Shift Bar Graph to the Right

Hi,
Is it possible to shift an OBIEE graph object to the right? We have this requirement so that the graph aligns well with the table below it.
We are currently on version 11.1.1.6.
For example:
bargraph1 bargraph2 bargraph3
tableHeading0 tableHeading1 tableHeading2 tableHeading3
What we would like is
bargraph1 bargraph2 bargraph3
tableHeading0 tableHeading1 tableHeading2 tableHeading3
Thank You!

Hi,
Report: Click on Format Container (A) -> Additional Formatting Options -> Left Padding : Enter the digit.
Correct me if am wrong..
Mark it helps.

Similar Messages

  • Today (6/1) the "My Usage" shows .7GB used (about 1/4 of my 3GB shaded in the bar-graph), and the solid-green in the bar graph representing only 1 day in the billing cycle.

    Today (6/1) the "My Usage" shows .7GB used (about 1/4 of my 3GB shaded in the bar-graph), and the solid-green in the bar graph representing only 1 day in the billing cycle. I'm trying to make sense of it.  My may statement shows 1.7GB - I think that's the period just ended.... and I can't imagine I've used 1/4 of my data already today before noon?  I'm guessing the 'My Usage" screens are not quite coordinated with the billing cycle - anyone else have ideas?

    ... guess the reply via email method doesn't quite work - I'll re-post here via website
    jejm1975
    Thanks for your message, but I don't believe it applies to the situation I described.
    What is described in my post is information from the Verizon website - My Verizon / View Usage. 
    It is not from my phone (which is not a Galaxy,btw)

  • How can I make the activity bar default to the right FF window bottom instead of the left?

    The activity bar that pops up whenever a page or page item is loading defaults to the left bottom of the FF 4.0 window. It shifts over to the right bottom when I put the mouse pointer on it. But then it's back on the left the next time. Is there any way to make it default to the right side permanently? With most sites it's less in the way there.

    Thanks. Rolling over it will force it to the right side, but just until it pops up again. Because it's forced to the opposite side anytime it's rolled over, I can't grab it to move it to the inactive Toolbar bin. If possible, I'd like to keep it but have it default to the right instead of the left.

  • IR Search bar display on the right when no data found

    How do I get the Interactive Search bar to be left justified when no data is found. I'm using Sand 10 Theme, and the region my interactive report is in is Page Template Region Position 3
    Does anyone have a suggestion on this?
    Edited by: deandyno on Aug 22, 2011 12:31 PM

    deandyno wrote:
    How do I get the Interactive Search bar to be left justified when no data is found. I'm using Sand 10 Theme, and the region my interactive report is in is Page Template Region Position 3
    Does anyone have a suggestion on this?Have you actually considered where Region Position 3 is located on the page? Content in regions that are located on the right tends to be displayed on the right.
    From the dimensions specified in the page templates it's also clear that region position 3 is intended to be used for narrower content than the average interactive report.
    Consider using either a more appropriate region position or a different theme (theme 10 is ugly as sin anyway).

  • How to plot bar graph in the real time?

    Hi guys
    I have n row and 3 column array, n will vary according the time, for example t=10ms, n=1;t=20ms, n=2;..., I would like to display all the data of the array in the bar graph  in real time. I tryied with example "array to bar graph demo.vi" but very time, only one row was displayed.
    Could anybody help me?
    Many thanks. 
    Sorry I don't know how to capture the picture from VI, so I pasted it diagram to word document.
    Attachments:
    question.doc ‏240 KB

    Where did you get this example. I can't find it listed in the current shipping examples.
    Also, posting a small image of a section of a block diagram is not much to work with. You are using local variables and a sequence structure. Neither one is a good sign. If you would simply post the actual VI (and any subVIs), it would be much easier to see what you mean.

  • When I access AOL on Firefox a "plug in tool bar" appears on the right side of my screen obliterating my scroll bar. How do I get rid of this annoying plug in bar?

    AOL says it's your browser that is causing this, not AOL and it makes AOL pretty useless to use on Firefox. Much easier to use Windows Explorer. Can you get rid of this "browse or add plug in" bar? How do I get around this? Using Firefox on a Windows Vista operating system.

    Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.
    You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).
    In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
    Make sure that "Load this bookmark in the sidebar" is not selected.

  • How do I get the scroll bar back to the right side of the screen and how do I get the mouse scroll wheel to work again?

    Yesterday the scroll bar on Firefox was moved from the right to the left of the screen and the webpages do not scroll when using the mouse scroll wheel.

    Reset the pref <b>layout.scrollbar.side</b> to '0' or set to '2' to place the scroll bar at the default right side.
    See:
    * http://kb.mozillazine.org/layout.scrollbar.side
    * http://kb.mozillazine.org/about%3Aconfig
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • My "menu bar" moves to the right

    My menu bar slowly drifts to away from the top left corner of my screen.
    I never see it happen but I just look up and it's moved.
    I am on 10.8.2 and when I open the notification centre, which shifts all my windows back to the left, the menu bar resets with it and it fixes it for a while.
    I've been doing using this as a fix for several months. but is there anyone else with this issue who has found a perminate fix?
    I've noticed it on both my iMac and Macbook Pro, running 10.8.1 and 10.8.2 respectively.
    Here is a selective screen grab from 10.8.2. 
    Thanks.
    Alex

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • I sthere any way to complete uninstall the "manage search bar" option from the right side?

    I found this option very annoying. I want to uninstall the "manage search bar"utility completely from my Firefox.

    My version of Firefox Mozilla, 3.6.3, for Windows XP SP2, shows on the "Navigational Toolbar", back and forward buttons, reload, cancel and home buttons, followed by the address bar, where you can writer web addresses, and on the right side, I have this utility, "Manage Search Engines", that looks like another address bar. I want to uninstall it completely. I don't see how I can do that. I mean, keep all the buttons intact, the address bar intact, and get rid of this tool. Thanks again.

  • Shifting a table to the right side of the window.

    Hi,
    I created a table in webdynpro. Its coming in left hand side by default. I want to shift it to the right hand side.
    Can anyone help.
    Regards,
    Abhishek

    Hi,
    Try this:
    Set the layout of the container as Grid Layout.Check the stretchedHorizontally layout property of the container. Now go to the LayoutData of the table and set the hAlign property as endOfLine.
    I hope it helps.
    Regards
    Arjun

  • Menu bar flashes on the right side of the screen

    My menu bar on the right side of the screen started flashing after the latest updates from Apple. I haven't changed any settings - just started flashing at various times.

    The menu bar is at the top of the screen, not on the right side. Is that what you mean?

  • Documents shift down and to the right when scaled and sent to CUPS server

    This problem has been driving me up a wall, and I hope that you all might have some insight.
    We have a CUPS server setup within our department. This server runs Ubuntu 6.06 and CUPS 1.2.7 with native postscript to a variety of HP printers including Color 4700, 2430, 4250, etc.
    When printing from OS X (10.4.X) Preview to the CUPS server, and the print is a PDF that is larger than letter size, the print is scaled down to the letter paper in the printer, but prins down and to the right. This happens on a variety of printers, and can also happen in Excel if the sheet are larger than Letter. We've tried every combination of paper size, scaling and borders that we could think of. I haven't been able to try this with OS X 10.3.X yet.
    Scaling and printing works fine if run through the built-in OS X CUPS server. Printing also works fine if Adobe Reader is used with the external CUPS server.

    Click and hold. Not right click.

  • Troubleshooting: Scroll bar goes to the right in LR2.3

    Not sure why this happens, but every so often - maybe once every couple days, I will be working in either the Library or Develop module and for no apparent reason, the scrollbar for the bottom filmstrip just starts moving on its own accord to the right until it gets to the end of the filmstrip. It keeps going to the right unless I close the program and start it back up again and then everything is fine again.
    Wondering why this occurs.
    Thanks

    kglad - that works perfectly.
    I was looking at the UIScroll component's properties, It
    never occurred to me to look at the TextField properties.
    Thanks.
    JL

  • 2010 Outlook Icon on Task Bar Shoots to the Right of the Screen When I Click On it

    When I click on my Outlook, it will no longer open to the full screen. The icon shoots off to the right and or stays very small on the taskbar and I can't open it. I've tried everything - maximizing, restore, size, and restarting my pc and nothing
    works. My provider (AT&T) said it's an Outlook problem, not a connection problem. It happened after I was receiving e-mail and the screen froze for a second. Please help.... thank you.

    Hi MsMagpie,
    Firstly, open your MS-Outlook in safe mode using the
    “Outlook.exe” command in the search box and disable the third party plug-ins. It seems like that they are creating bugs in your Outlook.
    And as you mentioned that this problem is related to Outlook on desktop side, so you need to disable the Antivirus/Firewall programs. In case, if these options will not
    work, then go for Inbox Repair Tool (scanpst.exe) which is a free inbuilt repair utility provided by Microsoft.
    Might be, there is corruption in your Outlook Data File, and this utility helps to repair such kinds of
    corruptions issues in Data file. 
    This blog can help you more:
    http://www.itninja.com/blog/view/how-to-fix-outlook-errors-manually
    Thanks
    Clark Kent

  • What is the "Other" in the bar graph of the HD Storage under system info?

    I have over 189 GB of storage being used and listed as "Other".  What could be causing this.  I've downloaded the WhatSize program to assist in finding the root of this problem but I was wondering specicically what to be looking for in the "Other" category.  Is this tied to my "Mail" program?  Are my emails and attachements stored on the hard drive of my MacBook?  Because if so then that could be a huge contributing factor.  Please, any ideas would be greatly appreciated because the 189 GB being used is out of a total 250 GB.  Basically I'm up to about 240 GB of a total capacity of 250 GB.

    Hope this helps.
    1. Empty Trash.
        http://support.apple.com/kb/PH10677
    2. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    3. Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836
    4. For more on this and very helpful tips:
        http://pondini.org/OSX/DiskSpace.html
        http://pondini.org/OSX/LionStorage.html
    5. Disk space / Time Machine ?/ Local Snapshots
       http://support.apple.com/kb/ht4878
    6 Re-index Macintosh HD
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409

Maybe you are looking for

  • How can I move IR receiver & iSight from one USB to port to another

    I have the latest 15" MBP, with two HS USB 2.0 ports. I need to have an open (nothing else on it) HS USB 2.0 port for a special application. How can I get my MBP to allow changing USB devices (IR Receiver & iSight) locations?

  • FUNCTION 'GUI_DOWNLOAD'

    Hi ! When i execute an Online  program that use  the function 'GUI_DOWNLOAD', then the program is running OK. However  When i execute  the same program in background i get an unknown error from the function 'GUI_DOWNLOAD' (return code 6 ) ! I wanted

  • Constraints are not created when using a cart

    Hi all, I have created a cart in SQL Developer with all the tables from HR schema. If I apply the cart to my database cloud service the tables and data are there but most of the constraints are missing. In log I can see error messages like: Error sta

  • Q10 Device Wont Recognize Contacts

    hello am having issues with this new blackberry Q10 and this is one of the issues blackberry wont recognize my contacts  get in coming calls and i do out going calls i dont see the names of the contacts when i receive a call and i dont see the name o

  • Need to get display only mode in ess

    Hello experts, What settings should I use so that on the ESS Personal Profile the users get a display only profile with a details button on the right as shown in the image. Currently the details only show up when somebody is maintaining the PERNR fro