Ship-to party 1600 not defined for sales area 1000 10 20

Hi Friends,
I am making  inquiry(VA11).I am using a material and sales org.combination as (1000/10/00).
I have maintained the same sales org. for material also.i am using for example sold to party as 1600 and for this I checked in XD02 the combination of sales org is (1000/10/00).
But after hitting enter I am getting the errror as Ship-to party 1600 not defined for sales area 1000 10 20 but for 1600 customer ship to party is defined in (1000/10/00).
This error I am getting is quite unusual.(as I am using 1000/10/00 this combination exist for material and customer but why am I getting the error for 1000/10/20. ?).
Any pointer will be rewarded.
regards

in mm02 i have already changed the division as 00 but still getting error(looking quite strange)
same error I was getting earlier but got the solution after changing division in mm02 but not striking this time.
also in xd02 for sales org 1000 and div. 20 i maintained both reference division for condition and reference division for customer as 00 bot no result yet.
same error.
Any other inputs.
Regards
Edited by: Amit Kumar on Oct 29, 2008 8:39 AM

Similar Messages

  • Error message: Ship-to party 1111 not defined for sales area 1000 01 50

    Hi friends,
    I created a new division 50 reference the one available. I maintained all the combination in sales area as far as I know.
    When created SO, I got a error message saying "  Ship-to party 1111 not defined for sales area 1000 01 50". Message No VP210
    Please advise where I missed configuration.
    Thanks,
    Linda
    Edited by: LindaSAP on May 25, 2010 5:40 PM

    Hi,
    Please check the below links
    Ship-to party not defined for sales area
    "SHIP TO PARTY NOT DEFINED FOR SALES AREA "
    Ship to party is not defined for sales area..
    Ship-to party not defined for sales area
    Ship-to party 147 not defined for sales area US DS 20
    ship to party -sales area error
    Regards
    Senya

  • Ship-to party 10106086 not defined for sales area 6000 40 30 error

    HI gurus,
    We have maintained cross divisions 00, we VR02 have maintanied the combined the divisions and we have maitned the division at MM01, we are getting VP210 error: Ship-to party 10106086 not defined for sales area 6000 40 30.
    please help me in this we are unable to create a order.
    this is urgent.

    Hi,
    The error is Ship-to party 10106086 not defined for sales area 6000 40 30
    Here system is considering distribution chan 40 & division 30 
    Go to VOR1 and maintain like as
    Sales ogz - Distribution channel - Distribution for Condition  - Distribution chn for CUST/MATERIAL
    6000 - 40 - 40 - 00
    Then in VOR2
    Sales ogz - Division - division for Condition  - division for CUST
    6000 - 30 - 30 - 00
    Then also check you have created customer for sales area 6000-00-00
    Check in VOV8 go to details of your sales order type under general control tab Check division should be blank
    OR
    Remove division form material master basic data tab 1
    Kapil

  • Ship-to party 147 not defined for sales area US DS 20

    Hi,
    I am getting following error while creating a sales orcer with ref to contract
    Ship-to party 147 not defined for sales area US DS 20
    Points will be rewarded for satisfactory answer.
    Thanks & Regards,
    Vinayak

    Hi,
    After maintaining in US DS 20 it is working fine.
    But normally we never maintain in US DS 20 for other transaction.
    then why it is asking for this transaction.
    we always create in US DS 10.
    is their mistake while creating a BP or any SPRO changes required.
    Thanks & Regards,
    Vinayak

  • Ship-to party not defined for sales area

    Hi all,
    I am really confused while creating a sales order, I need your help.
    My sales org. - 1083, distribution channel - CY, Division - CW.
    When I enter va01, in the initial screen I enter the above details. Then it goes to the create sales order screen where I enter my customer details.
    After that, I enter my material number and quantity, it is giving me an error ship-to-party not defined for sales area 1084 CY and ZO ( other division) instead of 1084 CY and CW.
    Where did I mess up ?
    Thanks,
    -Chandru

    Hi,
    Go to SPRO - SD - BASIC FUNCTIONS - PARTNER DETERMINATION Just check whther your partner function (SH) is assigned to your account group and also exists in the partner determination procedure.
    Just try and maintain it there against your account group and against your sales document type in VOV8.
    Also open your customer master for which you are trying to create this sales order. Just check whther in the partners tab , SH is shown? You can either use transaction BP or XD03.
    Let me know, reward points if helpful.
    Regards
    Ravi

  • Ship to party not defined for sales area x/y/z

    Hi Friends,
    While creating sales order I am getting following error---
    Ship to party not defined for sales area x/y/z .Please help to overcome this problem.
    xsales organisation  ; ydistribution channel ; z--division
    Regards

    Please go in Transaction XD01- Create Customer.
    then in Account Group, Select Sold to Party.
    Assign sales area , xsales organisation ; ydistribution channel ; z--division
    and check.
    Hope thiswill solve your problem

  • Err.Sold-to party 1 not mainted for sales area EL01 01 01

    Hello SAP Gurus
    I am trying to save a quote from an external application using .NET connector which calls the bapi 'BAPI_QUOTATION_CREATEFROMDATA2'.
    I am getting back an error 
    E        VP     197       Sold-to party 1 not mainted for sales area EL01 01 01 .
    I am trying to search for this error on all SAP related areas and am not able to find anything that answers my question.
    Any feedback will be highly appreciated.
    Thanks
    Ram

    >
    Ram Prasad wrote:
    > Fortunately or unfortunately I am the only SAP guy in my company and I am actually certified in XI and but am wearing different caps at different time.
    ..Exactly You remind me my early career of SAP,I was the Only Person In My project,No matters it was kind of Support one,But i had been asked to handle some Tedious Asset Accounting isses-Some how i servived and turn the things around me,And Believe me The Stuff i learnt in such tiny 7 month is far More than i learnt my rest of my Life.
    Fortunately~

  • Ship-to Party is not maintained in sales area

    Hi,
    While creating a sales order for a company code and if we give a different ship-to party, which is not belongs to that sales area, I'm getting a message "Ship-to Part XXX is not maintained in sales area abc xxxx yy zz".
    When I tried to add one more partner at header level, say "Mark for customer", and give the different customer number, the error is not coming.
    Can anyone tell whether this check will be done only for standard partners like Sold-to, Ship-to etc? and not for custom partners?
    Thanks,
    Kishore

    Try the following:
    BADI_SD_SALES        General Enhancements for Sales Order Proces
    BADI_SD_SALES_ADDON  Special enhancements which are not universa
    BADI_SD_SALES_BASIC  Enhancements for Sales Order Processing Par
    BADI_SD_SALES_ITEM   Enhancements for Sales Order Processing (It
    Andrew

  • Error:Ship to party not defind for sales area

    Dear Friends,
    I created a material for sales area 1000/10/00.
    The division that i assignes was 05 in MMD.
    Now when i create a order the system gives a messege "ship to party 1033 not defind for sales area 1000/10/05, but at the order initial screen i had given sales area 1000/10/00.
    Where is the problem?
    regards
    debasish

    Extend or create the customer to the sales area 1000/10/05 or change the division in the material as" 01" then ur problem will solves.
    Regards,
    kishore.
    Edited by: kishore gopala on May 13, 2008 1:12 PM
    Edited by: kishore gopala on May 13, 2008 1:26 PM

  • Tax condition(JVAT) of ship to party is not triggering in Sales order

    Hi,
    Tax condition(JVAT) of ship to party is not triggering in sales order...
    Scenario:
    Tax condition types:
    JCST- CST Payable
    JVAT- VAT Payable GJ
    Customer Tax classification for JVAT in OVK3:
    1-  VAT 4%
    A- VAT 0%
    B- VAT 2%
    Material Tax classification for JVAT in OVK4:
    0-Tax Exempt
    1-Full Tax
    In CMR for
    Sold to Party:1001(Mumbai), In Sales Area Data(Billing Tab),we have
    Country/Name/Tax category/Name/Tax Class./Descrption
    IN / INDIA / JCST  / CST Payable / 1 / CST 3%
    IN / INDIA / JVAT / VAT Pay GJ  / 1 / VAT 4%
    In CMR for
    Ship to Party:2001(Gujarat),In Sales Area Data(Billing Tab),we have
    Country/Name/Tax category/Name/Tax Class./Descrption
    IN / INDIA / JCST  / CST Payable / 1 / CST 3%
    IN / INDIA / JVAT / VAT Pay GJ  / A / VAT 0%
    Access Seq:   JLST
    Condition table : 368(Country/Region of Del Plant/Region/Tax class1-Cust/Tax Class1-Mat)
    Condition record maintained for JVAT as IN/GJ/GJ/1/1 as 4%
    Condition record maintained for JVAT as IN/GJ/GJ/A/1 as 0%
    Now the sale(Shipping to) is happening in Gujarat..
    In sales order
    I entered SP:1001 and SH: 2001
    When i check the pricing in sales order,condition type JVAT is triggering 4% which is not true as it as to pick 0%
    Kindly guide me where i went wrong...
    Regards
    Azeez.Mohd

    Hi Friends.
    I found the solution...
    Its customization mistake..
    Solution:
    When we have 'n' tax categories then we should have 'n' condition tables..
    I have 2 tax categories: JCST and JVAT but i have only one condition table 368 which is wrong.. i should have 2 condition tables.. so i created another con. table 468 and assigned to access aeq JLST.
    then when i create cond. record , we have to select the appropriate table then it will fetch accordingly.. in sales order..
    with regards

  • Material not defined for sales org

    Hi,
    when i try to select the item code in CUSTOMER-MATERIAL info. i cant able to get the item which created in MM01. and also getting the message .
    "material not defined for sales org". can you help us how to resolve this one.
    thanks
    Bala

    That means that particular material has either been created without extending the required sales views or material code has not been created.
    Go to MM01,  key in that material code, select all sales views and execute.  Maintain the required sales area and save.
    thanks
    G. Lakshmipathi

  • Order type 'OR' has not been defined for sales area (IDOC related)

    Hi,
    iam getting the status error as order type 'OR' has not been defined for sales area for ORDERS inbound idoc(it's in status 51),i looked at EDPAR(voe4) table and edsdc(voe2) tables,  the sales area has been defined, i don't know why iam still getting this error. please let me know if anyone have any idea or faced any kind of this problem.
    Thanks

    Hi,
    I believe this is nothing to do with the setting the IDOC value..Some config is missing...
    Check to make sure if there is a record found in the view V_TVAKZ for the combination..
    IF not check with your function consultant regarding this..
    Thanks,
    Naren

  • Order type has not been defined in sales area '1000','10','00'

    Hi Gurus
    I am getting this error when try to create order
    Order type has not been defined in sales area <'1000','10','00'>
    but I checked in the configuration and assigned
    SPRO:SALES:SALES : DOCUMENTS :SALE3S DOCUMENTS HEADER:
    ASSIGN SALES DOCUMENT TYPES : Assign sales order types permitted for sales are :1000 -10-00
    But still I am getting this problem when trying to creates sales order from va01.
    Thanks
    Kris

    SPRO --> Sales & Sistribution --> Sales --> Sales Document Header --> Assign Sales Area to Sales Document Type
    The above is one option.
    Also Check Sales Document Type in T.Vode: VOV8
    SPRO --> Sales & Sistribution --> Sales --> Sales Document Type
    whether The Sales Document Type is Block, which could also be a possible reason.
    Also check the Sales Area setting.
    Regards,
    Rajesh Banka
    Reward points if useful.

  • Sales document type is not defined for(sales org/division/distribution chan

    Hi Friends,
    I am getting the error that sales document type is not defined for x/y/z(sales organisation/division/distribution channel). while creating sales order.
    Any pointers will be rewarded.
    Regards

    Hi there,
    When you define a sales doc type in VOV8, you also should assign that to the sales area SA (sales org / dist channel / division).
    Only then you will be log a sales order for a sales area.
    Check if you have done it. You will find it in SPRO --> Sales & Distribution --> Sales --> Sales doc header --> Assign sales doc type to SA.
    Regards,
    Sivanand

  • BAPI_CONTRACT_CREATEFROMDATA not defined for sales org distr channel langu

    I am using BAPI_CONTRACT_CREATEFROMDATA to create a contract. If I use a material other than a product, I get no error. If I used a product type material< I get an error statign that the material is not defined in sales organisation dirtibution channel langu EN (I have checked the material and it does contain text.
    Any ideas what the problem is?
    Thanks,
    Leanne

    material is not extended to the sales org, etc., (see table MVKE) or you're supplying wrong combination of VKORG, VTWEG, SPART values.

Maybe you are looking for