; var lowMedium1 = ''; var mediumHigh1 = '';
var count = 0; var count1 = 0;
var initiate = 0; var planning = 0; var execution = 0; var closing = 0;
var sumMinimal = 0; var sumModerate = 0; var sumCritical = 0; var sumSevere = 0;
var sumHighlyLikely = 0; var sumLikely = 0; var sumSomewhat = 0; var sumUnlikely = 0;
var sumBudget = 0; var sumCommitted = 0; var sumConsumption = 0;
function retrieveListItems() {
alert("Welcome to Dashboard");
var clientContext = new SP.ClientContext(siteUrl); alert("site url");
var oList = clientContext.get_web().get_lists().getByTitle('Project Issues and Risks');
var oList1 = clientContext.get_web().get_lists().getByTitle('Project');
var oList2 = clientContext.get_web().get_lists().getByTitle('Risk Impact');
var oList3 = clientContext.get_web().get_lists().getByTitle('Risk Probability'); alert("get by title");
var camlQuery = new SP.CamlQuery(); var camlQuery1 = new SP.CamlQuery(); var camlQuery2 = new SP.CamlQuery(); var camlQuery3 = new SP.CamlQuery(); var camlQuery4 = new SP.CamlQuery(); var camlQuery5 = new SP.CamlQuery(); var camlQuery6 = new SP.CamlQuery();
camlQuery.set_viewXml('<View><Query><Where><Eq><FieldRef Name="Project_x0020_Issue_x0020_Status" /><Value Type="Choice">Issue</Value></Eq></Where></Query></View>');
camlQuery1.set_viewXml('<View><Query><Where><Eq><FieldRef Name="Project_x0020_Issue_x0020_Status" /><Value Type="Choice">Risk</Value></Eq></Where></Query></View>');
camlQuery2.set_viewXml('<View><Query><Where><Eq><FieldRef Name="Overall_x0020_Status" /><Value Type="Choice">Open</Value></Eq></Where></Query></View>');
camlQuery3.set_viewXml('<View><Query><Where><Eq><FieldRef Name="Overall_x0020_Status" /><Value Type="Choice">Closed</Value></Eq></Where></Query></View>');
camlQuery4.set_viewXml('<View><Query><Where><IsNotNull><FieldRef Name="Project_x0020_Code" /></IsNotNull></Where></Query></View>');
camlQuery5.set_viewXml('<View><Query><Where><IsNotNull><FieldRef Name="Project_x0020_Code" /></IsNotNull></Where></Query></View>');
camlQuery6.set_viewXml('<View><Query><Where><IsNotNull><FieldRef Name="Project_x0020_Code" /></IsNotNull></Where></Query></View>');
this.collListItem = oList.getItems(camlQuery); this.collListItem1 = oList.getItems(camlQuery1); this.collListItem2 = oList1.getItems(camlQuery2); this.collListItem3 = oList1.getItems(camlQuery3);
this.collListItem4 = oList2.getItems(camlQuery4); this.collListItem5 = oList3.getItems(camlQuery5); this.collListItem6 = oList1.getItems(camlQuery6);
clientContext.load(collListItem); clientContext.load(collListItem1); clientContext.load(collListItem2); clientContext.load(collListItem3); clientContext.load(collListItem4); clientContext.load(collListItem5); clientContext.load(collListItem6);
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQuerySucceeded), Function.createDelegate(this, this.onQueryFailed));
alert("retrieve list");
function onQuerySucceeded(sender, args) {
alert("succeed");
var listItemEnumerator = collListItem.getEnumerator(); var listItemEnumerator1 = collListItem1.getEnumerator(); var listItemEnumerator2 = collListItem2.getEnumerator();
var listItemEnumerator3 = collListItem3.getEnumerator(); var listItemEnumerator4 = collListItem4.getEnumerator(); var listItemEnumerator5 = collListItem5.getEnumerator(); var listItemEnumerator6 = collListItem6.getEnumerator();
var sumClose = 0; var sumClose1 = 0; var sumHigh = 0; var sumMedium = 0; var sumLow = 0; var sumLowMedium = 0; var sumMediumHigh = 0;
var sumOpen = 0; var sumOpen1 = 0; var sumHigh1 = 0; var sumMedium1 = 0; var sumLow1 = 0; var sumLowMedium1 = 0; var sumMediumHigh1 = 0;
while (listItemEnumerator.moveNext()) { var oListItem = listItemEnumerator.get_current(); sumClose += oListItem.get_item('Close'); sumOpen += oListItem.get_item('Open'); sumHigh += oListItem.get_item('High'); sumMedium += oListItem.get_item('Medium'); sumLow += oListItem.get_item('Low'); sumLowMedium += oListItem.get_item('LowMedium'); sumMediumHigh += oListItem.get_item('MediumHigh'); }
while (listItemEnumerator1.moveNext()) { var oListItem1 = listItemEnumerator1.get_current(); sumClose1 += oListItem1.get_item('Close'); sumOpen1 += oListItem1.get_item('Open'); sumHigh1 += oListItem1.get_item('High'); sumMedium1 += oListItem1.get_item('Medium'); sumLow1 += oListItem1.get_item('Low'); sumLowMedium1 += oListItem1.get_item('LowMedium'); sumMediumHigh1 += oListItem1.get_item('MediumHigh'); }
while (listItemEnumerator4.moveNext()) { var oListItem4 = listItemEnumerator4.get_current(); sumMinimal += oListItem4.get_item('Minimal'); sumModerate += oListItem4.get_item('Moderate'); sumSevere += oListItem4.get_item('Severe'); sumCritical += oListItem4.get_item('Critical'); }
while (listItemEnumerator5.moveNext()) { var oListItem5 = listItemEnumerator5.get_current(); sumUnlikely += oListItem5.get_item('Unlikely'); sumSomewhat += oListItem5.get_item('Somewhat'); sumLikely += oListItem5.get_item('Likely'); sumHighlyLikely += oListItem5.get_item('HighlyLikely'); }
while (listItemEnumerator6.moveNext()) { var oListItem6 = listItemEnumerator6.get_current(); sumBudget += oListItem6.get_item('Project_x0020_Budget_x0020_Amoun'); sumCommitted += oListItem6.get_item('Committed_x0020_Budget'); }
count = this.collListItem2.get_count();
count1 = this.collListItem3.get_count();
while (listItemEnumerator2.moveNext()) {
var oListItem2 = listItemEnumerator2.get_current();
var stat = oListItem2.get_item('Project_x0020_Status');
if (stat == "Intiation") {
initiate = initiate + 1
if (stat == "Planning") {
planning = planning + 1
if (stat == "Execution") {
execution = execution + 1
if (stat == "Closing") {
closing = closing + 1
//alert("initiate" + initiate); alert("planning" + planning); alert("execution" + execution); alert("closing" + closing);
//alert("countOpen" + count); alert("closed:" + count1);
window.close1 = sumClose; window.close2 = sumClose1; window.high = sumHigh; window.low = sumLow; window.medium = sumMedium; window.mediumHigh = sumMediumHigh; window.lowMedium = sumLowMedium;
window.open1 = sumOpen; window.open2 = sumOpen1; window.high1 = sumHigh1; window.low1 = sumLow1; window.medium1 = sumMedium1; window.mediumHigh1 = sumMediumHigh1; window.lowMedium1 = sumLowMedium1;
drawChart();
function onQueryFailed(sender, args) { alert('Request failed.. ' + args.get_message() + '\n' + args.get_stackTrace()); }
google.load("visualization", "1", { packages: ["corechart"] });
function drawChart() {
var data = google.visualization.arrayToDataTable([['Task', 'Issues'], ['Close', window.close1], ['Open', window.open1]]);
var data1 = google.visualization.arrayToDataTable([['Task', 'Risks'], ['Close', window.close2], ['Open', window.open2]]);
var data2 = google.visualization.arrayToDataTable([['Program', 'High', 'Medium-High', 'Medium', 'Low-Medium', 'Low'], ['Category', window.high, window.mediumHigh, window.medium, window.lowMedium, window.low]]);
var data3 = google.visualization.arrayToDataTable([['Program', 'High', 'Medium-High', 'Medium', 'Low-Medium', 'Low'], ['Category', window.high1, window.mediumHigh1, window.medium1, window.lowMedium1, window.low1]]);
var data4 = google.visualization.arrayToDataTable([['Project', 'Status'], ['Closed', count1], ['Open', count]]);
var data5 = google.visualization.arrayToDataTable([['Project', 'Status'], ['Initiation', initiate], ['Planning', planning], ['Execution', execution], ['Closing', closing]]);
var data6 = google.visualization.arrayToDataTable([['Program', 'Impact'], ['Minimal', sumMinimal], ['Moderate', sumModerate], ['Severe', sumSevere], ['Critical', sumCritical]]);
var data7 = google.visualization.arrayToDataTable([['Program', 'Probability'], ['Highly Likely/Probable(76%-100%)', sumHighlyLikely], ['Likely(51%-76%)', sumLikely], ['Somewhat Likely(26%-50%)', sumSomewhat], ['Unlikely/Improbable(0%-25%)', sumUnlikely]]);
var data8 = google.visualization.arrayToDataTable([['Project', 'Budget'], ['Approved', sumBudget], ['Committed', sumCommitted]]);
var options = { title: 'Program Issues', width: 200, height: 300, legend: 'bottom', pieSliceText: 'value', pieStartAngle: 180, };
var options1 = { title: 'Program Risks', width: 200, height: 300, legend: 'bottom', pieSliceText: 'value', pieStartAngle: 180, };
var options2 = { width: 200, height: 200, legend: { position: 'top', maxLines: 3 }, bar: { groupWidth: '25%' }, isStacked: true, vAxis: { title: 'Open', titleTextStyle: { color: 'red' } } };
var options3 = { width: 200, height: 200, legend: { position: 'top', maxLines: 3 }, bar: { groupWidth: '25%' }, isStacked: true, vAxis: { title: 'Open', titleTextStyle: { color: 'red' } } };
var options4 = { title: 'Project Status', width: 225, height: 300, legend: 'bottom', pieSliceText: 'value', pieStartAngle: 180, };
var options5 = { width: 175, height: 200, legend: { position: 'top', maxLines: 10 }, pieSliceText: 'value', };
var options6 = { title: 'Program Risk Impact', width: 300, height: 300, legend: 'right', pieSliceText: 'value', };
var options7 = { title: 'Program Risk Probable', width: 300, height: 300, legend: 'right', pieSliceText: 'value', };
var options8 = { title: 'Project Budget', width: 300, height: 300, legend: 'bottom', pieSliceText: 'value', };
var chart = new google.visualization.PieChart(document.getElementById('chart_div3'));
chart.draw(data, options);
var chart1 = new google.visualization.PieChart(document.getElementById('chart_div'));
chart1.draw(data1, options1);
var chart2 = new google.visualization.ColumnChart(document.getElementById('chart_div1'));
chart2.draw(data2, options2);
var chart3 = new google.visualization.ColumnChart(document.getElementById('chart_div2'));
chart3.draw(data3, options3);
var chart4 = new google.visualization.PieChart(document.getElementById('chart_div4'));
chart4.draw(data4, options4);
var chart5 = new google.visualization.PieChart(document.getElementById('chart_div5'));
chart5.draw(data5, options5);
var chart6 = new google.visualization.PieChart(document.getElementById('chart_div6'));
chart6.draw(data6, options6);
var chart7 = new google.visualization.PieChart(document.getElementById('chart_div7'));
chart7.draw(data7, options7);
var chart8 = new google.visualization.ColumnChart(document.getElementById('chart_div8'));
chart8.draw(data8, options8);
</script>
</head>
<body>
<table >
<tbody>
<tr>
<td id="chart_div8" colspan="2" style="border-bottom:ridge;border-left:ridge;border-top:ridge"></td>
<td id="chart_div4" style="border-bottom:ridge;border-left:ridge;border-top:ridge"></td>
<td id="chart_div5" style="border-bottom:ridge;border-right:ridge;border-top:ridge"></td>
</tr>
<tr>
<td id="chart_div" style="border-bottom:ridge;border-left:ridge;"></td>
<td id="chart_div2" style="border-bottom:ridge;"></td>
<td id="chart_div3" style="border-bottom:ridge;border-left:ridge;"></td>
<td id="chart_div1" style="border-bottom:ridge;border-right:ridge""></td>
</tr>
<tr>
<td id="chart_div6" colspan="2" style="border-bottom:ridge;border-left:ridge;"></td>
<td id="chart_div7" colspan="2" style="border-bottom:ridge;border-left:ridge;border-right:ridge"></td>
</tr>
</tbody>
</table>
</body>
</html>
This content editor webpart not working in sharepoint page. Once I checked out to the page then chart is working. When i checkedin function not get called. How to fix this?
THanks in advance!

In SharePoint 2013, sp.js and sp.runtime.js does not load on the page in published mode. You need to explicitly load these files. You can check using IE developer tools in the Script section that in published mode these files are missing.
In order to fix this issue explictly refer these two js files on your page.
<script type="text/javascript" src="_layouts/15/sp.runtime.js"></script>
<script type="text/javascript" src="_layouts/15/sp.js"></script>
Geetanjali Arora | My blogs |

Simple button script not working

I am using AS2 and need help figuring out why this simple button script is not working:
stop();
buttonWS1.onRelease = function(){
                    gotoAndStop("Stage1and2_Boss",4);
buttonWS2.onRelease = function(){
                    nextFrame();
//end
My buttons are the square letter-puzzles below. They are images that I converted to "symbols" (specifically, buttons). I put their names as above (buttonWS1, buttonWS2, etc.) in the "instance names" boxes.
I have no idea what is going on. Please help!

Hi -
1. Yes, buttonWS2 is the instance name
2. The only code attached to it is the code I pasted above.
3. onRelease does not execute because my trace statement does not appear in the output
Here is the modified code for buttonWS2:
buttonWS2.onRelease = function(){
                    trace("clicked!");
                    nextFrame();
Question: It shouldn't matter if I have commented-out code within that set of codes should it?:
buttonWS2.onRelease = function(){
          //if (puzzleschosenarray[0] == 2 || puzzleschosenarray[1] == 2) {
          // cannot be chosen -- make button non-functional
          //else{
                    //puzzleschosenarray[roundnumber-1] = 2;
                    trace("clicked!");
                    nextFrame();

Java script not working in 1 pdf, but same script is NOT working in other

Dear Experts,
I have a problem with java script.
I have created 2 PDFs with the same Form name and sub form names.
I have written a javascript and this script seems to be working in one (Demand2.pdf) and NOT working in the other (Sample.pdf).
The link for Demand2.pdf is
https://acrobat.com/#d=XIydWx1RIU4oNdTySHtHfg
and the link for sample.pdf is
https://acrobat.com/#d=sKPRs2dtDY57RSvMVtnh3w
Can you please guide me on this.
Many Thanks
BookFans

Hi,
The second file (Sample.pdf) is saved as Static. The script is changing the visual appearance of the form (showing and hiding objects). This requires the file to be saved as a Dynamic PDF. This is available in the save-as dialogue under the file name.
Good luck,
Niall

Shell script not working

Similar Messages

Maybe you are looking for