Shift and Shift Differential Setup Logic

I am trying to understand the relationship with how shifts/shift differential policies/premiums work to together. I have been reading the user guides to try and setup my desired reqiurement, but am stuck so looking for help.
The scenario I have is this:
Shift from 7am - 3:30pm. Any hours worked outside this schedule are to be applied against a different pay code. I also need these hours to count towards overtime.
All hours will go against the "Regular Hours" pay code and all employees have a weekly overtime earning policy of 40 hours.
I tried setting up a shift with the above start/stop time and then created a workplan and linked that shift schedule. I also setup a new element for the shift diff override option because based on what I read it seemed like any hours outside that shift plan would be applied against that override element on the workplan. When I setup the element time information, all I filled out was the earning category of Shift Diff. I then created a rotation plan with just the one workplan and assigned it to the employee.
When I entered time for the employee via the TK screen of 0600 - 1600 and ran the transfer process, all hours went against the REG pay code and nothing slip up. I'm sure it has something to do with my setups, but I'm stuck on where to go from here. Any help would be great! Thanks.
Edited by: user12005697 on Sep 9, 2010 11:35 AM
Edited by: user12005697 on Sep 9, 2010 12:25 PM

user12005697,
You need to create a shift diff policy and also setup a premium eligibility policy.
--Shiv

Similar Messages

Is there a way to quickly preview blend modes, similar to the shift+ and shift- like AfterAffects?

This would seem to be a no brainer but nobody seems to know the answer.... I have a hard time believing I have to endure the sea-saw process of clicking on a given blend mode each time I want to preview an affect.

The next issue you will find with Blend Modes is "Opacity Droppings"
Anyone that uses Blend Modes...naturally uses Opacity as part of the setting. ie. the degree of blend.
(The two work hand in hand.)
Problem is.. as soon as you do this... an automatic opacity keyframe is created.
This is guaranteed to drive you nuts!
It does not work this way in AEFX . where it is more logically and practically implemented with a normal way of setting a keyframe manually.

What will happen if a maitain both standard available capacity and grouping key ( shift definition and shift sequence) in the capacity header of a work center?

Hi all,
Im little confused with the capacity header in work center. In the capacity header there is one place to give start time, end time, length of break and number of individual capacity. And in grouping key i can define the shift and shift sequence. So if im maintaining both of these ( standard avilable capacity and grouping key), which will be considered to calaculate avilable capacity?

Hi
If you are running three shifts ,please maintain the data as given belwo
start :00:00:00
End:23:59:59
Break :03:00:00 ( 1 Hour per shift so 3 hrs for 3 shifts)
No.of individual capacity :1
System will understand that it is round the clock operation with total three hour brak and you will get 21 hour per capacity
Hope this helps
regards
Prakash

How do I cut and shift tracks in Logic?

Hi could anyone tell me how I can cut tracks and move them later? In Protools I can just select the tracks where I want them to go but in Logic that doesn't seem to be the case. Some of my problem is I don't know the correct terminology that Logic uses to help myself. your help is greatly appreciated.

Thanks sample. so is this correct. I select say eight bars with the timeline (the part at the tup that turns green when selected) and then go to edit and select Splice: Insert snipped selection at play head? Is this the correct one to select? does this move everything else up eight bars? It's kind of confusing compared to protools where you just select it all and shift, which I can't seem to find out how to do in Logic, though I am sure Logic has all the capabilities of PT and more.

Report on power generation from each plant and shift wise(PP report)

Hi,
i got one Functional spec on pp module. this FS main object is calculate the daily smelter performance.
Based on this FS I will make a report on POWER GENERATION FROM EACH PLANT AND SHIFT WISE.
so please can anyone of you advice to me , is there any standard extractors and standard cubes or ods are there for make this report.
Regads,
Suresh.

Hi,
here i mentioned tables,fields and logic according to Fspec.
S.no          Report Field                                      SAP Table-field                                        Logic
   1               Shift                                              AFRU - KAPTPROG
    2              Unit                                                MKPF-VERID                                      Pass MATNR and VERID to AFPO and fetch AUFNR for all VERID and pass AUFNR to AFRU and fetch KAPTPROG and GMNGA for that particular BUDAT
3.            Total Generation                                    -                                         ADD all the unit GMNGA for Individual KAPTPROG
4.           Total Auxiliary Consumption                   -                                          Pass MATNR and AUFNR to MSEG and fetch the MBLNR and MJAHR. Check MSEG - MBLNR and MSEG u2013 MJAHR = MKPF - MBLNR and MKPF u2013 MJAHR
and fetch BUDAT for that particular date and pass it those MBLNR and MJAHR to MSEG and check for movement type 201 and fetch MENGE.
5.            Export to GRIDCO                               -                                            Pass MATNR and AUFNR to MSEG and fetch the MBLNR and MJAHR. Check MSEG - MBLNR and MSEG u2013 MJAHR = MKPF - MBLNR and MKPF u2013 MJAHR
and fetch BUDAT for that particular date and pass it those MBLNR and MJAHR to MSEG and check for movement type 261 and check for Field SHKZG if H fetch MENGE.
6.          Import to GRIDCO                               -                                                Pass MATNR and AUFNR to MSEG and fetch the MBLNR and MJAHR. Check MSEG - MBLNR and MSEG u2013 MJAHR = MKPF - MBLNR and MKPF u2013 MJAHR
and fetch BUDAT for that particular date and pass it those MBLNR and MJAHR to MSEG and check for movement type 101 and check for Field EBELN and fetch the MENGE.
7.        Smelter Consumption                                -                                            Pass MATNR and AUFNR to MSEG and fetch the MBLNR and MJAHR. Check MSEG - MBLNR and MSEG u2013 MJAHR = MKPF - MBLNR and MKPF u2013 MJAHR
and fetch BUDAT for that particular date and pass it those MBLNR and MJAHR to MSEG and check for movement type 201 and check for Field WERKS 1400 and display MENGE.
8.       Net Export / Import (MW)                                   -                                      Difference between Export to GRIDCO and Import to GRIDCO
Based on these information ,can please anyone advice to me, is there any standard extractors ,cubes and ods for make this report.
Thanks,
Suresh.

-shift-and-spacebar-functions-of-a-keyboard-are-out-of-order

i-have-a-HP HDX16t Premium Series Notebook PC.the-shift-and-spacebar-functions-of-a-keyboard-are-out-of-order.they-are-not-jamed,i-can-push-them,but-there-is-no-spacing-between-words,and-shiftbar-does-not-perfom-its-function-please-help-to-correct-the-problem-i-am-taking-classes-online-have-to-wright-research-papers-thank-you-in-advance-galyna

galyna wrote:
i-have-a-HP HDX16t Premium Series Notebook PC.the-shift-and-spacebar-functions-of-a-keyboard-are-out-of-order.they-are-not-jamed,i-can-push-them,but-there-is-no-spacing-between-words,and-shiftbar-does-not-perfom-its-function-please-help-to-correct-the-problem-i-am-taking-classes-online-have-to-wright-research-papers-thank-you-in-advance-galyna
If I understand correctly, you are saying that neither of the shift keys work and that the spacebar does not do anything? Which operating system is installed and  what keyboard is installed? (see image) Click on it and you will see which keyboard is installed. Do you have a multilingual user profie setup? That is the reason my keyboard shows in the taskbar.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Where in the function palette can i find the "logical shift" function (shift x by y bits)?

i am not able to find the "logical shift" function anywhere on the functions palette (after searching EVERY where). however, i discovered the function elsewhere in another VI (by pure luck!). i could keep bringing up these VI and copying and pasting, but that's a pain...i'd like to just have it on my functions palette to begin with.
i am running labview 6.1 thanks for your help.

hi,
LabVIEW's functions pallete has come with a very useful tool --> "Search" tool
Make use of the "Search" tool should you encounter difficulty in locating the desired function. For instants, search for keyword "Logical" or "Shift" and you will be able to locate the function
happy coding
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com

I am forced to hold shift and refresh the page on 99% of the sites I visit. How do I fix this from happening? If I don't the pages are missing style sheets and etc.

When ever I go to sites they half load or are missing style sheets. If I view the source for the page and click on a style sheet link I get the following error:
Content Encoding Error
The page you are trying to view cannot be shown because it uses an invalid or unsupported form of compression.
If I hold shift and refresh the page loads as normal.
It's happening on 99% of the sites I visit. I have disabled my plugins and add-ons.
I do have some add-ons or plugins that I would like to remove completely but there is no uninstall or remove option, neither in regular or safe mode.

'''I'm NOT buying a backup Computer till, Firefox will Run on Windows 8 !'''

How to delete video from iTunes library? del and shift+del are not working - no any reaction

how to delete video from iTunes library? del and shift+del are not working - no any reaction.

seb963 wrote:
Hi
Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

How can I re-arrange the pages in a Pages document now?? I used to be able to click on the thumbnails and shift their position which is important in creating documents. Any ideas?

How can I re-arrange the pages in a Pages document now?? I used to be able to click on the thumbnails and shift their position which is important in creating documents. Any ideas?

This feature has been removed from Pages 5 along with over 90 others:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Pages '09 is still in your Applications/iWork folder.
Trash/archive Pages 5 and rate/review it in the App Store.
Peter

Not able to use Shift field and Shift Grouping field while using OPK0

Hi,
I am using the SAP ECC 6.0 Enhancement Pack-4,
In Transaction 'OPK0' while confuguring the default value for shift in the *Default* Tab, i am getting the 'Shift - field:SHIFT_PROP('Proposal Shift for Single-Screen Entry') and Shift Grouping, in Display mode, i have also tried to configure it with SAP4all authorization, but still it was in Non editable mode.
Also i tried applying Note:1177952, but was not able to apply the same, as we are already using Enhancement pack-4.
let me know the solution to the above problem.
Best Regards
Vijay

Hi Vijay,
please follow the link given below and check whether the business function LOG_PP_SRN_CONF is activated or not?
http://help.sap.com/erp2005_ehp_03/helpdata/EN/e9/dc4715919d4245a9416c668b66133c/content.htm
Regards,Kundan

Photoshop CS4 Crashes when using shift and the move tool

Please help!
Everytime I click on a layer with the move tool while holding the shift button (so I can constrain the movement), photoshop crashes. I get a message that says, "Could not use the move tool because of a program error". And then photoshop just shuts down.
Now I can use the move tool without holding shift, but as soon as I hit the shift button and try them together . . . crash!
What is going on?
I'm wondering if it has something to do with an updated video driver that I installed yesterday. It wasn't doing this before that.
Suggestions anyone? Please Please Please Help!

Have you tried rolling back the driver to see if the fault disappears?
You could also try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

Problems with scrolling through premiere timeline using arrow keys and shift arrow

This is a really weird problem in cs6.
When I load a clip into the source monitor i can scroll throughit fine using the arrow keys, and shift arrows and my shuttle pro controller.
When I place the same clip on to the timeline it really struggles to scroll using the arrows or the shuttle pro, its really kerky and sdlwo to scroll the timeline, which is really frstrating, becuase it can play the footage fine in the source monitor.
The clips will playback fine, but scrolling through them just doesn't work as it should any ideas?
Cheers
Mike

I changed my shuttle settings to make the shuttling more responsive:
1 - 5 times second
2 - 10
3 - 15
4 - 30
5 - 45
6 - 60
7 - fast as possible
At least I changed this a long time ago - don't know if these are the defaults or not.
It'll only shuttle as fast as your system is responsive of course - so if you get instantaneous scrubbing by dragging the CTI in the timeline with the mouse, you should be able to get good performance with the shuttle. Of course that performance depends on the type of footage and how demanding it is on CPU to decode and whether youi have effects applied etc etc etc.
I edit pretty much exclusively with Sony XDCAM EX 1080P 25 footage we've shot on EX3 and PMW-350 etc and I get very very fast performance on the timeline - no issues at all i7 6 core 4GHz with 24Gb ram and fairly fast RAID array for footage.

Continuing... to select more points or items in illustrator with click shift and drag?

OK,
here is the dilemma, and i bet there is a nifty shortcut to it.
We all know how to continue select say object or points within illustrator yes, in saying this we will select one point, and then use thte mouse to select more points by covering space over a document, whilst holding shift(multiple itmes etc.)
As i am trying to select more points, but say, they are scattered small individual shapes, like say little specks of small shapes, but countless, millions, but at the same time i have other shapes which i dont want to select, but, i want to continue selecting shapes thouhgh whilst holding down shift, i dont want to reverse the procedure, i want to select more and more tiny dots, even if i click and drag over the already selected dots.
Now, how do i go about saying holding down an extra key, lets just say, the letter h for example on the keyboard, and it will activate the whole click drag and shift procedure but to not deselect the points i already i have selected..
If this does not make sense let us know, but i was wondering for what i am doing, i want to be able to continue working my way up with selecting a whole array of tiny shapes, but select more and more as i work my way up or down.
If you dont understand try it in illustrator first and see what i mean, then get back to us, as for what i am doing i need a shortcut, along with the shift key and click drag.
Thanks.
GaNa85

Short answer.. You can't. Shift-clicking is a toggle. It selects or deselects based on the current selection state. If you shift-click or shift-click-drag over a selected object, it will become deslected in all cases.
Long answer... Probects invoving intricate objects are generally best handled by good layer management. Setting up a project using layers as you construct can make selections much, much, easier in the long run. Of course, if something is already created it may not be an easy task to rethink layers. There's also the little known "Save Selection" item in the Select menu. This will allow you to save something you already have selected and reslect it later. You might find that you can shift-select an area, save that selection, then start selecting another areas. This doesn't really address your initial issue since you can't shift-load a selection to add it to the existing selection. But it may help with getting some things selected, then reselected easily.
You can also shift-click the selection circle next to an object in the Layers Panel. This avoids mis-clicks or accidentally selecting something you already had selected.

Enter and shift keys not working. HELP!!!

A few days ago my mouse started behaving erratically all of a sudden. It would move by itself, click apps, and switch tabs rapidly all on its own. I've had this computer for over 2 years and this has never happened before. Restarting and rebooting into safe mode didn't work, but one user suggested a PRAM reset and that fixed the mouse problem. However, my enter and shift key on the right side do not work now (this is much less annoying than the mouse problem, but still very inconvenient!). Restarting the computer and doing another PRAM reset doesn't work unfortunately. I also used the keyboard viewer to confirm that all but those two keys work. I don't think the issue is with keyboard lint because both keys worked fine before I tried the reset. Booting up in safe mode also doesn't fix the problem. It would be great if I could find a way to fix this here since I won't be able to go to an Apple genius bar until December!

Hello sandi3s,
The troubleshooting detailed below may help restore functionality to your MacBook Pro's keyboard.
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
Cheers,
Allen

Shift and Shift Differential Setup Logic

Similar Messages

Maybe you are looking for