Shifting the white-balance temperature for a whole collection of photos

Hi All,
I've just stumbled upon this problem and can't find a solution although I'm sure the Lightroom is capable of solving it. Here it is:
I've retouched a whole bunch of photos from a session outside. The retouching meant (among other things) setting the WB selectively for each photo (or group by group), since the sun was setting during the shoot. Everything looks swell on my monitor, however I found out that on other screens the photos are consequently cooler. Yeah, I know I have an issue with monitor calibration and I intend solve it, but before that I'd like to save my work without adjusting the WB again one by one to each photo. So the question is: is it possible to shift the WB temperature for the entire set of photos by a constant value (some 200 K)? This would help enormously. Any suggestions? Appreciate any help. I'm on LR 3.x
Cheers
Luke

You can use the Quick Develop tools in Library - the same technique as this:
http://forums.adobe.com/thread/1137465?tstart=60
With Grid view, changes made in the right side panel are applied to all highlighted thumbnails automatically as incremental changes on top of - not replacing - their current settings.
With Loupe view, even if multiple images appear highlighted in the Filmstrip, changes are applied just to the single selected image you are viewing - unless you have clicked a toggle-switch at lower-right of screen, to switch LR into "Auto Sync" mode.
RP

Similar Messages

  • I don't know what is going on with the White Balance (WB) and LR.  I had no problem before but recently LR started to change the  WB as  it is importing photos.  I checked the color scale for my photos and LR and both are with sRGB.  Now instead of LR cha

    I don't know what is going on with the White Balance (WB) and LR.  I had no problem before but recently LR started to change the  WB as  it is importing photos.  I checked the color scale for my photos and LR and both are with sRGB.  Now instead of LR changing the WB it is giving me a second copy with a new WB.  Your advise is very much needed and appreciated.  Thank you.

    Can you show us a screen capture of this 2nd copy with a new WB in your Lightroom grid? Thanks
    Are these second copy photos by any chance photos that had been previously imported?

  • The Lightroom Manual is Not Clear on Options for the White-Balance Tool

    In the section "Working with image tone and color" the Lightroom manual states:
    Specify a neutral area in the photo
    1. In the Basic panel of the Develop module, click the White Balance Selector tool to select it, or press the W key.
    2. Move the White Balance Selector into an area of the photo that should be a neutral light gray. Avoid spectral highlights or areas that are
    100% white.
    3. Set options in the toolbar as needed.
    Sets the White Balance Selector tool to dismiss automatically after clicking only once in the photo.
    Displays a close-up view and the RGB values of a sampling of pixels under the White Balance Selector.
    Zooms the close-up view in the Loupe...."
    Item 3 is unclear.  I selected the white balance selector, and moved it to an area as instructed,
    but I cannot find any toolbar with the options described. 
    How do I get to this mysterious toolbar??  Everyone seems to think its a simple thing, but I cannot find it and I am not able to set any of the options described!
    While I am sure this is a simple thing, I think that the manual should be much more clear about this description;  what is there now is very inadequate.

    It should be directly underneath the image preview - press the T key if it's not there.

  • How do I get white balance settings for my Olympus cameras in Aperture?

    I have an E-500 and E-510. I was able to figure out from previous posts how to get the white balance listing in the metadata. The information it provides is a 0 or a 1. My sense is that the 0 could represent the auto white balance setting and the 1 any other setting. I have 7 possible settings for white balance on my camera. Is it possible to get specific white balance settings listed in the metadata for my cameras. Thank you for any help.

    I can tell you how to display it; I haven't set out to find out what the numbers mean, although that would be pretty easy to do.
    Select the Metadata Tab. At the pop-up in the top left select "List-Expanded." Then select from the Gear pop-up in the upper right "Edit List-Expanded." A whole set of options will appear, including White Balance. Check the box and it will be added to the List-Expanded.

  • White balance values for NEF file

    Hello
    I'm using Ligthroom 1.2 with nikon raw files (NEF) taken with D80 camera (firmware 1.01).
    The white balance is most of the time set to 5300K on my camera. But in LR, it always shows 4950K, with tint set to -1.
    I know there is some compatibility problems between LR and NEF files, but does anyone know if there is a solution (except of course applying systematically the right temperature in LR during import.)?
    Thanks
    Erwann

    I believe the issue is actually that Nikon encrypts the white balance in NEF files of recent cameras. If you
    google for it you'll find lots of links to all the problems this caused. Adobe and other RAW software developers have had to reengineer the encryption of this value in order to get a reasonable value and in order to not break the DMCA (draconian US anti-piracy law). Apparently, for some cameras the algorithm is not so good. The alternative for Adobe would have been to use Nikon's RAW rendering library, which for obvious reasons will never happen. The only software I am aware of that correctly reads NEF white balance for cameras after the D2X without using Nikon's libraries is dcraw/ufraw, but they can get away with cracking the encryption. This really is one of the dumber things Nikon ever did.

  • How to change the white balance in Final Cut Pro?

    What is the best way to change the white balance in Final Cut Pro? I have some clips which are to green. I would like if possible something which might resemble the Camera Raw dialogue in Photoshop. Any way of measuring color (RGB values)?

    There is some specific help in this trainng book:
    http://www.amazon.com/Apple-Pro-Training-Correction-Studio/dp/0321635280/
    When using Color Corrector 3-Way to correct for a green tint, the bullet points are something like this:
    1) After loading the clip into the Viewer and applying the CC3W filter to the clip, open your scopes and move the window so you can see the Viewer (with the CC3W tab open) and the scopes
    2) First, if necessary, adjust the white and black levels using the video level sliders below the white and black color wheels (I use the slider above the scopes to make the trace in th4 scopes as bright as it will go without blooming)
    3) Looking at the Parade scope, the idea is to balance the whites, mids, and blacks on each color display (red, green and blue). So you watch the Parade and drag the dot that is in the center of each color wheel (starting with the whites) away from the color of your tint (in your case, green). Drag the dot until the highest portions in all three Parade displays are as even as you can make them
    4) Then do the same with the mids, using the Mids color wheel, moving its dot away from green
    5) Do the same thing with the blacks
    6) Double check the image on an external video display that is properly adjusted using color bars from Final Cut
    NOTE: This short reply is not sufficient to fully explain this technique, and you really need to understand Color Theory before doing this anyway. That's why I recommended the training book.

  • How can I search my photos by the White Balance Exif field?

    For some photos I recently imported, the white balance is way off because my camera had it's white balance set to Tungsten. I would like to be able to find ALL of my photos that were taken with a particular camera whitebalance preset.
    I tried to search using the Exif data's White Balance field, but when I use "Tungsten", no images show up, even though I know there are images with that white balance value (thats what it shows in the metadata browser).
    The odd thing is that when I select the White Balance Exif field in the search, the options on it seem to relate to a number, rather than a textual white balance (less than, greater than, etc.) and there are no options that would seem to fit a text entry (includes, for example).
    When I have it set to greater than or equal to and enter 0, I get no images, when I enter 1 I get all images, and when I enter anything else, I get no images.
    So, what am I doing wrong? How can I search on the White Balance Exif field?

    I think Aperture is trying to trick you.
    Probably, and succeeding.
    Meanwhile I exported the images that were neither "Auto White Balance" nor  "Fine weather" l and looked at those with the exiftool in GraphicConverter.
    For all those images GraphicCoverter was showing "Manual", and sadly, no number.
    It seems, we need to run exiftool from the command line, but I need to find the manual again ...
    Einen "Guten Rutsch" ins Neue Jahr
    Léonie

  • In case my input RAW/DNG files are already applied white balance , is there a way to cancel the white balance in light room ?

    Hello I am new to lightroom and I am verifying this tool  as a tool for raw converter (for image quality team)
    In case my input RAW/DNG files are already applied white balance gain
    Is there a way to cancel the white balance in light room ?
    Thanks
    Ron

    Make sure that Develop Settings being applied during import is set to "None".

  • TS2518 Where has the White Balance Setting Temp K gone? I only have a slider "warmth" left...

    I just upgraded to Aperture 3.3.1 and the setting to set the white balance to a certain temperature in K has gone...
    This is how it used to look:
    http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=18%26se ction=8%26tasks=true
    but now only a setting called "warmth" with a slider and a default setting of "0,50" is left...
    best
    Gregor

    Set the drop-down selector in the ""White Balance" brick  to "Temperature & Tint". Then you can set again a color temperature.
    Regards
    Léonie

  • Where is the white balance adjustment?

    The iPhoto app provided an adjustment for white balance, if Photos in ios8 is a major update and replaces iPhoto, where do I find the white balance adjustment?

    Do you just have to eyeball the correct adjustment rather than have it done autmatically?

  • Webcam VF0070..why cant i adjust the "white balance"?

    i am running windows XP home edition, with the latest updates.
    i am using the webcam model VF0070. under the options for this webcam, i can change virtually every option EXCEPT the white balance? the white balance is set all the way to the LEFT.
    can anyone help?

    Here is a way to obtain a salutary result in a less sophisticated way:
    Open picture file
    Go to Enhance>adjust lighting>levels
    Point to the white eyedropper (see red arrow) and click on a white object
    http://www.pixentral.com/show.php?picture=1ucDJ8LGqZC0AnydNnt48SSXsRpCTV
    This picture is grossly underexposed. I clicked on the white shirt of one of the players resulting in instant improvement.

  • Why does my white balance temperature slider have 1-100 values?

    Why does my white balance temperature slider have 1-100 values instead of a sliding Kelvin value?

    Thanks Rob. I used two Mark III bodies on a job. One had just been sent back from being repaired by Canon and apparently they reset everything. I didn't even check the file type because I only ever shoot RAW.

  • Correcting the white balance?

    I have some clips that are slightly blue on the white. Was wondering whether there was a way to correct the white balance in post-production (FC2)? Thank you.

    I'll add to Andy's reply.
    If you open the Scopes and select the Parade scope, look at the relative traces of red, blue, and green. A well balanced shot of an evenly composed scene will display on the Parade scope with fairly similar red, blue, and green traces.
    So, while you keep an eye on the Parade, move the little circle in the white color wheel slowly away from blue until the red, blue and green traces are mostly even. Then look at the traces in the zero to 20 unit range and do the same thing with the black color wheel. Then again with the mids wheel while looking at the traces in the 40 to 70 unit range.
    That should get you close. After that, it's an art. Make further corrections S-L-O-W-L-Y, with very small changes at a time, until things look right on a properly calibrated external video monitor.
    But before you do all that, look at the waveform monitor scope and adjust sliders at the base of the whiles and blacks color wheels until the trace shows video going from 0 to 100, or close to it, depending on the scene. (Sometimes, a properly displayed shot just doesn't go all the way from 0 to 100, and should not be made to do so. Most times, this will work - do it before the rest of the color correction.)
    NOTE: This is a too-short explanation of basic color correction techniques. If this doesn't make sense, seek the details elsewhere. The Peachpit Apple Training Series book, "Advanced Color Correction and Effects in Final Cut Pro 5" is really good, though it hasn't been updated for FCP 6 (not that it has to be - no changes.)
    http://www.amazon.com/Apple-Pro-Training-Advanced-Correction/dp/0321335481/

  • The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

    The Ipad2 Application Data folder is taking up huge space in C: Drive. How can I shift the User Application data for iPad2 to another Drive?

    Thanks a lot for the response. Yes, I am checking my C: drive data thoroughly now, including the hidden folders, to ascertain if something else can be moved, as per your suggestion.

  • Undocumented Feature of the White Balance Tool!

    I have not been able to find any documentation on this, at least not in the User Manual nor in the Image Adjustments Manual.
    We all wanted to be able to click in multiple areas before leaving the white balance tool in case we clciked on the wrong spot.
    Well Apple went one better.
    Instead of multiple clicking, just continue to hold the mouse button down and aperture will white balance on the fly!!! Dang. I particularly like using it with the locked down loupe.

    Where can i make the paypal donation, lol!!<</div>
    I only wish!!!
    You're welcome

Maybe you are looking for