Shift definitions for work center capacity planning
Is there a way to create a 9-80 work schedule over a 2 week period. Client doesn't want to maintain date every two weeks.
Hi Dean,
Could you please eloborate your requirement?
Regards,
Prasobh
Similar Messages
-
Maintenance Work Center : Capacity Planning CM01
Hello Gurus,
We are using T-code CM01 to determine the Requirements / RemAvailCap of the Maintenance Work Orders in a given Maintenance Work Center.
After executing CM01, the detail capacity list contains Not Scheduled orders( CRTD )and capacity of these not Released orders also taking into consider.
How to restrict CM01 Order selection based on the work order System status or User status ?
I found below discussions on SCN but couldn't get precise answere.
Plant Maintenance: Capacity planning CM01/ CM07
Configuring profiles in CAPACITY PLANNING (CM07)
Please help.
Thanks in Advance
Ashok MThere are a few ways:
Create a new status profile via BS42 and assign the REL status only (see image 1). Then in the CM01 display screen, use menu path: Planning->Selection->Order and enter the status profile created above (see image 2)
Create a new selection combination via OAP0. In the CM01 display screen, use menu path: Planning->Selection->Combination and enter the selection combination created above (see image 3)
The above settings can then be defaulted via the various capacity planning profiles. -
hello
is it possible to hav shift report workcentewise? if yes how config is done?In T.code : SHR0 (zero) Shift Report overview.
Enter Report Type and Usage as workcentre, please do the this customazation then you find workcentres in F4.
http://help.sap.com/erp2005_ehp_03/helpdata/en/45/c9ba093c512e96e10000000a155369/frameset.htm
Please read the information from above link this should help.
Jim -
Blocking of work center capacity for capacity planning
How can i block a work center capacity for capacity planning during Machine breakdown( via a Preventive maintenance order)?
i believe it will reduce machine capacity, yet how can i view this, against the previous capacity? is there a possible report or can it be shown through a transaction?Hi,
In capacity header details screen not exactly as "can be used for capacity evaluation " but
"relevent to finite sceduling"
"can be used for several operations"
"long term planning"
these all indicators you can deflag this and check the results ,it may helpful to you. -
Work Center Capacity Shift Interval
Hello,
I'm looking for a function or Tables from which I can get Work Center Capacity Shift & Interval data, Transaction CRC3.
Any help in this regard will be highly appreciated.
Regards,
Hashir Ahmed.hi,
check these tables.
AFIH Transparent table Maintenance order header Application table (master and transaction data)
AFKO Transparent table Order header data PP orders Application table (master and transaction data)
AFRU Transparent table Order Confirmations Application table (master and transaction data)
AFVC Transparent table Operation within an order Application table (master and transaction data)
CABN Transparent table Characteristic Application table (master and transaction data)
CBPR Transparent table CO-ABC: Activity Master Table Application table (master and transaction data)
COEP Transparent table CO Object: Line Items (by Period) Application table (master and transaction data)
CRCA Transparent table Work Center Capacity Allocation Application table (master and transaction data)
CRHD Transparent table Work Center Header Application table (master and transaction data)
CSKS Transparent table Cost Center Master Data Application table (master and transaction data)
CSSL Transparent table Cost Center / Activity Type Application table (master and transaction data) -
Long-term planning: planning details of work center capacity
Hi,
we need to know what is the effect on planned production orders (generated by MPS, transaction MD40) of the flag <b>“long-term planning”</b> in planning details of work center capacity (table name: RC68K; field name: KAPLPL). We made a test analyzing planned orders scheduling details in <i>Stock requirements list</i> (MD04) and in the <i>Planning table</i> (CM21) in both cases: with "long-term planning" flag set and without this flag for the same work center.
The schedule of planned production order on that work center is the same in the two instance.
Could you suggest us something?
Thank you.Hi Rudy,
Purpose for carrying out Long Term Planning to simulate impact of Future Demand Program on
u2022 Material Requirements
u2022 Capacity Requirements
u2022 Material Cost budgeting (activity by Accounts dept.)
T.Codes used -
u2022 Demand MD61, MD62, MD63
u2022 Scenario Creation MS31, MS32, MS33
u2022 LTP Variant Creation & Execution MSBT, SM37
u2022 LTP statistics Evaluation SM37, MS04
u2022 Data Set Up MS70, MSB&
u2022 Evaluation based on Set up data MCB), MCEA, MCEB, MCEC
u2022 Capacity Evaluation CM38
To Summarize -
u2022 In long-term planning, production plans for future demand programs are simulated using MRP runs with reference to the planning scenarios.
u2022 The parameters for the simulation in the simulation planning area are defined in the scenario.
u2022 The Evaluation of LTP Statistics enables identification of Material for which LTP processing was terminated.
u2022 The Data set for purchasing & Inventory Control enables reports for demand analysis
u2022 LTP run with setting for u201CLead time scheduling and capacity planningu201D enables simulation of capacity situation/overload on work centers.
Hope it is helpful to you.
Srini -
Work center-CApacity-Work force planning
Dear Expert !
Please tell me all necessary steps to configure Work center , Capacity and workforce planning .........please provide me all the information of business scenerio where I can use this at user level....with screen shot.
Thanks in Advance
ROBERT SMITH "HP"Check out below links....
http://help.sap.com/bp_bblibrary/600/Documentation/Q60_BB_ConfigGuide_EN_US.doc
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPCRPPS/PPCRP_PS.pdf
Venkat -
Work Center Capacity Intervals
HI,
Where can I get the work center capacity interval dates i.e. valid from, valid to and corresponding week days that are being populated in the table control when you follow the following path in transaction IR03->Enter Work Center and Plant-> Press Enter->Go to Capacity Tab-> Press Capacity Button on the lower left hand corner->Press Intervals and shifts
My requirement is to calculate the weekly capacity of a work center. I have to find the valid interval for current date then find the number of working days in this interval so that I can use it in calculating the weekly capacity.
Regards,
Bharat.I de-bugged the main program behind IR03 and found out that the Valid-from-date is being calculated during runtime for all the records from table KAPA for given work center KAPID.
Anyway thank you all who cared to check the thread.
Regards,
Bharat. -
Work center capacity header freezed
Dear Gurus,
we're not able to edit the work center capacity header. not able to edit the start and finish times.
it is happening only for one work center. in other work centers same capacity category is editable.
Please help us in resolving this.
Regards,
GowriHi,
Check your work center categeroy definition for which edit is not possible.
The work center category determines which data can be maintained in a work center.
Each work center category is assigned to the applications (for example, production, plant maintenance or quality management) whose menus allow you to maintain work centers with this category.
Each work center category has a number of screens assigned to it which the system displays when work centers of this category are displayed. The screens contain groups of fields (for example, scheduling data). Depending on the work center category, you can make field selections on these screens (for example, defining required entry fields).
Thanks,
nandha -
How to find the reporting for work center machine wise
hi gurus
My question is . In one work center machine capacity category 2 machines are used. Client is asking the report machine wise. i.e as 2 machines are available .What is the capacity utilisation for each machine.Provide me the information for this. Thanks in advance
kalyanHi Kalyan
you have to make some settings in production order & work center first.
In work center capacity header ,you have to make indiovidual capacities as 2.
In the same capacity header screen by going through the menu Goto--->individual capacitities define these different individual machines.
In the production order operation detail screen goto " capacity reqmt assignment " assign the quantities for different work centers.
Adfter this in the confirmation CO11N you have to fill the split field accordingly& confirm different wortk centers seoperatley.
Then you can the report in the CO14 for diferent work centers.
you try this.
Regards
YMREDDY -
User Exit or DB-Table for Work Center (CR01)
Hi!
I have an external software which must be triggered when the user changes a work center in SAP (transaction CR01,CR02). I was looking for an user exit to do what ever is necessary but I couldn't find one.
So, does anybody know an user exit or BADI for work center?
Also possible:
The database table where work center are stored. So I could poll against this table and check if a work center was changed. I found the table SGOSHIST which log all modified objects in SAP. So this could maybe used to check for modified work center, I think.
Thanks,
Konrad> You can check the BADI definition from transaction SE18,
> 'LTRM_WORK_CNTR_DTRM', this might be helpful,
How can I check this BADI. If I use SE18, it doas not exist, buit if I try to create it, the system tells me that it already exists in the SAP Original System... and asks me if I want to create a copy of it! I don't know what to do at this point!
> Work center details are avilable in CRHD table, you can
> look for CR* from SE11 transaction,
I know, but if you change the description of the work center, it is stored in CRTX. there are a lot of CR* tables. It would be helpful to have a table which is updated every time a work center is modified!
Thanks,
Konrad -
Hi
Is there any table for work center which shows available capacity v/s utilized capacity......Please revert with your valuable comments
RgdsHi,
Check Table RC65L.
Regards
Kannan -
Work center capacity or WT generic
Dear All
Is it possible to have Work center determination based on Bin capacity ,
if not then as second option
Is it possible to have WT generic for work center determination where in the picker based on the available work center will enter the bin and confirm the task.
Please confirm with the storage type settings/role to accomplish the above..
regards
SaravanaHi
Request you guys to validate the Work center functionality summarized below and provide your feedback/clarification if any.
Case 1: User decides on the bin during confirmation
It is realized through POSC setting for OB02 ,,either having storage type or type and section without bin.
Open Points:
WT generic setting at storage type doesn't need to be generic ( values 1 and 2) , It can still remain as not generic (=with Bin)
It doesn't work based on work center determination setting(/SCWM/PACKSTDT) and having rule based checked at POSC..
Case 2: User will drop the picked items in common work center
It is done by having common Inbound section shared between multiple work centers and then the pack center user drags and drops the items/HU from common bin to working bin .. If required there can be an additional bin to reflect the completed work.
Case 3: Based on consolidation group
It is achieved by having Consolidation group as Put away rule and work center determination based on consolidation group.(/SCWM/PACKSTDT)
System dynamically determines the bin per consolidation group.
Open Points:
If there is no work center available during picking for a particular consolidation group ( means all available work center are occupied with different consolidation groups) then surprisingly the pick is directed to staging area ( Is this expected behavior??)
Case 4: Work center determination Based on Remaining capacity
BADI Development..
Thanks Juergen for your inputs ,, Now i am convinced with the validation( error message) at storage type configuration of having both storage type role E and capacity check active..
regards
Saravana -
Customization Setting for Work center creation
Dear all,
What is the Customization Setting for Work center creation? How to do it?Hi,
Here are the few things you can check
OP40 : WC category
OP17 : Formula for WC
Person responsible : Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers >>Define Employees Responsible for Work Centers
apart from above You can explore more in
Plant Maintenance and Customer Service >> Maintenance Plans, Work Centers, Task Lists and PRTs >>Work Centers
Riyaj -
Hello experts
I am truing to compare between actual Work center capacity (I am using data source 2LIS_04_P_ARBPL).
And standard work center capacity (transaction cro3 in the R3)
I canu2019t find an info cube or data source that will help we extract the standard capacity.
Thanks.
Tal shalomHello,
You can use [0PP_C13 InfoCube (Capacity Load Utilization)|http://help.sap.com/bp_biv170/BBLibrary/documentation/B58_BB_ConfigGuide_EN_DE.doc]
Thanks
Chandran
Maybe you are looking for
-
My PC recently got a virus and wiped the hard drive. I used itunes for my ipod. I would like to know if the music i had on itunes is stored on my computer or on the net? So in other words can i still access my itunes from a different computer?
-
External Drive with Time Machine Disappears
I use time machine to backup my hard drive to a Book Studio External Hard Drive. But after a day or two, the icon for the backup will disappear off the desktop and the system stops doing the automatic backcups. It is relatively easily bring it back
-
List of reports using custom OM object
Hi Experts, I have a requirement to retrieve all the reports and interfaces which are using a custom OM object. Since I cannot do a where used list for the custom object in HRP 1000, which approach I should use ? Thanks in advance. Regards, Megha
-
Does after effects have something similar to "scenes" in Flash?
Hi, total After Effects newbie and I've checked the help and FAQ and some tutorials and can't find the answer. I'd like to create various independent scenes of each section of a movie, that I could later rearrange in the timeline. So instead of going
-
so i got a 30 gig ipod today and loaded all my music through itunes. i'm starting to notice that for certain artists i'm not able to access all of the music i've loaded. it appears that if i only have music from one album loaded for a given artist, t