SHIP_TO address change problem in BP

Hi Experts,
I want to change the Standard SHIP_TO address for particular Business Partner in BP tcode.
Is it possible to change SHIP_TO address? If it is possible then how to change it?
Regards,
Chandu

Hi Chandu
you can do via Administartor --> Edit internal address -> click detail button of your BP number now you may get Display/ change ..
or
you can do via bp too .. change option..
NOTE:- One BP may have many address no. got to disply list and do changes...which address no you want
hi guys i tried to edit but it is not possible via bp
we could add or delete ship to address but not modify ..
i recommend you to use web option rather than BP.
go ahead
br
muthu

Similar Messages

Wsdl address change problem

Hi;
I have problem about web service.
I created rfc function and then create web service and wsdl address.
But if I chage any parameter in function and then regeneration web service,Wsdl address changes.
I don't want to change wsdl address because every time send new wsdl address opposite side.
can you help me?

Hello Kris,
I've filled the BAPIADTEL and BAPIADTELX structures. I'm only passing the the BP number and address guid to BAPI_BUPA_ADDRESS_CHANGE in addition to the BAPIADTEL and BAPIADTELX structures.
The BAPIBUS1006_ADDRESS_X structure is empty (btw, it doesn't contain fields for the BP's name -correct me if I'm wrong) as I'm not passing it to BAPI_BUPA_ADDRESS_CHANGE - so no X against any field there.
Thank you,
Tina.

How to address the IP address automatically changing problem?

My Oracle database 10g(10.2.0) is on the WinXP platform and the system IP address often changes automatically. This leads to some troubles with my Oracle database. How to deal with this problem? How to stop the IP changing problem?

frank.qian wrote:
But my database is using an ipaddress now. When I use loalhost instead, can database accept this?The database doesn't know or care. Its all in your network configuration files ... listener.ora and tnsnames.ora, and your 'hosts' file.
Edited by: EdStevens on Dec 1, 2008 8:47 PM

PARTNER SHIP_TO ADDRESS NOT FOUND problem in PDP---Please help

Hi all,
We are using the plan driven procurement to push our requirements using the RFC user.
When running the prgm "BBP_EXTREQ_TRANSFER" to transfer the PR to SRM it shows item transferred, but its getting stuck in the ques in 'SMQ1' transaction with a log saying
PARTNER SHIP_TO ADDRESS NOT FOUND.
Is there any need to maintain any other attributes for PDP user or RFC user in ECC or SRM,
please let me know.
I am waiting for the reply,
If you have any solution then please reply to this thread.
Regards
Santosh F.

Hi
Check this note is applicable for you or not
1101215 - External Requirements: Error transfering the hierarchy
items
Note Language: English Version: 2 Validity: Valid from 10.10.2007
Summary
Symptom
When transferring the purchase requisitions with hierarchy items, the ship
to address is not mapped properly. You get the error "No address found for
partner function type Ship-To Address". The purchase requisition gets stuck
in the outbound queue of backend
More Terms
BBP_EXTREQ_TRANSFER MAPV_PARTNER_FROM_EXT
Cause and Prerequisites
This is due to program error
Solution
Please implement the attached correction instructions or import the
corresponding support package.
Valid Releases
Software Component Release From
Release
To Release and Following
SRM_SERVER 550 550 550
Support Packages
Support Packages Release Package Name
SRM_SERVER 550 SAPKIBKT12
muthu

HP LaserJet Pro P1606dn ip address change automatic

i have a HP LaserJet Pro P1606dn, there is problem with IP Address, ip address change automatic in this reason i am not able to use the printer, pls solve my problem....

Hi @Naksain,
I see by your post that the printer's IP address changed automatically and you can't use the printer now. I can help you with this.
From the Configuration page, get the printer's IPV4 address, try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer)
Printing a Configuration Page.
If you can still access the printer's Embedded Web Server, then create a new port with the new IPV4 address.
Go to start, devices and printers, right click the printer, go to printer properties, select the ports tab.
Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
Type in the proper IP address for the printer.
Make sure the printer is online.
Test the printer.
Setup a Static IP address for the printer, this way the printer will keep the assigned port.
Printer Does Not Maintain Wireless Connection.
Disregard the title. Under Windows, go to Solution four: Assign your printer a static IP address.
Just use the IPV4 address already assigned to the printer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to deal with dynamic IP address changes

I have installed Fodero C3 and Oracle 10g successfully. Oracle 10g use web OEM console to manage database. However, my internet provider only provided me a dynamic IP address. When I installed Fedora C3, Linux server automatically picked a Hostname like " ip12-345-678-90.dc.dc.cox.net". After I created database, all database files also used this hostname. Then Oracle web OEM console worked fine. Due to the dynamic IP address assigned by ISP, their DHCP server changed the first part of IP address(ip12-345-678-90)frequently to another one. After IP address changed, I couldn't start up web OEM console and listener because they couldn't find correct hostname (IP address). I have talked to my ISP. It seems that it can not be solved. Anyone knows how to deal with this problem through 10g and OEM console themseleves. I also think about to configure Linux server to solve the problem. I really need your help. Thanks in advance

Thank all of you so much to respond my questions. I think I have solved the problem. Since the key point was that Oracle 10g OEM console could not work with the frequent changes of IP address made by my ISP. I just bought a 54G wireless router. Then connecting router to cable modem. The cable modem still gets the dynamic IP from ISP, but the router automatically assigned a static IP address to my Linux system with the range from 192.168.0.0 - 192.168.255.255. This IP was control by my router. It is nothing to do with ISP. So I re-created Oracle database with this new static IP. Then OEM console and listener can startup and connect to database without problem. I do think other guru's methods also will work. I just have no time to try them one by one. Thanks again. Your inputs make me learn many things.

Ship-to address changes on customer master not updating orders

We have recently noticed that ship-to address changes on the customer master made with XD02 no longer show up on existing standard orders. Similar changes to the sold-to addresses do show up but no tthe ship-to addresses. Does anyone know how we can resolve this problem?

hi jeff,
the adresses of a partner is
- with reference to the master-data ( if unchanges in the Order )
- of copied in the order and then changed and saved onlyy for the order.
in the first case, a change of the main data will effect a change in the order.
in the second case, the change of the main data will not change the order, data - they are separate.
you can see this in se16 / table vbpa.
look at the adressnumber.
Adressnumbers of 9++++ are of the 2nd - manual type.
I guess, in the ship to partner, there is done a manual change in the order.
in solt to data normally you don't need such a change. therfor the sold-to partner will get the changes of masterdata -- the ship to partner has manual adress of the orden.
hans

ACS 4.2.0 AAA-server-IP-address changing to 169.254.x.x

Hello,
I have ACS 4.2.0.124.15 installed on a windows server 2008.
In the configuration menu : network config > AAA server , the AAA-server-IP-address change to 169.254.x.x each time I disconnect the ethernet interface of the server.
Allthough, the ip adresse in my network connection of the windows-Lan-connection is set to static.
Whe I reconnect the ethernet interface of the server, it stays in 169.154.x.x. And I need to reconfigure the real static adresse each time.
Do you knows this problem. Is it a way to avoid it ?
Michel Misonne

Hello,I have ACS 4.2.0.124.15 installed on a windows server 2008.In
the configuration menu : network config > AAA server , the
AAA-server-IP-address change to 169.254.x.x each time I disconnect the
ethernet interface of the server.Allthough, the ip adresse in my network connection of the windows-Lan-connection is set to static.Whe
I reconnect the ethernet interface of the server, it stays in
169.154.x.x. And I need to reconfigure the real static adresse each
time.Do you knows this problem. Is it a way to avoid it ?Michel Misonne
Hi Michel,
It was issue in ACS 1113 SE Appliance and clear solution for the above is mentioned in the below link
http://www.ciscosystems.com/en/US/products/sw/secursw/ps2086/products_tech_note09186a00808d9199.shtml#stat
HTH
Ganesh.H

IP address changing

I made the mistake of getting BT Infinity when it became available in my area on the 28th May this year.
After many dsconnections an openreach engineer came out in mid July and spent 4 hours checking everything before realising that the initial installation hadnt done correctly in theh cabinet and that they hadnt put the new master socket on.
After more disconnections, most of which are only brief and a few more longer ones I contacted BT again and a second engineer called on the 20th August saying I had complained about a lack of speed. I told him that the speed was fine when it was connected but it dropped the connection sometimes and the main problem was that the IP address frequently changed, even if I hadnt noticed the orange ligh being on the router or it had stoped me surfing the web.
As I wanted to set up a FTP server, as I had done with previous ISPs, for family and friends to share files, I needed a stable IP address and I knew I had a dynamic address but that should stay the same unless I switch off or reboot the router. He checed everythinghe could and eve chnaged the new B home Hub 5 in case that had a fault that wasnt showing and thought that it may be a problem between the BT servers and the exchange as it showed on the schematic that BTs own diagnostic test had identified on the track a fault page as the building housing the server were outlined in red.
Needless to say it is still dropping occassionally and the IP address is constantly changing. I think it did keep the same IP for 48 hours once but usually it will change at least 3 or 4 tmes per day. Between 00.34 and 22.40 yesterday, the 22nd September, it has changed 9 times and had the orange light on the Home Hub 5 at least twice for several minutes, when I could neither send and receive emails or surf the web.
I went to check what was happening on the track a fault page and saw that even though this was an ongoing fault from the initial installation, there were two closed faults even though I was still waiting for BT support to call me back as promised last Saturday afternoon, they did call but hung up on me as soon as I had said "Hello" so I was expectin them to call back or email me.
I then sent a message using the contact us form on the BT site.
I was called this afternoon and was on the phone for the best part of 4 hours either talking to many different people at BT, waiting for them to call back or on hold, explaining over and over again that my main problem apart from the line disconnecting was the frequent changes of the IP address and if they could not provide a stable one that only changed when I switched the router off then I wanted to cancel without any penalties for early termination as there was a fault that BT could not fix.
I was told by one "technical" support guy that the IP can change every 24 hours, which I agreed that if it was set for a 24 hour lease period and I switched the router off and the lease expired before I switched it back on that it would change but that if the router was left on then it should not change while I was using it. Bearing in mind I have had this discussion many times over many months with various BT support personnel I have given them long enough and asked to be trasnferred to someone who could tell me if I could terminate my contract as BT was in breach of their contract to supply me with a stable connection.
He said he was transferring me, after 30 minutes on hold I ended up in the sales department where a very nice chap told me that he would transfer me back to technical again as they needed to put a note on my file saying what they had told me about being unable to provide a stable iP address and to then transfer me to the correct department. On hold again then explain everything agan etc etc then transfer to customer options where I was told I could cancle if I paid over £300 in fees or I could take out a business package to get a static IP.
I was also told that it was in the T and Cs that they did not have to provide me with a stable IP address. I asked him to send me an email with the part that said that and he said he will do that tomorrow and will also call me back tomorrow afternoon.
I have had a look on the T and Cs from a link on this site and using the find next box in internet explorer, there is no mention of IP or address, so I do not know where he will find the part about not having to provide a stable IP address.
I have tried to keep this as short as possible but as I have summarised and condensed 3 months worth of discussions into these few paragrpahs, it does appea to ramble on a bit, sorry.
Can anyone tell me definitively if I am correct in expecting BT to provide me with a connection that doesnt drop more times in just over the 3 months that I have been with them than in the previous 12 years I have had an internet connection with varous ISPs and aslo are they correct in stating that they do no have to provide an IP address that doesnt change even if I do not switch off or reboot the router as I am on a residentia package with a dynamic IP.
Thanks for hopefully taking the time to read through this post and for any help you can give me

Its not essentail that I have a static IP as its for personal use only not for a business but as you have stated it can take a while for the updated IP address to propogate and even if it instantly updated the new IP address I dont think anything would propogate quickly enough to be of any use when the IP can change as often as 9 times in less than 24 hours, as it did yesterday.
All I am asking for is an IP addresss that doesnt change unless I switch the router off or have a power cut. Surley that should be a simple enough thing to arrange.
I can even put up with the temporary connection drops, as long as they only last for a few minutes a few times a week and not as regularly as they are doing at the moment.
Could a mod please merge this thread with the other one in the Infinity section and place them both in the Infinity section as I would like to know if other Infinity users are having frequent I address changes and there is more chance of them seeing this thread and replying to it if it is in that section.
Thank you.

Ship to address changed in already invoiced orders

Hello SAP Experts,
Is there a way to prevent customer (ship to) address change in already invoiced sales orders while changing ship to address in XD02?
Since the address pointing to ADRC table, everytime we make changes in XD02, it is reflecting in all SD documents new and old. My client has a unique requirement, they want to change the address in XD02, which should only change to new sales orders. They do not want to change the address in already invoiced sales orders.
Regards,
Sridhar Dawady

Dear Sridhar,
I try in my server ur problem.
First i checked Sales report one particular customer yesterday and today report their one name is there.
After that i changed same customer New Name after that i post one document.
and i checked sales report in that New name came for all document include old document also
So May be ur case also if u change address, i think new address will show.
U also first try in sandbox server.
Bcz i am not sure abt this.
Satya

I want to change my Apple ID for IPad because forgot password and all email addresses changed so cannot get informations for password reset. What can I do?

I want to change my Apple ID for IPad because forgot password and all email addresses changed so cannot get informations for password reset. What can I do?

I was wondering if you ever figured this out. I have the same issue. When I try to use the support communities, there are so many with the same problems and never seem to be any replys?? Not very helpful and I can not get Apple to return my emails.

Dealing of address change of org. units

Here I am putting my question again. If we define the org. units like Plant,Sales org. ,Company code etc. and then change their address,the address changes in the previous documents also.
Are there any settings through which we can let the old address in the previous documents be the same and at the same time can create new documents with new address.

If we define the org. units like Plant,Sales org. ,Company code etc. and then change their address, the address changes in the previous documents also.
I am not sure if that's a bug or a feature.
If you consider it is a bug, maybe you should consider some kind of Archiving system so you keep a copy of the original invoice "as-is".
Imagine you change a SAPSCRIPT or SMARFORM and you need to re-print the invoice. Not only the address will change, but also the format of the printed billing document itself!
An Archiving system would solve this problem because it would allow you to re-print exactly the same invoice that was printed months ago.
Best Regards,
Franck

What impact is there on ODSEE (11.1.1.3) if host IP address changes?

We are upgrading hardware and DS software.
First we install ODSEE on a new host. Then we migrate the Directory schema and data from iPlanet 5.1 to ODSEE 11.1.1.3 on the new host.
What we would like to do next is to change the ODSEE host's IP number back to the original iPlanet's host's IP address.
What problems are there in ODSEE if/when host IP address changes?

As long as the directory server is able to use a constant host name and FQDN, it should not matter that the IP address for that host changes. You are well advised to test before doing it in production but I do not consider this to be a problem.

Cannot update apps because of address change

I dropped my mobileme account and haven't had a problem until I tried to download some updates on apps. On my phone I get the message that my account has changed. Duh. Then I get the message: Tap continue and sign in to view billing info. I do this and approve the billing info (which comes on the new email address) and then try to install the download. But again and again I get the same message "Tap continue and sign in..." I am at a loss as to how to get my phone to adapt to my computer address change. Do I need to eliminate the apps and start over or what?

No, you need to go back to your original account. iPhone apps (even free ones) are DRM-protected and linked to the iTunes Store account used to download them. Your AppleID is your account name. It doesn't matter if it's not a valid email address (even though Apple recommends using your email address when you set up an account, a bad idea in my opinion).
So, go back to using your mobileme account name (your AppleID), but so you get the receipts, etc., just change the email address associated with that AppleID to your current address. Do that here:
http://myinfo.apple.com/

Reconfiguring EBS after IP address change

Hi All,
In our EBS(12.1.3) , only IP addresses have been changed as part of a migration.
I believe I need to clean up FND_NODES and rerun autoconfig for IP change to be recorded in the table.
I also need to do changes to listener and tnsnames if they are using IP address.
I could not find any standard doc on metalink. Can somebody refer me the standard oracle's steps on reconfiguring EBS after an IP change.
Edited by: Bharat on Nov 27, 2012 4:48 AM

Hi;
Please review:
change IP of the server.
Also see:
Changing IP Address after installing R12.1.1
http://appslab.blogspot.com/2009/08/ip-address-change-on-existing-r12.html
If you have still problem than update thread
Regard
Helios

SHIP_TO address change problem in BP

Similar Messages

Maybe you are looking for