Shift Minimum Plan end date cannot be maintained

We have a situation where we create teams and sub teams to use in shift planning and substitution in portal. While managers create minimum plan for their team/subteams to decide what is the minimum required strength in a team/subteam per shift, it is not allowing us to change the end date once it is created. It says "Can't change start and end date for reguirement XXXX"
Do I need to change any assignment options for this? Or where do I need to tune this for simulating it in R/3 or MSS?

Solved it myself, its an authorization issue since it worked when i gave sap_all to the employee. So we are identifying the right missing role.

Similar Messages

  • Error message "Data cannot be maintained for set type COMM_PR_PUR_1

    Hi
    While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message.  How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
    For curioisity next I selected all such error logs & deleted. It gave me one warning (some inconstinecies error) which I ignored. After that I checked SMQ1 of R3 & SMQ2 of SRM. No log
    But I observed a strange thing. Whatever material codes I am creating it is going straightway to SRM without running R3AS transaction. I checked R3AM1, selected the row and cancelled. But still going without any interferrance. Why ? How shall I stop this.
    Thanks

    Hello,
    >
    BNR wrote:
    > Hi
    > While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message.  How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
    >(...)
    Have a look at OSS note 1049693 - Data cannot be maintained for set type COMM_PR_PUR_1.
    Regards.
    Laurent.

  • Master Data Cannot Be Maintained

    Dear All
    I want to view the Master Data for the standard Object.
    But when i right click the object and click on Maintain Master Data it gives the following error:-
    "Master data cannot be maintained for characteristic 0CRMPROD_ID."
    Please guide me on this.

    Hi Anup Chaudhari ,
    Did u load master data into that Infoobject.
    First load the master data using Infopackage after that you can check the master data by using
    Right click ---> maintain master data.
    Second thing is:
    Is there any lock message if it is check the attribute change run job once.
    Thanks,
    Kiran Manyam

  • Performance Management: Changing plan end date after publishing plan.

    Dear experts,
    I want to change my plan end date after publishing the plan. But there is no update option when i go to HR professional > Performance Management > Performance Management Plans > Query A plan > Update.
    Kindly guide me.

    Change the End Date of Plan and Rebublish the Plan.
    Thanks

  • Foreign trade data cannot be maintained in Billing Cancellation (S1)

    I am trying to release to accounting a S1 document, but I am getting a foreign trade data error.
    I went to maintain the header foreign trader data of the billing cancellation document (S1), but this section is grayed out
    and the system wont allow change.
    Is there any way I can maintain or fix this data, so I do not accumulate junk?
    Any opinions appreciated
    regards
    Hanarin

    Cathy,
    Thanks for the reply.
    To add a bit more information, F1 document is released to accounting.
    Foreign trade data was not maintained, and was able to be released to Accounting (along with CO-PA)
    with no issue. It is just when this document was cancelled via S1 that the system started complaining about Foreign Trade Data.
    Thank you
    Hanarin

  • Project Actual End Date cannot be entered

    project template looks like this
    PROJ DEFN: PROJ-A
    WBS COMPONENTS: PROJ-A-1
    WBS COMPONENTS: PROJ-A-1-A
    WBS COMPONENTS: PROJ-A-1-B
    PROJ-A-1-A & PROJ-A-1-B have actual end dates. But PROJ-A-1 is disabled.
    thanks

    Have you tried checking the log for locked objects? Please ensure whether you are getting this error because of authorization controls implemented in PS.
    Also have you tried using date functions to roll up dates from lower level WBS to the top?
    Regards,
    Syed Ammar Zaheer

  • Billing plan value with reference to start & End date

    Hi Experts,
    Request your earliest support for the achieving the below requirement.
    Scenario:We have Billing plan set up for the all contracts - valid for one year.Monthly rental amount for each contract item is maintained as base price for the contract. When the billing plans starts in the middle of the month then, the billing value need to be calculated only for the relevant no of days in 'settlement' and 'To' date of billing plan. How to achieve this?     
    Net value of the contract item
    Net value of the item   102.00  GBP     
    Tax  for the item         15.30          
    Net value of billing plan for the contract item                                                                                .
    Item Net value  408.00                GBP                                                         
    Billing plan and contract validity details for contract item                                                                               
    Billing Plan Type - PM- Monthly in Advance                                    51- Monthly on First of                                                   
      Contract Start date       07/15/2009 (02)-Contract Start Date        Billing plan Dates from  07/16/2009  02                                    
      Contract plan End date 10/14/2009 (09)-Contract End Date          Billing plan Dates until 10/14/2009 09                                    
      Horizon -                                                                                Cal-Id - 01                                                                               
    Dates                                                                               
    Settlement       To                      Billing date         Bill.value    Crcy  Block  BillSt  Man.  Cor  PayT  DCat  Billing Ty  Price cal           
       07/16/2009      07/31/2009        08/01/2009         102.00       GBP   FA     A                                   01      ZC           01 -
    > This needs to calculated upon net value for 16 days only   
       08/01/2009      08/31/2009    09/01/2009              102.00       GBP   FA      A                                 01      ZC            01--->           between 07/16/2009 to 07/31/2009=102/31*16 = 52.65
       09/01/2009      09/30/2009   10/01/2009               102.00       GBP   FA      A                               01      ZC            01                  
       10/01/2009      10/14/2009    11/01/2009              102.00       GBP   FA      A                               01      ZC            01                                                                               
    Please suggest if this can be achieved through Billing plan configuration or any user exit that can be used to resolve the issue.
    Thanks,
    Priyabrata

    as far as I know there is NO such standard report.
    you would try to build sap query based on VBAK/VBAP using VBFA checking LIKP/LIPS and VBRK/VBRP...
    but you may request abaper for more professional report with MKPF/MSEG and BKPF/BSEG

  • Change End date of billing plan/invoice plan in sales order item(fpla-erdat

    Hi Experts,
    Could you please help to me regarding this issue.
    I need to change  End date of billing plan/invoice plan  in sales order item  of  "billing plan" Tab.( FPLA-ERDAT) for all line items. It is not a one sales order,more than 1000 sales orders.
    How can i change those end date of billing plan for all line litems and all sales orders ( i have input file with sales orders, items, dates.)
    Thanks
    jaya

    Hi ramki,
    I tried with using  MASS  T.code ( bus2032 Object type).
    There are no field  related to Billing plan end date?.if case i done wrong ,tell me what are steps while using MASS T.code.
    now what i can do. or explain
    Thanks
    jaya

  • Updating service contract line item's end date

    Hi,
    I am trying to extend the end date on a line item in a service contract via the DI and it is giving me the following error:  'Item's end date cannot be greater than contract's end date' and I don't understand why.
    I retrieve the service contract object, change the header end date then find the line item  I need, update it with the same end date and then issue call the SC update method.  Here's my code:
        Try
                 SC.Lines.SetCurrentLine(SerialNbrLineNumber)
                 NewStartDate = LineEndDate
                 'calculate new end date & extend service contract
                 NewEndDate = NewStartDate.AddYears(Warranty_Duration)
                'never make the contract end date earlier than it had been
                SC.EndDate = IIf(NewEndDate > SC.EndDate, _
                                                             NewEndDate, _
                                                             SC.EndDate)
                'update service contract detail with new end date
                 If NewEndDate > LineEndDate Then
                     SC.Lines.EndDate = NewEndDate
                 End If
                 If SC.Update() <> 0 Then
                    rs.RtnCode = -1
                    rs.RtnMessage = B1Comp.GetLastErrorDescription()
                 End If
    I did see something in the di help that mentions that B1 calcs an end date based on the "duration of coverage" field but I don't think I could use that because I might only change the end date for one line item. 
    BTW I can do this in the application with no problem.
    Thanks in advance for any assistance.

    Known B1 bug.  Should have checked support first.  More info on note # 1026540

  • End date different in timesheet from plan

    Hello All,
    We have a work plan that has fixed duration tasks that run from 11/18/2013 to 12/20/2013. The task is assigned to several resources and the planned work looks fine in the work plan. However, the start/end dates have shifted in some (not all) of the resources'
    timesheets to roughly a month later. none of the timesheets have been submitted so Im trying to "reset" them so that the planned work is the same as the work plan. Deleting and recreating the timesheet doesnt help.
    Can anyone suggest a method to resync the planned work from the work plan to the timesheet.
    We are using Project Server Sp1 + Dec 2013 CU
    Thanks,
    Shane
    Shane O'Hanlon (Accenture)

    Hi Shane,
    open your project in Project client and apply a usage view. Add column start. I assume, that dates are changed there. If %Complete = 0, yo can just reset start date on assignment level to start date of task. If %Complete is more than 0 or you have an ACtual
    start date for this assignment, it may be not good idea to reset, since your resource may already have time reported to this assignment.
    What do you see in usage view. Is it in sync with what you see in timesheet?
    Barbara
    To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find an
    appropriate solution faster.
    Thanks for your support!

  • Plan Enrollment Coverage End date

    There is a plan , which has following Enrollment coverage Start date and Coverage end date code resp. ( in Plan enrollment requirements)
    Enterable and 1 Day Before Event.
    The plan needs to be explicitly enrolled to thru ESS.
    There is a reqmt such that when employee enters end date it should be such that only sysdate or later date should be allowed to be entered. So we may need to change the above setup.This has to be acheived in configuration only.
    Kindly help.
    Thanks,
    Sush
    Edited by: user10714306 on Aug 14, 2009 6:02 AM

    Hi,
    To drop the plan off employees, you have to process life event for them. If it's part of the annual process, then the enrollments will drop when the open enrollment is processed. Alternately, you will have to process an "Admin" life event for these employees.
    If you are using unrestricted processing, then use admin or open to achieve the same.
    IF the changes are just in dev environment, I suggest removing the plan year periods from the plan instead of making it inactive. processing life events is still necessary. Plans made inactive cannot be reverted back and so, should be done as a last resort.
    Regards,
    Vinayaka

  • My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    Hi,
    To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
    Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
    Give the datasource name, then the database name.
    You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
    There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
    It will be like this <service name> <portnumber>/tcp
    Hope this helps...
    best wishes,
    Nish

  • SNP Planned order start and end dates are not calculated correctly

    Hello SNP Guru's
    The SNP planned orders generated after the Heuristics run, have a start and end date based on the Activity Duration (Fixed), while the resource consumption is based on the Bucket Consumption (Variable), which is correct.
    The Activity Duration (Fixed) is based on the BOM Base Quantity. So if the Activity Duration = 1 day, and if the order quantity is more than a day, the start and end dates, still shows as 1 day. So no matter what is the order quantity, the start and end dates is always = 1 day.
    Does anyone have any experience in implementing any code to change the start and end dates on SNP Planned Order?
    Seems like it should work as standard.
    Am i missing something?
    Thanks,
    Mangesh

    Dear Mangesh,
    SNP is a infinite planning tool. If you have defined fixed duration to be 1 DAY in the activity, no matter how many quantity you input for your planned order, the order will last for one day. If the resourced is overloaded, you then run capacity levelling to
    banlance the capacity. What your expected beahavior happens in PPDS planning.
    Claire

  • Change End date of billing plan/invoice plan in sales order item

    Hi Experts,
    Tell me what are tables to be updated,when i changed end date of billing plan/invoice plan ( "billing plan" Tab in sales order item).?
    Thanks
    jaya

    vbrk and vbrp

  • Why the delivery date is the same date as 'transptn plan date" & loading date' & ' good issue' & GR end date'

    Hi Experts,
    why the delivery date is the same date as ‘transptn plan date” & loading date’ & ‘ good issue’ & GR end date’.
    in shipping tab i can see Planned Deliv. Time  170 Days ... wat could be the reason.
    Many Thanks:
    Raj Kashyap

    Hi Jurgen,,
    Thanks for quick reply!!
    But i didnot find any things like that .. what could be the customizing .. and we are using GATP from APO side.
    \Raj Kashyap

Maybe you are looking for

  • Cannot Print PDF Large volume PDF.  Internal Error: 8004, 6343724, 8484240, 0

    We are having an issue with printing to PDF for large volume FM files.  PDF appear to work for small/medium volume PDFs however.  Internal Error: 8004, 6343724, 8484240, 0 FrameMaker 8.0.0 for Intel Build: 8.0p273 I've checked the default printer and

  • I fill out a online form and when i hit send firefox resets the page

    When i fill out an online form of some kind and it takes over a certain amount of time firefox will clear all my information and reset the form to all blank responses. I assume it must be firefox and not the website I'm using because it has happened

  • Photosmart Plus B209A

    Hi, I am seeking assistant to install my printer with my PC.  I misplaced the CD and my computer was acting up that we rebooted and now we can't connect the printer. Let me know if you can help? The serial No. [text removed for privacy]

  • Approved RMA but status is Pending

    Hi, I enabled the iStore Return process with Approval. I created one RMA order and Approved by an approver, but the RMA order status still Internal Pending Approval. How to change the order status to Booked at Header level now Internal Pending Approv

  • Kde printing and cups-pdf

    This was working before, but I don't know what changed, nor where to look to find anything. What's happening is that anything printing through KDE's print system (ie Konqueror, Kate, KMail) produces defunct .pdf files when I print to my cups-pdf prin