Shift from SD to Security

Hi Guys,
I need your valuable suggestion.I am presently working as SAP SD consultant for the past 5 years,i was thinking of shifting my present domain from SAP SD to SAP security as i feel SAP security would always have more job opportunities and also can fetch a stable job if one thinks in the long run as wherever there is SAP installation whether its R/3 or BW or APO..etc.. a company would be needing guys to look after their system and security.
So could you please suggest me if it is a wise desicion, secondly what are the prerequisite to get into SAP security domain.
Thank you,

hi vivek,
each and every module has got its own importance, but as u said where ever there in a SAP system u need guys to maintain it.yes absolutely right.since u have 5 years of experience with Sd module it helps.bcoz u will be able to understand the structural part of the authorizations which is very important in the what u derive for ur respective organisation level.the only prerequisite of SAP SECURITY is that u need to think logically thats it.if u can think which is going to effect where , thats it u got what u need.just like in SD module u cannot perform end to end process in BASIS also u cannot perform end to end so i suggest u to select one topic in BASIS and concentrate on it.
regards
pavan

Similar Messages

Can I stop Windows 7 from warning about security on every linked PDF?

I am working on a project for which I have created one central document (an index) and 120 linked documents. Each document, on every page, has links to the next alphabetical document and back to the central index. This project will be distributed on disc to people with unknown computer platforms.
I am a Mac user, and this works well on my iMac using Adobe Reader. It also works on my ancient Windows XP machine. A tech friend has looked the project over, and he says that on Windows 7 (used by more than half of computer users), every time a document links to a new document, Windows 7 throws up a warning about PDF security hazards. With a large number of documents to open, this could be tiresome.
Is there a way to stop Windows 7 from warning about security on every linked PDF?
This tech person recommends joining all the PDFs into one file (around 50 MB by his estimate), which would require relinking every current link.
Acrobat offers to do the same with its Portfolio, but I'm not fond of the graphic styles offered, and I worry that one large file might be a challenge for older machines.
Any suggestions?

Can you get a screen shot of this error message or at least the exact wording? I suspect the error message is being displayed by Reader/Acrobat and not Windows.

How can I be sure the popups asking for my master password come from the Software Security Device ?

I did setup a master password on my Firefox. I therefore have the Software Security Device asking for my master password now and then as a popup, but I have no way to be sure that the popup is coming from the Software Security Device.
How can I be sure that it's not coming from a website or an extension trying to steal my passwords ?

That message will not be from Mozilla, there are rogue sites that use this method to try to get people to install malware/viruses/trojans. Do not install anything from that site.

[Request] Move Windows Control Panel applet from "System and Security" to "Programs"

The "Flash Player (32-bit)" Windows Control Panel applet should be moved from "System and Security" to "Programs" where the Java applet is.
Vote: https://bugbase.adobe.com/index.cfm?event=bug&id=2953107
Thanks

njb,
Why not just run the ThinkVantage System Update and let it install as usual. You can also "un-check" those drivers that you don't want to install.
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

I shifted from a windows to a mac.. I want to add songs to my ipod tpuch 4th gen.. but if i try to sync with itunes it says my songs will be replaced by the new songs.. Is there any way that i can have my previous data safe??

i shifted from a windows to a mac.. I want to add songs to my ipod tpuch 4th gen.. but if i try to sync with itunes it says my songs will be replaced by the new songs.. Is there any way that i can have my previous data safe??

Your iPod can only be synced with one computer at a time. If you try to sync it with a new computer/iTunes library, it will replace the contents of the iPod with whatever is in the new library. You should probably disable the autosync functionality first by going to Edit -> Preferences, clicking the Devices tab, and enabling the prevent iPods,iPhones, and iPads from automatically syncing option.
Before doing anything else, authorize the new computer with your iTunes Account. In iTunes, choose Store -> Authorize This Computer and enter in the correct credentials. Either copy a backup file from your old computer to your new one or create a new backup of your iPod in iTunes before letting it sync.
Then right->click on your iPod Touch from under the Devices section in the left hand pane of iTunes and choose Backup. You might also want to take a look at this article to see what it all included in the backup.
iOS: How to back up
Now onto synced content such as music, videos, photos, etc. For iTunes purchases you can copy them back into iTunes by choosing File -> Transfer Purchases. For all other nonpurchased iTunes content, see this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Once the backup has been made and all other synced content such as music, videos, and photos are back in your iTunes library, restore your iPod from that backup you made earlier. Here is more on backing up and restoring your iPod.
iTunes: Backing up, updating, and restoring iOS software
If you do happen to lose any purchased content, you can always redownload it from the iTunes Store again at no cost via iCloud. See this article for information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
B-rock

Archived Log is not shifting from Primary to DR

we have increase the table size without taking care of DR, so
sapdata1 becomes 100% at DR site after that applying archived had
stopped at DR, after that i manually added datafile using following
commands,
select * from v$recover_file where error like '%FILE%';
Primary-:
1)select file#,name from v$datafile where file#=33;
/oracle/BP1/sapdata1/sr3_21/sr3.data21
2)select file#,name from v$datafile where file#=34;
/oracle/BP1/sapdata1/sr3_22/sr3.data22
alter system set standby_file_management =Manual;
DR-:
1)select file#,name from v$datafile where file#=33;
/oracle/BP1/102_64/dbs/UNNAMED00033
2)select file#,name from v$datafile where file#=34;
/oracle/BP1/102_64/dbs/UNNAMED00034
alter database create datafile '/oracle/BP1/102_64/dbs/UNNAMED00033'
as '/oracle/BP1/sapdata1/sr3_21/sr3.data21';
alter database create datafile '/oracle/BP1/102_64/dbs/UNNAMED00034'
as '/oracle/BP1/sapdata1/sr3_22/sr3.data22';
alter system set standby_file_management =Auto;
alter database recover managed standby database disconnect from
session;
after that all logfile which is available at DR is applied but now
automatic shifting from primary to DR is not happen, please check and
provide the solution as early as possible because if log gap increase
we have to go for backup and restore and our DR site is so far.

Dear Orkun Gedik ,
Please find the Aler Log-:
Errors in file /oracle/BP1/saptrace/background/bp1_mrp0_20361.trc:
ORA-00313: open failed for members of log group 1 of thread 1
Thu Aug 11 18:39:53 2011
Errors in file /oracle/BP1/saptrace/background/bp1_mrp0_20361.trc:
ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/oracle/BP1/origlogA/log_g11m1.dbf'
Clearing online redo logfile 1 complete
Please find the log for bp1_mrp0_20361.trc
Start recovery at thread 1 ckpt scn 232442669 logseq 4297 block 2
2011-08-11 18:39:53.881
Media Recovery add redo thread 1
2011-08-11 18:39:53.881 1180 krsm.c
Managed Recovery: Active posted.
ORA-00313: open failed for members of log group 1 of thread 1
2011-08-11 18:39:53.891 64311 /se_autofs/patch_archive/102044/197/10107454/k
crr.c
Clearing online redo logfile 1 /oracle/BP1/origlogA/log_g11m1.dbf
ORA-00313: open failed for members of log group 1 of thread 1
ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/oracle/BP1/origlogA/log_g11m1.dbf'
Error 19527 creating/clearing online redo logfile 1
2011-08-11 18:39:53.950 64311 /se_autofs/patch_archive/102044/197/10107454/k
crr.c
Clearing online redo logfile 1 complete
2011-08-11 18:39:53.960 64311 /se_autofs/patch_archive/102044/197/10107454/k
crr.c
Media Recovery Waiting for thread 1 sequence 4297

Shift from ABAP to BW

Hello everyone,
I want to shift from ABAP to BW and want to learn HANA.Can you please help me with some material? And also please guide if ABAP skills will also get utilized there?I have 4.2 yrs of exp in ABAP..
Br
Sumeet

Hi sumeet durgia
Let me try to help you here.
In traditional BW, there is lot of scope for ABAP.So your idea of shifting doesn't have any problem.Now SAP's roadmap is towards HANA, its good if you can understand the concepts of BW on HANA too.
Your 4+ years of ABAP can certainly be used in BW/traditional DB or HANA; that is for sure.
FYI: New certifications have come up on the topic like BW on HANA, ABAP for HANA and so on.
Regarding materials:
There are huge number of documents available in this SDN space: SAP BW Powered by HANA.
Also see www.saphana.com, https://cookbook.experiencesaphana.com/bw/ and so on for some wonderful materials.
I am afraid you might not be getting any SAP certification documents here in this forum as its against the policy.
Please let us know if you have queries on any specific topics.
Good Luck.
BR
Prabhith

Shifting from the second page printed

hi,
I create a report with reports10g .
the size of the output paper is 15.2 * 21 cm. the papers used are continuous paper with matrix printer .
I have a problem shifting from the second page printed.
how to solve this problem?
thank you in advance

Hey Tom - sorry I failed to mention I did try powering off and on, and then the reset as you suggested. It still does the same thing.

Gamma shift from Capture & Log

I'm getting this dramatic gamma shift from my Capture & Log window. When I hit Capture Now, the preview image is a lot lighter.
Any way I can get the two matched up?

No. It is just a reference so you can see what you have. It isn't in any way a TRUE representation of the image you have. FOr that you use an external broadcast monitor connected via a capture card/device. The computer monitor is the LAST place to judge quality.
Shane

Is there a free trial for iwork? I would like to see how feasible it is before shifting from MS Office which i use presently?

is there a free trial for iwork? I would like to see how feasible it is before shifting from MS Office which i use presently?

No, there isn't, but if there's a store which sells Macs nearby, you may be able to try it out there.
(68360)

The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.

Last night, some of our systems installed updates released on 11/13/2014.
KB3021674
KB2901983
KB3023266
KB3014029
KB3022777
KB3020388
KB890830
Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Security log over and over:
Log Name:      Security
Source:        Microsoft-Windows-Eventlog
Date:          1/15/2015 11:12:39 AM
Event ID:      1108
Task Category: Event processing
Level:         Error
Keywords:      Audit Success
User:          N/A
Description:
The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.
Servers running Windows Server 2008 that also installed the updates are not experiencing the problem. It looks like one of the updates may have introduced this problem with Server 2008 R2.

...Did you for sure confirm that:
https://technet.microsoft.com/library/security/MS15-001
is the cause?
I did. I had a VM that was not experiencing the problem. I took a snapshot and tested the patches one by one. Installing only KB3023266 immediately caused the issue to occur (after reboot). A similar process was used to confirm that
installing KB2675611 resolved the problem.
Note that I found the installation of KB2675611 is usually quick, but it took several hours hours to install on some of our systems. We had installed this patch a few months ago on a couple of servers and it was always quick to install. But,
it seems like installing it on a symptomatic system can cause it to take a long time.

Color Shift from PS to Fireworks CS 3

How do I correctly manage the color between the CS3
application so that the color does not shift from Photoshop to
Fireworks in CS3. I have tried switching the color in convert to
profile in photoshop then save the file and re-open in FW and still
a huge change. I have switched the Bridge Profile for all
applications across CS3 and they are not consistent.

Expression 3, Expression Design or Expression Media?
pixlor wrote:
> I'm slightly confused. Is it that the programs
display the colors
> differently or that the colors
change when you save images? If you
> select a pixel and use the eyedropper tool to read its
color, do you get the
> same or different RGB values from both programs?
>
> I'm on Windows Vista, and not (as far as I know) using
any color management. I
> made an image in Firework (.png), opened it in
Photoshop, exported it from
> there as a .gif (with an exact palette) and added the
.gif to my original image
> in Fireworks. I saw no color change at all. When I have
the images open in FW
> and PS at the same time, I don't, visually, see a
difference. When I import my
> .png into Expression, however, the colors in the image
do change, so I
> know that can happen.
>
>
>

HT4436 what are the advantages of shifting from @me and @mac to @icloud?

what are the advantages of shifting from @me and @mac to @icloud?

probably no advantage, just Apple policy.
I do not know are @mac users still have their e-mail addresses valid, however, @me works in parallel with @icloud and there is no difference which one you use. At least for the moment.

I had my Ipod nano 7Gen factory restored. Nano touch is working smooth without any song init but after i have any of the songs shifted from itune touch buttons get messed up. They don't work. Help me in over coming this issue

I had my Ipod nano 7th Gen factory restored. Nano touch works smooth without any song in-it but after i have any of the songs shifted from itunes, touch buttons get messed up. They don't work. Help me in over coming this issue.

Hello Rohantm,
Thank you for the details of the issue you are experiencing with your iPod nano (7th generation) touch screen. I recommend the following steps for the issue you described (you can skip the steps you have already tried):
Touch screen does not accept input
Clean the screen with a microfiber polishing cloth.
Do not wear gloves while using the touchscreen. Do not use the touchscreen with wet hands or immediately after applying hand lotion. Moisture affects touchscreen behavior in the same manner as it affects a trackpad.
If you have a protective plastic sheet or film on the touchscreen, try removing it, because it may be preventing the touchscreen from working properly.
The current application may be unresponsive; try resetting iPod by pressing and holding the Sleep/Wake button and the Home buttons simultaneously for a least six seconds, until the Apple logo appears.
Sync with iTunes and restore the iPod.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
Find the full article here:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Thank you for using Apple Support Communities.
Best,
Sheila M.

I am havig an error while shifting from one tab to the other mozilla firefox stops for some seconds.

error while shifting from one tab to other''''''

I've followed what I can of that error, and from what I'm reading, your hard disk is doomed. Some people report that they've been able to reinstall OSX on the same disk and use it for as long as a few months, but eventually the error returns.
Here's what I suggest:
Step 1: Backup everything you want to keep immediately!
Step 2: Buy new disk.
Step 3: Install new disk.
Step 4: Reinstall everything & restore.
I highly suggest backing up as soon as possible. -- On the first day of this error my MBP would no longer boot. Thankfully, I was able to save most of my stuff using the terminal window available in the installer.
Searching for that error code here & on google returns a fair number of hits so you can read what others have done as well. Some seem to be able to get a new drive from apple if it's still under warranty.
Good luck!

Shift from SD to Security

Similar Messages

Maybe you are looking for