Ship To address changed in SO, is it updated in Delivery?

Sales order is created, delivery is created.
Then in VA02, in sales order header level, Tab Partners, ShipTo Street/House No. is changed. Does this change go through to the delivery automatically?
Please help,
Typewriter

Hi,
After much testing (and reading theory), I have got it.
With regards to changes done in the Street address of SH To in a sales order, there are 2 PARTS.
Part 1 - Changes do NOT come through -
You have created a sales order, then created a delivery.
In table VBPA, Address indication for WE is Dand address # is say 83630 .
Now you go to VA02, Header level, Tab Partners, change Street / House number. Save sales order.
In VL02N, check the delivery SH To address - there is NO change. (it remains the original)
In table VBPA, Address indication for WE is now E and address # is say 9000000748 .
Part 2 - Changes do come through -
You have created a sales order, then in VA02 you change the SH To information (Street / House #). Then created a delivery.
In table VBPA, Address indication for WE is E and address # is say 9000000749.
The delivery shall have the changed SH To information.
Then you go to VA02, AGAIN change the SH To address (i.e. Change2) in the sales order. Go to VL02N, you shall see that Change2 has automatically come through to the delivery.
So, in part 2, when ever you change SH To address in your sales order, the change shall be automatically updated in your delivery.
The reason for this is - in my understanding -
In table VBPA, Address indication for WE is E and address # is STILL 9000000749. Thus system is checking E and 900000749 both are same as before, thus NO delivery split, NO problem; the SH To with change2 is transferred from sales order to the delivery.
When SAP consultants did tests in accordance to Part 1, there was no automatic change in SH To address is delivery. That is correct.
I suggest - for this particular case - you delete the delivery and after doing changes in your order, create a new delivery. The changes shall come through.
After that any number of changes done in the sales order, those shall come through to your delivery. (Of course all this is with condition that invoice is not yet created, as discussed earlier)
Regards,
Typewriter

Similar Messages

  • Ship-to address changes on customer master not updating orders

    We have recently noticed that ship-to address changes on the customer master made with XD02 no longer show up on existing standard orders.  Similar changes to the sold-to addresses do show up but no tthe ship-to addresses.  Does anyone know how we can resolve this problem?

    hi jeff,
    the adresses of a partner is
       - with reference to the master-data  ( if unchanges in the Order )
       - of copied in the order and then changed and saved onlyy for the order.
    in the first case, a change of the main data will effect a change in the order.
    in the second case, the change of the main data will not change the order, data - they are separate.
    you can see this in se16 / table vbpa.
    look at the adressnumber.
    Adressnumbers of 9++++ are of the 2nd - manual type.
    I guess, in the ship to partner, there is done a manual change in the order.
    in solt to data normally you don't need such a change. therfor the sold-to partner will get the changes of masterdata -- the ship to partner has manual adress of the orden.
    hans

  • Ship to address changed in already invoiced orders

    Hello SAP Experts,
    Is there a way to prevent customer (ship to) address change in already invoiced sales orders while changing ship to address in XD02?
    Since the address pointing to ADRC table, everytime we make changes in XD02, it is reflecting in all SD documents new and old. My client has a unique requirement, they want to change the address in XD02, which should only change to new sales orders. They do not want to change the address in already invoiced sales orders.
    Regards,
    Sridhar Dawady

    Dear Sridhar,
    I try in my server ur problem.
    First i checked Sales report one particular customer yesterday and today report their one name is there.
    After that i changed same customer New Name after that i post one document.
    and i checked sales report in that New name came for all document include old document also
    So May be ur case also if u change address, i think new address will show.
    U also first try in sandbox server.
    Bcz i am not sure abt this.
    Satya

  • Transport shipping point address change

    Hi All,
    I have to change shipping point address in production. I have tried changing shipping point address in Dev system but it could not generate transport request. Please guide me the way to transport shipping point address change from Dev to Production.
    Thanks & Regards
    Ashok Reddt

    Usually TR are created by Basis team, if you don't know the process who is suppose to create TR, ask your manager to get the same.
    Once after you are given the TR then save the changes in the TR.
    Once done the changes in development system, you need to test it in test system( Quality client) then you need to request for User to test(UAT). After confirming the changes by User then you need to move these changes to Production.
    But some times  for some clients will do testing both in Development as well as Quality client.depends on client process. But testing is mandatory.
    The above process usually followed by most of the clients.Check your client process exactly how it is followed then proceed further.
    Please let me know if you need any further help.
    Srinu.

  • Bill to & Ship to address change at AR Invoice Level

    After AR Invoice I unable to change Ship to Address but I can change same Bill To Address Is there any Reason??
    Actually there is wrong Ship to Adress follow by User so he need to change that..Please help..

    Hi Mangesh..
    It is not possible to change the Ship to address after the document is saved, it current default system behavior...
    If you need to change the address you to do before saving the document.
    Ship to Address
    Displays the customer’s ship-to address and additional description as defined in the business partner master data. If required, change the address and the description.
    To change the description, either enter in the free-text field, or specify in the address component. To open the Address Component window, choose . SAP Business One updates the address and the description only for this document; it does not affect the business partner master data.
    Regards
    Kennedy

  • VA02 Ship To address change

    Hello All,
    Is it possible to change the ship to address from VA02: assuming delivery/billing is not done yet?
    If so, how?
    Regards.
    Edited by: Rags on Jan 21, 2009 11:00 AM

    Hello srini 1379 
    i found your answer about to change address data in sales documents.
    Do you know, what I can do, we can stop this?
    We would like to block this in the sales documents --> only allowed for cpd customer.
    Thanks for your information.
    Petra Schober

  • Ship to Address changed

    Hello SRM Guru's,
      SRM 5.0, Classic Scenario.
    Basis had just implemented support stack 10, and the Ship to address is getting changed when the PO is created in R/3, using plant address to determine the Ship to address. We had setup different delivery addresses in SRM and this appears a shopping cart is created but the information is different in R/3 PO.
    Can anyone tell me why this is happening and how it could be fixed?
    Many Thanks

    Hi,
    Pls see the foll notes:
    <b>Note 767461 - Transfer of ship-to address to back-end system</b>
    Note 887832 - ECS: Split for delivery addresses missing in purchase order
    Note 1022048 - BBPSC03: Ship-to address gets cleared off
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Ship To address change

    Hi All,
    I have an issue with the shipToAddress changes in Delivery, that has to be synch with SO.
    only the address filed(vbpa-adrnr) has to updated with new address no generated after we change the address in delivery .
    can i use "BAPI_SALESORDER_CHANGE"
    wht are the fields which i need to pass to this FM
    bye
    NKS

    Hi Srinivas,
    Check the code for parameters of BAPI_SALESORDER_CHANGE in the following useful link:
    Re: 'BAPI_SALESORDER_CREATEFROMDAT2' help! ?
    Hope this will help you

  • Shipping point address Change :

    I was changing the street address of shipping point . I got the below error "The region DE is not defined for country DE" . And not allowing me to change the street address. -
    Please suggest.

    This error means that region DE is not defined for country DE (Germany). Germany has regions 1-16. They don;t have DE as region  in standard system.
    Please check the address. Per German standards & SAP standards DE cannnot be a region in Germany. So your address is incorrect.
    But if you want to create a new region then you can in SPRO.
    Hope this helps !

  • Ship from address in PO

    what are the implications if ship from address change at the last minute(just before goods reciept)
    Thanks for your help

    Dear Chandra,
    Shipping address can be changed at any point of time. This is comes under Partner Rols in Vendor Master and Purchase Order.
    In Purchasing document, you are not allowed to Change Vendor. However, users can change Goods Supplier and Invocing party before goods receipt.
    Hope this information will be useful.
    Bye,
    Muralidhara

  • Ship-to address load

    Hi Gurus,
    How do I load the ship-to address (about 600) which is not related to any company code. Which means any employee can make use of the 600 ship-to addresses.
    By (Ship-to address) default, company code address is displayed in F4 search on the SC, how do I disable it ? and I want to show the 600 ship-to addresses only.
    Thanks

    Hi,
    For mass creation of delivery addresses,see solution in the foll thread:
    Mass creation of delivery address
    BR,
    Disha.

  • Updating a vendor table when address changes in infotype 6

    hello all,
    when an employee changes his personal information in the PZ02 service, it updates the infotype 6, as soon as the update is done it has to update the LFA1 or LFB! vendor table.
    is there a workaround for this
    BR
    venu

    thanks for the reply.
    whenever there is an address change in IT6 it should update the vendor table(for eg: if changes are done in PA30 and not from ess, so its kind of generic version that i have to create to update the vendor table either from ess or PA30).
    i am already using the HR_ESS_ADDRESSDETAIL and HR_ESS_ADDRESSLIST for changing the fields on the iview.
    (t77www_sc)and linking it to pz02.so what u mean is i can go ahead and write the code in the same module for updates.
    is this is the only way to do it, or we can do it by BAPI_address_change.
    I am trying to know all the different ways it can be done.
    a)can i use a BAPI if so which one?
    b) can i do it thru workflow.
    c)or user exit.
    Please help me out with details
    thanks
    venu

  • Ship to address on delivery different than sales order

    Hi Experts,
    Please help, I have a sales order with a Ship to" address in NY but when i created a delvery shipping address on delivery paperwork printed a different "Ship to" address (NJ address). I checked delivery header data and under "partner function" tab i see partner function "SH" has the NJ address. I checked the sales order and this address is not coming from sales order "partner function". Any idea where this might be coming from??
    Also please help me understand "partner function" (SH) and how this is different than ship to. Thanks!

    If the solutions already provided do not help...you please check the ship to master data (xd02) and check the address. Also check if the output program is printing the ship to address based on the master data or the delivery partner functions.
    Also check if in the spool , earlier delivery output has NJ address and it is being retained . Couple of times, we had an issue of things being printed from the eearlier output and not from the current document. You please check if "New Spool Request" is checked at the output configuration.
    Hope it helps
    Regards
    Sai

  • Monitor the changes of Ship to address in Sales Order

    Hi,
    My client has an requirment which they would like to monitor whether the ship-to-address has been modified after the order were save. 
    e.g. 
    Sold-to 12345
    Ship-to 12356
    SAVE the order
    After the order are sale and sometime later, the user went in VA02 and update the ship-to-address to 23456
    now
    sold-to 12345
    ship-to 23456
    It there anyway we can have a report to check if the ship-to has been changes? 
    thanks,
    Rebella

    Hello Rebella,
    The best option of monitering the changes incurred fro the Ship-to-Party details of a SALES ORDER are as follows:
    If you are interested to pick up the information of changes values of Ship-To-Party from a Sales Order then i think you can use the table VBPA. This table will contain the updated value of Ship-To-Party partner function of a Sales Order.
    Second option would be to use a program which actually run when you open a Sales Order in VA03 --> Environment --> Changes. You can develop a t-code which shall call this program.
    You can also use the T-code AUT10 for tracking changes for a Sales Order.
    Hope these infotmation helps you in resolving your issue and please don't forget to mark your thread as closed.
    Regards,
    Sarthak

  • User Unable to change Ship to address in SC while creating

    Hi All,
    When user is trying to change the ship to address which was defaulted is unable to make change.
    USer is trying to make manual entry in the NAME field change so that the other field would automatically gets changed withrespect to NAME in the SHIP to address tab.
    We have informed user that there exist Find option for other ship to address to choose.
    But user has insisted that it is easier to make manual change in NAME filed of the SHIP to address tab so that evrything should automatcially gets changed ,This will avoid search time .
    All other fields like CC & GL  are able to make change
    Please let me know what needs to be done to change the ship to address.
    Thanks
    Prasanna
    Message was edited by:
            PRASANNA HAVINAL

    Hi Ravish,
    I am already changing the UOM in the same include and in the subroutine "USEREXIT_MOVE_FIELD_TO_VBAP".  But it is again over writing in the standard program.  What I need to do, to remain same UOM.
    Thanks,
    srinivas.

Maybe you are looking for

  • I can not get to verified my Apple ID account, and I don't know what to do now.  Please help..

    I am trying to get a game from the APP store, but every time I try to down load it; it keep telling me to verified my account. But I don't know how to do it, because I didn't get anything in my email address to do so.

  • How do i use Arrays and For Loops in Loading Multiple Images?

    I am struggling to load a sequential array of images to appear like a moving image. So when u click the button the images load one after the other. The code below is what i have so far, but it fails to do what i seek in that there's only one image lo

  • V21 5800 - reply to MMS with SMS?

    I'm sure that before I upgraded to v21 I could reply to an MMS with an SMS by choosing from the options menu reply->via text message.  The "via text message" bit has gone now there is only a "to sender" - which replies with an MMS, or "with audio mes

  • Performance tuning from Basis point of View ?

    Hi, Can anybody help me in doing the performance tuning from Basis point of view. What all parameters are involved in it and what are the values need to be initially assigned and what all factors need to be kept in mind.? Thanks in advance.

  • Portal/Java system copy - test run

    Hi all, We are trying to do a test run of the java system copy - but would like to know where this option (test run) is in sapinst - which screen - we get to a point where it shows the parameters chosen with an option "restart system" chosen - so we