Shift Abbreviations in Shift Planning

Hello gurus,
Anyone ever experienced this?
i need to update It2003 with a period work schedule rule and not the Daily work schedule rule and it looks as though this is SAP STD that you can only work wirh DWS in shift planning.
Anyone with some crancking idea of how i can overcome this?
Regards
Sher

Dears...
I am already using the Enhancement package 4 and business function LOG_PP_SRN_CONF is already activated. But still Shift field is not appearing the confirmation screen (CO11N). Even in the "Single screen entry of confirmations" configuration also (transaction OPK0 in Default tab) Shift and shift grouping fields are in INACTIVE mode. Please let me know... how can make it active. So that I can use the shift field in CO11N transaction.
If you need any clarification please let me know.
Regards,
KN.
Edited by: Kodand Nag on Feb 6, 2010 11:28 AM

Similar Messages

  • Can I switch calendars (Ex. "night shift" to "day shift" cal) with a repeating event, but ONLY for that one event??  It asks "for all events or only this event" if i change the time.  But it changes ALL events when i try and switch calendars.  Any help??

    I have 2 calendars set up for my work schedule, a "night shift" and "day shift" calendar.  I've set up repeating events fro Fri/Sat/Sun 3-11pm "night shifts" and Mon/Tues 7am-3pm "day shifts".  But lets say for example that I swap shifts and instead of working nights on Saturday like I normally would, I am now working days.  I want to change that in my calendar.  When I go to change the event, if i change the TIME it asks if i want to change all event or ONLY this event.  no problem....just this single event.  but when i go to change the event from the "night shift" calendar to the "day shift" calendar, it changes ALL the repeating events, and not just that one single event.   can anyone help with this???  am i doing something wrong?  is there a way to do this or not with the new iCal program???  i used to do this and never had any problems.    Thank you!

    You need to follow iPhoto terms since we only know what you tell us
    what are you calling folders - in iPhoto folders can not hold photos - albums hold photos and folders hold albums or other folders
    The basic default view of photo is by event (iPhoto '08 and later)
    Exactly what you you trying to do?
    LN

  • ___Why does my command/shift space and shift key stop working?

    ___Why does my command/shift space and shift key stop working?
    For no apparent reasoon, some key combos like shift to keep aligned or command/shift space to zoom stop working - why is that?

    http://forums.adobe.com/message/2657882#2657882

  • Split data of 1st shift and 2nd shift

    Hi,
    I have an SSRS report that displayed the production data. It consist of data from 1st-Shift and 2nd-Shift . My SSRS has a parameter with FromDate and Todate, Time. the default date is today's date. My requirements is to
    obtain the data of 1st shift and 2nd shift on the same day and displayed into one report with separate column for 1st shift and 2ns shift. The 1st shift is always start at 6:00AM and end at 2:00PM while the 2nd shift start at 2:00PM and end at 10:00PM
    Btw, This report is run every hour. THe objective is to gather how the production perform.
    Any help is very much appreciated. Thanks
    Sample DDL
    Create table #sample
    (ID nvarchar(5), DateandTime datetime, qty int)
    Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 00:33:18.000',1)
    Insert into #sample(ID, dateandtime,qty) values('TTTT','2014-05-30 05:20:57.000',1)
    Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-29 23:09:33.000',1)
    Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 03:45:08.000',1)
    Insert into #sample(ID, dateandtime,qty) values('TTTT','2014-05-30 04:53:55.000',1)
    Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 06:00:06.000',1)
    Insert into #sample(ID, dateandtime,qty) values('XXXX','2014-05-30 06:15:41.000',1)
    Insert into #sample(ID, dateandtime,qty) values('TTTT','2014-05-30 06:07:08.000',1)
    Declare @timezoneOffset int, @D1 datetime, @D2 datetime, @Stime nvarchar(8), @ETime nvarchar(8),@FromDatetime datetime, @ToDatetime datetime
    Set @timezoneOffset=8
    Set @D1='2014-05-30'
    Set @D2='2014-05-30'
    set @Stime='06:00 AM'
    set @Etime='02:00 PM'
    Set @FromDatetime= @D1 +''+@Stime
    Set @ToDatetime= @D2 +''+@Etime
    SELECT *
    FROM #sample
    WHERE DATEADD(HOUR,convert(int,@timezoneOffset), dateandtime) BETWEEN (@Fromdatetime) AND (@ToDatetime)

    May I ask you assistance to fix this error.
    i wanted this code to have a timezoneoffset. 
    Also , i would like to ask if this is acceptable  in between  6:00 and 16:00, if more than 16:00 (this is 4:00PM) this would be now under shift 2. 
    case when DATEPART(hour,DateandTime)
    between 6 and
    16 then 1
    else 2 end
    as shiftID,
    I tried trid this but got an error:
    CASE WHEN DATEADD(HOUR,convert(int,@timezoneOffset), DateandTime)
    between 6 and
    16 then 1
    else 2 end
    as shiftID2

  • Final Cut Pro 7 Phase Shift of Field shift

    Good Afternoon....
    I am editing video shot on a DSLR and between every cut there is a freeze frame....
    I can't tell if it is a phase shift or field shift.
    Does anyone know how to fix this problem or a pay phone support
    service in Palm Beach Area?
    -Mat

    Select the sequence in the FCP Browser, then go to the menu File > Media Manager and use the Media Manager to Recompress your material.
    Choose recompress, then choose the correct flavor of ProRes for your Frame size and Frame Rate.
    Note that the resultant files will be considerably larger than the original. This is normal and correct as the highly compressed files are "unpacked" for editing use.
    MtD

  • Disable "shift + 1 " shortcut in Planning

    Hello
    Is it possible to disable the shortcut "shift + 1 " in the WebForm ? This shortcut lock the cells.
    Thanks
    Pierre

    You can disable drill through in the FDM adaptor options, set "Enable Drillable Region Load" to off.
    You will need to clear and reload the data if it has already been loaded with the drillable option on.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Configuring DWS for "split" shifts (or multiple shifts in same day)

    We need to set up a work schedule that spans a two week time period - employee works 42 hours per week - three 12 hour shifts and one 6 hour shift.  The rotation is as follows:
                                  Mon                    Tues                    Wed                    Thurs                    Fri                    Sat                    Sun
    Wk 1                      7pm-7:30am       7pm-1am              off                       7pm-7:30am         7pm-7:30am     off                    off
    Wk 2                      off                      off                        1am-7am             off                        off                   7pm-7:30am     7pm-7:30am
                                                                                    7pm-7:30am
    Our issue is Wednesday of Week 2.  The employees essentially works two shifts - 6 hours from 1am-7am, then 12 hours between 7pm and 7:30am the following day.  We have tried configuring a Wednesday flex time shift for 11 hours between 1am and midnight on Wednesday and a 7 hour shift on Thursday.  But when we enter hours in CATS for the Wednesday shift that span into the next day it automatically changes the end time to midnight.  Since we can't guarantee the employees will clock out for their 30 minute break at midnight this will not work.  Does anyone have a suggestion as to how we might configure this?

    Hello,
    You can configure the Previous Day Indicator to assign the working times to the previous day.
    Previous Day Indicator
    The previous day indicator in Time Management indicates that the record should be assigned to the previous day. It is relevant mainly to daily work schedules which bridge two calendar days (e.g. 22:00 - 06:00).
    Use
    You only use the previous day indicator if you record time data with clock times. The daily work schedule assigned to the employee always applies to the day on which the start time lies in this case.
    The information provided by the previous day indicator is therefore of central importance. There is no other way for the system to assign a record which has a start time a day later than the start time in the personal work schedule to the correct daily work schedule.
    Planned working time 22:00 - 06:00
    Record entered 02:00 - 05:00 -> previous day indicator
    is set
    Examples
    The daily work schedule NIGHT 2 comprises a planned working time of 22:00 through 06:00. An employee works the night from December 14 to December 15, and works a substitution for his/her foreman from 02:00 through 04:00.
    The previous day indicator was not set when the substitution was recorded. The substitution is therefore assigned to December 15 instead of December 14. This can lead to the following problems, for example:
    Collisions with substitutions on the following day.
    The substitution not being taken into account in payroll, as the following day is a Saturday and the employee does not have to work on Saturdays.
    I hope this clarifies for you.
    Bentow.

  • Track volume doesn't shift when I shift track contents, probably simple!

    Hi all,
    So I am creating a mix-tape for mothers day and am trying to blend/overlap tracks using Garageband. I have each mp3 in a separate track and each track's "Track Volume" enabled and taking care of fade in/out. But now I need to shift all the tracks down to add a new track, or to rearrange tracks but when I do the Track Volume curves stay put. Any ideas? I feel like I may be coming at this mix-tape thing the wrong way. Its my first time in Garageband but I am pretty computer savvy dude. Any help would be awesome! Thanks!
    -Brandon

    I just found the "Lock Automation Curves to Regions" in the Control menu.
    Exactly what I was looking for. Thanks to anyone to read this, I hope it helps someone.

  • Not able to use Shift field and Shift Grouping field while using OPK0

    Hi,
    I am using the SAP ECC 6.0 Enhancement Pack-4,
    In Transaction 'OPK0' while confuguring the default value for shift in the *Default* Tab, i am getting the 'Shift - field:SHIFT_PROP('Proposal Shift for Single-Screen Entry') and Shift Grouping, in Display mode, i have also tried to configure it with SAP4all  authorization, but still it was in Non editable mode.
    Also i tried applying Note:1177952, but was not able to apply the same, as we are already using Enhancement pack-4.
    let me know the solution to the above problem.
    Best Regards
    Vijay

    Hi Vijay,
    please follow the link given below and check whether the business function LOG_PP_SRN_CONF is activated or not?
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/e9/dc4715919d4245a9416c668b66133c/content.htm
    Regards,Kundan

  • My shift-r, right shift-f, and right shift-v is not working.

    I've seen questions in the forum about shift-r not working, I've looked into my system preferences and it appears there are no short cuts associated with shift-r.  My right shift-f and right shift-v are not working either.  I'm using a new iMac (10.7.2) with the bluetooth keyboard that came with it.  If I use caps lock I can get capital R, F and V.  It's very strange.  I'm assuming it's a setting that's messed up versus a bum keyboard?  Thanks for any help you can give!

    Good deal, glad it's taken care of. I had a wireless keyboard on which the caps lock key stayed lit all the time, even though it did turn the lock on and off. And sometimes it wouldn't light at all. I took it (just the keyboard) to a local AASP and they checked it out and called to say my new keyboard was ready to be picked up.

  • Ctrl+Shift do not shift between languages in Firefox and Opera browers

    Pressing Ctrl+Shift on the keyboard do not shift between languages when typing in Firefox and Opera browsers, but it works fine in Word and other applications. I have Windows XP SP3. My browsers are updated.

    Firefox has menu items that use the Shift and Ctrl modifier keys (e.g. Ctrl+Shift+Z = Redo) and those can interfere, especially when typing in a text area.
    You might have more luck with Alt and Shift instead.
    Try to assign different keyboard shortcuts to each of the installed languages instead of using a key sequence to cycle between installed language layouts.

  • How to make F9, Shift+F9, F10, Shift-F10 etc. work in FCP?

    I'm showing my Mac newness here, (only 1.5 years using Macs) but I can't for the life of me figure out how to use the editing shortcut keys (F9, F10, etc.) in Final Cut. They always perform the System shortcuts, not the Application shortcuts.
    I've tried following the directions in the FC manual, and nothing changes; still activates the system shortcuts.
    It would be great to be able to press Shift+F9 and have it insert with transition, but sadly, I'm "stuck" with drag&drop.
    Any suggestions?

    Thanks. It turns out (on my Mac at least) that just "unchecking" those keys doesn't do anything. (Maybe I should have rebooted???) Anyway, reprogramming the F11 and F12 keys and and freeing up the F9 and F10 keys seems to have made it work. Thanks for the tip.

  • Configuration for shift repor and shift note

    Hi all
    We have currently activated the shift report functionality of SAP . Does any can share the configuration details for PM module for the above as a reference
    With Regards
    Arun

    Hi,
    Kindly apply SAP Note 1415590.
    The note is as below:-
    Solution
    1. Display the domain (fixed value append) EHP3_RU_DT_DYNNR in
    transaction SE11.
    2. Choose menu item 'Goto > Translation'.
    3. Enter Original language: DE, Target language: EN.
    Press the green check mark button (Translate(Enter)).
    4. Expand Repository Texts '<VALU> Fixed Values for Domains'.
    5. Double click on 'EHP3_RU_DT_DYNNR'.
    6. Translate the fields as follows:
    Personal: Schicht ---> Personnel: Shift
    Kundenspezifische Felder von CI_AFRU -
    > Customer-Specific Fields of CI_AFRU
    Mengen: Unterteilte Mengen ---> Quantities: Subdivided Quantities
    7. Press the 'Save' button.
    8. Return to the display of EHP3_RU_DT_DYNNR and activate it.
    Once if u do as per this note and select shift Proposal in Single Screen Entry. Then u can get Operation wise confirmation based by Shift and when enter transaction co11N u may not get Shift but when u give order no then u will get the shift.
    with regards,
    Sandip Shrivas

  • Firefox captures Alt+Shift, but Alt+Shift+" is set as a dead key for my layout.

    I do some typing in other languages, so I've set up a custom keyboard layout with all the accented characters.
    I've set Alt+Shift+" as the dead key for the diaeresis (e.g., alt+shit+" i gives ï).
    They layout works system-wide, and I can use my other dead keys in Firefox, but not that one.
    It's not absolutely necessary, but it's pretty annoying.

    Some keyboard layouts like the "US International keyboard layout" can use the double quote (") as a dead key to add a diaeresis (I have a compose key on Linux), maybe that works better.
    *http://en.wikipedia.org/wiki/British_and_American_keyboards

  • CS5 illustrator 'shift arrow'/cmd shift arrow' keys wont work! (Help!)

    Hi,
    I have just installed the CS5 web suite and are loving it so far, however for some strange reason when I try to move an object or point by holding down the shift - arrrow or cmd shift arrow key, (as you do) nothing happens!
    Have tried restarting etc but to no avail... Works fine in Photoshop and other apps, but no go in ai... Any suggestions please as it's really annoying!
    (Never come across this before in previous versions..)
    Thanks,
    Dean

    It actually seem to have worked for you as well as you cannot copy and paste the settings folder from one version to another since the prefernces are tied to a different folder so if you moved or trashed the folder or replaced it in some way like changing the name of CS 4 to CS 5 then all you did is the same as above since Illustrator just created a new set of preferences and settings anyway.
    So the above actually worked for you once you quit and restarted Illustrator.
    Here look from my preferences folder CS 4 and CS 5 living confidentially side by side.
    BTW if you just removed the preference file within this folder you did not follow the instructions correctly you have to get rid of the whole settings folder.

Maybe you are looking for