Shift factor is not working with Depreciation Base method- 0004

Hello,
When I am changing shift factor and variable depreciation portion in asset master data. Its not calculating depreciation as per shift factor.
What can be the reason behind it.
Even I have already maintained config in depreciation key also for multiple shift.
regards

Hi,
Shift factor works only with the variable portion of ordinary depreciation. The variable factor is defined as depreciation area level.
"When you use depreciation with a multiple shift factor, the system
multiplies the variable depreciation portion by the multiple shift factor"
In depreciation area tab of asset master data double click on the depreciation area. You can check the variable portion can be see under "Additional Specifications" tab. If the value is 0 then the shift factor will not work.
Regards,
Ritesh

Similar Messages

  • Graphite base station not working with my Intel Based Mac Mini and iPhone.

    My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
    Message was edited by: Soriano

    I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
    In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
    The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
    The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
    After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
    The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
    I hope this helps.

  • Debit/Credit Shift not working with report painter

    Dears,
    We have defined debit/credit shift while defining financial
    statement version. This functionality working well with F.01 however its not
    working with report painter results. any help will be highly appreciated
    Regards,
    FR

    Hi Dave,
    I have gone back to the books (JP Terry's "Creating Dynamic Forms with Adobe LiveCycle Designer") and think we can improve on things...
    var oFields = xfa.resolveNodes("ViolationsText[*].DebitVal"); // looks to resolve the repeating rows (I think)
    var nNodesLength = oFields.length; // assigns the number of rows to a variable
    var sumTotal = 0; // this is a temporary holding variable for the total, during the loop
    for (var i = 0; i < nNodesLength; i++) // this loops through as previous example
         if (oFields.ViolationsText[i].resolveNode("DebitVal").rawValue == "C")
              sumTotal = "";
              i = nNodesLength;  // stops the loop
         else
              sumTotal += oFields.ViolationsText[i].resolveNode("DebitVal").rawValue;
    this.rawValue = sumTotal;
    This would go in the calculate event of your Total Debit Points field. I would be amazed if it worked first time. I haven't run through LC. Give it a lash!! (a try!!)
    Good luck,
    Niall

  • Right shift key not working with middle row of letters

    The right shift key on my Macbook Pro does not work with the middle row of letters. It works with all other letters and numbers, just not A-L. Nothing out of the ordinary happened, it just stopped capitalizing

    Try resetting your SMC and PRAM.
    Resetting the System Management Controller >>
    If that does not work, test it using an external keyboard.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • Using shift key not working with bluetooth keyboard

    Am I missing something here? Or does the shift key not work with the iphone using a bluetooth keyboard?  I'm using the logitech K810 for reference on iphone 6 iOS 8.1

    The shift key works just fine on my Bluetooth keyboard.  So I would imagine this is an issue with your keyboard.

  • Capital Y not working with SHIFT

    Shift y does not work on my OSX 10.7. I can do a Caps Lock Y, but not shift. Anyone else have the same problem? It seems to be my only letter having this problem.

    Hey
    I am having the same issue.  Shift key works fine, Y key works fine normally.  Together = nothing.  How did you go resolving this?  I am tempted to buy a new keyboard to see if that works

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • [LAVA Cross Post] CTRL+SHIFT+ Shortcuts sometimes not working in LabVIEW

    Cross-post from LAVA: http://lavag.org/topic/15619-ctrlshift-shortcuts-sometimes-not-working-in-labview/
    See the above post for more information - here's a synopsis:
    CTRL+SHIFT modifiers are not working while running LabVIEW in a Parallels 7 virtual machine. This problem affects both LV2011 and LV2012. I'm not certain that this is a LabVIEW bug - could be an issue with my virtual machine environment or it's configuration - except that CTRL+SHIFT modifiers work in other applications on the affected VMs. It's just LabVIEW that appears to ignore shortcuts with the CTRL+SHIFT modifiers.
    Any ideas? 
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

    X. wrote:
    Still well and alive in Parallels 9 and LabVIEW 2013 SP1. Of course I could upgrade to the latest versions to check whether things have gotten any better.
    Any news on that?
    @mellroth figured out the solution :-)
    a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

  • Modifer keys do not work with mouse in Illustrator

    Below is a copy of a bug report I just submitted to Adobe. I don't suppose any users have run across this and found a solution or workaround?
    I found someone else with this problem in an archived topic thread, but the only response that poor fellow got was an accusation of not following instructions (His problem wasn't user error, BTW).
    Thanks
    ******BUG******
    Concise problem statement:
    Modifer keys do not work with mouse: For example, free transform or rotate behaviors that require "Click-Ctrl" .
    Steps to reproduce bug:
    1. select object
    2. select free transform tool
    3. left click (without releasing) a corner of the bounding box.
    4. start dragging
    5. press ctrl
    Results:
    object behaves as though the ctrl key was not pressed. i.e. the cursor does not change shape and the object scales rather than distorts.
    Expected results: The cursor should change shape as the ctrl key is pressed and the object should distort rather than scale.
    Additional information: This behavior is intermittent. Occasionally Illustrator recognizes the "Click-Ctrl" combination and behaves exactly as the help file predicts it will. The cursor changes shape and the object distorts rather than scales. I can offer no rhyme or reason for when Illustrator will behave as advertised and when it will ignore the modifier keys.
    The example above involves the free transform tool, but the problem occurs just as often with other tool behaviors that require a modifier key + mouse combination.
    Primarily using Wacom Intuos3 tablet. (with latest drivers), but have also tried combinations with microsoft mouse or both mice installed.
    Also, immediately after an occurrence Illustrator bug, left AI open, went to a different app that uses mouse+modifier (Ctrl+Click). That different app recognizes Ctrl+Click with no problems whatsoever.

    Thanks Guys,
    Good to know it's working for you. I guess that's the nature of intermittent bugs. Of course, Adobe's bug report form has a field for version, which I, of course, filled in. Sorry I didn't add it to this post. I'm using the latest version CS3 v13.0.2.
    Stephen,
    Sorry I was not more clear when I said, "For example, ...". I was talking about the modifier keys not working with several different tools. The Free Transform tool advertises functionality that is supposed to work with a "Click (down, but don't release)then hold down Ctrl" combination. The Rotate tool advertises a behavior that is supposed to work with an "Alt-Click" combination. These are just 2 examples of the modifier keys not working. I focused primarily on one example in the bug report(ctrl after and in addition to click in the free transform tool, not alt-click in the rotate tool).
    Here is what I expect(quoted from Adobe's CS3 help file)
    (From the "Distort Objects with the Free transform tool" help topic)
    "Select one or more objects.
    Select the Free Transform tool .
    Start dragging a corner handle on the bounding box (not a side handle), and then do one of the following:
    Hold down Ctrl (Windows) or Command (Mac OS) until the selection is at the desired level of distortion.
    Hold down Shift+Alt+Ctrl (Windows) or Shift+Option+Command (Mac OS) to distort in perspective."
    (from the "Rotate an object by a specific angle" help topic:)
    You can control the exact angle of rotation with the Rotate command.
    Select one or more objects.
    "Do one of the following:
    To rotate around the center point, choose Object > Transform > Rotate, or double-click the Rotate tool.
    To rotate around a different reference point, select the Rotate tool. Then Alt‑click (Windows) or Option‑click (Mac OS) where you want the reference point to be in the document window.
    Enter the rotation angle in the Angle text box...."
    These Tool based mouse-key combinations do occasionally work as they are supposed to, so I know what the expected results are supposed to look like, but whether they work or not appears to depend on the phase of the moon, the day of the week, and the color of the president's underwear.
    Other non-tool based mouse-key combinations in Illustrator work consistently all the time - Ctrl-A for Select All as just one example that always works.
    Thanks Again

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • Upgraded to Firefox 4 and now the program I many alarm dealers use with Rapid Response Monitoring no longer works. RR Tech support said it had something to do with a change in Java not working with Firef 4

    Rapid Response Monitoring Center developed a program for their dealers to log on to the main frame and look at customer info. The program now has a disclaimer on the log-on page Does not work with FireFox 4. RR tech support said it had to do with Java functions that were not continued in FF4. I can log on but the program will no longer display customer history or anything that seems to have a data base behind the function tab.
    See www.rapidweb2000.com or call 1-800-932-3822 and ask for tech support for additional info about what they have found is the problem.

    Id this the HP SimplePass Identity manager or Digital Persona fingerprint reader? If it is, the company that make the fingerprint reader have abandoned it. For more details see https://support.mozilla.com/en-US/questions/799388

  • HP Laserjet 4 plus not working with Powerbook G4 & 10.5.8

    I have been using a Powerbook G4 running 10.4.11 with a HP Laserjet 4 plus without any problems. Last week I updated my G4 to 10.5.8. To acheive this, I purchased a full retail 10.1 DVD from Ebay installed it then updated to 10.5.8 using Apples Update Software feature. I believe all the features of my computer work except printing. Previously I have been using an apple wireless network without any problems.
    Now when using 10.5.8 I have tried this:
    1) select system preferences
    2) then select print & fax
    3) then click on the plus sign to add a printer
    4) the window that shows up that says default, fax. ip, windows, bluetooth, apple talk, more printers across the top of it.
    5) In this window the are two Laserjet 4 plus machines listed. One is listed with Appletalk and one is listed with Bonjour Shared. I only own one machine. I have tried selecting both of them separately and each time the same problem continues to happen.
    Each time either of the Laserjet 4 plus printers are selected the "Print Using" pull down menu begins searching for new drivers. The gray circular animation just goes round and round and eventually does not do anything. Obviously something has not installed correctly. Or there is a conflict somewhere that I have not been able to figure out.
    I have downloaded and installed the HP Laserjet and Edgeline print-only.mpkg from HP's website. The problem still exists.
    A family member in my household is using an Intel MacBook Pro running 10.5.8 with this same HP Laserjet 4 Plus on the same bonjour shared network without any problems. This being the case, I am confident the old HP 4 Plus printer will work with 10.5.8 using an apple wireless network.
    Any help would be appreciated.
    Thank you,
    Conrad
    NY

    The HP 4 printer has a JetDirect card in the back of it. The JetDirect card has a 10BaseT ethernet which I connected with an ethernet cable to an airport express base station. The express unit communicates with the main airport unit in my home.
    Many years ago I worked for a company that rebuilt macintosh computers and hardware for resale. I rebuilt this HP printer from spare parts and added the JetDirect card at that time and have not had any major problems with the unit until now. It had no problems or printing errors when I was running 10.4.11.
    I neglected to mention that after the printer would not work with 10.5.8 I went back and tried to reinstall the optional printer driver package on the original 10.5.1 installation DVD. When this did not work either, I downloaded the HP print driver package available from their website. Could I have somehow screwed this up by installing the incorrect or uncompatible print drivers?
    Thank you for your help. I really appreciate it.
    Conrad

  • I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with

    I had an iphone 4s and it worked nice with facetime and imessage using my phone number but  it was stolen on December so I buy a new iphone 4s using the same cellphone number  but now imessage and facetime does not work with my number, it only works with my apple ID.   Please Help me I speak Spanish so  if my English is not ok  I´m sorry about it.
    Do you think that apple has to   reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s?? 

    I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more.  I am not always somewhere I can charge my phone.
    Your points are true; however it doesn't help me......

  • External isight not working with Macbook Pro early 2008

    My external isight is not working with my Macbook Pro early 2008 (2.4 GHz, Intel Core 2 Duo, 6 GB RAM, OSX Lion). It goes warm when plugged into the firewire port but is not recognized in system prefs (lists as "unknown device" and also does not turn on (green light. I tried resetting PRAM and all the other stuff as suggested here but no luck. It used to work fine on a 1st generation Macbook and I remember that one of the first times I tried it with this machine here it turned on for a few secs (green light) but then it just simply stopped.
    Unfortunately, I have no other firewire device to check the port.
    Any ideas, dear community?

    Our (old) external Firewire iSights can be sensitive to dust, shock, vibration, humidity, and other environmental factors in storage.  (I store my spare in its original plastic shipping case with a new desiccant pack on a solid shelf - never in a desk drawer or other container that moves.) 
    You have tried several good things and may be finding that your old iSight needs work. 
    Here are the alternatives I can offer.  Consider any you have not tried in any order you like:
    (1) You can try Apple's suggestions from http://support.apple.com/kb/HT2090
    Test in more than one user account and with more than one Apple softwre application.
    (2) My expanded suggestions here: http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
    (3) Reset Firewire ports using the info from this old archived Apple article: http://web.archive.org/web/20090331211534/http://support.apple.com/kb/HT1317
    (4) If you have no local Apple Authorized service Provider who can help you, other service options are here: http://www.apple.com/support/isight/service/
    (5) Consider a new USB cam with current warranty such as one of these: http://www.mac-compatible-web-cam.com/
    Message was edited by: EZ Jim

  • Shift q is not working

    On my new iMac, my son noticed that the left shift will not work with the letter q. I have made sure that any keyboard shortcuts are set to the original defaults. Something is preventing this from working. The shift works with all other keys. The right hand shift works with the q. Any thoughts?

    OK, sometimes the simplest answer is the obvious one - the keyboard has an issue, not the computer.

Maybe you are looking for