Shift Timing Change

Dear all,
My client wants to change the shift timings as when there is a change in production plan due to variation in requirement.
Is it advisable to do the same ? Why

Dear Mohan,
please refer the thread-->
Enterprise Asset Management (SAP EAM)
pl try validity date option in work center as mentioned in the thread.
You can create as many grouping with different sets of timings & change the validitiy time whenever you require.

Similar Messages

Flex 3/4 Initialization Timing Changes?

Hi there. This isn't end-of-the-world critical, but I'm trying to better understand what's going on here.
We have a relatively large and complex business app (several hundred classes split into a core application framework plus multiple dynamically-loaded product modules), originally written in Flex 3.2. As part of our new release, we are taking the chance to port it over to Flex 4.5; I've spent the past week doing so. We're continuing to use the Halo theme for the time being, to minimize the initial disruption.
I've pretty much gotten it working, but I'm still trying to understand the key behaviour change that I've observed. A lot of our code is failing at initialization time. I'm still nailing down exactly what's different, but the most obvious bit is that it seems like, in commitProperties(), properties that refer to other objects in the same parent don't exist yet, where they previously did. So I'm getting null pointer exceptions where I wasn't previously.
Similarly, I have a few objects where the property refers to the object itself. They're graphing objects, which have a property that describes how to set up the dataFunction. This property is typically set to one of several functions available on the object. So graph "foo" would set this function to "foo.useDateForY" or some such, using one of these utility functions on the class that says how to set up the graph. This previously worked, but now the property is failing because "foo" is null when it is trying to resolve the property value. This seems likely to be related to the above.
Finally, I've also observed what appear to be differences in the resolution of the lifecycle for non-visible objects. Again, I haven't had time to nail this down precisely, but it feels like I used to get CREATION_COMPLETE in a bunch of cases that aren't getting it any more -- specifically, this seems to be happening for objects that I'm building up before adding them to the visible graph. I build lots of screens upfront when a product is loaded, but don't actually add them into the tab structure until they are invoked. Similarly, we have popups that we want to be populating as we go, long before they are displayed, but I don't seem to be getting CREATION_COMPLETE for them when I used to.
So it seems like something has changed subtly in the UIComponent lifecycle, having to do with the timing of resolving IDs, setting properties to them, and calling commitProperties(); maybe also something having to do with how parenting relates to finishing the lifecycle. Does anybody have a clue what I'm talking about here? And is there a document somewhere that describes the timing changes more clearly? I've seen several documents talking about 3 -> 4 changes, but haven't noticed anything on this particular topic...

Yes, the timing of when child objects are created has changed relative to
when the constructor runs, but the lifecycle methods and events have not
changed. If you rely on commitProperties to resolve things, it should be
ok.
The only cases I've seen where creationComplete doesn't fire is if there is
an invalidation loop going on which is slightly more possible if using
multiline text controls whose height depends on width or vice-versa.

Slideshow timing changes after sending to iDVD--why?

After much work, I finally got my slide show perfectly synchronized to the lyrics of the song being used, then exported to iDVD. I made no adjustment or changes in iDVD other than choosing & customizing the opening menu theme (which is separate from & has no bearing on show). I was horrified to discover that the timing changed, throwing off the image/lyric sync, which is crucial to the "story" of the show.
If all the iLife apps are supposed to be so tightly integrated, why does this happen???

I wonder if you can have iPhoto make the QuickTime movie of your slideshow, and if it would preserve your timings, and would that stick when sending to iDVD.
This sounds like a job for QuickTime Kirk....

Shift timing in Resource

Dear Experts
How we can define 3 shifts in Resource, for Standard Capacity availability
Shift timing 1 > 7:30 to 4:00 2 > 4:00 to 12:30 3> 12:30 to 7:30
Each shift has 30 minutes break except 3rd shift
Break time for 1> 12:00 2> 08:00

Hi Nitin,
You can define the shift sequence in IMG - tcode OP4A
Here first you define the grouping key: EG 99
Then for the grouping key define the work break schedules (by selecting the grouping key & double clicking on work break schedules)ie whats is the break time in shift for eg lunch time,tea time etc
Then again select the grouping key & click on shift definition -here you give you shift timings(in your case three shifts) with breaks which you defined earlier
You define how shifts follow another on a daily basis for the duration of a cycle in a shift sequence. You can use shift definitions.
Hope this is helpful.
Thank you.
Naveen

.swf timing changes when posted to server

I have been using Captivate for years, and have never seen this error before. I currently have Captivate 3. I have a 6 slide file with a mix of PowerPoint imports and captured movies. On the last slide, I have an imported PowerPoint animation where I use the Credits Custom Animation on a text box to scroll a list of report names across the screen. The end effect looks like movie credits.
Here is the issue: The timing of the credits is perfect when I play the published files from my PC. I send it to my network admin, and it plays perfect when she runs it from her PC. But when she uploads it to our Windows 2003 Intranet server, the timing of the movie is off. The credits finish rolling way before they should. So it seems like maybe the file is playing too fast?
Once recent change we made to the server was to add the .flv file type to the Mime directory. I don't know what that means, but I know we weren't able to get .flvs to play until we did this about a month ago. An earlier version of this file had been on the server prior, and we didn't notice an issue. But I had to change the audio and now that we've reposted it, we have this problem.
Also, I upgraded my Vista machine to Windows 7 last week. I only have one problem with Captivate since the upgrade. I can't hear the audio when I play the slide in edit mode. But I do hear the audio when I preview the project. I don't think Windows 7 is causing my current problem with the .swf.
So it stands to reason that one of these recent changes might be the culprit. But I thought it was worth posting here in case any of you have seen this before. Here's hoping!!!
Thanks in advance!
Kelly

I'd like to post a link, but like I said, it's only internal.
When I look at the HTML, it's set to black (background-color:
#000000). Also, when I load it, the page itself is black, but the
background of the Flash *only* has turned white. I can load the
exact same page on my local drive and it comes up black. I've got
publish settings to Flash 8 (my version) and AS 2.0. I checked that
first because I've published lower in the past and had
issues.

Timing changes from iPhoto to iDvd

I made a slideshow in iPhoto5 with precise timing as far as music to photos. On export to iDVD5 to enable burning to a dvd, the timing has changed. It's just a little 'off.' Is there a workaround?
Mac OS X (10.4.4)

Robin:
If you export your iPhoto slideshow w/sound as a QT movie and then import it into iMovie you can select the movie in the timeline and use the Advanced->Extract menu option. That will extract the audio and put it in the audio track below the video track. Then adjust as necessary and close your iMovie project.
Next open the iMovie project package, Control-click on the file and select "Show package contents" in the Contextual menu. Navigate down in the package to the Shared Movies/iDVD folder. Select the movie file in there and drag into your open iDVD menu window, avoiding any drop zones that may be there.
That should give you a properly times slideshow.

Monitory does not power up after memory timing changed

(See my sig for spects) I tried changing memory timings to 2-3-3-6. The last thing I tried was mem volt from 2.55 to 2.75 and the TI/T2 Memory timing to T1
I hit save and exit and the computer seem to start but no graphics?. ??? SO I had to flip th PSU switch and when I flipped it back (20 seconds later) the computer seemed to start but still no graphics? I never hit the front power button either?!
I had tweaked some of the other values with no problem earlier today. (tras, CAS delay ect).
One other note: I have had to turn off the computer with the PSU switch since 1.4? BIOS flash I did last year. I read something about RAID Firmware version ? (1 year ago) that came with that BIOS causing hangs ect.
I may use this as an excuse to buy Vista today and start from scratch although I really don't want too.

OK. I reset the CMOS and windows loaded ok but now my RAID +1 array is gone. I see addition HD letters in My Computer now. When I entered bios and change it to NVraid I got a windows error saying it could not load because of missing or corrupt file? I tried a repair but it said it did not work.
I do see the healthy raid array when the system Posts. I did not click the restore optimal defaults yet. Maybe I will have to do that now.

Odd color shifts when changing displays

Ever since I upgraded from Snow Leopard to Lion, I've experienced some weird problems with colors appearing not right when I disconnect my MBP in closed-clamshell mode from a 27" LED Cinema Display and simply use it with its built-in display (1600 x 1050), or later connect it to a 1024 x 768 LCD projector. In many cases, it suffices to go into the Displays preference pane and change the color sync profile to something else and then back, but not always. The color shifts look like this:
or much worse:
Is this a bug in Lion, or something else? Is there a workaround or fix? The only true fix I've found is a restart.

OK, more on this oddity: why do I have so many identically-named colorsync profiles?

Color Shift when Changing view mode

Hi,
I'm using a dual monitor setup and CS5 64bit on Windows 7. I have all my images on one monitor and all my palettes on the other. When I press f to switch the screen mode from tabbed image windows to fullscreen, the colors shift horribly to much darker, redder colors.

I can only assure you that this doesn't happen on every system.
Did you try changing OpenGL to Basic mode, as I suggested?
Is the image in Lab mode (not RGB)? I recall some reports very early after the release of Photoshop CS5 that Lab mode images were being displayed differently under different circumstances.
-Noel

To determine shift timing based on a time stamp field

Hi all,
I have an issue with a determing shift timings.
I have a time stamp field QALS-ENTSTEZEIT which has a value like 17:22:29.
Now based on this I have to determine the shifts.
There will be 3 shifts.
shift 1 between 08:00:00 to 16:00:00
shift 2 between 16:00:00 to 00:00:00
shift 3 between 00:00:00 to 08:00:00.
Now the issue is :this statement,
QALS-ENTSTEZEIT BETWEEN '00:00:01' AND '08:00:00'.
do not triggered.
Please suggest some solution.
Thanks and Regards
Nazmul

Hi,
Try the below code, it may solve your problem.
Data : V_TIME type QALS-ENTSTEZEIT, shift.
Ranges : R_T1 for QALS-ENTSTEZEIT , R_T2 for QALS-ENTSTEZEIT, R_T3 for QALS-ENTSTEZEIT.
R_T1-SIGN = 'I'.
R_T1-option = 'BT'.
R_T1-LOW = '080000'.
R_T1-HIGH = '160000'.
APPEND R_T1.
R_T2-SIGN = 'I'.
R_T2-option = 'BT'.
R_T2-LOW = '160000'.
R_T2-HIGH = '235959'. " Change like this, its not much difference from 000001 but seems to be working
APPEND R_T2.
R_T3-SIGN = 'I'.
R_T3-option = 'BT'.
R_T3-LOW = '000001'.
R_T3-HIGH = '080000'.
APPEND R_T3.
V_TIME = '172259'. " u can assign QALS-ENTSTEZEIT directly to v_time
*CONCATENATE V_TIME+0(2) ':' V_TIME+2(2) ':' V_TIME+4(2) INTO V_TIME. "no need for this
IF V_TIME IN R_T1.
SHIFT = '1'.
ELSEIF V_TIME IN R_T2 .
SHIFT = '2'.
ELSEIF V_TIME IN R_T3.
SHIFT = '3'.
ENDIF.
Check and revert back.
Regards
Karthik D

Slideshow Timing - Changing Individual Slide Timing

in iPhoto '11 is there any way to change the timing of an individual slide? I'm preparing a slideshow of pictures for a Thanksgiving service where the pastor wants a text slide every couple minutes with some words he wants the congregation to speak. These slides would need more time than the other picture slides. I've already created the text slides in Photoshop, saved them as JPEGS and inserted them into the right places in the slideshow.

That option is only available for some themes and not others.
Classic
Shatter
Ken Burns
The others themes don't have this feature.
Alternatives to iPhoto's slideshow include:
iMovie, on every Mac sold, as is iDVD.
Others, in order of price:
PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Express $199
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs.
However, there is no doubt that Final Cut Express is the most capable app of them all. You get what you pay for.
Regards
TD

Shift keys change focus

I have a MacBook running OSX10.6. Someone else was using it the other day and now whenever I hit my Shift key, it changes the focus to either the task bar or the other open app(s). I have reset the keyboard settings in System Preferences, tried another keyboard and still have the same issue. I created a new user account and the Shift key functions properly in the new profile. Any ideas where else to look to restore the normal behavior?
Thanks!

I'm having the exact same problem.
using a mac mini, OS X 10.7.4 and wireless keyboard.

Shift + 3 changed to the wrong symbol

Shift + 3 is supposed to be the hex or pound sign. But some reason it changed all of a sudden to this: £ (oddly enough, it's the British pound sign). Not sure what I did.
I know changing the keys is supposed to be easy, but I can't seem to find it in Mac Help anywhere.
Can anyone help?
ibook G4 Mac OS X (10.3.9)

You're Welcome kimbap!
I'm happy that I could help solve your problem!
Also, I notice that you have marked your question as answered, but have not utilized the Helpful or Solved options. That may be intentional, but, if you are not aware of the benefits, of using that function, here is some information.
When you mark the appropriate posts as Helpful (5 pts) 2 available, or Solved (10 pts) 1 available, you are Thanking the contributors, by awarding them points.
In threads with multiple replies, it also alerts other readers, to which answers may have been helpful, or solved the issue.
This info, and more, can be viewed by clicking on
? Help & Terms of Use, located under your login name, on all "Discussions" pages.
Specifically What are question answers?.
The Helpful and Solved buttons, that award points, are to the left of the Reply button in each response.
These are not the same as these Which do not award points, as explained Here.
Thank You, for extending the courtesy, of awarding stars in Discussions, as this is not a requirement, nor mandatory.
ali b

Caption Timing Change Issue

Hi all,
I'm using Cap build 3.0.0 / 580. I see the lively discussion
regarding the bold bug in captions. I too am a victim.
In addition, each time I edit a caption, whether by opening
it or by changing its size using the caption handles, it reverts to
3 second default timing. It's making me insane!
Is this related to the current bug discussions or something
else yet again? Couldn't find anything specific to this behavior.
Thanks for the sanity check,
Robbin

Hi Robbin
Have you double-checked the setting for Project >
Calculate Caption Timing?
Assuming that's not it, you should seriously consider
reporting the behavior to Adobe.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

Using my macbook alternately with cinema display and without makes all my screens shift and change in size ?!

After I disconnect from the cinema display and than a few minutes later open up the macbook without the display connected, things are fine. But re-connecting to the display, all the screens are moved and/or changed in size. Anybody any ideas ?

I'm currently sitting in my office using my MBP and looking at a 24" Samsung display. At home I replaced my 4 year old iMac with a 2 year old 13" MBP which is connected to a similar display. That should be tell you all you need to know!

Shift Timing Change

Similar Messages

Maybe you are looking for