Shift command E conflict with LR

Is anyone having this problem. To flatten layers I am using Shift Command E. I have been using this for years but now for some reason it is conflicting with LR in that the LR panel comes up when using this command in CC?!? This keyboard is also listened in LR as an export function...funnily enough when using it in LR nothing happens.
I can't seem to use this now in CC and can't figure a way to disconnect it in LR
Any suggestions?
Cheers
Gavin

Hi,
It's OptionCommand1
Dimaxum

Similar Messages

After using shift command 4 and send to desktop,how can I had iphoto to the list "open With" to preview menu?

After using shift command 4 to send a photo to the desktop, how can I add iphoto to the list of"open with" menu ?

All that's doing is forcing iPhoto to import the image. Dragging it to the iPhoto icon will do the same, or create an automator action and save it as a Contextual menu item.
Regards
TD

Shift + command + f   very slow with cs4 clone and healing tool?

using cs4-- i use the shift + command + f a lot to fade in or out the clone tool and healing brush.
however in cs4 the preview is very slow-- even though i have 8gb of ram!
the same process on the same file in cs3 is rapid-- even with only 2gb of ram-- so i assume this is a cs4 problem?
any solutions appreciated.

Do you mean photoshop elements 7 and not premiere elements?
The fix posted above only applies to linux os systems, which is
different from mac and windows.
On windows vista Alt+left click is to set the clone source.
Try the following steps one at a time.
1. reset the clone stamp tool by clicking triangle on the far left of the
   tool options bar and select reset tool.
2. Go to Edit>Preset Manager and click Done in the dialog that appears.
3. Reset the elements 7 preferences by holding down the Shift+Alt+Ctrl keys
    at the same time you start elements 7. In the dialog that appears, click yes.
Hope this helps.
MTSTUNER

Do I have a conflict with iTunes 7.6.2 . . or what ?

Dunno if I do or not, but . . shortly after upgrading to iTunes 7.6.2 we suffered a power "Blink" . . and when i noticed it had happened the Mac was attempting to restart . . with a blinking Mac, then a question mark in the icon . . nothing else . . In the past I've seen it once before, and a shutdown and restart was all that was necessary . . This time . . NO . . Nada, same deal, through 8 restarts . .
I finally reinstalled OSX 10.1, and followed with all the updates directly from Apple . . using the "Update" command under the apple . . It now does "funky" things . . like, one, it doesn't recognize the WD External HD on the desk top, but it does in the system profiler . . another, once in a while a dialog box comes up asking what to do with a disk, initialize, eject or ignore . . and probably what leads me to believe it could be a conflict with iTunes is during shut down, iTunes will not "Quit", even when using "Force Quit" . . it will close the desktop, go to a blue screen and then start up again . .
And . . I'd really like to install 10.4 but I can't seem to find anyone with a legal one for sale . . I called Apple a week ago and they said they might produce them in four or five weeks . . what's my options here?

None the less . . we still gots gremlins . .
And while I'm asking . . how come Safari is so fragile? The other nite, my wife and I were making reservations and one motel group's site crashed Safari just about 2/3ds the way through opening every time we tried . . went over to Explorer and it opened about twice as fast and operated smoothly . . This happens a lot at different sites . . always wants to know if I want to report it . . To Who?
Is 3.4.11 going to exorcise those gremlins or do I have to hire some IT Guy . . ? I've owned a Mac of some kind since the Mac IIx, (about 5, I think) but it's a tool, not a toy to me . . I just drive it . . run McJanitor once a month, clean out the icons in Safari's library and all the little maintenance thingies, but I'm no troubleshooter . . .

Left side shift/command/option keys not working

I have a 2010 11" macbook air and out of nowhere my left side Shift Command Option keys are not working at all. Anyone had this issue? or know what I can do to solve it?
I have tried connecting my keyboard to it and doing the reset PRAM, SMC, PMU with no luck. I tried installing new Mountain Lion OSX hoping it was a software issue and it is still not working.

I had a key fail on my MBA and the problem progressed to other keys. It turned out to be the electoonics in the keyboard, not the individual keys. When it progressed to W, I had to replace it;) Given you have two keys failing at once it could be a similar problem.

RMAN-05001 auxiliary .... conflicts with a file used by the target database

I can´t recreate my physical standby.
It worked in the past.
Now I reinstalled the 3 standbyclients.
Copied the spfile from the primary - modified the entries and did a rman backup.
But when issuing the duplicate database command - it comes up with the error above
SPFILE standyby db:
*.db_file_name_convert='+DATA/prim/','+DATA/stdy/','+RECOVERY/prim','+RECOVERY/stdy'
*.log_file_name_convert='+DATA/prim/','+DATA/stdy/','+RECOVERY/prim','+RECOVERY/stdy'
Starting restore at 15-APR-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle/stage/33lb65n2_1_1
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=/oracle/stage/33lb65n2_1_1 tag=TAG20100415T102434
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:11
output filename=+REDO1/stdy/controlfile/current.262.716293055
output filename=+REDO2/stdy/controlfile/backup.262.716293055
Finished restore at 15-APR-10
sql statement: alter database mount standby database
released channel: ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 04/15/2010 10:31:46
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename DATA/prim/datafile/system.262.715097535 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/sysaux.263.715097499 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/undotbs3.269.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/undotbs2.270.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/example.272.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/users.268.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/sysaux.273.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/undotbs1.271.710521021 conflicts with a file used by the target database+
RMAN-05001: auxiliary filename DATA/prim/datafile/system.264.710521021 conflicts with a file used by the target database+

Hi ,
I feel you are using ASM but still check the below details:
Cause
Production and Auxiliary have same directory structure and are running on two different machines. RMAN must be told not check that the target datafiles are sharing the same names as the duplicated files being created. Otherwise, the following errors will be returned:
RMAN-05001: auxiliary filename /qmaxnt/u04/qmaxntorafiles/table/QMAXAD08_03.dbf
conflicts with a file used by the target database
RMAN-05001: auxiliary filename /qmaxnt/u04/qmaxntorafiles/table/QMAXAD08_02.dbf
Solution
To implement the solution, please use nofilenamecheck in syntax as follows:
1. Connect to Target, auxiliary, and rman catalog and
2. use script as
run{
set until time "to_date('2005/09/17 14:00:00','yyyy/mm/dd HH24:MI:SS')";
allocate auxiliary channel aux1 type 'sbt_tape';
allocate auxiliary channel aux2 type 'sbt_tape';
duplicate target database for standby dorecover nofilenamecheck;
Make sure to use auxiliary type of channel so RMAN restore take place at auxiliary database.
Thanks,
Rafi.
http://rafioracledba.blogspot.com/

Auxiliary filename conflicts with a file used by the target database

Hi,
I am using RMAN backup to duplicate my prod database.
My database is 10g on Linux.
My RMAN script is like this
connect auxiliary /;
connect catalog rman/rman@catalog;
connect target sys/sys@prod;
sql "alter session set optimizer_mode=RULE";
run {
allocate auxiliary channel dup1 type disk;
allocate auxiliary channel dup2 type disk;
allocate auxiliary channel dup3 type disk;
set newname for datafile 1 to '/d05/u08/oracle/qadata/system01.dbf';
set newname for datafile 2 to '/d05/u08/oracle/qadata/system02.dbf';
set newname for datafile 3 to '/d05/u08/oracle/qadata/system03.dbf';
set newname for tempfile 1 to '/d05/u09/oracle/qadata/temp01.dbf';
set newname for tempfile 2 to '/d05/u09/oracle/qadata/temp02.dbf';
set newname for tempfile 3 to '/d05/u09/oracle/qadata/temp03.dbf';
set newname for tempfile 4 to '/d05/u09/oracle/qadata/temp04.dbf';
duplicate target database to qa logfile
group 1 ('/d05/u09/oracle/qadata/log1a.log',
'/d05/u09/oracle/qadata/log1b.log') size 50m,
group 2 ('/d05/u09/oracle/qadata/log2a.log',
'/d05/u09/oracle/qadata/log2b.log') size 50m,
group 3 ('/d05/u09/oracle/qadata/log3a.log',
'/d05/u09/oracle/qadata/log3b.log') size 50m;
I am getting the following error in the middle
Starting Duplicate Db at 18-SEP-10
released channel: dup1
released channel: dup2
released channel: dup3
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/18/2010 11:32:07
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary filename /db01/u08/oracle/proddata/GRCM.dbf conflicts with a file used by the target database
Recovery Manager complete.
Previously the duplicate db was successful, but now it is giving error.
How can I solve this.
Thanks,
Kavitha

5001, 1, "auxiliary file name %s conflicts with a file used by the target database"
// *Cause: RMAN is attempting to use the specified file name as a restore
//         destination in the auxiliary database, but this name is already
//         in use by the target database.
// *Action: Use the CONFIGURE AUXNAME command to specify a name for the data
//          file that does not conflict with a file name in use by the
//          target db.

Static Policy NAT in VPN conflicts with Static NAT

I have a situation where I need to create a site-to-site VPN between an ASA 5505 using IOS 7.2 and a Sonicwall NSA4500. The problem arises in that the LAN behind the Cisco ASA has the same subnet as a currently existing VPN created on the Sonicwall. Since the Sonicwall can't have two VPNs both going to the same subnet, the solution is to use policy NAT on the ASA so that to the Sonicwall, the new VPN appears to have a different subnet.
The current subnet behind the ASA is 192.168.10.0/24 (The Sonicwall already has a VPN created to a different client with that same subnet). I am trying to translate that to 192.168.24.0/24. The peer LAN (behind the Sonicwall) is 10.159.0.0/24. The pertinent configuration of the ASA is:
interface Vlan1
ip address 192.168.10.1 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.24.0 255.255.255.0 10.159.0.0 255.255.255.0
access-list VPN extended permit ip 192.168.10.0 255.255.255.0 10.159.0.0 255.255.255.0
static (inside,outside) 192.168.24.0 access-list VPN
crypto map outside_map 1 match address outside_1_cryptomap
In addition to this, there are other static NAT statements and their associated ACLs that allow certain traffic through the firewall to the server, e.g.:
static (inside,outside) tcp interface smtp SERVER smtp netmask 255.255.255.255
The problem is this: When I enter the static policy NAT statement, I get the message "Warning: real-address conflict with existing static" and then it refers to each of the static NAT statements that translate the outside address to the server. I thought about this, and it seemed to me that the problem was that the policy NAT statement needed to be the first NAT statement (it is last) so that it would be handled first and all traffic destined for the VPN tunnel to the Sonicwall (destination 10.159.0.0/24) would be correctly handled. If I left it as the last statement, then the other static NAT statements would prevent some traffic destined for the 10.159.0.0/24 network from being correctly routed through the VPN.
So I tried first to move my policy NAT statement up in the ASDM GUI. However, moving that statement was not permitted. Then I tried deleting the five static NAT statements that point to the server (one example is above) and then recreating them, hoping that would then move the policy NAT statement to the top. This also failed.
What am I missing?

Hi,
To be honest it should work in the way I mentioned. I am not sure why it would change the order of the NAT configurations. I have run into this situation on some ASA firewalls running the older software (older than 8.2) and the reordering of the configurations has always worked.
So I am not sure are we looking at some bug or what the problem is.
I was wondering if one solution would be to configure all of the Static NAT / Static PAT as Static Policy NAT/PAT
I have gotten a bit rusty on the older (8.2 and older) NAT configuration format as over 90% of our customer firewalls are running 8.3+ software.
I was thinking of this kind of "static" configuration for the existing Static PAT configurations if you want to try
access-list STATICPAT-SMTP permit tcp host eq smtp any
static (inside,outside) tcp interface smtp access-list STATICPAT-SMTP
access-list STATICPAT-HTTPS permit tcp host eq https any
static (inside,outside) tcp interface https access-list STATICPAT-HTTPS
access-list STATICPAT-RDP permit tcp host eq 3389 any
static (inside,outside) tcp interface 3389 access-list STATICPAT-RDP
access-list STATICPAT-TCP4125 permit tcp host eq 4125 any
static (inside,outside) tcp interface 4125 access-list STATICPAT-TCP4125
access-list STATICPAT-POP3 permit tcp host eq pop3 any
static (inside,outside) tcp interface pop3 access-list STATICPAT-POP3
Naturally you would add the Static Policy NAT for the VPN first.
Again I have to say that I am not 100% sure if this was is the correct format maybe you can test it with a single service that has a Static PAT. For example the Static PAT for RDP (TCP/3389). First entering the Static Policy NAT then removing the Static PAT and then entering the Static Policy PAT.
Remember that you should be able to test the translations with the "packet-tracer" command
For example
packet-tracer input outside tcp 1.1.1.1 12345
- Jouni

Rollover conflicting with js slideshow

I am creating a new look for my website and I have a draft of the new homepage at http://nysipm.cornell.edu/2nd_page/2nd_page/default_backup.asp
My next step is to add a link to our Events Calendar page via a rollover image. I have tried adding the rollover ("Events Calendar", on the right) using the Insert > Image Objects > Rollover Image. You can see the result at http://nysipm.cornell.edu/2nd_page/2nd_page/default.asp
The rollover does not work (although it links correctly), and my slideshow has completely disappeared! I figure that the rollover commands are conflicting somehow with the slideshow commands, but since they reside in different divs, I can't understand how. Any ideas?
Karen

problelm solved! I had the files/fodler in a sub folder. A little confusing to why it wouldnt work being the page was in a sub folder but anyways
Thanks

How to disable Option-Shift-Command-Q (Log Out immediately)

Does anybody know, how I can disable the shortcut Option-Shift-Command-Q, which Log me out immeditely. That’s because I sometimes hit this combination accidently while trying to press Option-Shift-Command-A or Option-Shift-Q (for the French quotation mark »).
I have tried to assign a new shortcut for the menu item using the system preference panel, but this doesn’t work.
I hope, someone can help me with this because it drives me crazy ...
Thnaks!

Thanks for the suggestion but that didn't help. I don't have a keyboard & mouse pane I only have keyboard or mouse to choose from, so I go to keyboard and there is nothing that looks like that screen. But I did find something that fixed my Command/Option/Control buttons from being locked, I clicked on Keyboard & then Modifier Keys, and it let me select no action for each of those, BUT it doesn't have the Shift option.
So now my problem is, when I press Shift twice in a row, it makes it lock. It's as if I'm holding down Shift all the time and I have to press Shift again to unlock it. I want to disable this. Does anyone have any ideas how to do that? I think I explained it wrong in my 1st post I thought I'd explain again (: But now I figured out it's called Modifier Keys soo I feel like I'm close to finding the answer. lol (:

Path is reverse of what I need....Can I alter the path so the shift/command/I is saved

First of all thanks for looking.
CS4
OS10.5.5
mac book pro
Sometimes when I path an image I will get the opposite effect.
The object will be removed instead of the background. This is shown in the path window panel as the object (a guitar) is dark and the background is light. When I activate the path - then copy and paste the image the object is removed not the background.
I know I can shift/command/I to reverse the path but that does not correct the file. It is permanently saved as the opposite of what I want.
I want to create .tiffs that I can take into Indesign and utilize the path. But with the current file I only get the background with the guitar removed.
Is there a way truly reverse the paths information (resulting in showing the object light and background dark in the path panel icon)
I called tech support and they told me it's a file problem and should do behave this way. It happened in cs2 and cs4
I suspect I am causing this to happen but I don't know what I'm doing.
I pathed 30 files and about 10 came out this way.
thanks
tq

thanks. I read something like that in the forum before I made my post. I tried it but it had no affect on my files....
( I also asked the Adobe tech about it; telling him it did not work for me - oddly enough he told me tech does not support forum solutions:-)
With the path selected, should it be as simple as clicking the pen tool and clicking the 2nd box in the options
I've also tried this with the path highlighted, non highlighted and inverted.
Nothing works.
tq

Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another.

Hello, I am filtering by date
DATEADD(d,DATEDIFF(d,0,GETDATE()),0), but
doing like below gives me an error
ADODB.Command error '800a0bb9'
Arguments are of the wrong type, are out of acceptable range,
or are in
conflict with one another.
/aa.asp, line 19
line 19 is
Recordset1_cmd.Parameters.Append
Recordset1_cmd.CreateParameter("param1",
135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
any one have any idea as to why
grateful for any help
thanks
k
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>

<%
Dim Recordset1__MMColParam
Recordset1__MMColParam =
"DATEADD(dd,DATEDIFF(d,0,GETDATE()),0)"
If (Request("MM_EmptyValue") <> "") Then
Recordset1__MMColParam = Request("MM_EmptyValue")
End If
%>
<%
Dim Recordset1
Dim Recordset1_cmd
Dim Recordset1_numRows
Set Recordset1_cmd = Server.CreateObject ("ADODB.Command")
Recordset1_cmd.ActiveConnection = MM_connpeepeek_STRING
Recordset1_cmd.CommandText = "SELECT usr_image1,
dateimage_usr FROM
diddle.ps_usr_image WHERE dateimage_usr = ?"
Recordset1_cmd.Prepared = true
Recordset1_cmd.Parameters.Append
Recordset1_cmd.CreateParameter("param1",
135, 1, -1, Recordset1__MMColParam) ' adDBTimeStamp
Set Recordset1 = Recordset1_cmd.Execute
Recordset1_numRows = 0
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8">
<title>Untitled Document</title>
</head>
<body>
</body>
</html>
<%
Recordset1.Close()
Set Recordset1 = Nothing
%>

Ben,
If dbo.TG_Account is a table in your FDM database, then you should be able to populate the recordset with:
strSQLAcct = "SELECT Account FROM dbo.TG_Account"
Set rsAcct = DW.DataAccess.farsFireHose(strSQLAcct, False)

Is there a conflict with Mountain Lion and ATT air card?

I have an ATT USBconnect Momentum 4G air card. Ever since I installed Mountain Lion I am getting an error message that says that something is trying to modify the configuration. Is there a conflict with Mountain Lion and the ATT 4G air card? If so, is there something I can do about it? Thanks!

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

How to disable Shift-Command-C command?

How do i disable the Shift-Command-C command?
(It clashes with the cheat console in spore and they are both activated by Shift-Command-C)
Any help welcome.

Hi,
Most likely it will be in System Preferences > Keyboard > Keyboard Shortcuts
10:26 PM Sunday; December 30, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Shift Command 3 Not Working, Any Suggestions?

Hello, My Shift, Command, 3 does not take a screen shots any more. I tried to delete (com.apple.symbolichotkeys.plist) and reboot but it did not work. Im using OS10.8.5 on a Mid 2007 iMac. Also I bought this from my friend and I changed the Name of the iMac & Disk, But the "HOME" Still has my fiends name why is this? Can anyone help me here? Thanks!

The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.

Shift command E conflict with LR

Similar Messages

Maybe you are looking for