Shifted screen and wrong resolution
hey
I have SL510 and since couple of days before my screen is not working well.
the problem is that th disply is shifted to the left leaving a 3cm black lince, and also the hight is not align with the monitor.
the resolution is very bad.
we tried to:
1) install latest drivers from inter site
2) update bios
3) boor from windows and Linux live CD
everything is left the same, the weird thing is that is also happening when I enter the bios configuration so it doesn't seem to be a driver issue
please advice if you know about a solution or might know the source of this problem
thank you
Hi, minow
From what you described, I think this is a hardware issue. The question that remains is which piece of hardware could be causing the issue. One form of troubleshooting you can do is to hook up an external monitor and try to display video to that. If the video looks good on the external monitor, then the issue is likely either the LCD cable or the LCD panel itself. If the issue does present itself on the external monitor, then the issue is likely on the systemboard.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.
Similar Messages
-
Captivate 4 - Go back a screen and Wrong answer wont pick up
Captivate 4 is driving me mad !
Got a large course in Cap 4, system training, theres various click area interactions.
If i preview the slides in Captivate or publish it i get the same bug...
I'm asked to click on a button, i click away and get the wrong answer feedback. All fine, i click on the button and i move to the next screen.
If i then click on back to go to the previous slide, if i try to click away to get the wrong answer it never comes up. The hotspot is there so if i click on the button which its over i can go forward. But for some reason the wrong answer feedback never appears a second time.
I've deleted it, added a new one, same as before, just W/A feedback, checked to 'infinite attempts' but it only seems to appear once. If i go back to the page and get the wrong answer nothing !
Got a major deadline coming up soon, dont expect this basic bug to be appearing, never had these problems in Cap 3.
Arrgh. Any ideas ?Not sure that I can help on this, but I have a general clue.
In general, you must go forward to go backward when scoring. The <BACK button is not what I am referring to. Try an interim slide that is AFTER your scored interaction. It might provide a message like: Thank you for trying, but your answer was not correct on the first try. Click Continue to review that concept again... CONTINUE
The Continue button is the link back with the GoTo feature of the button.
You can also GoTo slides before the interaction to prep them.
I am not sure about this for interactions (it is true for Quizzes)... Use Must take Quiz to Continue should be enabled for Quizzes in the global settings.
Hope this helps
Joe C. -
When i open facebook and only text shows and all is to the left and when i open hotmail nothing shows on my screen and other webpages have problems also when click at a link all the text comes up also to the left in my screen whats wrong ???
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Websites_look_wrong
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows) -
Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?
Everytime this happens Ihave to power down and restart! Any ideas would be appreciated!
-
PLEASE PLEASE READ THIS I'M IN NEED OF URGENT HELP. || Heeey everyone! I'm new here. Please don't bite me. =))
Okay. So I have a Macbook Pro, 13 inch (bought Dec. 2010). It's currently running on Snow Leopard (10.6.8). It had a hard drive crash in Feb. 2012...I had it replaced and lost all my files . It had two major falls (January 2011 & November 2012). Oh, and it also makes this weird grinding noise when you listen closely.
Everything was going fine, until last week, I encountered a kernel panic. Restarted, but was faced with that awkward blank white screen thing at start up. I was told at the Apple Store back when my hard drive crashed in Feb. 2012 that repeated pressing down of the power button can be damaging, so I waited for it to run out of battery to restart. After that, it was normal again. I downloaded OnyX and verified/repaired permissions...nothing was out of the ordinary.
THEN. The next day, in the middle of use, my mac suddenly black-screened. Not a lot of windows were open, and I wasn't doing anything that...will put a strain on anything. It wasn't total pitch-black like the screen looks like when it's turned off. I could still hear the hard drive working and making that grinding sound. I pressed the caps-lock key, and it didn't light up. =))) What, is it off or something? But I can still hear the hard drive there. And it's totally unresponsive. So I decided to restart by pressing down the power button. It was normal again...until a few hours later when it suddenly white-screened. OKAY it's white now. I don't know what that's supposed to mean. But it had the same symptoms as the black-screen. Unresponsive, caps-lock didn't light up, normal grinding sound as if the computer was still on. So I let it run out of battery so I could restart. Upon restarting, I opened Disk Utility and verified disk permissions. There was no damage, nothing again.
I recently got uTorrent (around late December), and thought that it might have been that, so I deleted it and emptied trash. The next day, it did the black screen again. Same with the next day. There's at least one per day. It didn't seem to affect performance at all, everything still ran smoothly. I made sure to check disk permissions to see if everything was okay. And everything was.
Then, about three days passed without any black/white screen and I thought that nuisance was over. BUT NO. Two days ago, I got black-white-white screened and I was...shocked. I let it run out of battery again. =))) Checked Disk Utility, again, nothing. So I decided to get that Software Update thingo that always pops up. I upgraded to 10.6.8. A day passed without the dreaded black/white screens. But yesterday, it white screened once. And today, it white screened again.
I really can't figure out a concrete pattern. It seems random. But what I do know is that:
1. It happens in the afternoon. All the time, consistently in the afternoon. LOOOL IDK what this is supposed to mean, but its one of the common factors. =))
2. Most of the time, it happens when I leave the computer for about 30 seconds - 1 minute to get something. Or if I'm watching a long video (like a TV show episode), a period of time where I don't touch the mouse/press any keys. Is that related somehow?
3. I can't do anything to get it out of the white/black screen except restart. Each time I restart, I check Disk Utility and nothing is wrong.
And yes, I've went to the Apple Store to get this checked. All they said is: "Upgrade to Lion, maybe the error will disappear. If it does, then it was just a software error. If it doesn't...then sorry." LOOOOOOL NOT FALLING FOR THAT, not spending money when I'm not sure it'll fix the error. I want concrete answers.
I'm a student, and my Christmas Break will be over in less than a week. SO I NEED ALL THE HELP IN THE WORLD PLEASE. What is wrong with my laptop? Can I fix this? Will opening it in safe mode help in any way? PLEASE I'M DESPERATE.Try these:
See what's loading in your login items. - delete the ones you don't need.
Open up Activity Monitor and under all processes, see what's using most of your cpu's resources. Highlight the ones using the most % CPU and hit quit process.
Next, open up disk utility and verify your disk. Once that's done, verify disk permissions - repair if needed.
Restart your Macbook and see if it speeds things up for you.
good luck.... -
Anyone know which render format I should use, my film will be used on a video wall (12 screens) and I need super quality. My footage format is 1080p HD resolution 1920x1080. I will be running the project from a mac with a direct line to video wall. Thanks in advance.
I do some VJ-type work, involving playback of QuickTime files from the computer to projections, and I get good results using ProRes 422. That's convenient, because ProRes 422 is such a great editing codec, too.
Traditionally, VJs use PhotoJPEG codec, which also works well, but it's a bad editing codec. So you would have to export an edited master, then convert.
If you want it to look as good as possible, definitely schedule some time to test the footage on the wall. You may want to change the color correction of your footage to match the projectors. And if you feed the video wall some flat gray, you can see if any of the projectors need to be adjusted.
I'm not sure what application you're using for playback, but QuickTime Player 7 works well. It has an option to play fullscreen on an external monitor (View > Present Movie…). -
Now it just brings up a blue screen and it won't
Let me do anything eles. What's wrong with it. This is the second time it's done it todayI am experiencing the same thing on log out, not all the time but too often. I can get going again by shutting down with the power button, waiting 10 sec. then pressing the power button to boot up again. I have run Disk Utilities, Techtool Deluxe and Disk Warrior which all indicate everything is OK. So I am hoping someone will be able to help us with this issue.
-
White screen on boot, wrong resolution in dual-display mode
Hello,
I recently installed the software driver for a Brother HL-2040 laser printer on my 12 in. iBook G4. I was prompted to reboot, which I did. When my computer restarted, only a gray-white screen appeared.
It seems that the LCD is out of phase or something similar. Some garbled content displays in the right third of the screen, top to bottom, but it is almost the same value of gray-white as the rest of the screen, nothing discernable.
Interestingly, when I attach my iBook to an external CRT monitor (Dell P991), my iBook LCD displays correctly at 800x600 resolution (as well as the mirror on the CRT monitor).
When I open the Display panel from sysprefs, it shows 800x600@85 for the CRT and 1024x768@60 for the LCD. If I try to change the LCD settings, I encounter an out of phase display on the LCD (sometimes tiled display of my desktop, sometimes gray-white screen, depending on resolution and refresh rate).
If I disconnect the external monitor cable, the laptop screen returns to the gray-white screen.
I have reset the PRAM & NVRAM following Apple's documentation. The first time I did this, there was no change in the display. The second time, I encountered the spinning gear during start-up, which was immediately followed by the gray-white screen.
I have repaired the disk permissions and verified the disk via the Disk Utility.
Does anyone know how to correct this issue?
If you have any questions for me or need more detail, please let me know.
Thanks for the help.Here's an update:
I tried installing the most recent driver from www.brother-usa.com for the HL-2040 laser printer. This did not cause any change.
I tried creating a new user on the computer, but the issue seems to be at the system level as the display problem occurs when I boot-up.
I ran the Apple Hardware test via the OSX 10.4 install CD1. This did not turn up any negative results, however it indicated I had 16MB of VRAM instead of 32MB. Also, it showed the resolution at 800x600 instead of 1024x768.
When I have my external CRT monitor connected and I enter System Preferences > Displays, I encounter two windows. The window for the CRT shows the only two options as 640x480 and 800x600. The Default Display (which I assume is the LCD) shows a variety of resolutions and refresh rates. I select 1024x768@60Hz, which at least shows the screen, however the actual LCD resolution is 800x600.
Does anyone have any ideas of what may be causing this issue at the system (not user) level?
Thanks again! -
When I turn on my iPad the grey 'brightness slider' is in the centre of the screen and I can't get rid of it. I've tried switching on / off 'auto-brightness' in 'settings' but it won't go away. What am I doing wrong? Any advice gratefully received.
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
I cant figure out if i can make my icons larger or not in this program. I have a high resolution screen and the objects are unreadable. Someone help me.
What version of AI? What system?`Older versions simply don't support High-DPI displays and there is no way to change this...
Mylenium -
Programmatically change screen orientation and/or resolution?
We don't have VB.NET available and I was wondering if it is possible to create VBA code that would change:
1) screen orientation (and maybe resolution)
2) on a specific monitor (in a multiple monitor setup; we have two)
The idea would be to put it into an Excel workbook and have the macro autorun then exit.
I see examples for C#.Net but can't find any for VBA. Maybe it's not possible. Your comments are appreciated. Thanks.
Edit: ANY MS Office application can be used as long as it can be used via a shortcut on the desktop and run automatically. "One click and done" is the idea.Hello Doug,
I believe you can use Windows API functions to get the job done.
Anyway, the current forum is for Office Apps. I'd recommend asking VBA questions on the
General Office Development forum instead. -
Programmatically change screen orientation and/or resolution using VBA?
We don't have VB.NET available and I was wondering if it is possible to create VBA code that would change:
1) screen orientation (and maybe resolution)
2) on a specific monitor (in a multiple monitor setup; we have two)
The idea would be to put it into an Excel workbook and have the macro autorun then exit.
I see examples for C#.Net but can't find any for VBA. Maybe it's not possible. Your comments are appreciated. Thanks.
Note: ANY MS Office application can be used as long as it can be used via a shortcut on the desktop and run
automatically. "One click and done" is the idea.Hi Dougmeister,
I agree with Cindy that the VBA doesn't have function to achieve the goal. Also there is no function in Excel object for this requirement.
The way we can achieve the goal is that using Windows API as Cindy motioned. And here is an helpful article talking about this topic:
Office Talk: Working with VBA in the 32-bit and 64-bit Versions of Office 2010
And about Windows API issue, I would suggest that you get more effective response from
General Windows Desktop Development Issues forum.
Hope it is helpful.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help!
Hi ..
Shift key boots into Safe Mode, not Recovery.
This only works on a Mac running v10.7 Lion or later.
Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities to repair the startup disk and restore OS X using OS X Recovery
If you can't boot into Recovery Mode, help here > Mac OS X: Gray screen appears during startup -
Hi, I have a MacBook Pro. It is plugged in and charging but will not switch on. I try pushing ctrl, shift, alt and power together then release and press power again. The laptop goes to a white screen but switches off straight away. Any ideas?
P.s. it is now going to apple logo on white screen then switches off
-
i did some thing wrong that makes my mac just showing a black screen and amessage says you need to restart your mac .... etc and i wanted to talk to any one from apple and i couldnt get my mac serial number and i could do nothing i turned to some one who formatted the hard desk and i tried to talk to any one from apple but it seems no one care i spent 4 years to be able to buy this mac and i dont know what to do > i will never buy mac again please some one tell me what to do dvd is not working i press on options and nothing happen what showld i do ? through it ? some body tell me what to do or where to go
Just to make certain, you inserted the original installation disk and started the MBP holding down the C key? Did the Optical drive reject the disk or did it just spin? If the former, the lens in the drive may be dirty and needs to be cleaned. If the latter, you will have to take it to an Apple repair facility.
Ciao.
Maybe you are looking for
-
Itunes won't start - I get error message to re install due to missing registers
iTunes won't start - get error meassage to reinstall - did that 9 times still won't start
-
Hi all, Can any one tell me how to clone oracle 9i database. I am new in DBA post plz help me. Or plz give me any document ID in metalink.
-
How to remove hiss from a Live Instrument
I have a lot of hiss in one of my live bass tracks. Is there a way to remove it?
-
Forum problem:Error 310 ERR_TOO_MANY_REDIRECTS ?
Hello all, I'm trying to post something to the forum using the forums.ni.com and I get an error: The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete. T
-
Ejbdoclet transaction.type settings
This is a container managed stateless session bean I have method1 whose transaction.type attribute is Required. This method iterates over a list and calls method2 whose transaction type is RequiresNew. My transaction timeout defined at the applicatio