Shift wise activity plan

Hi
Can any body tell me how to do necking in PS like Primivera scheduling.
i mean activity is completed in two or more shifts and in this shift some other activity is proferming.
i want to plan shifts wise activities.
please can any body guide me
thanks

Can you elaborate the solution. because in factory calander working time is not mentioned.
for example I have two activities which have 24 hours. one is completed in two days because the working hour is 8 am to 6 pm. And other is completed in one days because its working time is 24hours.
how to cater this.

Similar Messages

Shift wise planning and scheduling

Dear All,
Here we have a scenario in which we have to do shift wise planning and scheduling.
The shift is not fixed.
It can be 1 shift on particular day and it might be 2 shifts another day. They will plan for this many hours per day for future.
The scheduling should be done for this many hours which inturn is as many shifts. The working hours per day is not fixed as well. It totally depends on the requirement. So the planning and scheduling should happen based on hour basis and will be different for each day. I need your inputs for mapping this scenario.

Balaji,
You have not given any meaningful requirements, therefore it is impossible for me to make suggestions. What you have said so far implies total randomness. If all the events are random, there is no planning, only tracking.
Exactly what do you mean when you say 'planning'? Material planning in ERP does not consider shift sequences/timings/schedules. Capacity planning, where work schedules are managed, does consider shift type data, but only takes place only after the orders have been established.
Scheduling is done based on Work Centers. A work center can represent one or more machines, one or more people, or a combination of the two. Work centers can have shifts. The number of shifts can vary over time. The shifts can have various working schedules. The shift working schedules can vary over time.
I suggest that you describe a single specific scenario you would like to discuss. Perhaps then the forum can offer some suggestions.
Best Regards,
DB49

Diff: Version on workflow builder and Maintain Active Plan version on SWU3

Group,
Can any one help me to understand the Version on workflow builder and Maintain Active Plan version on SWU3
Thanks in advance !
Richard A

Dear Richard Antony,
The Versioning in the Workflow is very important its some what simmilar to the version on any SAP Objets like Tables, Program etc.
Here Suppose any change comes in working workflow, then in stead of directly change them you can create a version of them and them modify it. So that you can reverst back to that version if required.
Like wise there is lots of importance of versioning Workflow.
The Active Plan version is also important to establish at SWU3. As all the Workflow is using Organization management which is very depended on the Active Plan version. so based on which Plan version you want to use you can Provide in SWU3 to tell Workflow system to use this.
Hope this will give you a clear picture.
Regards,
Chandrashekhar.

Daily Shift wise Report, Dash board reports

Dear all
With refering to the present project in 4.7 version the customer requirement is below.
1. Shift wise maintenance report - Here they are presently maintaining Section, shift, Date, From time, To time , Job descriptions, attenede by remarks.
In another coloum in same sheet they needs
From time, To time , Delay descriptions, attenede by remarks.
Then thirs is communication for next shift- there they are writing the texts which they are saying to next shift guys.
2. Another what they wants is regularly top managers wants to see the maintenance details ( prev order, down time, consumption cost etc ) in their system dash board(screen) . they are not willing to go sap. How to do this thro .Net or workflow . This is report should be fulfiiled by us.
3 Shutdown Planning report- here they are maintaining the date wise job hours in graphical form. How we can activate this
I request you please have some idea about this.

Dear Nandip/Iftikar,
Dear thanks 4 ur answers. I have asked the same with our abapers , but they are new and not able to help. i have well tried with notification customer table addition in spro. but its not helping as required.
The thing is i cant prepare the specs for this report. Example for shift we can create Z table. But Processing job description, Action taken, delay reasons how i can prepare the specs.
I request you to share your Program or specs please then its better for us. please send at thennarasu_kandasami@ welspun.com
Edited by: thenna arasu on Jun 2, 2008 2:12 PM

Shift wise process order confirmation

Hi Guru's
My client is asking about shift wise confirmation of process order.
wht r the step will I follow to maintian the desire requirement.
Please explain with example upto order confirmation, wht r the field to be check & wht should be the input I give the field.
If any body sent me the doc related to the problem
I'll be thankful to him.
My ID:- [email protected]
Parminder

Parminder,
Basically your shift definition is for capacity planning/scheduling in the desired way
Create a process order ,Hope you would have also maintained your recipe with timings
"<b>wheer the impact will be come of this configuration.either Process order creation or order confirmation</b> "
The proces order will be scheduled(<b>at the time of order creation</b>) as per the timings mentioned in the recipe & the shift definition in the resource
Then you do phase wise confirmation-Time ticket/Time event
As per your reply what i understand is that in 3 shifts your process order will get over
So your shift supervisor will confirm accordingly
Hope this is useful
Revert back if you have any further queries
Reward points if useful
Regards,
SVP
Message was edited by:
SVP

Shift wise WSR in a Negative TM system

Hi all,
We have to maintain IT0007, (Planned working time) of an employee for Payroll purposes. But in a negative TM system what is the benefit of maintaining different work schedule rules for different employees based on shift system.
Actually my problem is client is not able to give me a monthly shift wise work schedule rule, they say that it is decided manually and there are a number of alterations and modifications in that....so they can't give it in a concrete manner.
Please clarify my doubt and suggest me how data should be taken and in which form it should be inserted in system.
Regards,
Tomesh

Tomesh
Option 1
You may explore if shift substitutions on a day by day basis through time managers workplace can be used for these employees.
Option 2
Alternatively, if rostering is performed on another non SAP system, you may need to have these rosters interfaced into SAP for upload into substitutions infotype (IT2003)
If Option 2 is pursued, you will need to set up "dummy" work schedules for these employees.
Thanks,
Gregg

"no active plan version exists" while adding system in partner profile

Hi,
i am getting "no active plan version exists" while adding logical system in partner profile. while duble click on this it showing "set active plan version".
Can anyone answer me how to do the set active plan version. I asked my functional team and they didnt know how to set it.
Thanks,
Gowthaman.

Thanks Sonia,
in OOAP i could not able to edit so i maintained plan version in OOPV and in sm30 in table T77S0 maintained PLOGI group.
Now i am getting different error while creating partner profile in we20..
*Object type US, ID CENTRALADMIN unknown (please observe upper/lower case)*
    *Message no. E0624*
*Diagnosis*
    *Object CENTRALADMIN of type US is not known in the system.*
*Procedure*
    *Enter a valid object and check the type.*
    *Make sure upper case and lower case are used correctly.*

Report on power generation from each plant and shift wise(PP report)

Hi,
i got one Functional spec on pp module. this FS main object is calculate the daily smelter performance.
Based on this FS I will make a report on POWER GENERATION FROM EACH PLANT AND SHIFT WISE.
so please can anyone of you advice to me , is there any standard extractors and standard cubes or ods are there for make this report.
Regads,
Suresh.

Hi,
here i mentioned tables,fields and logic according to Fspec.
S.no          Report Field                                      SAP Table-field                                        Logic
   1               Shift                                              AFRU - KAPTPROG
    2              Unit                                                MKPF-VERID                                      Pass MATNR and VERID to AFPO and fetch AUFNR for all VERID and pass AUFNR to AFRU and fetch KAPTPROG and GMNGA for that particular BUDAT
3.            Total Generation                                    -                                         ADD all the unit GMNGA for Individual KAPTPROG
4.           Total Auxiliary Consumption                   -                                          Pass MATNR and AUFNR to MSEG and fetch the MBLNR and MJAHR. Check MSEG - MBLNR and MSEG u2013 MJAHR = MKPF - MBLNR and MKPF u2013 MJAHR
and fetch BUDAT for that particular date and pass it those MBLNR and MJAHR to MSEG and check for movement type 201 and fetch MENGE.
5.            Export to GRIDCO                               -                                            Pass MATNR and AUFNR to MSEG and fetch the MBLNR and MJAHR. Check MSEG - MBLNR and MSEG u2013 MJAHR = MKPF - MBLNR and MKPF u2013 MJAHR
and fetch BUDAT for that particular date and pass it those MBLNR and MJAHR to MSEG and check for movement type 261 and check for Field SHKZG if H fetch MENGE.
6.          Import to GRIDCO                               -                                                Pass MATNR and AUFNR to MSEG and fetch the MBLNR and MJAHR. Check MSEG - MBLNR and MSEG u2013 MJAHR = MKPF - MBLNR and MKPF u2013 MJAHR
and fetch BUDAT for that particular date and pass it those MBLNR and MJAHR to MSEG and check for movement type 101 and check for Field EBELN and fetch the MENGE.
7.        Smelter Consumption                                -                                            Pass MATNR and AUFNR to MSEG and fetch the MBLNR and MJAHR. Check MSEG - MBLNR and MSEG u2013 MJAHR = MKPF - MBLNR and MKPF u2013 MJAHR
and fetch BUDAT for that particular date and pass it those MBLNR and MJAHR to MSEG and check for movement type 201 and check for Field WERKS 1400 and display MENGE.
8.       Net Export / Import (MW)                                   -                                      Difference between Export to GRIDCO and Import to GRIDCO
Based on these information ,can please anyone advice to me, is there any standard extractors ,cubes and ods for make this report.
Thanks,
Suresh.

How to get active plan version dynamically

Hi all,
I am making some HR reports in which I am pulling up position long text from hrp1001 by giving condition - where plavr = '01' . Now if the active plan version is not 01, my condition becomes vague.
Please let me know how to determine the active plan version dynamically in my sample code below
SELECT APERNR AOTYPE B~STEXT INTO CORRESPONDING FIELDS OF TABLE ITAB_EMP_DEATILS3 FROM PA0001 AS A
INNER JOIN HRP1000 AS B ON BOTYPE = AOTYPE AND BOBJID = APLANS WHERE ( BOTYPE = 'S' AND BPLVAR = '01' AND AENDDA = '99991231' AND BENDDA = '99991231') AND A~PERNR IN PNPPERNR.
SORT ITAB_EMP_DEATILS3 BY PERNR.
DELETE ADJACENT DUPLICATES FROM ITAB_EMP_DEATILS3.

Simply call FM RH_GET_PLVAR

Report to show shift wise activities for particular product

Hi, Is there any report exists to show shift wise activities carried on particular product, basically time taken,man/machine utilization,in-process rejection,machine break down etc.? how to generate the same.

Dear Yadav,
This report is something called as workcenter's performance report or as plant performance report.
In standard SAP again CO28 or COOIS or MCP7 or MCPH can be used.
But still in your case only a customized report can fulfill your requirement.
check and revert back.
Regards
Mangalraj.S

Shift wise confirmation and shift wise production report

Hi Guys
To get shift wise production confirmation and reports, I have maintained the following setting ,
1- maintained shift sequence and with shift grouping,
2- assigned the shift grouping to work centers,
other theses settings, what other setting to be done for shift wise confirmations and also production reports,
thanks in advance,
mohan.m

Hi Mohan,
We had similar requirement for our manufacturing plant.
We have done Z-Development for
1) Shiftwise - Linewise Production
2) Shiftwise - Beltwise Packing
1) for that we have define new control key
2) That key assigned to master recipe.
(Why new control key ?
New control key is defined specifically to generate this report. Because Auto GR is done only at the end of packing and not at the end of shift. But we want report for each shift. That's why after each shift end proposonatly that much qty is confirmed by new control key. However actual Goods receipt is only happened while completing total manufacutring or packing)
3) That control kept as base of Z-development.
4) As far as shift timings are concerned, we have taken actual shift timings of our manufacturing plant.
Hope this will help to resolve your problem.

Shift wise production report

hi Exprts,
Process:
I shift starts at 6.00 am and ends at 14.00 hrs
II shift starts at 14.00 hrs and ends at 22.00 hrs
III shift starts at 22.00 hrs and ends at 6.00 am (next day)
3.We confirm the qty in the t.code CO11N
The requirement is : How to take the Shift wise production report? , and also a report which shows consumption of components against production order in a shift.
Regards
Ramesh

Dear Ramesh,
check this link to first post the confirmation shiftwise ,both in CO11N and CO15.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0fa9a04-376a-2c10-c396-86d32ac80614?quicklink=index&overridelayout=true
Further to this you can get the shift wise production report using COOIS.
Regards
S Mangalraj

Activity planning price Table

*Hi experts,
Will u plz tell me when i do KP26 the activity planning price stored in which table or how i put some activity price from fixed to variable which is i wrongly posted ?*
Best Regards,
Debashis

Table for Variable Price

DEPRECIATION RUN SHIFT WISE

1. CLIENT WANTS DEPRECIATION ON SHIFT BASIS
FOR MACHINE A DEPRECIATION IS 10 %
IF SUPPOSE MACHINE A RUNS FOR 3 SHIFTS FOR 10 DAYS IN A POSTING PERIOD
2 SHIFTS FOR NEXT 5 DAYS AND
1 SHIFT FOR NEXT 15 DAYS
HOW TO DEFINE DEPRECIATION TO THE PARTICULAR ASSET. NOTE THAT THE SHIFT AND DAYS ARE NOT UNIFORM BETWEEN PERIODS

Hi,
For calculation of depreciation run shift wise , there are two things has to be maintain in asset master.
1. Shift factor for the asset
2. Variable proportion (this field u will able to find it in dep areas.)
Variable proportion is calculated out of the system.
Variable proportion will be calculated as follows :
(Difference between two dep rates as per shift wise X100)/ lower dep rate.
please reward points if useful

Conversion of LTP Planned orders to Active planned orders

Hi PP Guru's,
I want to convert LTP Planned orders of Multiple Materials to active planned orders. Using MD43 (Interactive planning), I am able to covert only one material LTP Planned orders to active planned orders.
Can any one advise me if there is any way (or) options to convert the Multiple Material's LTP Planned orders to Active planned orders.
Please let me know if required any further information on the issue.
Regards,
Purna

Hi Anil,
Thank you for quick reply.
COHV Transction is meant for mass execution of transactions for Normal Planned order or Process order. I did not find any option to convert LTP Planned order to Normal Planned order in COHV Transaction.
Please advise me the with further details.
regards,
Purna

Shift wise activity plan

Similar Messages

Maybe you are looking for